36C24727Q0096.docx

DOCX document 227 KB Posted

Attached to
Update Dublin VA Life Safety Drawings
Solicitation number
36C24727Q0096_1
Issued by

About this file

This is a Solicitation/Contract/Order for Commercial Products and Commercial Services (Standard Form 1449) issued by the Department of Veterans Affairs for fire protection engineering and life safety drawing services.

The Department of Veterans Affairs Tuscaloosa VA Medical Center is requesting professional architectural, fire protection engineering, life safety, and code consulting services to update existing life safety drawings (Statement of Conditions Drawings) for the Carl Vinson VA Medical Center located at 1826 Veterans Blvd., Dublin, Georgia 31021. The scope encompasses surveying and developing comprehensive life safety plans for 29 main facility buildings and 7 free-standing buildings totaling approximately 905,593 square feet. Deliverables include detailed life safety plans in AutoCAD format, a survey report with findings and resolutions, an Excel spreadsheet of findings, and compliance with The Joint Commission and VA requirements. The responsible Fire Protection Engineer must hold an ABET-accredited bachelor's degree in fire protection engineering, possess a current PE license in fire protection engineering, and demonstrate five years of experience developing life safety drawings for complex healthcare occupancies, applying NFPA codes and standards, designing/reviewing automatic sprinkler and fire alarm systems, and accepting testing fire protection systems. The contract is a total Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, requiring all vendors to be registered in SAM.gov. The solicitation number is 36C24727Q0096 with an offer due date of November 24, 2026 at 1:00 p.m. CST. The contract award/effective date is November 17, 2026, with a performance period of 150 days from December 31, 2026 to May 30, 2027. Draft deliverables must be submitted within 150 days of task award, with final deliverables due within 30 days of receiving VA comments. Payment will be made electronically in accordance with VAAR Clause 852.232-72, with invoices submitted 30 days in arrears. The contract includes standard FAR clauses addressing payment, inspection/acceptance, disputes, termination, and compliance with federal regulations, as well as VA-specific clauses regarding personnel security vetting, credentialing, and SDVOSB limitations on subcontracting (50% for services).

View the file

Other files

File Type Posted
36C24727Q0096_1.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

36C24727Q0096

PAGE 1 OF

1. REQUISITION NO.

2. CONTRACT NO.

3. AWARD/EFFECTIVE DATE

4. ORDER NO.

5. SOLICITATION NUMBER

6. SOLICITATION ISSUE DATE

a. NAME

b. TELEPHONE NO. (No Collect Calls)

8. OFFER DUE DATE/LOCAL

TIME

9. ISSUED BY

CODE

10. THIS ACQUISITION IS

UNRESTRICTED OR

SET ASIDE:

% FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

8(A)

NAICS:

SIZE STANDARD:

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ

IFB

RFP

15. DELIVER TO

CODE

16. ADMINISTERED BY

CODE

17a. CONTRACTOR/OFFEROR

CODE

FACILITY CODE

18a. PAYMENT WILL BE MADE BY

CODE

TELEPHONE NO.

UEI:

EFT:

PHONE:

FAX:

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER 18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW IS CHECKED

SEE ADDENDUM

19.

20.

21.

22.

23.

24.

ITEM NO.

SCHEDULE OF SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA

26. TOTAL AWARD AMOUNT (For Govt. Use Only) 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

ARE

ARE NOT ATTACHED.

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

ARE

ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN _______________

29. AWARD OF CONTRACT: REF. ___________________________________ OFFER

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DATED ________________________________. YOUR OFFER ON SOLICITATION

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

SET FORTH HEREIN IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER) 30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (TYPE OR PRINT) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

(REV. NOV 2021)

PREVIOUS EDITION IS NOT USABLE

Prescribed by GSA - FAR (48 CFR) 53.212

7. FOR SOLICITATION

INFORMATION CALL:

STANDARD FORM 1449

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

557-21-1-5151-0023

11-17-2026

11-24-2026 13:00

CST

Department of Veterans Affairs Tuscaloosa VA Medical Center 3701 Loop Road East Tuscaloosa AL 35404-5088

X

541310 $12.5 Million

NA

N/A

Dublin VA Medical Center Attn: FACILITY (138) 1826 Veterans Blvd Dublin GA 31021

Tuscaloosa VA Medical Center 3701 Loop Road East Tuscaloosa AL 35404-5088

FMS-VA-2(101)

Financial Services Center PO Box 149971 Austin TX 78714-9971

See CONTINUATION Page The Contractor shall provide all professional architectural, fire protection engineering, life safety, and code consult-ing services required to update the facility’s existing life safety drawings, otherwise known as “Statement of Conditions Drawings” (SOC Drawings) for the Carl Vinson VA Medical Center located at 1826 Veterans Blvd. Dublin, GA 31021.

