36C25718Q0448-000.docx

FedBizOpps Combined Synopsis/Solicitation Notice

CLASSIFICATION CODE

SUBJECT

CONTRACTING OFFICE'S

ZIP-CODE

SOLICITATION NUMBER

RESPONSE DATE (MM-DD-YYYY)

ARCHIVE

DAYS AFTER THE RESPONSE DATE

RECOVERY ACT FUNDS

SET-ASIDE

NAICS CODE

CONTRACTING OFFICE

ADDRESS

POINT OF CONTACT

(POC Information Automatically Filled from User Profile Unless Entered)

DESCRIPTION

See Attachment

AGENCY'S URL

URL DESCRIPTION

AGENCY CONTACT'S EMAIL

ADDRESS

EMAIL DESCRIPTION

ADDRESS

POSTAL CODE

COUNTRY

ADDITIONAL INFORMATION

GENERAL INFORMATION

PLACE OF PERFORMANCE

* = Required Field FedBizOpps Combined Synopsis/Solicitation Notice Rev. March 2010 549-18-2-014-0136 - Depuy Synthes Matrix Midface Michael Simington 78229 36C25718Q0448 02-22-2018 N 339113 Department of Veterans Affairs VISN17 Network Contracting Activity 7400 Merton Minter Blvd. (10N17/90C) San Antonio TX 78229 Michael Simington 210-694-6241 michael.simington@va.gov

VA NORTH TEXAS HCS

DALLAS VA MEDICAL CENTER

4500 S. LANCASTER RD.

BA-102 SPS

DALLAS, TX

75216 michael.simington@va.gov michael.simington@va.gov This is a Combined Synopsis/Solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotes are being requested and a written solicitation will not be issued. The solicitation number is 36C25718Q0448. This acquisition is issued as a Request for Quote (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83, effective November 06, 2017. The associated North American Industrial Classification System Code (NAICS) for this procurement is 339113 with a small business standard of 750 employees. This acquisition is solicited as a 100% set-aside for small business, but SDVOSB’s have first priority, then VOSB’s have second priority, then lastly Small Businesses.

Network Contracting Office 17 requests responses from qualified sources capable of providing the following item(s):

