36C24818Q0454-002.docx
DOCX document 61 KB Posted
- Attached to
- Medical Supply - Craniofacial Set for Mid-Face
- Solicitation number
- 36C24818Q0454
About this file
36C24818Q0454 COMBINED SYNOPSIS SOLICITATION_36C248-18-Q-0454.docx
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 36C24818Q0454-00001000.docx | DOCX document | |
| 36C24818Q0454-00001001.pdf | ||
| 36C24818Q0454-000.docx | DOCX document | |
| 36C24818Q0454-001.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
(i) In accordance with FAR Part 13, this combined synopsis/solicitation for commercial items is prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. The Department of Veterans Affairs, Orlando Veterans Affairs Health Care System has a need to procure Craniofacial Set for Mid-Face – 2 complete sets.
(ii) This is a combined synopsis and constitutes the only solicitation; a written solicitation will not be issued. Request for Quotation (RFQ) is issued under number 36C24818Q0454.
(iii) The RFQ provisions and clauses incorporated are those in effect through the Federal Acquisition Circular 2005 - 97 / 01-24-2018.
(iv) The combined synopsis solicitation is Set-aside for Service Disable Veteran Owned Small Business [SDVOSB]. The NAICS is 339112 with a business size of 1000 employees. Note, Interested Service Disabled/Veteran Owned Small Business [SDVOSB/VOSB] Offerors must be listed and registered in Vetbiz.gov to be considered for Award.
(v) This combined synopsis solicitation is for a Craniofacial Set for Mid-Face. Responses shall be on an all or none bases, no partial submission. The Government reserves the right to make no award at all.
ITEM INFORMATION
| ITEM NUMBER |
| DESCRIPTION OF SUPPLIES/SERVICES |
UNIT
| 0001 |
| CRANIOFACIAL SET FOR MID-FACE |
See Attachment 1, Item List
| 2 |
| SETS |
Description
1. Background: Orlando Veterans Affairs Health Care System (OVAHCS) has a requirement for Two (2) Complete Craniofacial Set for Mid-Face Sets.
2. Performance Period: One Time.
Government Needs
Craniofacial Set for Mid-Face Set Includes:
(See Attach 1, Item List)
(vi) A description of the items to be acquired, and/or applicable Government need(s) as follows:
(vii) The equipment is to be delivered on or before 30 Days after Receipt of Order (ARO) at the expense of the offeror, FOB destination to Orlando Veterans Affairs Health Care System 13800 Veterans Way, Orlando, FL 32827.
(viii) Provision 52.212-1, Instructions to Offerors – Commercial (Jan 2017), applies to this acquisition.
Addendum to FAR 52.212-1 Instructions to Offerors – Commercial Items: Offerors are to e-mail complete quotes to PatriciaE.Brown@va.gov no later than Time 10:00AM Eastern Standard Time on March 22, 2018 to be considered responsive. All provisions and clauses applicable to this solicitation can be viewed in full text using the following web addresses: http://www.acquisition.gov/far/index.html Note, unless exempt per Federal Acquisition Regulation [FAR] Part 4.11, all contractors must be registered and have an active registration in the System for Award Management (SAM) to be considered for an award against this solicitation. SAM combines data that was formerly contained in the Central Contractors Registration (CCR) and Online Representation and Certifications (ORCA) systems. For information please review the SAM website at https://www.sam.gov. A Data Universal Numbering System (DUNS) number is utilized for registration. To register go to https://www.acquisition.gov.
(ix) Provision 52.212-2, Evaluation – Commercial Items (OCT 2014), applies to this acquisition. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price considered. The following factors shall be used to evaluate offers:
· The following factors shall be used to evaluate offers: Price and technical acceptability.
· A Comparative Evaluation will be conducted in accordance with FAR Part 13.106-2(b)(3) to determine the best value.
(x) 52.212-3 Offeror Representations and Certifications – Commercial items (NOV 2017) applies to this acquisition. Offerors shall include a completed copy of the provision at 52.212-3 Offeror Representation and Certification – Commercial Items (NOV 2017) with their offer. Provision at 52.212-3 Offeror Representation and Certification can be accessed electronically at the following web address: http://www.acquisition.gov/far/index.html
(xi) Clause 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition.