THIS IS A TOTAL SERVICE-DISABLED, VETERAN-OWNED, SMALL

BUSINESS SET ASIDE. ALL VENDORS MUST BE REGISTERED IN

SAM.GOV TO BE CONSIDERED FOR AWARD.

See CONTINUATION Page

Terri Hudson Contracting Officer

Table of Contents

SECTION A1
A.1 SF 1449 SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES1
SECTION B - CONTINUATION OF SF 1449 BLOCKS3
B.1 CONTRACT ADMINISTRATION DATA3
B.2 PRICE/COST SCHEDULE12
ITEM INFORMATION12
SECTION C - CONTRACT CLAUSES13
C.1 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (OCT 2025) (DEVIATION)13
C.2 52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS (DEVIATION APR 2026)18
C.3 52.223-23 SUSTAINABLE PRODUCTS (NOV 2025) (DEVIATION)19
C.4 52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (NOV 2025) (DEVIATION)20
C.5 VAAR 852.204-70 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL (DEVIATION) (MAR 2026)29
C.6 VAAR 852.204-72 PERSONNEL VETTING AND CREDENTIALING (DEVIATION) (MAR 2026)29
C.7 VAAR 852.219-73 VA NOTICE OF TOTAL SET-ASIDE FOR CERTIFIED SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESSES (JAN 2023) (DEVIATION)33
C.8 VAAR 852.219-75 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING—CERTIFICATE OF COMPLIANCE FOR SERVICES AND CONSTRUCTION (JAN 2023) (DEVIATION)36
C.9 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)37
SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR ATTACHMENTS39
SECTION E - SOLICITATION PROVISIONS40
E.1 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (OCT 2025) (DEVIATION)40
E.2 52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (OCT 2025) (DEVIATION)41
E.3 52.240-90 SECURITY PROHIBITIONS AND EXCLUSIONS REPRESENTATIONS AND CERTIFICATIONS (NOV 2025) (DEVIATION)43
E.4 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)47

SECTION B - CONTINUATION OF SF 1449 BLOCKS

B.1 CONTRACT ADMINISTRATION DATA

1. Contract Administration: All contract administration matters will be handled by the following individuals:

a. CONTRACTOR:

b. GOVERNMENT: Contracting Officer 36C247 Terri Hudson Department of Veterans Affairs Tuscaloosa VA Medical Center 3701 Loop Road East Tuscaloosa AL 35404-5088

2. CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with:

[X]
52.232-33, Payment by Electronic Funds Transfer—System For Award Management, or
[]
52.232-36, Payment by Third Party

3. INVOICES: Invoices shall be submitted in arrears:

a. Quarterly[]
b. Semi-Annually[]
c. Other[X] 30 days in arrears

4. GOVERNMENT INVOICE ADDRESS: All Invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment Requests.

ACKNOWLEDGMENT OF AMENDMENTS: The offeror acknowledges receipt of amendments to the Solicitation numbered and dated as follows:

AMENDMENT NO
DATE

Page 1 of Page 1 of

PERFORMANCE WORK STATEMENT (PWS)

FIRE PROTECTION ENGINEERING AND LIFE SAFETY DRAWING SERVICES

I. SCOPE:

The Contractor shall provide all professional architectural, fire protection engineering, life safety, and code consulting services required to update the facility’s existing life safety drawings, otherwise known as “Statement of Conditions Drawings” (SOC Drawings) for the Carl Vinson VA Medical Center located at 1826 Veterans Blvd. Dublin, GA 31021. Based on Contractor field observations of existing conditions, existing drawing review, and discussions with Carl Vinson VA Medical Center (VAMC) Engineering Services, the Contractor shall furnish a complete set of life safety drawings and a report to Engineering Services (ES) describing findings and recommendations. Drawings must comply with The Joint Commission (TJC) and VA requirements. Drawings must be developed, stamped, and signed by a qualified licensed Professional Fire Protection Engineer who meets the qualification requirements outlined herein.