ITEM NO. DESCRIPTION QUANTITY UNIT ESTIMATED

OR STOCK NO. UNIT COST

04.503.224.05

5 1 TI MATRIXMIDFACE SCREW SELF-DRILLING

4MM 48 EA

04.503.225.05

5 2 TI MATRIXMIDFACE SCREW SELF-DRILLING

5MM 48 EA

04.503.226.05

5 3 TI MATRIXMIDFACE SCREW SELF-DRILLING

6MM 48 EA

04.503.228.05

5 4 TI MATRIXMIDFACE SCREW SELF-DRILLING

8MM 48 EA

04.503.210.05

5 5 TI MATRIXMIDFACE SCREW SELF-TAPPING

10MM 18 EA

04.503.212.05

5 6 TI MATRIXMIDFACE SCREW SELF-TAPPING

12MM 12 EA

04.503.216.05

5 7 TI MATRIXMIDFACE SCREW SELF-TAPPING

16MM 6 EA

04.503.218.05

5 8 TI MATRIXMIDFACE SCREW SELF-TAPPING

18MM 6 EA

04.503.234.01

1 9 TI MATRIXMIDFACE EMERGENCY SCREW 4MM 48 EA

04.503.235.01

1 10 TI MATRIXMIDFACE EMERGENCY SCREW

5MM 48 EA

04.503.236.01

1 11 TI MATRIXMIDFACE EMERGENCY SCREW

6MM 48 EA

04.503.238.01

1 12 TI MATRIXMIDFACE EMERGENCY SCREW

8MM 48 EA

04.503.240.01

1 13 TI MATRIXMIDFACE EMERGENCY SCREW

10MM 18 EA

04.503.242.01

1 14 TI MATRIXMIDFACE EMERGENCY SCREW

12MM 12 EA

04.503.244.01

1 15 TI MATRIXMIDFACE EMERGENCY SCREW

14MM 6 EA

04.503.246.01

1 16 TI MATRIXMIDFACE EMERGENCY SCREW

16MM 6 EA

04.503.248.01

1 17 TI MATRIXMIDFACE EMERGENCY SCREW

18MM 6 EA

04.503.083 18 TI MATRIXNEURO CONTOUR MESH 100MM X

100MM/0.4MM MALLEABLE 3 EA

04.503.084 19 TI MATRIXNEURO CONTOUR MESH 100MM X

100MM/0.4MM RIGID 3 EA

04.503.301 20 TI MATRIXMIDFACE ORBITAL FLOOR

PLATE-ANATOMIC SMALL/0.3MM THK 6 EA

04.503.302 21 TI MATRIXMIDFACE ORBITAL FLOOR

PLATE-ANATOMIC MED/0.3MM THICK 6 EA

04.503.303 22 TI MATRIXMIDFACE ORBITAL FLOOR

PLATE-ANATOMIC LARGE/0.3MM THK 6 EA

04.503.304 23 TI MATRIXMIDFACE UNIV ORBITAL FLOOR

PLATE/0.4MM THICK 6 EA

04.503.305 24 TI MATRIXMIDFACE UNIV MEDIAL WALL

PLATE/0.5MM THICK 6 EA

04.503.306 25 TI MATRIXMIDFACE ORBITAL MESH

PLATE/0.2MM THICK 6 EA

04.503.307 26 TI MATRIXMIDFACE ORBITAL MESH

PLATE/0.3MM THICK 6 EA

04.503.308 27 TI MATRIXMIDFACE ORBITAL MESH

PLATE/0.4MM THICK 6 EA

04.503.313 28 TI MATRIXMIDFACE ORBITAL RIM

PLATE/12 HOLES/0.4MM THICK 9 EA

04.503.343 29 TI MATRIXMIDFACE ORBITAL RIM

PLATE/12 HOLES/0.5MM THICK 9 EA

04.503.373 30 TI MATRIXMIDFACE ORBITAL RIM

PLATE/12 HOLES/0.7MM THICK 9 EA

04.503.316 31 TI MATRIXMIDFACE ADAPTION PLATE/20

HOLES/0.4MM THICK 6 EA

04.503.346 32 TI MATRIXMIDFACE ADAPTION PLATE/20

HOLES/0.5MM THICK 6 EA

04.503.376 33 TI MATRIXMIDFACE ADAPTION PLATE/20

HOLES/0.7MM THICK 6 EA

04.503.396 34 TI MATRIXMIDFACE ADAPTION PLATE/20

HOLES/0.8MM THICK 6 EA

04.503.317 35 TI MATRIXMIDFACE Y-PLATE 1X3

HOLES/0.4MM THICK 6 EA

04.503.347 36 TI MATRIXMIDFACE Y-PLATE 1X3

HOLES/0.5MM THICK 6 EA

04.503.318 37 TI MATRIXMIDFACE DOUBLE Y-PL 6

HOLES/0.4MM THICK 6 EA

04.503.377 38 TI MATRIXMIDFACE Y-PLATE 1X3

HOLES/0.7mm thick 6 EA

04.503.348 39 TI MATRIXMIDFACE DOUBLE Y-PL 6

HOLES/0.5MM THICK 6 EA

04.503.378 40 TI MATRIXMIDFACE DOUBLE Y-PL 6

HOLES/0.7MM THICK 6 EA

04.503.330 41 TI MATRIXMIDFACE BOX PLATE 4

HOLES/5MMX10MM/0.4MM THICK 6 EA

04.503.360 42 TI MATRIXMIDFACE BOX PLATE 4

HOLES/5MMX10MM/0.5MM THICK 6 EA

04.503.390 43 TI MATRIXMIDFACE BOX PLATE 4

HOLES/5MMX10MM/0.7MM THICK 6 EA

04.503.331 44 TI MATRIXMIDFACE BOX PLATE 4

HOLES/10MMX10MM/0.4MM THICK 6 EA

04.503.361 45 TI MATRIXMIDFACE BOX PLATE 4

