Attachment 3 - 653-24-103 Spec Section 09 06 00 - R12112023.pdf

01-01-21

09 06 00 - i

SECTION 09 06 00

SCHEDULE FOR FINISHES

SECTION 09 06 00-SCHEDULE FOR FINISHES

VAMC: Roseburg

Location: Roseburg, OR

Project no. and Name:

Submission

Date:

09 06 00 - 2

SECTION 09 06 00

SCHEDULE FOR FINISHES

PART 1 - GENERAL

1.1 DESCRIPTION

A. This section contains a coordinated system in which requirements for materials specified in other sections shown are identified by abbreviated material names and finish codes in the room finish schedule or shown for other locations.

1.2 MANUFACTURERS

A. Manufacturer’s trade names and numbers used herein are only to identify colors, finishes, textures and patterns. Products of other manufacturer’s equivalent to colors, finishes, textures and patterns of manufacturers listed that meet requirements of technical specifications will be acceptable upon approval in writing by contracting officer for finish requirements.

1.3 SUBMITALS

A. Submit in accordance with SECTION 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES provide quadruplicate samples for color approval of materials and finishes specified in this section.

1.4 APPLICABLE PUBLICATIONS

A. Publications listed below form a part of this specification to the extent referenced. Publications are referenced in text by basic designation only.

B. MASTER PAINTING INSTITUTE: (MPI)

6/1/2019................Architectural Painting Specification Manual

PART 2 - PRODUCTS

2.1 DIGITAL COLOR PHOTOS – NOT USED

2.2 DIVISION 31 – EARTHWORK – NOT USED

2.3 DIVISION 03 – CONCRETE – NOT USED

09 06 00 - 3

2.4 DIVISON 04 – MASONRY – NOT USED

2.5 DIVISION 05 – METALS – NOT USED

2.6 DIVISION 06 WOOD, PLASTICS, AND COMPOSITES – NOT USED

2.7 DIVISION 07 - THERMAL AND MOISTURE PROTECTION – NOT USED

2.8 DIVISION 08 – OPENINGS – NOT USED

2.9 DIVISION 09 - FINISHES

A. SECTION 09 51 00, ACOUSTICAL CEILINGS

Finish Code Component Color Pattern Manufacturer Mfg Name/No.

Ceiling Ceiling Tile White Armstrong Fine Fissured #1732

Ceiling Ceiling Grid White Armstrong Prelude XL #7301

B. SECTION 09 65 16, [ RESILIENT SHEET FLOORING], HEAT WELDED SEAMS (WSF)

Finish Code Pattern name Manufacturer Mfg. Color Name/No.

Flooring Juniperus II Mohawk Mystic

09 06 00 - 4

C. SECTION 09 65 13, RESILIENT BASE AND ACCESSORIES

Finish Code Item Height Manufacturer Mfg Name/No.

Wall Base Rubber Base (RB) 6” Johnsonite Tarkett “Pebble” #32

SECTION 09 91 00, PAINTING

1. MPI Gloss and Sheen Standards

Gloss @60 Sheen @85

Gloss Level 1 a traditional matte finish-flat max 5 units, and max 10 units

Gloss Level 2 a high side sheen flat-“a velvet-like” max 10 units, and finish 10-35 units

Gloss Level 3 a traditional “egg-shell like” finish 10-25 units, and 10-35 units

Gloss Level 4 a “satin-like” finish 20-35 units, and min. 35 units

Gloss Level 5 a traditional semi-gloss 35-70 units

Gloss Level 6a traditional gloss 70-85 units

Gloss level 7 a high gloss more than 85 units

2. Paint code Gloss Manufacturer Mfg. Color Name/No.

Wall Paint 3 – “egg-shell” Sherwin Williams TBD from VA standard Colors

Door/Door Frame 5 – “semi-gloss” Sherwin Williams TBD from VA standard Colors

2.10 DIVISION 10 – SPECIALTIES – NOT USED

2.11 DIVISION 11 – EQUIPMENT – NOT USED

2.12 DIVISION 12- FURNISHINGS – NOT USED

2.13 DIVISION 13 - SPECIAL CONSTRUCTION – NOT USED

2.14 DIVISION 14 – CONVEYING EQUIPMENT – NOT USED

09 06 00 - 5

2.15 DIVISION 22 – PLUMBING – NOT USED

2.16 DIVISON 26 – ELECTRICAL – NOT USED

PART 3 - EXECUTION

3.1 FINISH SCHEDULES & MISCELLANEOUS ABBREVIATIONS

3.2 FINSIH SCHEDULE SYMBOLS

Symbol Definition

** Same finish as adjoining walls

- No color required

E Existing

XX To match existing

EFTR Existing finish to remain

RM Remove

3.3 ROOM FINISH SCHEDULE

A. Match adjoining or existing similar surfaces colors, textures or patterns where disturbed or damaged by alterations or new work when not scheduled.

B. ROOM FINISH SCHEDULE – see drawings

--- E N D---