36C24426Q0296.docx

SUBJECT*

ENT Surgical Instrumentation

GENERAL INFORMATION

SET-ASIDE

Network Contracting Office 4

1010 Delafield Road Pittsburgh, PA 15215

POINT OF CONTACT*

Contract Specialist Jeff Mann jefferson.mann@va.gov 717-202-5456

PLACE OF PERFORMANCE

Lebanon VA Medical Center

1700 S Lincoln Ave

Lebanon PA

ADDITIONAL INFORMATION

EMAIL DESCRIPTION

DESCRIPTION

In accordance with FAR 10, Market Research, responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to the Sources Sought Notice. The purpose of this announcement is to gain market research knowledge of potential qualified sources and their size classification.

The Department of Veterans Affairs Lebanon VA Medical Center, 1700 S Lincoln Ave, Lebanon, PA 17042, is seeking potential sources capable of providing new ENT surgical instrument sets with the Draft Statement of Need (SON) below.

The Government’s purpose of this Sources Sought is to determine if there are alternative manufacturers capable of providing all the needed instruments listed. Instruments requiring light and/or power must be compatible with Olympus towers currently in use at facility.

An excel spreadsheet is attached to assist in responding to this notice. Use is not mandatory and only meant to encourage vendors to supply part numbers.

Please include the following information in your response:

1. Company name

2. Address

3. Contact person name, phone number, and email address

4. UEI #

5. Business size/classification/type (i.e. 8a, Hubzone, SDVOSB, VOSB, etc.)

6. FSS/eCAT/SAC/NAC/NASA SEWP or any other Government held contract, if applicable provide the number.

7. NAICS: 339112

8. Size Standard: 1000 Employees

Please answer the following questions:

1. Provide the brand name, country of origin, and all manufacturer part #’s for the listed surgical tools.

2. Are you the manufacturer, distributor, or equivalent solution to the above items? If not, can you provide additional information, as shown below? This confirms compliance with the nonmanufacturer rule IAW 13 CFR 121.406(b) Nonmanufacturers.

3. If you’re a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter, assemble, or modify the items requested in any way? If you do, state how and what is changed, assembled, or modified.

4. If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, Point of Contact, and size status (if available).

5. Please review salient characteristics/statement of need (if applicable) and provide feedback or suggestions.

Responses to this Sources Sought Notice shall be submitted directly via email to jefferson.mann@va.gov. Responses that only include generic marketing material and do not provide part numbers to determine capability to meet requirements may not be considered. Responses must be received no later than 7:00 am ET, 2/19/2025. No solicitation document is available at this time. This notice is simply for Market Research Purposes Only. All information received in response to this RFI that is marked as proprietary will be handled accordingly. The VA will not reimburse any potential contractors for any costs associated with this Sources Sought Notice.

Page 1 of

STATEMENT OF NEED (SON)

ENT Surgical Instrumentation

Background:

The Adult Laryngoscopy Sets, Micro Laryngoscopy Sets as well as the FESS Instrument Sets are used to perform various surgical procedures involving the Sinus Cavity. Currently the OR only has enough sets of the required ENT instruments and FESS instruments for the current ENT staff. The lack of additional instruments for the two new ENT providers is impacting patient care and the ability to schedule surgeries. Additionally, if an instrument is dropped during surgery, we must have a backup set, as the VA is not permitted to flash sterilize an item this presents a safety issue for the patient in surgery. It is mandated by SPS policy to have additional sets in order to have sterile instruments/scopes available should something fail or become contaminated.

Scope of Work: The primary objective is to equip the ENT department with state-of-the-art instrumentation sets to enhance the quality and efficiency of surgical procedures. The instrumentation sets must meet industry standards and be compatible with existing Olympus Towers used to provide light and power.

The contractor shall provide the following:

Karl Storz part numbers meet all requirements and are listed for reference of salient characteristics only.

