36C25022Q0604_1.docx

DOCX document 16 KB Posted

Attached to
7350--EQUIPMENT - Ingred Table - 610
Solicitation number
36C25022Q0604
Issued by

View the file

Other files

File Type Posted
36C25022Q0604_2.docx DOCX document
36C25022Q0604.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Amendment to a Previous Combined Solicitation

Amendment to a Previous Combined Solicitation

SUBJECT*
Stainless Steel Ingred Table

GENERAL INFORMATION

CONTRACTING OFFICE’S ZIP CODE*
45409-1337
SOLICITATION NUMBER*
36C25022Q0604
RESPONSE DATE/TIME/ZONE
05-16-2022 12:00PM EASTERN TIME, NEW YORK, USA
ARCHIVE
30 DAYS AFTER THE RESPONSE DATE
RECOVERY ACT FUNDS
N
SET-ASIDE
SDVOSBC
PRODUCT SERVICE CODE*
7350
NAICS CODE*
332215
CONTRACTING OFFICE ADDRESS
Department of Veterans Affairs

Network Contract Office 10 (NCO 10)

3140 Governor’s Place Blvd. Suite 210 Kettering OH 45409-1337

POINT OF CONTACT*

Contract Specialist Aleshia Hines-Best Aleshia.Hines-Best@va.gov 937-262-2185

Northern Indiana Healthcare System

PLACE OF PERFORMANCE

ADDRESS

1700 E 38th Street.

Marion Indiana

POSTAL CODE
46953
COUNTRY
United States

ADDITIONAL INFORMATION

AGENCY’S URL

URL DESCRIPTION

AGENCY CONTACT’S EMAIL ADDRESS
Aleshia.Hines-Best@va.gov
EMAIL DESCRIPTION
Email

DESCRIPTION

The measurements for the table:

Worktable measures 26‐9" long x VARIES" wide x 36" high. The top is 14 gauge stainless steel with all four sides turned straight down 1‐1/2" and back 1/2" at 60 degrees from vertical. The base of the table is fully open and supported by 1‐5/8" O.D. x .065 thick stainless steel tubular legs fitted with stainless steel leg sockets and adjustable stainless steel bullet feet. The stainless steel shelf is continuously welded to the legs at approximately 10" off the finished floor with all four sides turned straight down 1‐1/2" and back 1/2" at 60 degrees from vertical.

Table to have 3 sinks, lever drain, small scrap basket, 12” back splash, 2 extra shelves on far right end, and marine edge, splash mount faucet and pre‐rinse.

The install shall include:

GILL MARKETING Model No. INSTALL Gill Marketing (GM) will install “L” shaped three compartment sink and table to include the following:

GM will disconnect plumbing from existing table.

GM will remove existing sink and table and move to loading dock to remain Government property.

GM will uncrate and set in place new “L” shaped sink.

GM will weld and polish one seam.

GM will install faucet and pre‐rinse spray units.

GM will make final utility connections to existing plumbing at terminating point on the same floor level.

VAMC to dispose of existing unit.

VAMC to verify proper sized utilities at terminating points on the same floor level.

*= Required Field
Amendment to a Previous Combined Solicitation

Page 1 of

Amendment to a Previous Combined Solicitation

File details come from the government source that posted it. Updated .