SOW - Audiometric Booths.pdf

STATEMENT OF WORK (SOW)

Background

The Eastern Oklahoma Veterans Health Care System has a need for 3 Audiometric Booths for the administration of hearing testing to our Veterans.

Description

The 40a Classic Series Single-Wall (individual room) construction is a single or multiple occupancy room constructed of 4” thick modular panels, complete with carpeted vibration isolated floor, space-saver roof mounted ventilation, recessed electrical, Noise-Lock® doors and double-glazed windows, audiometric jack panels acoustically matched and shipped ready for field assembly.

NIC 50

NIC 53 with 1” Enhancement Package

Panel Construction:

Noise-Lock® V (walls) and Noise-Lock® VI (ceiling)

Panel Size:

Maximum panel size to be determined by customer for adequate site access.

Interior Surfaces:

22ga. galvanized perforated steel

Exterior Surfaces:

14ga. cold rolled solid steel

Floor Interior Surface:

11ga. hot rolled steel

Finish:

Textured powder coated

Door:

(1) 2’-9” wide x 6’-1½” high clear opening cam lift Split frame with push plate and pull handles

Note:

Dimensions locating door are shown to the clear opening Noise-Lock® STC-51

Window:

(1) 2’-6” wide x 2’-10” high aluminum frame double glazed with ¼” thick laminated safety glass (width reduced on smaller models)

Booth Vibration Isolation:

Vibration isolator rails to be provided below floor panels

Electrical:

• 120 V recessed LED light fixture

• 120 V toggle switch for fans and lights

• 120 V duplex receptacle

Note:

Customer to provide 110V, 60Hz, 20-amp power to roof mounted quad receptacle power cord All electrical is wired per 2002 national electric code Booth is factory UL certified and labeled (Lot) boxes, connectors, etc. as required for complete installation

Audiometric Jack Panel Comprised of:

• (12) Switch craft three-wire phone-type jacks

• (2) USB ports

• 2” ID passthrough hole with cover

Booth Options:

Ventilation:

Integrated Space Saver exhaust/inlet air ceiling silencer panels and 120V, 60Hz, 14w fans or HVAC connection collars to connect to building system

Floor Covering:

• Nylon carpet, to match paint color selection with

• 3/8” thick underlayment and 2-1/2” H black cove

• base molding included

Site Requirements:

• Customer to provide a finished floor which is within +/- ¼” of level in 10 non-cumulative feet

• 2” minimum clearance is required between the exterior of testing booth and host facility walls

/ceiling

Doors:

• Noise-Lock® double-glazed windows in door

• 12” x 12” View Port

• 16” x 24” Side Light

• 20” x 60” Full Glass

• Additional & oversized doors including double leaf

• Wood veneered door finishes

• Mortised type, lever handle, recessed key locks

• Door closers

Standard Enhancement Packages:

• Enhancement packages available with choice of fabric & liner colors

• Paneling & carpeting in 5 colors

• Absorptive & aesthetic fabric top paneling

• Space-enhancing chair-rail

• Edge-smoothing corner panels

Exterior Enhancement Packages:

• Exterior enhancement packages available with Wood Trends by Sound Seal

• Aesthetically pleasing finishes that show off the beauty of real wood

• Available in a variety of popular as well as exotic wood veneer species (additional veneer

• options available upon request)

Optional Equipment:

• One-way Noise-Lock® glass

• One-way Noise-Lock® glass on sliding rails

• RF & electromagnetic shielding

• Special jack-panels

• Pass throughs

• Fire rated outer walls and doors

Eye

Delivery

Warehouse: Jack C Montgomery VAMC

1011 Honor Heights Drive

Muskogee, OK 74401

Scope

The contractor will have all the products delivered to Jack C. Montgomery VAMC.

Contractor delivery of equipment shall take place between the hours of 0800 -1500, Monday through Friday. Contractor shall not be required, nor is authorized to perform any work on the following U.S. Government Federal holidays:

New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, Christmas Day

POC

• Matt Keefe – Supervisory Acquisition Specialist

• Judy Chambers- Acquisition Utilization Specialist

CONTRACTOR FURNISHED ITEMS AND RESPONSIBILITIES

The Contractor shall furnish all supplies, equipment, facilities and services required to perform the service under this contract. The Contractor shall perform all work in accordance with this Statement of Work.

NON-PERSONAL SERVICE STATEMENT

END OF STATEMENT OF WORK