The Contractor shall survey all individual buildings attached to the main hospital facility, as well as select detached outer buildings surrounding the main facility. The scope of this project includes the buildings listed in the table below:

Carl Vinson VA Medical Center Life Safety Drawings Building List

Building Number
Location
Floor
Estimated SF
1
Main Facility
A – 1st Floor
14,460
B – 2nd Floor
10,172
D – Attic
-
2
Main Facility
A – 1st Floor
49,606
B – 2nd Floor
40,277
C – Basement
49,853
D – Attic
-
3
Main Facility
A – 1st Floor
9,115
B – 2nd Floor
9,230
C – Basement
10,558
D – Attic
-
4
Main Facility
A – 1st Floor
10,118
B – 2nd Floor
10,006
C – Basement
10,471
D – Attic
-
5
Main Facility
A – 1st Floor
85,606
B – 2nd Floor
31,571
D – Attic
-
6
Main Facility
A – 1st Floor
11,208
B – 2nd Floor
11,204
D – Attic
-
8
Main Facility
A – 1st Floor
45,756
B – 2nd Floor
11,209
C – Basement
5,445
D – Attic
-
9
Main Facility
A – 1st Floor
10,566
B – 2nd Floor
11,753
D – Attic
-
10
Main Facility
A – 1st Floor
38,070
B – 2nd Floor
11,212
C – Basement
29,249
D – Attic
-
11
Main Facility
A – 1st Floor
11,208
B – 2nd Floor
11,206
C – Basement
11,594
D – Attic
-
12
Main Facility
A – 1st Floor
21,963
B – 2nd Floor
11,208
C – Basement
17,923
D – Attic
-
13
Main Facility
A – 1st Floor
11,714
B – 2nd Floor
11,348
D – Attic
-
14
Main Facility
A – 1st Floor
11,592
B – 2nd Floor
11,595
C – Basement
11,507
D – Attic
-
15
Main Facility
A – 1st Floor
11,189
B – 2nd Floor
11,213
D – Attic
-
16
Main Facility
A – 1st Floor
11,213
B – 2nd Floor
11,470
C – Basement
11,954
D – Attic
-
17
Main Facility
A – 1st Floor
11,300
B – 2nd Floor
11,502
D – Attic
-
19
Main Facility
A – 1st Floor
12,462
B – 2nd Floor
11,189
D – Attic
-
25
Free-Standing Building
A – 1st Floor
6,742
B – 2nd Floor
2,326
26
Free-Standing Building
A – 1st Floor
12,411
C – Basement
8,636
27
Free-Standing Building
A – 1st Floor
14,996
28
Free-Standing Building
A – 1st Floor
5,500
C – Basement
3,515
29
Free-Standing Building
A – 1st Floor
6,673
30
Free-Standing Building
A – 1st Floor
893
40
Free-Standing Building
A – 1st Floor
-
85
Free-Standing Building
A – 1st Floor
5,886
86
Free-Standing Building
A – 1st Floor
13,891
87
Free-Standing Building
A – 1st Floor
21,538
89
Free-Standing Building
A – 1st Floor
29,521
B – Mechanical Penthouse
-
Total Square Footage
905,593

II. DESCRIPTION OF TASKS:

Contractor tasks include, but are not limited to, the following:

1. Meet with the station in-person to review and document the status of any known unresolved fire protection or life safety deficiencies.