(xii) Clause 52.212-5 Contract Terms and Conditions Required to Implement Statues or Executive Orders—Commercial Items (JAN 2018) applies to this acquisition.
(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).
(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).
(3) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).
(4) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).
(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
[X] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).
[] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (OCT 2015) (41 U.S.C. 3509).
[] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)
[X] (4) 52.204–10, Reporting Executive Compensation and First-Tier Subcontract Awards (OCT 2016) (Pub. L. 109–282) (31 U.S.C. 6101 note).
[] (5) [Reserved] [] (6) 52.204–14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111–117, section 743 of Div. C).
[] (7) 52.204–15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111–117, section 743 of Div. C).
[X] (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (OCT 2015) (31 U.S.C. 6101 note).
[] (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).
[] (10) [Reserved] [] (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).
[] (ii) Alternate I (NOV 2011) of 52.219-3.
[] (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).
[] (ii) Alternate I (JAN 2011) of 52.219-4.
[] (13) [Reserved] [] (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).
[] (ii) Alternate I (NOV 2011).
[] (iii) Alternate II (NOV 2011).
[] (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).
[] (ii) Alternate I (Oct 1995) of 52.219-7.
[] (iii) Alternate II (Mar 2004) of 52.219-7.
[X] (16) 52.219-8, Utilization of Small Business Concerns (NOV 2016) (15 U.S.C. 637(d)(2) and (3)).
[] (17)(i) 52.219-9, Small Business Subcontracting Plan (JAN 2017) (15 U.S.C. 637(d)(4)).
[] (ii) Alternate I (NOV 2016) of 52.219-9.
[] (iii) Alternate II (NOV 2016) of 52.219-9.
[] (iv) Alternate III (NOV 2016) of 52.219-9.
[] (v) Alternate IV (NOV 2016) of 52.219-9.
[] (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).
[] (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).
[] (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).
[X] (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f).
[X] (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C 632(a)(2)).
[] (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (DEC 2015) (15 U.S.C. 637(m)).
[] (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (DEC 2015) (15 U.S.C. 637(m)).
[X] (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).
[X] (26) 52.222–19, Child Labor—Cooperation with Authorities and Remedies (JAN 2018) (E.O. 13126).
[X] (27) 52.222-21, Prohibition of Segregated Facilities (APR 2015).
[X] (28) 52.222–26, Equal Opportunity (SEP 2016) (E.O. 11246).
[X] (29) 52.222-35, Equal Opportunity for Veterans (OCT 2015) (38 U.S.C. 4212).
[X] (30) 52.222-36, Equal Opportunity for Workers with Disabilities (JUL 2014) (29 U.S.C. 793).
[X] (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).
[X] (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).
[X] (33)(i) 52.222-50, Combating Trafficking in Persons (MAR 2015) (22 U.S.C. chapter 78 and E.O. 13627).
[] (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).
[] (34) 52.222-54, Employment Eligibility Verification (OCT 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)
[] (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C.6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)
[] (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)
[] (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUN 2016) (E.O. 13693).
[] (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).
[] (38)(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).
[] (ii) Alternate I (OCT 2015) of 52.223-13.
[] (39)(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).
[] (ii) Alternate I (JUN 2014) of 52.223-14.
[] (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007)(42 U.S.C. 8259b).
[] (41)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).
[] (ii) Alternate I (JUN 2014) of 52.223-16.
[X] (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) [] (43) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).
[] (44) 52.223-21, Foams (JUN 2016) (E.O. 13693).
[] (45) (i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).
[] (ii) Alternate I (JAN 2017) of 52.224-3.
[X] (46) 52.225-1, Buy American—Supplies (MAY 2014) (41 U.S.C. chapter 83).
[] (47)(i) 52.225-3, Buy American—Free Trade Agreements—Israeli Trade Act (MAY 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.
[] (ii) Alternate I (MAY 2014) of 52.225-3.
[] (iii) Alternate II (MAY 2014) of 52.225-3.
