36C24818Q9770-001.docx

STATEMENT OF NEED

FOR CAMPUS EMERGENCY RESPONSE VEHICLE

Background:

The James A. Haley emergency response vehicle that is used to transport sick or injured patients on our campus to the emergency department, has reached its reliable use life expectancy and is in need of replacement. This vehicle is ten years old and beyond economical repair, it is no longer reliable, and a failure of this vehicle could pose a safety risk to patients and staff.

A new emergency response vehicle will facilitate the appropriate and timely assessment, intervention, and transport of patients suffering potential life-threatening situations on hospital grounds, promote staff safety and prevent injuries, as well as facilitate cost effectiveness in the reduction of utilization of county emergency response units.

Scope of work:

The contractor shall provide the listed deliverables and warranties if applicable.

Requirements:

The emergency transport unit and its associated equipment and accessories shall include the following:

CHASSIS AND CAB FEATURES

· 6 x 6 UTV Chassis – Modified

· Standard White Paint Color - Hood & Dash

· On Demand Six Wheel Drive with differential lock

· Power Steering (electronic controlled)

· Cab - Steel Mounted to ROPS Roll Bar w/ Windshield and Composite Doors

· Windshield Wiper

· Mirrors – Left, Right, and Rear View

· Backup Alarm

· Deep Cycle Battery, On Board Charger

· Auto Eject Shoreline

· Skirting - Aluminum Tread Plate w/ Rear Step Bumper

· Switch Panel - Four Position

· Air Conditioning

· 4000-Watt Generator 110/120v

· Insulation Package - Cab/Engine

· Siren and Speaker

· Tailpipe

ENCLOSED PATIENT COMPARTMENT FEATURES

· All Aluminum Construction

· Heavy Duty Extruded Frame

· Painted Interior –textured durable Finish (Non-insulated surfaces)

· Painted Exterior- Two tone (red and white)

· Bench Seat – 60” w/ Seat Belts, Seat Pads, Built in Storage

· Cot Mounting System

· Door - Side Access Door to Bench Storage

· Grab Handles – Interior (1) Entry Door and (1) Ceiling

· Grab Handles – (2) 30" Exterior Aluminum

· Windows - Tinted Auto Safety Glass w/ Slide Screen

· Insulation - Headliner Panel

· Insulation - Interior Wall Panels

· IV Holder - Rubber Style

· Outlet - 12 Volt Auxiliary

· Advanced Life Support (ALS) Supply/Equipment Cabinets– Upper & Lower

· Backboard Mounting Brackets

· Bench Seat – Back Pads - 60" (Wall Mounted)

· Rear Hinged Double Doors

· Outlet - 110 Volt

LIGHTING FEATURES

· Headlights-50-watt Quartz-Halogen

· LED Dome Lights - (1) in Cab, (1) in Patient Compartment

· Tail Lights

· LED Rear Scene/Load Light

· Turn Signals

· LED Emergency Lights – (1) Each Side, (2) Rear

· LED Light Bar w/ AC Shield

· LED Front Scene/Work Lights (Qty 2)

· LED Side Scene Lights

TIRES AND WHEELS

· Aluminum Wheels – 6 Wheels

· Turf/All-Trail Tires – 6 Tires

REQUIRED ADDITIONAL ITEMS

· Stryker Power Cot (this cot is interchangeable with cots already in use at facility)

· Graphics (final design upon award)

· Shipping

SIZE REQUIREMENTS

· Height 93 inches at highest point

· Wheel base 105 to 115 inches (approx.)

· Load deck height 30.5 inches

· Maximum width at mirrors 80 inches

· Seating for two attendants and a driver

PERFORMANCE REQUIREMENTS

· 760 to 800cc EFI, 40 HP, 40 MPH

· Climb and hold on a 31-degree slope

· Maintain stability on 24-degree side slope