1. Review any recently renovated areas where new architectural backgrounds may be needed for the survey work.

1. Conduct in-person fire protection and life safety assessments of the facility as needed to develop complete life safety drawings and to address questions, comments, and other related needs identified by the station. In addition to initial site visits prior to draft deliverable submission, it is anticipated that at least one additional site visit will be required between submission of the draft and final deliverables. The Contractor is responsible for all site visits necessary to produce drawings that meet the needs of the VA. The assessments must be based on the edition of NFPA 101 enforced at the time of contract award and will include above-ceiling and below-ceiling surveys as necessary to confirm barrier/separation routing and other relevant life safety features in all portions of the buildings noted above. The assessment will include, but not be limited to:

2. Occupancy Classifications

2. Separated and Non-Separated Mixed Occupancies

2. Construction Type

2. Vertical Openings including Communicating Spaces, Convenience Openings, & Atriums

2. Protection of Hazards

2. Extent of fire sprinkler protection

2. Corridor Protection / Separation

2. Subdivision of Building Spaces and Smoke Barriers

2. Fire Barriers

2. Operating Features pertinent to life safety drawing development

2. Means of Egress

· Components

· Arrangement of Means of Egress

· Suites

· Travel Distance

· Exit Discharge

· Horizontal Exits

· Building Separations

1. Contractor scope does not include:

3. Fire and smoke door surveys

3. Detailed evaluation of sprinkler and fire alarm systems

3. Evaluation of fire extinguisher locations

3. Evaluation of exit sign locations

1. During the survey, verify the accuracy of the background drawings and work with the facility to update the backgrounds where existing building areas are renovated. The Contractor shall make any needed architectural background updates to the life safety drawings, in compliance with VA CAD standards. The contractor shall not rely on any documentation, such as drawings, provided by the VA without performing independent verification of such documentation.

1. Develop a report that details findings and resolutions resulting from the survey for review and comment. Any significant deficiencies will be reported to the facility when found. Code references and specific location references must be provided for all findings.

1. Develop Life Safety Plans in AutoCAD format based on existing AutoCAD drawings, indicating the fire protection and life safety features of the buildings. Drawings must indicate the routing and requirements for all fire and smoke barriers, corridor walls, hazardous areas, chutes, suites, exits, etc. The drawings must also include the following:

6. Notation regarding the extent of fire sprinkler protection, including identification of those areas of the building that do or do not have sprinkler protection

6. Symbols legend showing features of fire safety

6. Identification, separation (if required), and NFPA 101 classification of all vertical openings

6. Fire barriers

· If vertical enclosures are identified with fire barriers, they must also be labeled as to their function (i.e., linen chute/HVAC shaft/elevator, etc.)

6. Smoke barriers, smoke partitions, smoke resistive construction, corridor separation

6. Hazardous Areas, as defined by NFPA 101

6. Exits

6. Suites in health care occupancies, including the type (sleeping, patient care non-sleeping, non-patient care) and suite size (maximum suite size is per current edition of NFPA 101).

6. Equivalencies Previously Approved by Joint Commission or other accrediting body, located on drawings where the covered deficiencies are identified.

· Summary of deficiencies covered by approved equivalency

· Summary of compensating measures for such deficiencies

6. An exit stair summary table, detailing floors served and level of exit discharge

6. A diagram or table that details all smoke/fire zones in the building(s), their use and occupancy, the area of the zone, the extent of sprinkler protection and smoke detection in the zone, and the type/classification of building construction

6. A fire barrier and door requirements summary table that includes requirements for the barriers and openings in the barriers, by type of barrier as shown in the Life Safety Symbols. This table shall include applicable code references and shall be provided on its own drawing sheet.

1. Develop a report that details and describes the building’s fire and life safety features, provides the findings and resolutions, and provides a detailed discussion on any significant fire and life safety issues identified.

1. Submit all documents to the COR electronically. These will include:

8. Survey Report, including Findings and Resolutions.

8. Life Safety Plans, in PDF and AutoCAD format.

8. Excel spreadsheet of all findings.

1. The COR and/or CO may require the Contractor to meet virtually with the CO, contract administrator, and other government personnel as deemed necessary. The Contractor may request a virtual meeting with the COR and/or CO when deemed necessary.

1. The Contractor shall provide, via email, minutes of all government-Contractor meetings. The Contractor shall provide these draft minutes within two business days after completion of the meeting. The government representative will review draft minutes; make edits as appropriate and return to the Contractor. Contractor shall have one business day after receipt to finalize minutes and return to the government.

1. The Contractor shall ensure contract employees maintain open and professional communication with the staff at the VA facilities. Complaints validated by the COR or VA staff will be reported in writing to the CO for action. If the Contractor fails to correct validated complaints raised by the COR and CO to the satisfaction of the COR, it will be considered a failure in performance.

