36C25221Q0537 0001_1.docx

Contract Opportunity Amendment to a Previous Combined Solicitation

PRODUCT SERVICE CODE

SUBJECT

CONTRACTING OFFICE'S

ZIP-CODE

SOLICITATION NUMBER

BASE NOTICE TYPE

RESPONSE DATE/TIME/ZONE

ARCHIVE

DAYS AFTER THE RESPONSE DATE

RECOVERY ACT FUNDS

SET-ASIDE

NAICS CODE

CONTRACTING OFFICE

ADDRESS

POINT OF CONTACT

(POC Information Automatically Filled from User Profile Unless Entered)

DESCRIPTION

See Attachment

AGENCY'S URL

URL DESCRIPTION

AGENCY CONTACT'S EMAIL

ADDRESS

EMAIL DESCRIPTION

ADDRESS

POSTAL CODE

COUNTRY

ADDITIONAL INFORMATION

GENERAL INFORMATION

PLACE OF PERFORMANCE

* = Required Field Contract Opportunity Amendment to a Previous Combined Solicitation Plumbing Fittings For Circulating Pumps 53214-1476 36C25221Q0537 04-08-2021 15:00

CENTRAL TIME, CHICAGO, USA

N 332913 Department of Veterans Affairs Great Lakes Acquisition Center (GLAC) 115 S 84th Street, Suite 101 Milwaukee WI 53214-1476 jeffrey.reed2@va.gov Jeff Reed jeffrey.reed2@va.gov 414-844-4800 x43221 Clement J. Zablocki VA Medical Center 5000 W. National Avenue Milwaukee

WI

53295-0001

USA

This is an amendment to Solicitation RFQ 36C25221Q0537 For Plumbing Fittings at the Clement J. Zablocki VA Medical Center, Milwaukee, WI.

5. PROJECT NUMBER (if applicable)

CODE

7.

ADMINISTERED BY

2. AMENDMENT/MODIFICATION NUMBER

CODE

6. ISSUED BY

8. NAME AND ADDRESS OF CONTRACTOR

4. REQUISITION/PURCHASE REQ. NUMBER

3. EFFECTIVE DATE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED

PAGE OF

PAGES

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED

BPA NO.

1. CONTRACT ID CODE

FACILITY CODE

CODE

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

E. IMPORTANT:

is extended,

(a) By completing Items 8 and 15, and returning __________ copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE

OF YOUR

ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY is not extended.

12. ACCOUNTING AND APPROPRIATION DATA

(REV. 11/2016)

is required to sign this document and return ___________ copies to the issuing office.

is not, A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

15C. DATE SIGNED

B. THE ABOVE NUMBERE

D CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES

SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendmen t, and is received prior to the opening hour and date specified.

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER

Contractor

16C. DATE SIGNED

14. DESCRIPTION OF AMENDMENT/MODIFICATION

16B. UNITED

STATES OF AMERICA

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER

16A. NAME AND TITLE OF

CONTRACTING OFFICER

15B. CONTRACTOR/OFFEROR

STANDARD FORM 30

PREVIOUS EDITION NOT USABLE

Prescribed by GSA - FAR (48 CFR) 53.243 (Type or print) (Type or print) (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

(Number, street, county, State and ZIP Code) (If other than Item 6) (Specify type of modification and authority) (such as changes in paying office, appropriation date, etc.)

(If required)

(SEE ITEM 11)

(SEE ITEM 13)

(X)

CHECK

ONE

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF

SOLICITATIONS

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

(Signature of person authorized to sign) (Signature of Contracting Officer) 695-21-2-6023-1115 36C252 Department of Veterans Affairs Great Lakes Acquisition Center (GLAC) 115 S 84th Street, Suite 101 Milwaukee WI 53214-1476 36C252 Department of Veterans Affairs Great Lakes Acquisition Center (GLAC) 115 S 84th Street, Suite 101 Milwaukee WI 53214-1476 To all Offerors/Bidders

36C25221Q0537 04-07-2021

X X X 04-08-2021 at 3:00 P.M. CST.

Please See Continuation Page for answers to the questions received.

Please note that the due date and time for quotes has been extended to April 8th at 3:00 P.M.

Central Standard Time.

David J. Picchi Contracting Officer

CONTINUATION PAGE

Question: #1 Please confirm (High Temp)? What temperatures are we working with? The "E" gaskets and EPDM Seats are good up to 230DEG F.

Answer: #1. All fittings are for medium-temperature hot water. Per our Utilities supervisor, water temperatures in the system should never exceed 165 degrees Fahrenheit. Seats/seals/gaskets rated to 230 degrees will work just fine. If given a choice, I always prefer to err on the side of caution, in this case go with higher temperature ratings than lower.

Question: #2 Line# 12 is asking for 3x1" Grooved x THRD 1000# Plated Nipple? Are you looking for a 1 dia x 3" long GxT XH SMLS Nipple?

Answer: #2. Line #12 should have the same characteristics as Ferguson part # 430910 – straight nipple; ductile iron; one end connection 3” male NPT; opposite end 3” grooved; rated to 1000 psi; plated.

Request: Please provide specifications for butterfly and check valves.

Answer: Butterfly valves should have the same or better specifications as Victaulic p/n V030761SE2 or Gruvlok p/n 7005011775 for the 3”, and Victaulic V100761SE3 for the 10”. – Must match ANSI and ASTM specs as these part numbers. Additionally, must have: ductile iron body construction; grooved ends; 300 psi rating; 230-250 degree Fahrenheit rating; EPDM valve seat material.

10” check valves should have the same or better specifications as Victaulic p/n V100716PE0. – Must match ANSI and ASTM specs as this part number. Additionally, must have: ductile iron body construction; grooved ends; 300 psi rating; 230-250 degree Fahrenheit rating.