[] (iv) Alternate III (MAY 2014) of 52.225-3.
[] (48) 52.225–5, Trade Agreements (OCT 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).
[X] (49) 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).
[] (50) 52.225–26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).
[] (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).
[] (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).
[] (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).
[] (54) 52.232-30, Installment Payments for Commercial Items (JAN 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).
[X] (55) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (Jul 2013) (31 U.S.C. 3332).
[] (56) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).
[] (57) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).
[] (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).
[] (59) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)).
[] (60)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).
[] (ii) Alternate I (Apr 2003) of 52.247-64.
(c)The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
[] (1) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495).
[] (2) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67).
[] (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).
[] (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards—Price Adjustment (Multiple Year and Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).
[] (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards—Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).
[] (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment—Requirements (MAY 2014) (41 U.S.C. chapter 67).
[] (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services—Requirements (MAY 2014) (41 U.S.C. chapter 67).
[] (8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015).
[] (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).
[] (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).
[] (11) 52.237-11, Accepting and Dispensing of $1 Coin (SEP 2008) (31 U.S.C. 5112(p)(1)).
(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records—Negotiation.
(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.
(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.
(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.
(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—
(i) 52.203-13, Contractor Code of Business Ethics and Conduct (OCT 2015) (41 U.S.C. 3509).
(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).
(iii) 52.219-8, Utilization of Small Business Concerns (NOV 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities.
(iv) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.
(v) 52.222-21, Prohibition of Segregated Facilities (APR 2015).
(vi) 52.222–26, Equal Opportunity (SEP 2016) (E.O. 11246).
(vii) 52.222-35, Equal Opportunity for Veterans (OCT 2015) (38 U.S.C. 4212).
(viii) 52.222-36, Equal Opportunity for Workers with Disabilities (JUL 2014) (29 U.S.C. 793).
(ix) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).
(x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.
(xi) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67).
(xii)(A) 52.222-50, Combating Trafficking in Persons (MAR 2015) (22 U.S.C. chapter 78 and E.O. 13627).
(B) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).
(xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment—Requirements (MAY 2014) (41 U.S.C. chapter 67).
(xiv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services—Requirements (MAY 2014) (41 U.S.C. chapter 67).
(xv) 52.222-54, Employment Eligibility Verification (OCT 2015) (E. O. 12989).
(xvi) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015).
(xvii) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).
(xviii)(A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).
(B) Alternate I (JAN 2017) of 52.224-3.
(xix) 52.225–26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).
(xx) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.
(xxi) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.
(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.
(End of Clause)
(xiii) Statement regarding any Additional Provisions and Clauses, or other terms and conditions important to the requirement/procurement process consistent with commercial practices:
52.211-6 BRAND NAME OR EQUAL (AUG 1999)
(a) If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation.
(b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must—
(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;
(2) Clearly identify the item by—
(i) Brand name, if any; and
(ii) Make or model number;
(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and
(4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.
(c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.
(d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation.
52.225-18 Place of Manufacture (MAR 2015).
(a) Definitions. As used in this clause— “Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—
(1) FPSC 5510, Lumber and Related Basic Wood Materials;
(2) Product or Service Group (PSG) 87, Agricultural Supplies;
(3) PSG 88, Live Animals;
(4) PSG 89, Subsistence;
(5) PSC 9410, Crude Grades of Plant Materials;
(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;
(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;
(8) PSC 9610, Ores;
(9) PSC 9620, Minerals, Natural and Synthetic; and
(10) PSC 9630, Additive Metal Materials.
“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.
(b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly—
(1) [] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or
(2) [] Outside the United States.
(End of provision)
52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998).
This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):
http://www.acquisition.gov/far/index.html (End of provision) Provisions incorporated by reference are:
· 52.203-11 Certification and Disclosure regarding payments to Influence certain Federal Transactions (SEP 2007);
· 52.204-7 System for award management (OCT 2016)
· 52.204-17 Ownership or Control of Offeror (JUL 2016)
· 52.212-1 Instructions to Offerors – Commercial Items (JAN 2017);
· 52.225-25 Prohibition on Contracting with entities engaging in certain activities or transactions relating to Iran – Representation and Certification (OCT 2015) Clauses in Full Text:
52.252-2 Clauses Incorporated by Reference (FEB 1998).