III. SUBMISSION TIMELINE AND ACCEPTANCE OF DELIVERABLES

A draft submission of all deliverables, including drawings, reports, etc. must be submitted to the COR within 150 days of task award. The Contractor must provide final deliverable submission within 30 days of receipt of VA comments on the draft deliverables.

The VA will review all deliverables identified under this contract for functional and aesthetic relationship. VA review of the Contractor’s work shall not be construed by either party to relieve the Contractor from any requirements of this scope of work, such as the requirement for deliverables to comply with applicable codes, standards, and VA requirements.

Reports / documents will be accepted by the VA when all discrepancies, errors or other deficiencies identified in writing by the COR, designee or government representative have been corrected. Electronic copies shall be delivered via email to the VA submitter. If specific VA guidance does not exist, the Contractor shall use best commercial practice for formatting reports and documents. If the government representative finds that the report/document contains spelling errors, grammatical errors, improper format, CAD drafting errors, or otherwise does not conform to the requirements stated in this PWS, the document may be immediately rejected without further review and returned to the Contractor for correction and resubmission.

IV. QUALIFICATIONS - FIRE PROTECTION ENGINEER

The responsible Fire Protection Engineer (FPE) must have the qualifications outlined below.

1. The Fire Protection Engineer (FPE):

a) Must have obtained an ABET-accredited bachelor’s degree in fire protection engineering or a master’s degree or other advanced degree in fire protection engineering (“fire safety” or similar degrees are not acceptable)

b) Must have passed the principles and practices (PE) examination in fire protection engineering

c) Must maintain a current United States-based professional engineering license in fire protection engineering. It is understood that some states do not issue dedicated PE licenses in Fire Protection Engineering; in such cases, an individual’s state licensure must be predicated upon passing the PE examination in fire protection engineering.

2. Five years of experience developing life safety drawings (statement of conditions drawings) for complex health care occupancies (occupancies containing NFPA 101 suites, high-rise buildings, horizontal exits, separated and mixed occupancies, etc.) to be used for accreditation compliance purposes.

3. Five years of experience in application and interpretation of National Fire Protection Association (NFPA) Codes and Standards and the model building codes.

4. Five years of experience in the design/review of automatic sprinkler and fire alarm systems, including all the following:

a. Automatic sprinkler and fire alarm system shop drawings.

b. Automatic sprinkler system hydraulic calculations.

c. Fire alarm system voltage drop and battery calculations.

5. Five years of experience in the application and interpretation of NFPA codes and standards, including, but not limited to, NFPA 1, 3, 4, 10, 13, 14, 17A, 20, 24, 25, 30, 45, 72, 75, 80, 82, 90A, 96, 99, 101, 110, 220, 241 and 2001.

6. Five years of experience in the design of health care facilities on projects of similar relevance and complexity.

7. Five years of experience in acceptance testing fire protection systems.

Substitution of Personnel All FPEs working on this contract must have their resumes reviewed and approved by the COR and the Contracting Officer. New personnel shall not commence work until all necessary security requirements have been fulfilled, and resumes provided and accepted. The COR or designee will evaluate such requests and promptly notify the Contractor of approval or disapproval in writing.

VI. GOVERNMENT AND CONTRACTOR RESPONSIBILITIES

The VA COR or government designee will provide the Contractor with copies of documents that the VA is legally required to provide. The Contractor shall request other VA documentation deemed pertinent to the work directly from the COR, government designee or facility representative. The Contractor is expected to use common knowledge and resourcefulness in securing all other reference materials, standard industry publications, and related materials that are pertinent to the work without violating any applicable copyright laws. The most current versions of such documents will be used for all referenced documents. If a version cited in this PWS is updated during the period of performance of this contract, then the most recent / updated version will be applied.

The Contractor shall maintain communications with the VA COR, government designee or facility representative as needed to complete the scope of this task. The government will be available for communication (calls, email, etc.) as reasonably needed to complete the scope of this task, subject to COR availability.