HOLES/10MMX10MM/0.5MM THICK 6 EA

04.503.391 46 TI MATRIXMIDFACE BOX PLATE 4

HOLES/10MMX10MM/0.7MM THICK 6 EA

04.503.332 47 TI MATRIXMIDFACE X-PLATE 4

HOLES/0.4MM THICK 6 EA

04.503.362 48 TI MATRIXMIDFACE X-PLATE 4

HOLES/0.5MM THICK 6 EA

04.503.392 49 TI MATRIXMIDFACE X-PLATE 4

HOLES/0.7MM THICK 6 EA

04.503.333 50 TI MATRIXMIDFACE STRUT PLATE 18

HOLES/0.4MM THICK 6 EA

04.503.363 51 TI MATRIXMIDFACE STRUT PLATE 18

HOLES/0.5MM THICK 6 EA

04.503.393 52 TI MATRIXMIDFACE STRUT PLATE 18

HOLES/0.7MM THICK 6 EA

04.503.323 53 TI MATRIXMIDFACE OBLIQUE L-PL 2X3

HOLES-LEFT/0.5MM THICK 9 EA

04.503.353 54 TI MATRIXMIDFACE OBLIQUE L-PL 2X3

HOLES-LEFT/0.7MM THICK 9 EA

04.503.383 55 TI MATRIXMIDFACE OBLIQUE L-PL 2X3

HOLES-LEFT/0.8MM THICK 9 EA

04.503.324 56 TI MATRIXMIDFACE OBLIQUE L-PL 2X3

HOLES-RIGHT/0.5MM THICK 9 EA

04.503.354 57 TI MATRIXMIDFACE OBLIQUE L-PL 2X3

HOLES-RIGHT/0.7MM THICK 9 EA

04.503.384 58 TI MATRIXMIDFACE OBLIQUE L-PL 2X3

HOLES-RIGHT/0.8MM THICK 9 EA

04.503.325 59 TI MATRIXMIDFACE OBLIQUE L-PL 3X4

HOLES-LEFT/0.5MM THICK 9 EA

04.503.355 60 TI MATRIXMIDFACE OBLIQUE L-PL 3X4

HOLES-LEFT/0.7MM THICK 9 EA

04.503.385 61 TI MATRIXMIDFACE OBLIQUE L-PL 3X4

HOLES-LEFT/0.8MM THICK 9 EA

04.503.326 62 TI MATRIXMIDFACE OBLIQUE L-PL 3X4

HOLES-RIGHT/0.5MM THICK 9 EA

04.503.356 63 TI MATRIXMIDFACE OBLIQUE L-PL 3X4

HOLES-RIGHT/0.7MM THICK 9 EA

04.503.386 64 TI MATRIXMIDFACE OBLIQUE L-PL 3X4

HOLES-RIGHT/0.8MM THICK 9 EA

04.503.334 65 TI MATRIXMIDFACE OBLIQUE L-PL 4X6

HOLES-LEFT/0.5MM THICK 9 EA

04.503.364 66 TI MATRIXMIDFACE OBLIQUE L-PL 4X6

HOLES-LEFT/0.7MM THICK 9 EA

04.503.394 67 TI MATRIXMIDFACE OBLIQUE L-PL 4X6

HOLES-LEFT/0.8MM THICK 9 EA

04.503.335 68 TI MATRIXMIDFACE OBLIQUE L-PL 4X6

HOLES-RIGHT/0.5MM THICK 9 EA

04.503.365 69 TI MATRIXMIDFACE OBLIQUE L-PL 4X6

HOLES-RIGHT/0.7MM THICK 9 EA

04.503.395 70 TI MATRIXMIDFACE OBLIQUE L-PL 4X6

HOLES-RIGHT/0.8MM THICK 9 EA

04.503.327 71 TI MATRIXMIDFACE T-PLATE 3X4

HOLES/0.5MM THICK 6 EA

04.503.357 72 TI MATRIXMIDFACE T-PLATE 3X4

HOLES/0.7MM THICK 6 EA

04.503.387 73 TI MATRIXMIDFACE T-PLATE 3X4

HOLES/0.8MM ThICK 6 EA

04.503.322 74 TI MATRIXMIDFACE H-PLATE 11

HOLES/0.5MM THICK 6 EA

04.503.352 75 TI MATRIXMIDFACE H-PLATE 11

HOLES/0.7MM THICK 6 EA

04.503.382 76 TI MATRIXMIDFACE H-PLATE 11

HOLES/0.8MM THICK 6 EA

03.503.201 77 MATRIXMIDFACE SCREWDRIVER BLD HEX

COUPLING/SELF-RETAIN/52MM 6 EA

03.503.202 78 MATRIXMIDFACE SCREWDRIVER BLD HEX

COUPLING/SELF-RETAIN/76MM 6 EA

03.503.203 79 MATRIXMIDFACE SCREWDRIVER BLD HEX

COUPLING/SELF-RETAIN/96MM 6 EA

311.005 80 SCREWDRIVER HANDLE WITH HEX

COUPLING-SMALL 3 EA

311.006 81 SCREWDRIVER HANDLE WITH HEX

COUPLING-Medium 6 EA

03.503.244 82 MATRIX 1.1MM DRILL BIT J-LATCH/4MM

STOP/44.5MM 6 EA

03.503.246 83 MATRIX 1.1MM DRILL BIT J-LATCH/6MM

STOP/44.5MM 6 EA

03.503.248 84 MATRIX 1.1MM DRILL BIT J-LATCH/8MM

STOP/44.5MM 6 EA

03.503.110 85 MATRIX 1.1MM DRILL BIT J-LATCH/10MM

STOP/44.5MM 6 EA

03.503.112 86 MATRIX 1.1MM DRILL BIT J-LATCH/12MM

STOP/44.5MM 6 EA

03.503.118 87 MATRIX 1.1MM DRILL BIT J-LATCH/18MM

STOP/44.5MM 6 EA

03.503.120 88 MATRIX 1.1MM DRILL BIT J-LATCH/80MM 6 EA

03.503.121 89 MATRIX 1.1MM DRILL BIT

J-LATCH/125MM 6 EA

03.503.037 90 MESH CUTTING SCISSORS LONG NOSE 3 EA