This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):
http://www.acquisition.gov/far/index.html (End of clause) Clauses Incorporated by Reference:
· 52.204-13 System for Award Management Maintenance (OCT 2016)
· 52.204-18 Commercial and Government Entity Code Maintenance (JUL 2016)
· 52.222-20 Contracts for materials, supplies, articles, and equipment exceeding $15,000.00 (MAY 2014);
· 52.232-1 Payments (APR 1984);
· 52.232-8 Discounts for prompt payment (FEB 2002);
· 52.243-1 Changes –Fixed Price (AUG 1987);
(xiv) DPAS is N/A
(xv) The RFQ is due on 10:00 AM Eastern Standard Time on March 22, 2018 by e-mail at PatriciaE.Brown@va.gov. Offers received after the exact time specified in the solicitation are considered late and may be considered if the action would not unduly delay the acquisition or are deemed to be in the best interest of the Government.
Questions will only be accepted until Wednesday, March 20, 2018 by 10:00 AM Eastern Standard Time and offers received after the exact time specified in the solicitation are considered late.
(xvi) For further information contact Patricia Brown by phone at 407-646-4011.
Point of Contact, Contract Specialist:
PatriciaE.Brown@va.gov
Point of Contact if Contract Specialist not available, Contracting Officer (CO): Charlotte.Nelson@va.gov
ATTACH 1 (Item List) Craniofacial Set for Mid-Face (Requirement is for 2 Sets)
| Item |
| Product Number |
| Product Description |
| UM |
| Qty |
| Unit Price |
| Extension |
| 1 |
| 01-08105 |
| FORCEP/SELF RETAINING PLATE |
| EA |
| 1 |
| 2 |
| 01-15165 |
| SCISSR/TES/BONE CUTTING,19CM |
| EA |
| 1 |
| 3 |
| 29-13022 |
| CONTNR/UNIVERSAL ACCESSORY |
| EA |
| 2 |
| 4 |
| 29-17004 |
| INLAY/MIDFACE MOD STD HALF SZ |
| EA |
| 1 |
| 5 |
| 29-17005 |
| INLAY/MIDFACE MOD MESH HALF SZ |
| EA |
| 1 |
| 6 |
| 29-17102 |
| MODULE/1.7 MIDFACE FIXATION |
| EA |
| 1 |
| 7 |
| 29-20200 |
| MODULE/MINIPLATE MOD 2.0 |
| EA |
| 1 |
| 8 |
| 29-20201 |
| INLAY/MINIPLATE 2.0 MOD |
| EA |
| 1 |
| 9 |
| 50-12003 |
| ST SCR/1.2X3MM |
| EA |
| 4 |
| 10 |
| 50-12004 |
| ST SCR/1.2X4MM |
| EA |
| 5 |
| 11 |
| 50-12005 |
| ST SCR/1.2X5MM |
| EA |
| 4 |
| 12 |
| 50-12006 |
| ST SCR/1.2X6MM |
| EA |
| 3 |
| 13 |
| 50-12008 |
| ST SCR/1.2X8MM |
| EA |