8. Period of Performance and Work Hours: The Period of Performance will be 150 days from December 31, 2026 to May 30, 2027 and the contractor shall be available during the normal business hours of 8:00 am – 4:30 pm Monday – Friday excluding Federal Holidays. The Contractor is not required to perform services on the following federal holidays set by law (USC Title 5 Section 6103):

Page 1 of Page 1 of New Year's Day Martin Luther King's Birthday Washington's Birthday Memorial Day Juneteenth Independence Day Independence Day Labor Day Columbus Day Veterans Day Thanksgiving Day Christmas Day

B.2 PRICE/COST SCHEDULE

ITEM INFORMATION

ITEM NUMBER
DESCRIPTION OF SUPPLIES/SERVICES
QUANTITY
UNIT
UNIT PRICE
AMOUNT
1.00
JB
__________________
__________________

The Contractor shall provide all professional architectural, fire protection engineering, life safety, and code consulting services required to update the facility's existing life safety drawings, otherwise known as "Statement of Conditions Drawings" (SOC Drawings). Based on Contractor field observations of existing conditions, existing drawing review, and discussions with Carl Vinson VA Medical Center (VAMC) Engineering Services in accordance with the Statement of Work (SOW). The Contractor shall also furnish a complete set of life safety drawings and a report to Engineering Services (ES) describing findings and recommendations. Drawings must comply with Joint Commission and VA requirements.

GRAND TOTAL
__________________

SECTION C - CONTRACT CLAUSES

C.1 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (OCT 2025) (DEVIATION)

(a) Definitions. The clause at Federal Acquisition Regulation (FAR) 52.202-1, Definitions, is incorporated by reference.

(b) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post acceptance rights—

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(c) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(d) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(e) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause FAR 52.233-1, Disputes, which is incorporated in this contract by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence. Examples of occurrences include acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. When an excusable delay occurs, the Contractor shall—

(1) Notify the Contracting Officer in writing as soon as possible;

(2) Remedy the delay as quickly as possible; and

(3) Notify the Contracting Officer when the occurrence is over.

(g) Invoice. The Government will handle invoices according to the Prompt Payment Act (31 U.S.C. 3903) and 5 CFR part 1315. The Contractor shall submit invoices to the address designated in the contract to receive invoices. An invoice must include the information required by 5 CFR part 1315.9(b).

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees, and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark, or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment—

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR part 1315.

(3) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date that appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(4) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall—

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable;

(D) Contractor point of contact; and

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(5) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by FAR part 33 if—

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see FAR part 32).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a termination for cause.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on-

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures for interest credits prescribed in FAR part 32 in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon—

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government's convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. The Government will send a cure notice to the Contractor, unless the reason for the termination is late delivery. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. The Contractor warrants and implies that the items delivered under this contract are merchantable and fit for use for the particular purpose described in this contract.

(p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 49 U.S.C. 40118, Government-financed air transportation; and 41 U.S.C. chapter 21 relating to procurement integrity.

(r) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The schedule of supplies/services.

(2) The Disputes, Payments, Invoice, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause;

(3) Other contract clauses incorporated in the solicitation or contract;

(4) Addenda to this solicitation or contract,

(5) Solicitation provisions incorporated in the solicitation.

(6) Other paragraphs of this clause.

(7) Other documents, exhibits, and attachments; and

(8) The specification.

(s) Unauthorized obligations.

(1) Except as stated in paragraph (s)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern:

(i) Any such clause is unenforceable against the Government.

(ii) Neither the Government nor any Government-authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an “I agree” click box or other comparable mechanism (e.g., “click-wrap” or “browse-wrap” agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.

(2) Paragraph (s)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(t) Comptroller General examination of record. This paragraph applies if this contract was awarded using other than sealed bid procedures and is in excess of the simplified acquisition threshold on the date of award of this contract.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices, at all reasonable times, the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR part 4, longer period required by statute, or periods specified in other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This clause does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(u) Incorporation by reference. The Contractor’s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of Clause) ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES Clauses that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The following clauses are incorporated into 52.212-4 as an addendum to this contract:

C.2 52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS (DEVIATION APR 2026) (a)Definitions. As used in this clause— Program participation means membership or participation in, or access or admission to: training, mentoring, or leadership development programs; educational opportunities; clubs; associations; or similar opportunities that are sponsored or established by the contractor or subcontractor.

