36C24427Q0072 - SOURCES SOUGHT NOTICE - MICRO-SIZED SCISSOR LIFT - 529.pdf
PDF 143 KB Posted
- Attached to
- Micro-Sized Scissor Lift
- Solicitation number
- 36C24427Q0072
About this file
This is a Sources Sought Notice issued by the Department of Veterans Affairs, VISN 4, Network Contracting Office 4, seeking market research information regarding potential suppliers for a micro-sized electrical scissor lift. The solicitation number is 36C24427Q0072, with responses due by November 25, 2026 at 10:00 PM Eastern Time via email to Contracting Officer Andrea Aultman-Smith (andrea.aultmansmith@va.gov). The equipment will be delivered to Butler VA Medical Center, 325 New Castle Road, Butler, PA 16001, Building 47, with delivery hours between 8:00 AM and 3:30 PM Monday through Friday, excluding Federal holidays. The warehouse has a dock, eliminating the need for liftgate delivery.
The requirement specifies a JLG ES2632 Micro-Sized Electrical Scissor Lift or equivalent with detailed salient characteristics including: zero turn radius, non-marking tires for indoor use, removable ladder, electric engine, indoor platform height of 24-25.5 feet, machine length of 5.75-6.50 feet, net load capacity of 500-700 lbs, load sensing with active pothole protection and tilt alarm/light, 30% gradeability, 20-40 second raise/lower time, weight of 4000-5000 lbs, 650W Delta-Q 24V AC CAN-enabled charger, and capacity for two users. Training and installation are not required. Respondents must provide company information, business size status under NAICS code 333924 (900-employee threshold), product details, delivery lead time, manufacturer/distributor status, U.S. manufacturing location, pricing for market research purposes only, and feedback on salient characteristics. This Notice is for information and planning purposes only and does not constitute a binding solicitation or commitment to contract.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sources Sought Notice
*= Required Field Sources Sought Notice
SUBJECT* Micro-Sized Scissor Lift
GENERAL INFORMATION
CONTRACTING OFFICE’S ZIP CODE* 19320
SOLICITATION NUMBER* 36C24427Q0072
RESPONSE DATE/TIME/ZONE 11-25-2026 10:00 AM EASTERN TIME, NEW
YORK, USA
ARCHIVE 15 DAYS AFTER THE RESPONSE DATE
RECOVERY ACT FUNDS N
SET-ASIDE
PRODUCT SERVICE CODE* 3990
NAICS CODE* 333924
CONTRACTING OFFICE ADDRESS Department of Veterans Affairs
Regional Procurement Office East
Network Contracting Office 4
POINT OF CONTACT*
Contracting Officer
Andrea Aultman-Smith
Andrea.Aultman-Smith@va.gov
484-475-5619
PLACE OF PERFORMANCE
ADDRESS Department of Veterans Affairs
Butler VA Medical Center
325 New Castle Road
Building 47
Butler, PA
POSTAL CODE 16001
COUNTRY USA
ADDITIONAL INFORMATION
AGENCY’S URL www.va.gov
URL DESCRIPTION Department of Veterans Affiars
AGENCY CONTACT’S EMAIL ADDRESS Andrea.Aultman-Smith@va.gov
EMAIL DESCRIPTION Contracting Officer
DESCRIPTION
This Sources Sought Notice is intended for information and planning purposes only at this time and shall not be construed as a solicitation or as an obligation on the part of the Department of Veterans Affairs. Because this is a Sources Sought announcement, no evaluation letters and/or results will be issued to the respondents.
No solicitation exists. Therefore, do not request a copy of a solicitation.
The Department of Veterans Affairs VISN 4, Network Contracting Office 4 (NCO 4), is seeking information and potential qualified/verified Businesses capable of meeting requirements and salient characteristics for the equipment listed below.
Statement of Work
Micro-Sized Electrical Scissor Lift
Delivery Location:
Butler VA Medical Center 325 New Castle Road Butler, PA 16001 Building 47
Background: The purpose of this requirement is to obtain a mobile elevated work platform (MEWP) to safely access work areas that are currently unreachable due to ladder-use restrictions both indoors and outdoors. The MEWP will improve maintenance capabilities, enhance worker safety, and increase operational efficiency across both VA Butler campuses, Butler Healthcare Care Center (HCC) and Butler New Castle Road (NCR).
Per the POC, the scissor lift needs to be a brand name that must have the following salient characteristics (tech specs will be uploaded). These are required for workspace size requirements, work type requirements, and work area/driver safety.