03.503.034 91 MINI PLATE HOLDER LONG 3 EA

03.503.035 92 IN-PLANE BENDER FOR MATRIXMIDFACE

PLATES 3 EA

03.503.038 93 PLATE BENDER FOR MIDFACE PLATES 6 EA

03.503.039 94 PLATE CUTTER FOR MIDFACE PLATES 3 EA

03.507.000 95 T-HANDLE HXC-SMALL 3 EA

03.507.003 96 3.5MM THREADED REDUCTION TOOL

SELF-TAPPING 78MM HEX 3 EA

03.507.005 97 2.4MM DRILL GUIDE 3 EA

310.572 98 2.4MM DRILL BIT STRYKER

J-LATCH/75MM 3 EA

312.155 99 1.5MM DRILL GUIDE 3 EA

306.601 100 GRAPHIC CASE FOR MATRIXMIDFACE

SYSTEM 3 EA

306.610 101 MATRIX AUXILIARY MODULE/SMALL

MANDIBLE/MIDFACE/ORTHOGNATHIC 6 EA

306.614 102 0.4MM PLATE MODULE INSERT FOR

MATRIXMIDFACE SYSTEM 3 EA

306.615 103 0.5MM PLATE MODULE INSERT FOR

MATRIXMIDFACE SYSTEM 3 EA

306.617 104 0.7MM PLATE MODULE INSERT FOR

MATRIXMIDFACE SYSTEM 3 EA

306.618 105 0.8MM PLATE MODULE INSERT FOR

MATRIXMIDFACE SYSTEM 3 EA

306.616 106 SCREW MODULE F/MATRIXMIDFACE WITH

REVERSIBLE SCREW INSERT 3 EA

303.619 107 ORBITAL PLATE AND MESH MODULE FOR

MATRIXMIDFACE SYSTEM 3 EA

306.626 108 INSTRUMENT TRAY FOR MATRIXMIDFACE

SYSTEM 3 EA

306.627 109 DRILL BITS AND BLADES MODULE FOR

MATRIXMIDFACE SYSTEM 3 EA

304.104W 110 SCREW LENGTH MARKER FOR 4MM

SELF-DRILLING SCREWS 24 EA

304.105W 111 SCREW LENGTH MARKER FOR 5MM

SELF-DRILLING SCREWS 24 EA

304.106W 112 SCREW LENGTH MARKER FOR 6MM

SELF-DRILLING SCREWS 24 EA

304.108W 113 SCREW LENGTH MARKER FOR 8MM

SELF-DRILLING SCREWS 24 EA

304.104 114 SCREW LENGTH MARKER FOR-4MM 3 EA

304.106 115 SCREW LENGTH MARKER FOR-6MM 3 EA

304.108 116 SCREW LENGTH MARKER FOR-8MM 3 EA

304.110 117 SCREW LENGTH MARKER FOR-10MM 3 EA

304.112 118 SCREW LENGTH MARKER FOR-112MM 3 EA

304.114 119 SCREW LENGTH MARKER FOR-14MM 3 EA

304.116 120 SCREW LENGTH MARKER FOR-16MM 3 EA

304.118 121 SCREW LENGTH MARKER FOR-18MM 3 EA

306.628 122 LABEL SHEET FOR DRILLS/BLADES

MATRIXMIDFACE SYSTEM 3 EA

306.630 123 LABEL SHEET F/MODULE 306.610

MATRXMAND/MIDFACE/ORTHOGNATHIC 3 EA

306.634 124 LABEL SHEET FOR 0.4MM PLATES

MATRIXMIDFACE SYSTEM 3 EA

306.635 125 LABEL SHEET FOR 0.5MM PLATES

MATRIXMIDFACE SYSTEM 3 EA

306.636 126 LABEL SHEET FOR SCREWS

MATRIXMIDFACE SYSTEM 3 EA

306.637 127 LABEL SHEET FOR 0.7MM PLATES

MATRIXMIDFACE SYSTEM 3 EA

306.638 128 LABEL SHEET FOR 0.8MM PLATES

MATRIXMIDFACE SYSTEM 3 EA

306.639 129 LABEL SHEET FOR ORBITAL PLATES

MATRIXMIDFACE SYSTEM 3 EA

306.522 130 LABEL SHEET FOR MATRIXNEURO MODULE 3 EA

304.105 131 SCREW LENGTH MARKER-5MM 3 EA

60.511.020 132 LABEL SHEET FOR MATRIX SYSTEM

STRENGTH GRADIENTS 3 EA

03.503.801 133 ORBITAL RETRACTOR LEFT 3 EA

03.503.802 134 ORBITAL RETRACTOR RIGHT 3 EA

04.503.801 135 TI MATRIXMIDFACE PREFORMED ORBITAL

PLATE SMALL/LEFT 6 EA

04.503.802 136 TI MATRIXMIDFACE PREFORMED ORBITAL

PLATE LARGE/LEFT 6 EA

04.503.811 137 TI MATRIXMIDFACE PREFORMED ORBITAL

PLATE SMALL/RIGHT 6 EA

04.503.812 138 TI MATRIXMIDFACE PREFORMED ORBITAL

PLATE LARGE/RIGHT 6 EA

306.610 139 MATRIX AUXILIARY MODULE/SMALL

MANDIBLE/MIDFACE/ORTHOGNATHIC 3 EA

306.640 140 PLATE INSERT FOR MATRIXMIDFACE

GENERIC MODULE 3 EA

306.641 141 LABEL SHEET FOR PREFORMED ORBITAL

PLATES-MATRIXMIDFACE 3 EA

03.511.003 142 PLATE HOLDER FOR REVERSIBLE MATRIX

PLATES 3 EA

03.500.020 143 FILE WITH HEX COUPLING 3 EA

04.503.214.05

5 144 TI MATRIXMIDFACE SCREW

SELF-TAPPING 14MM 6 EA

TOTAL COST:

Delivery: ________Days after award Delivery to the VA North Texas HCS, Dallas VA Medical Center, 4500 S. Lancaster Rd., Dallas, TX 75216.

Company name:___________ Company DUNS number:___________ Point of contact:___________ Telephone:___________ This requirement is being solicited on a BRAND NAME OR EQUAL basis in accordance with FAR 52.211-6 Brand Name or Equal. Any ‘Or Equal’ product MUST be submitted with product specifications. The end user is the final deciding authority of any technical evaluation.

The following FAR and VAAR Clauses and provisions in their latest editions apply to this solicitation.

52.212-1, Instructions to Offerors-Commercial Items.

52.212-2, Evaluation Commercial Items. Technical acceptability to meet the Governments requirement, Past performance, delivery and price. Technical and past performance, when combined are less important than price.

52.212-3 Offeror Representations and Certifications – Commercial Items. Offerors must include a completed copy of Representations and Certifications with their offer.

52.212-4 Contract Terms and Conditions - Commercial Items.

52.204-7 Central Contractor Registration 52.219-6, Notice of Total Small Business Set-Aside 52.219-13, Notice of Set-Aside Orders 52.222-50 Combatting Trafficking in Persons 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.233-3 Protest After Award 52.233-4 Applicable Law for Breach of Contract Claim

The following clauses will be incorporated in full text.

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items The following clauses shall be considered marked within 52.212-5 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards 52.209-6 Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment.

52.222-3, Convict Labor 52.222-19, Child Labor – Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-22 Previous Contracts Compliance Report 52.222-25 Affirmative Action Compliance 52.222-26 Equal Opportunity 52.222-36, Affirmative Action for Workers with Disabilities 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration 52.219-28, Post Award Small Business Program Representation 52.252-1, Solicitation Provisions Incorporated by Reference http://www.acquisition.gov/far/ http://www.va.gov/oal/library/vaar/ 52.252-2, Clauses Provisions Incorporated by Reference http://www.acquisition.gov/far/ http://www.va.gov/oal/library/vaar/ 852.203-70, Commercial Advertising 852.211-70 Service Data Manuals 852.237-70 Contractor Responsibilities 852.246-70 Guarantee 852.273-74, Awards Without Exchanges

The Government intends to award a firm fixed price contract resulting from this combined synopsis/solicitation. All offerors must be registered in the System for Award Management (SAM) prior to award (www.sam.gov). Quotes are being requested and a written solicitation will not be issued. Paper copies of this solicitation will not be issued and telephone requests or fax requests for the solicitation will not be accepted.

Quotes must include company name, company DUNS number, Tax ID, and point of contact information.

All responsible sources should submit quotes to Michael Simington via e-mail: michael.simington@va.gov by Thursday, 22 February 2018, 3:00PM CST.