Racially discriminatory diversity, equity, and inclusion (DEI) activities means disparate treatment based on race or ethnicity in the recruitment, employment (e.g., hiring, promotions), contracting (e.g., vendor agreements), program participation, or allocation or deployment of an entity's resources.

(b) In connection with the performance of work under this contract, the Contractor agrees as follows:

(1) The Contractor will not engage in any racially discriminatory DEI activities;

(2) The Contractor will furnish all information and reports, including providing access to books, records, and accounts, as required by the Contracting Officer, for purposes of ascertaining compliance with this clause;

(3) In the event of the Contractor's or a subcontractor's noncompliance with this clause, this contract may be canceled, terminated, or suspended in whole or in part, and the Contractor or subcontractor may be declared ineligible for further Government contracts;

(4) The Contractor will report any subcontractor's known or reasonably knowable conduct that may violate this clause to the Contracting Officer and take any appropriate remedial actions directed by the Contracting Officer; and

(5) The Contractor will inform the Contracting Officer if a subcontractor sues the Contractor and the suit puts at issue, in any way, the validity of this clause.

(6) The Contractor recognizes that compliance with the requirements of this clause are material to the Government's payment decisions for purposes of 31 U.S.C. 3729(b)(4).

(c) The Contractor must include the substance of this clause, including this paragraph (c), in subcontracts at any tier, including those for commercial products and commercial services, except those where the place of delivery or performance is outside the United States.

(End of Clause)

C.3 52.223-23 SUSTAINABLE PRODUCTS (NOV 2025) (DEVIATION)

(a) Definitions. As used in this clause— Sustainable products means—

(1) A product that contains recovered material designated by the EPA under the Comprehensive Procurement Guidelines (42 U.S.C. 6962) (40 CFR part 247) (https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program#products).

(2) An energy-efficient product or low standby power device (42 U.S.C. 8259b) (10 CFR part 436, subpart C) (https://www.energy.gov/femp/search-energy-efficient-products, https://www.energystar.gov/products?s=mega, and https://www.energy.gov/femp/low-standby-power-product-list).

(3) A biobased product that meets the content requirements of the USDA under the BioPreferred® program (7 U.S.C. 8102) (7 CFR Part 4270) (https://www.biopreferred.gov/)

(4) A substance identified in the EPA’s Significant New Alternatives Policy (SNAP) program as a safe alternative to an ozone-depleting substance (42 U.S.C. 7671l) (40 CFR part 82, subpart G) (https://www.epa.gov/snap/unacceptable-and-acceptable-substitutes-tables).

(b) Requirements. The Government has identified in the statement of work or elsewhere in the contract the sustainable products that are required during the performance of this contract. The Contractor shall ensure that it provides sustainable products as required by this contract, when the products are—

(1) Delivered to the Government;

(2)Furnished for use by the Government;

(3) Incorporated into the construction of a public building or public work; or

(c) Furnished for use in performing services under this contract, where the cost of the products is a direct cost to this contract.

(End of Clause)

C.4 52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (NOV 2025) (DEVIATION)

(a) Definitions. As used in this clause— American Security Drone Act-covered foreign entity means an entity included on a list that the Federal Acquisition Security Council (FASC) develops and maintains and publishes in the System for Award Management (SAM) at https://www.sam.gov (section 1822 of Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

Backhaul means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network (e.g., connecting cell phones/towers to the core telephone network). Backhaul can be wireless (e.g., microwave) or wired (e.g., fiber optic, coaxial cable, Ethernet).

Covered application means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or an entity owned by ByteDance Limited.

Covered article, as defined in 41 U.S.C. 4713(k), means:

(1) Information technology, as defined in 40 U.S.C. 11101, including cloud computing services of all types;

(2) Telecommunications equipment or telecommunications service, as those terms are defined in section 3 of the Communications Act of 1934 (47 U.S.C. 153);

(3) The processing of information on a Federal or non-Federal information system, subject to the requirements of the Controlled Unclassified Information program (see 32 CFR part 2002); or

(4) Hardware, systems, devices, software, or services that include embedded or incidental information technology.

Covered foreign country means The People’s Republic of China.

Covered telecommunications equipment or services means—

(1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities);

(2) For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities);

(3) Telecommunications or video surveillance services provided by such entities or using such equipment; or

(4) Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country.