(Salient Characteristics): JLG ES2632 Micro-Sized Electrical Scissor Lift or Equivalent
1. Zero turn radius
2. Non-marking tires for indoor use
3. Removable Ladder
4. Electric engine
5. Indoor platform height: Min 24 – Max 25.5 ft
6. Machine length: Min 5.75 ft – Max 6.50 ft
7. Net Load Capacity: Min 500 – Max 700 lbs
8. Load sensing, Active pothole protection, Tilt alarm/light, self‑closing gate, toe boards
9. Gradeability: Min 30% Max 30% incline
10. Raise/lower time: 20 – 40 seconds
11. Weight: Min 4000 – Max 5000 lbs
12. 650W Delta‑Q 24V AC; CAN‑enabled charger
13. Users: 2 people
Training and Installation:
None required
Delivery:
Delivery will be made by going through our warehouse and the hours of delivery are 8am to 3:30pm Monday - Friday, excluding all Federal holidays. Warehouse has a dock so no liftgate is needed for delivery.
Responses to this Sources Sought Notice should include answers to the following questions:
Company name, address, point of contact, phone number, and point of contact e-mail, DUNS Number, Cage Code, size of business pursuant to:
North American Industry Classification code (NAICS): 333924 Industrial Truck, Tractor, Trailer and Stacker Machinery Manufacturing
The Small Business Size Standard for this NAICS code is 900 employees
(1) Provide company name, address, point of contact, phone number, point of contact e-mail, UEI Number, and size of business pursuant to North American Industrial Classification System (NAICS) code above.
(2) Indicate the size status and representations of your business, such as but not limited to Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc.
(3) Provide Brand Name, Model and Part Number, and Brief Description of the product you could provide.
(4) Provide anticipated delivery lead time.
(5) Are you the manufacturer, distributor, or an equivalent solution to the items being referenced above?
If not, provide additional information shown below. This is to confirm compliance with the non-manufacturer rule IAW 13 CFR 121.406(b) Nonmanufacturers.
• Does your company exceed 500 employees
• Primarily engaged in the retail or wholesale trade and normally sells the type of item being supplied;
• Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice;
• Provide the items of a small business
(6) Is the product you are providing information about made by a small business manufacturer or a large business?
(7) Is the product you are providing information about manufactured in the United States? If not, please provide the country where the unit is manufactured.
(8) If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, point of Contact and size status (if available).
(9) If you’re a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter, assemble, and/or modify the items requested in any way? If you do, state how and what is altered, assembled, and/or modified?
(10) If you are an FSS GSA/NAC contract holder or other federal contract holder, are the items/solution you are providing information for available on your schedule/contract? If so, please provide the contract number.
(11) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award.
(12) Please submit your capabilities regarding the salient characteristics detailed above to establish capabilities for planning purposes.
(13) Please review salient characteristics/statement of work (if applicable) and provide feedback or suggestions that would allow for maximum competition. If none, please reply as N/A.
This Sources Sought Notice will be conducted in accordance with Federal Acquisition Regulation (FAR) Part 10 – Market Research. Telephone responses will not be accepted. Responses must be received in writing via e-mail to the Contracting Point of Contact listed below by the date listed below.
This notice will help the VA in determining available potential sources only. Do not contact VA Medical Center staff regarding this requirement, as they are not authorized to discuss this matter related to this procurement action. All questions will be addressed by the Contract Officer.
Responses must be received via email to Contracting Officer
Contracting Point of Contact: Andrea Aultman-Smith, andrea.aultman-smith@va.gov
Responses Due: Wednesday, November 25, 2026 at 10:00 PM Eastern Time
All firms responding to this Request for Information are advised that their response is not a request for proposal, therefore will not be considered for a contract award.
If a solicitation is issued, information will be posted on the Contracting Opportunities or via GSA eBuy web site for all qualified interested parties at a later date and interested parties must respond to the solicitation to be considered for award. This notice does not commit the government to contract for any supplies or services.
The government will not pay for any information or administrative cost incurred in response to this Request for Information. Information will only be accepted in writing by e-mail to Contracting Officer Andrea Aultman-Smith, Contract Officer at andrea.aultman-smith@va.gov mailto:andrea.aultman-smith@va.gov
This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. All firms responding to this Sources Sought Notice are advised that this is not a request for quote and that any quote submitted in response to this notice will not be considered for award. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract.
DISCLAIMER
This notice does not commit the Government to contract for any supplies or services.
The Government will not pay for any information or administrative cost incurred in response to this Source Sought Notice.
This Sources Sought Notice is issued solely for information and planning purposes only and does not constitute a solicitation. If a solicitation is issued, it will be posted at a later date for all qualified interested parties and interested parties must respond to the solicitation to be considered for award.
Respondents are solely responsible for properly marking and clearly identifying any proprietary information or trade secrets contained within their response. The Government will not be liable for or suffer any consequential damages for any proprietary information that has not been both properly marked and clearly identified.
Information marked proprietary received in response to this RFI will be safeguarded and handled in accordance with applicable Government regulations. To aid the Government in its review, please segregate proprietary information.
End of Document
File details come from the government source that posted it. Updated .