flag poles specs.docx

DOCX document 90 KB Posted

Attached to
Z1PZ--36C257-24-AP-3909 | NEW | CTX Flagpole Renovation Federal contract opportunity
Solicitation number
36C25724Q0757
Issued by
Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 17

About this file

Written by GovTribe AI ·

The provided document appears to be a specification sheet for commercial-grade flagpoles. The key details are:

  • The flagpoles are 25 feet tall, with a 5-inch butt diameter tapering to 3 inches at the top
  • The poles are made of seamless 6063-T6 aluminum with a 0.125-inch wall thickness
  • They have a black anodized finish and are backed by a lifetime warranty
  • The poles include an external halyard and pulley system for easy raising and lowering of the flag
  • They can withstand wind speeds up to 96 mph when unflagged
  • The components included are a 5-inch gold flagpole topper, single revolving truck, halyard, two brass snap hooks, cast aluminum cleat, flash collar, and PVC ground sleeve
  • The requestor requires 25 of these flagpoles.

View the file

Other files for this federal contract opportunity

Other files attached to Z1PZ--36C257-24-AP-3909 | NEW | CTX Flagpole Renovation, newest first.
File Type Posted
36C25724Q0757 0001_1.docx DOCX document
Technical Questions-Answers 36C25724Q0757.docx DOCX document
flag poles specs.docx DOCX document
36C25724Q0757_1.docx DOCX document
P07 SAM WD - 2015-5237 Rev 24 4-19-24 CTX.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

· black anodized finish

· 5” inch butt diameter / 3” at the top diameter

· Seamless 6063-T6 aluminum with a wall thickness of 0.125"

· Shaft backed by Carrot-Top’s lifetime warranty

· Easily raises and lower your flag with an external halyard and pulley system

· Holds up against wind speeds up to 96mph when unflagged

· Made in the USA Components Included in our One-Piece 30-Foot Flagpole - (The Engineering supervisor said he wants 25 foot poles. He said the all the other specs are the same.)

Each 30-foot commercial flagpole includes the following components. You can contact our Flag Pros if you wish to upgrade your truck, collar, or ball finial. Depending on the flagpole finish selected, the truck, halyard and cleat will come with a matching finish.

· 5” gold flagpole topper

· Single revolving truck

· Halyard

· Two brass snap hooks

· Cast aluminum cleat

· Flash collar

· PVC ground sleeve image1.jpeg image2.jpeg image3.jpeg

File details come from the government source that posted it. Updated .