Critical technology means—

(1) Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations;

(2) Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled—

(i) Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, nuclear nonproliferation, or missile technology; or

(ii) For reasons relating to regional stability or surreptitious listening;

(3) Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities);

(4) Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of nuclear equipment and material);

(5) Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title 42 of such Code; or

(6) Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. 4817).

FASC-prohibited unmanned aircraft system means an unmanned aircraft system manufactured or assembled by an American Security Drone Act—covered foreign entity.

FASCSA order means any of the following orders issued under the Federal Acquisition Supply Chain Security Act (FASCSA) requiring removing covered articles from executive agency information systems or excluding one or more named sources or named covered articles from executive agency procurement actions, as described in 41 CFR 201-1.303(d) and (e):

(1) The Secretary of Homeland Security may issue FASCSA orders that apply to civilian agencies, to the extent not covered by paragraph (2) or (3) of this definition. This type of FASCSA order may be referred to as a Department of Homeland Security (DHS) FASCSA order.

(2) The Secretary of Defense may issue FASCSA orders that apply to the Department of Defense (DoD) and national security systems other than sensitive compartmented information systems. This type of FASCSA order may be referred to as a DoD FASCSA order.

(3) The Director of National Intelligence (DNI) may issue FASCSA orders that apply to the intelligence community and sensitive compartmented information systems, to the extent not covered by paragraph (2) of this definition. This type of FASCSA order may be referred to as a DNI FASCSA order.

Information technology, as defined in 40 U.S.C. 11101(6)—

(1) Means any equipment or interconnected system or subsystem of equipment, used in the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information by the executive agency, if the equipment is used by the executive agency directly or is used by a contractor under a contract with the executive agency that requires the use—

(i) Of that equipment; or

(ii) Of that equipment to a significant extent in the performance of a service or the furnishing of a product;

(2) Includes computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary for security and surveillance), peripheral equipment designed to be controlled by the central processing unit of a computer, software, firmware and similar procedures, services (including support services), and related resources; but

(3) Does not include any equipment acquired by a Federal contractor incidental to a Federal contract.

Intelligence community, as defined by 50 U.S.C. 3003(4), means the following—

(1) The Office of the Director of National Intelligence;

(2) The Central Intelligence Agency;

(3) The National Security Agency;

(4) The Defense Intelligence Agency;

(5) The National Geospatial-Intelligence Agency;

(6) The National Reconnaissance Office;

(7) Other offices within the Department of Defense for the collection of specialized national intelligence through reconnaissance programs;

(8) The intelligence elements of the Army, the Navy, the Air Force, the Marine Corps, the Coast Guard, the Federal Bureau of Investigation, the Drug Enforcement Administration, and the Department of Energy;

(9) The Bureau of Intelligence and Research of the Department of State;

(10) The Office of Intelligence and Analysis of the Department of the Treasury;

(11) The Office of Intelligence and Analysis of the Department of Homeland Security; or

(12) Such other elements of any department or agency as may be designated by the President, or designated jointly by the Director of National Intelligence and the head of the department or agency concerned, as an element of the intelligence community.

Interconnection arrangement means arrangements governing the physical connection of two or more networks to allow the use of another’s network to hand off traffic where it is ultimately delivered (e.g., connecting a customer of telephone provider A to a customer of telephone company B) or sharing data and other information resources.

Kaspersky Lab-covered article means any hardware, software, or service that—

(1) Is developed or provided by a Kaspersky Lab-covered entity;

(2) Includes any hardware, software, or service developed or provided in whole or in part by a Kaspersky Lab-covered entity; or

(3) Contains components using any hardware or software developed in whole or in part by a Kaspersky Lab-covered entity.

Kaspersky Lab-covered entity means—

(1) Kaspersky Lab;

(2) Any successor entity to Kaspersky Lab, including any change in name, e.g., “Kaspersky”;

(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or

(4) Any entity of which Kaspersky Lab has a majority ownership.

National security system, as defined in 44 U.S.C. 3552, means any information system (including any telecommunications system) used or operated by an agency or by a contractor of an agency, or other organization on behalf of an agency—

(1) The function, operation, or use of which involves intelligence activities; involves cryptologic activities related to national security; involves command and control of military forces; involves equipment that is an integral…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .