Question and Answer Sheet.docx
DOCX document 1 MB Posted
- Attached to
- 4110--Blast Chiller Federal contract opportunity
- Solicitation number
- 36C25626Q1086
About this file
This is a Question and Answer Sheet documenting site-specific information gathered for a blast chiller replacement project at a Department of Veterans Affairs facility. The existing equipment measures 39 inches deep by 49 inches wide by 86 inches high, with available installation space of 39 inches deep by 55 inches wide by 108 inches to ceiling, though clearance requirements remain uncertain. The unit must be positioned on its side to fit through kitchen access points, and freight elevators are available at the loading dock. The facility has a dedicated 30-amp circuit breaker with dual 115/208-230V, 60Hz single-phase electrical service at the blast chiller location. Installation requires anchoring into concrete, connection to an existing floor drain, and complete removal and disposal of the old unit and all associated refrigeration components by the contractor. Work must accommodate continuous kitchen operations seven days per week from 5:30 a.m. to 7:30 p.m., requiring a dust barrier during installation. No existing mechanical or electrical drawings, equipment data plates, or site sketches are available to assist vendors with accurate quotation preparation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 36C25626Q1086 0002_1.docx | DOCX document | |
| 36C25626Q1086 0002.pdf | ||
| 36C25626Q1086 Amendment 0001.pdf | ||
| 36C25626Q1086 0001_1.docx | DOCX document | |
| 36C25626Q1086 - Final.pdf | ||
| Site Vist Information Sheet.docx | DOCX document | |
| 36C25626Q1086_1.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1. Any photographs, including photos of the existing QC2-100R blast chiller, surrounding installation area, remote condensing unit, electrical connections, refrigeration piping, drain connection, and delivery/removal path?
a. No
2. Dimensions of the existing blast chiller and the available footprint/clearance for the replacement unit?
a. 39”D x 49 ½” W x 86” H (existing unit) Space available 39”D x 55” W x 108” to the ceiling ( unsure of clearance needed)
3. Doorway, hallway, loading dock, elevator, and other access dimensions that could affect delivery and removal of the equipment?
a. Freight elevators located by loading dock, but unit will have to be placed on it side to fit into the kitchen
4. Existing electrical service available at both the blast chiller and condensing-unit locations, including voltage, phase, panel location, breaker size, and approximate wiring distance, if available?
a. For the blast chiller There is a dedicated 30 amp circuit breaker and a dual 115/ 208-230v 60Hz single Phase junction box (please see pictures below)
5. Existing drain location and whether any drain modifications are anticipated?
a. Existing floor drain
6. Floor construction and any specific anchoring or bolting requirements for the new unit?
a. Anchoring into concrete is required
7. Whether the existing condensing unit, refrigeration piping, and associated components are also expected to be removed and disposed of by the contractor?
a. The old unit is completely removed
8. Which utility disconnections the VA expects to complete prior to contractor arrival versus those that will remain the contractor’s responsibility?
a. The old unit is completely removed
9. Any site-specific infection-control, dust-containment, work-hour, or access restrictions discussed during the site visit that could affect installation pricing?
a. We will need a dust barrier. The kitchen operational hours are 7 days a week 5:30am-7:30pm. We will have to work around the installation.
10. Any available mechanical/electrical drawings, equipment data plates, site sketches, measurements, or site-visit notes that may assist vendors in preparing an accurate quotation?
a. Unfortunately, No
11. Please see pictures below related to question 4:
image1.png image2.png image3.png image4.png image5.jpeg
File details come from the government source that posted it. Updated .