| 1 |
| 14 |
| 50-12010 |
| ST SCR/1.2X10MM |
| EA |
| 1 |
| 15 |
| 50-12012 |
| ST SCR/1.2X12MM |
| EA |
| 1 |
| 16 |
| 50-12903 |
| SD SCR/1.2X3MM |
| EA |
| 5 |
| 17 |
| 50-12904 |
| SD SCR/1.2X4MM |
| EA |
| 5 |
| 18 |
| 50-14003 |
| ST SCR/ 1.4X3MM C-P EMERGNY |
| EA |
| 1 |
| 19 |
| 50-14005 |
| ST SCR/ 1.4X5MM ER C-P |
| EA |
| 1 |
| 20 |
| 50-17003 |
| ST SCR/1.7X3MM CRSS PIN |
| EA |
| 3 |
| 21 |
| 50-17004 |
| ST SCR/1.7X4MM CRSS PIN |
| EA |
| 5 |
| 22 |
| 50-17005 |
| ST SCR/1.7X5MM CRSS PIN |
| EA |
| 5 |
| 23 |
| 50-17006 |
| ST SCR/1.7X6MM CRSS PI |
| EA |
| 3 |
| 24 |
| 50-17008 |
| ST SCR/1.7X8MM CRSS PIN |
| EA |
| 2 |
| 25 |
| 50-17010 |
| ST SCR/1.7X10MM CRSS PIN |
| EA |
| 1 |
| 26 |
| 50-17012 |
| ST SCR/1.7X12MM CRSS PIN |
| EA |
| 1 |
| 27 |
| 50-17504 |
| SCR/1.7X4MM LOCKNG CRSS PIN |
| EA |
| 3 |
| 28 |
| 50-17505 |
| SCR/1.7X5MM LCKNG CRSS PIN |
| EA |
| 15 |
| 29 |
| 50-17506 |
| SCR/1.7X6MM LCKNG CRSS PIN |
| EA |
| 3 |
| 30 |
| 50-17903 |
| SD SCR/1.7X3MM CRS PIN |
| EA |
| 3 |
| 31 |
| 50-17904 |
| SD SCR/1.7X4MM CRS PIN |
| EA |
| 3 |
| 32 |
| 50-17905 |
| SD SCR/1.7X5MM CRS PIN |
| EA |
| 4 |
| 33 |
| 50-19003 |
| ST SCR/1.9X3MM CRS PIN |
| EA |
| 1 |
| 34 |
| 50-19005 |
| ST SCR/1.9X5MM CRS PIN |
| EA |
| 1 |
| 35 |
| 54-00262 |
| MICRO/MESH, 60 X 60 X .1MM |
| EA |
| 1 |
| 36 |
| 54-00270 |
| MICRO/MESH, 120 X 120 X .2MM |
| EA |
| 1 |
| 37 |
| 54-00344 |
| MESH/1.7MM, DYNAMIC 40X40X.3MM |
| EA |
| 1 |
| 38 |
| 54-00346 |
| MESH/1.7MM, DYNAMIC 90X90X.3MM |
| EA |
| 1 |
| 39 |
| 54-00646 |
| MESH/1.7MM DYNAMIC 90X90X.6MM |
| EA |
| 1 |
| 40 |
| 54-03001 |
| PLT/1.2MM ORBITAL FLOOR |
| EA |
| 1 |
| 41 |
| 54-03002 |
| PLT/1.2MM ORBITAL |
| EA |
| 2 |
| 42 |
| 54-03003 |
| PLT/1.2MM ORBITAL FLOOR |
| EA |
| 2 |
| 43 |
| 54-04002 |
| PLT/1.2MM ORBITAL FLOOR |
| EA |
| 1 |
| 44 |
| 55-04218 |
| PLT/18 HOLE STRT UP MALLEABLE |
| EA |
| 3 |
| 45 |
| 55-04231 |
| 3D PLATE/2X2 HL UPFACE MALLBL |
| EA |
| 4 |
| 46 |
| 55-04233 |
| 3D PLATE/6X2 HL UPPER FC MALBL |
| EA |
| 2 |
| 47 |
| 55-04235 |
| 3D PLATE/6X6 HL UPPER FC MALBL |
| EA |
| 1 |
| 48 |
| 55-04237 |
| 3D PLATE/10X10HL UPPR FC MALBL |
| EA |
| 2 |
| 49 |
| 55-04240 |
| PLT/7 HOLE DOUBLE Y UPFC MLBL |
| EA |
| 3 |
| 50 |
| 55-04250 |
| PLT/10 HOLE CURV UP MALL CNDSD |
| EA |
| 2 |
| 51 |
| 55-04424 |
| PLT/24 HOLE STRT UP MALL CNDSD |
| EA |
| 3 |
| 52 |
| 55-04720 |
| PLT/20 HL STRT MDFC MALLEABLE |
| EA |
| 2 |
| 53 |
| 55-04724 |
| PLT/24 HL STRT MDFC MLBL CNDS |
| EA |
| 2 |
| 54 |
| 55-05151 |
| PLT/5 HOLE Y W/4MM BAR MDFC |
| EA |
| 2 |
| 55 |
| 55-05164 |
| PLT/7 HOLE DOUBLE Y MDFC |
| EA |
| 2 |
| 56 |
| 55-05188 |
| PLT/HOLE ORBITAL RIM MIDFACE |
| EA |
| 2 |
| 57 |
| 55-05716 |
| PLT/16 HOLE STRT MDFACE, LOCK |
| EA |
| 1 |
| 58 |
| 55-05731 |
| 3D PLATE/2X2 HL MDFACE, LOCK |
| EA |
| 1 |
| 59 |
| 55-05733 |
| 3D PLATE/2X6 HL MDFACE, LOCK |
| EA |
| 1 |
| 60 |
| 55-05742 |
| PLT/7 HOLE DOUB Y MDFC LOCK |
| EA |
| 1 |
| 61 |
| 55-05751 |
| PLT/5HOLE Y W/4MM BAR MDFC LOC |
| EA |
| 1 |
| 62 |
| 55-05752 |
| PLT/5HOLE Y W/8MM BAR MDFC LOC |
| EA |
| 1 |
| 63 |
| 55-05758 |
| PLT/8 HOLE CURV MDFACE, LOCK |
| EA |
| 1 |
| 64 |
| 55-05761 |
| PLT/5 HOLE L 2MM ADV MDFC LOC |
| EA |
| 1 |
| 65 |
| 55-05763 |
| PLT/5 HOLE L 5MM ADV MDFC LOC |
| EA |
| 1 |
| 66 |
| 55-05765 |
| PLT/6 HOLE L 8MM ADV MDFC LOC |
| EA |
| 1 |
| 67 |
| 55-05767 |
| PLT/6 HOLE L 12MM ADV MDFC LOC |
| EA |
| 1 |
| 68 |
| 55-05779 |
| PLT/8 HOLE Y MIDFACE LOCKNG |
| EA |
| 1 |
| 69 |
| 55-06224 |
| PLT/24 HOLE STRT UPPERFACE |
| EA |
| 3 |
| 70 |
| 55-06231 |
| 3D PLATE/2X2 HL UPPERFACE |
| EA |
| 3 |
| 71 |
| 55-06233 |
| 3D PLATE/6X2 HL UPPERFACE |
| EA |
| 2 |
| 72 |
| 55-06235 |
| 3D PLATE/6X6 HL UPPERFACE |
| EA |
| 2 |
| 73 |
| 55-06237 |
| 3D PLATE/10X10 HL UPPERFACE |
| EA |
| 1 |
| 74 |
| 55-06240 |
| PLT/7 HOLE DOUBLE Y UPPERFACE |
| EA |
| 3 |
| 75 |
| 55-06250 |
| PLT/10 HOLE CURVED UPPERFACE |
| EA |
| 4 |
| 76 |
| 55-06260 |
| PLT/8 HOLE L 90D LFT UPPERFC |
| EA |
| 3 |
| 77 |
| 55-06261 |
| PLT/8 HOLE L 90D RGHT UPPRFC |
| EA |
| 3 |
| 78 |
| 55-06270 |
| PLT/7 HOLE T UPPERFACE |
| EA |
| 2 |
| 79 |
| 55-06704 |
| 4 55-06704 PLT/4 HOLE STRT W/BAR MDFC |
| EA |
| 4 |
| 80 |
| 55-06708 |
| PLT/8 HOLE MIDFACE |
| EA |
| 2 |
| 81 |
| 55-06724 |
| PLT/24 HOLE STRAIGHT MIDFACE |
| EA |
| 2 |
| 82 |
| 55-06731 |
| 3D PLATE/2X2 HL MIDFACE |
| EA |
| 2 |
| 83 |
| 55-06733 |
| 3D PLATE/2X6 HL MIDFACE |
| EA |
| 2 |
| 84 |
| 55-06750 |
| PLT/10 HOLE CURVED MIDFACE |
| EA |
| 2 |
| 85 |
| 55-06754 |
| PLT/4 HOLE CRVD W/BAR MDFC |
| EA |
| 2 |
| 86 |
| 55-06771 |
| PLT/5 HOLE T MIDFACE |
| EA |
| 2 |
| 87 |
| 55-07760 |
| PLT/5 HOLE L 2MM ADVMT 100D LT |
| EA |
| 2 |
| 88 |
| 55-07761 |
| PLT/5 HOLE L 2MM ADVMT 100D RT |
| EA |
| 2 |
| 89 |
| 55-07762 |
| PLT/5 HOLE L 5MM ADVMT 100D LT |
| EA |
| 2 |
| 90 |
| 55-07763 |
| PLT/5 HOLE L 5MM ADVMT 100D RT |
| EA |
| 2 |
| 01 |
| 55-07764 |
| PLT/6 HOLE L 8MM ADVMT 100D LT |
| EA |
| 2 |
| 92 |
| 55-07765 |
| PLT/6 HOLE L 8MM ADVMT 100D RT |
| EA |
| 2 |
| 93 |
| 55-07766 |
| PLT/6 HOLE L 12MMADVMT 100D LT |
| EA |
| 2 |
| 94 |
| 55-07767 |
| PLT/6 HOLE L 12MMADVMT 100D RT |
| EA |
| 2 |
| 95 |
| 60-09504 |
| TW DRL/.9X46MM DRL,4 MMSTOP,END |
| EA |
| 2 |
| 96 |
| 60-10506 |
| TW DRL/1X50MM DRL,6 MMSTOP, END |
| EA |
| 2 |
| 97 |
| 60-10512 |
| TW DRL/1X54MMDRL12MM STOP,END |
| EA |
| 2 |
| 98 |
| 60-13505 |
| TW DRL/5MM S 1.35X50MM |
| EA |
| 2 |
| 99 |
| 60-13512 |
| TW DRL/1.4X54MM/12MMSTOP EN |
| EA |
| 2 |
| 100 |
| 60-13570 |
| TW DRL/1.3X79MM/12MM/ST/EN |
| EA |
| 2 |
| 101 |
| 60-14008 |
| TW DRL/F. 8MM SCREWS, 1.4X54MM |
| EA |
| 2 |
| 102 |
| 60-20012 |
| TW DRL/2X62MM WL 13MM REP PIN |
| EA |
| 2 |
| 103 |
| 62-12170 |
| SCRDRVR BLADE/UPPERFC/MIDFC |
| EA |
| 4 |
| 104 |
| 62-12173 |
| BENDER/UPPERFC/MIDFACE 3 |
| EA |
| 1 |
| 105 |
| 62-12175 |
| PLATE BENDER/UPERFC/MIDFACE RT |
| EA |
| 1 |
| 106 |
| 62-12176 |
| PLATE BENDER/UPERFC/MIDFACE LF |
| EA |
| 1 |
| 107 |
| 62-15001 |
| HANDLE/UNIV NEURO SCEWDR |
| EA |
| 4 |
| 108 |
| 62-17517 |
| DRL GD/INSRT 1.7MM LCK W |
| EA |
| 1 |
| 109 |
| 62-18330 |
| CUTTER/UPPR/MID FC IN-SITU PLT |
| EA |
| 1 |
| 110 |
| 62-20000 |
| HANDLE/UNIVERSAL DRILL GUIDE |
| EA |
| 1 |
| 111 |
| 62-32440 |
| BONE REPOSITIONING PIN/3.2MM |
| EA |
| 1 |
| 112 |
| 29-13009 |
| HALF SIZE CONTAINER, 4 TIER |
| EA |
| 1 |
| 113 |
| 64-00132 |
| PLIERS/MESH BENDING |
| EA |
| 1 |
| 114 |
| 29-13016 |
| LID HALF SIZE LID HALF SIZE |
| EA |
| 1 |
"PLEASE SHIP THE ORDER AS COMPLETE AND ASSEMBLED. DO NOT SHIP PARTIALS AS IT DELAYS RECEIVING AND SCHEDULING SURGERIES." EACH SET CONTAINS 114 ITEMS.
File details come from the government source that posted it.