Adult Laryngoscopy Sets: Used for examining and performing surgical interventions in the laryngeal region.

8587A: OPERATING LARYNGOSCOPE, ADULT SIZE, DISTAL END:18MM, LENGTH:15CM

8587GF: FIBER OPTIC LIGHT CARRIER, F/8587A/AA/KK LINDHOLM LARYNGOSCOPE, LENGTH:7.5CM 8587M: INSERTABLE SUCTION TUBE, F/8587A/AA/KK LINDHOLM LARYNGOSCOPE, LENGTH:8.5CM

8587K: INJECTION CANNULA, F/8587A/AA/KK LINDHOLM LARYNGOSCOPE,

LENGTH:8.5CM

8890A: DEDO OPERATING LARYNGOSCOPE, W/EXTRA LIGHT WEIGHT HANDLE, LENGTH: 18CM

8574LG: FIBER OPTIC LIGHT CARRIER F/8590KL LARYNGOSCOPE, LENGTH:14

8574LN: SUCTION TUBE FOR 8590KL LARYNGOSCOPE, LENGTH:14CM

8589C: RUDERT ANTERIOR COMMISSURE TRIANGULAR LARYNGOSCOPE, MEDIUM SIZE, LENGTH:17CM

8574LF: FIBER OPTIC LIGHT CARRIER F/8590AL/BL/CL/ DL/JA/KL/+8589B/C

LARYNGOSCOPES, L:16CM

8574LM: INSERTABLE SUCTION TUBE F/8590AL/BL/CL/ DL/JA/KL + 8589B/C

LARYNGOSCOPES,L:16CM

8574SL: BENJAMIN SLIMLINE OPERATING LARYNGOSCOPE FOR USE WITH 497AC CLIP

8574GY: BENJAMIN PROXIMAL JET CANNULA MALLEABLE, 2MM X 13.5CM

8574GZ: BENJAMIN PROXIMAL JET CANNULA MALLEABLE, 3MM X 13.5CM

8580BK: HOLINGER ANTERIOR COMMISSURE, LARYNGOSCOPE, ADULT SIZE, LENGTH 17 CM

497AC: BENJAMIN-HAVAS CLIP F/PROX ILLUMINATION

495NA-ENT: LIGHT CABLE, 3.5MM X 230CM

8575KC: BENJAMIN-PARSONS LARYNGOSCOPE HOLDER W/LATERAL STABILIATION SCREWS, RING 12CM

5984302-HN: CAPNUT/D-1587M, 6.0 CAP SCREW F/SUSPENSION SYSTEM SUPPORT ROD

8575L: GOETTINGEN SUPPORT TABLE F/ LARYNGOSCOPE HOLDERS 8575K/KC,8574KT/KW, AUTOCLAVABLE 10005AA: HOPKINS II 0º TELESCOPE, 4MM X 30CM F/BRONCHOSCOPY, ESOPHAGOSCOPY, AUTOCLAVE

8591A: LARYNGEAL CUTTING FORCEPS W/ROUND 2MM CUP JAWS, STRAIGHT,WL:23CM

8591T: LARYNGEAL SPOON FORCEPS W/ROUND 4MM CUP JAWS, STRAIGHT, WL:23CM

8591B: CUTTING FORCEPS WITH ROUND 2MM CUP JAWS, CURVED UP, WL:23CM

8591U: LARYNGEAL CUTTING FORCEPS WITH ROUND 4MM CUP JAWS CURVED UP, WL:23CM

8591C: CUTTING FORCEPS WITH ROUND 2MM CUP JAWS CURVED RIGHT, WL:23CM

8591D: CUTTING FORCEPS WITH ROUND 2MM CUP JAWS CURVED LEFT, WL:23CM

8593A: ALLIGATOR FORCEPS W/O RATCHET, STRAIGHT, SERRATED, WL:23CM

8593B:ALLIGATOR FORCEPS, CURVED RIGHT,W/O RATCHET, WORKING LENGTH:23CM

8593C: ALLIGATOR FORCEPS,CRVD LEFT W/O RATCHET, SERRATED, WL:23CM

8593E: ALLIGATOR FORCEPS,CRVD UP W/O RATCHET, SERRATED, WL:23CM

8594A: LARYNGEAL SCISSORS, STRAIGHT WORKING LENGTH:23CM

8594B: LARYNGEAL SCISSORS ANGLED 45º, WORKING LENGTH:23CM

8594C: LARYNGEAL SCISSORS CURVED RIGHT, WORKING LENGTH:23CM

8594D:KLEINSASSER LARYNGEAL SCISSORS CURVED LEFT, WORKING LENGTH:23CM

8593GM: LARYNGEAL MINI GRSP FCPS,CURVED UP RIGHT W/TRIANGULAR FENSTRATED JAWS, WL:23CM 8593HM: LARYNGEAL MINI GRSP FCPS,CURVED UP LEFT W/TRIANGULAR FENSTRATED JAWS, WL:23CM

8596P: RUDERT PROTECTOR, ROUND, CURVED UP W/SUCTION CHANNEL, Ø:5MM, LENGTH: 23CM

8596R: RUDERT PROTECTOR, OVAL, CURVED UP W/SUCTION CHANNEL, Ø:7MM, LENGTH:23CM

8660N: NEEDLE HOLDER W/RATCHET STRAIGHT,SERRATED 1.8X3.5MM JAW, WL:23CM

8654B: VOCAL CORD/FALSE CORD RETRACTOR SELF RETAINING W/RATCHET HANDLE, WL:24CM

8602: SUCTION TUBE, W/CUTOFF HOLE, Ø: 2MM, LENGTH: 23CM

8603: SUCTION TUBE, W/CUTOFF HOLE Ø: 2.5MM, LENGTH: 23CM

8604: SUCTION TUBE, W/CUTOFF HOLE, Ø: 3MM, LENGTH: 23CM

8604E: SUCTION TUBE, Ø: 4MM, LENGTH: 23CM

8615A: BIPOLAR FORCEPS, 45º UPTURNED WL:23CM

8615AS: BIPOLAR SUCTION FORCEPS, 45ºUPTURNED W/SUCTION CHANNEL, WL:23CM

847002V: BIPOLAR HIGH FREQUENCY CORD, LGTH:450CM F/461010,461015,and

8615A,8615AS FORCEPS

8606E: STEINER INSULATED SUCTION/COAG TUBE WITH ERGONOMIC HANDLE, Ø:2.5MM, WL:23CM

8606F: STEINER INSULATED SUCTION/COAG TUBE WITH ERGONOMIC HANDLE, 3.5MM X 23CM

26006M-HN: MONOPOLAR HIGH FREQUENCY CORD W/8MM PLUG F/VALLEYLAB ELECTROSURGICAL UNITS, 300CM KSZ-39301BS-ZBD: SEALED CONTAINER SYSTEM FOR 2 TELESCOPES TO 5.5MMX35C, STEAM/STERRAD, 18.5"X6"X3"

KSZ-39312C-ZBD: TWO LAYER STERILIZATION CONTAINER SYSTEM DM: 23.5"L X 11"W X 8"H

Micro Laryngoscopy Sets:

8657H: STANDARD RING HANDLE F/USE W/3MM INSTRUM FOR

PHONOSURGERY/ENDOLARYNGEAL, LGTH:9CM

8656A: DELICATE SICKLE KNIFE 3MM TO 1MM TAPERED SHAFT, LENGTH:23CM

8656B: STRAIGHT CUTTING SICKLE KNIFE W/DELICATE 3MM TO 1MM TAPERED

SHAFT,LENGTH:23CM

8656C: VERTICAL CUTTING ROUND KNIFE W/DELICATE 3MM TO 1MM TAPERED SHAFT, LENGTH:23CM

8656D: STRAIGHT LANCET KNIFE W/DELICATE 3MM TO 1MM TAPERED SHAFT,

LENGTH:23CM

8656E: STRAIGHT NEEDLE, SHARP, DELICATE, 3MM TO 1MM TAPERED SHAFT,

LENGTH:23CM

8656F: SHARP 90º HOOK 1MM, DELICATE 3MM TO 1MM TAPERED SHAFT, LENGTH:23CM

8656G: SHARP 90º HOOK 2MM, DELICATE 3MM TO 1MM TAPERED SHAFT, LENGTH:23CM

8656J: STRGHT DISSECTOR,1.3MM BALL END,DELICATE 3MM TO 0.6MM TAPERED

SHAFT, LGTH:23CM

8656L: SLIGHTLY CRVD BLUNT ELEVATOR, DELICATE 3MM TO 1MM TAPERED SHAFT,LENGTH:23CM 8656LS: SLGHTLY CRVD SHARP ELEVATOR, DELICATE 3MM TO 1MM TAPERED SHAFT, LENGTH:23CM

8656N: BLUNT 15º ANGLED ELEVATOR, DELICATE 3MM TO 1MM TAPERED SHAFT, LENGTH:23CM

8656R: STRAIGHT OVAL SPOON CURETTE, DELICATE 3MM TO 1MM TAPERED SHAFT, LENGTH:23CM 8656S: 35º ANGLED OVAL SPOON CURETTE, DELICATE 3MM TO 1MM TAPERED SHAFT,LENGTH:23CM 8659C: FEHLAND NEEDLE HOLDER, DELICATE, RATCHET JAW:2X4MM,DIAM:3MM,90ºANGL RT,LGTH:20CM 8659D: FEHLAND NEEDLE HOLDER, DELICATE, RATCHET JAW:2X4MM,DIAM:3MM, 90º ANGL LEFT,L:20CM

8660P: NEEDLE HOLDER, W/O RATCHET STRAIGHT, DELICATE JAW:2.8X3.5MM,L:20CM

8681A: MICRO FORCEPS W/1MM CUP JAWS, STRAIGHT WORKING LENGTH:20CM

8681B: MICRO FORCEPS WITH 1MM CUP JAWS, CURVED UP, WORKING LENGTH:20CM

8681C: MICRO FORCEPS, 1MM CUP JAWS, CURVED RIGHT, WORKING LENGTH:20CM

8681D: MICRO FORCEPS, 1MM CUP JAWS, CURVED LEFT, WORKING LENGTH:20CM

8683A: MICRO ALLIGATOR FORCEPS WITH SERRATED JAWS STRAIGHT, WORKING LENGTH:20CM

8683B: MICRO ALLIGATOR FORCEPS WITH SERRATED JAWS CURVED UP, WORKING LENGTH:20CM

8683C: MICRO ALLIGATOR FORCEPS WITH SERRATED JAWS CURVED RIGHT, WORKING LENGTH:20CM 8683D: MICRO ALLIGATOR FORCEPS WITH SERRATED JAWS CURVED LEFT, WORKING LENGTH:20CM

8686A: MICRO GRASPING FORCEPS W/HOLLOW JAWS AND STRAIGHT SERRATED TIPS, WL:20CM

8683G: MICRO GRASPNG FORCPS,TRIANGL FENSTRD JAW VERY DELICATE, CRVD UP RIGHT, WL:20CM 8683H: MICRO GRASPNG FORCPS,TRIANGL FENSTRD JAW VERY DELICATE, CRVD UP LEFT, WL:20CM

8684A: MICRO SCISSORS, STRAIGHT WORKING LENGTH:20CM

8684B: MICRO SCISSORS CURVED UPWARDS WORKING LENGTH:20CM

8684C: MICRO SCISSORS CURVED RIGHT WORKING LENGTH:20CM

8684D: MICRO SCISSORS CURVED LEFT WORKING LENGTH:20CM

8591AM: MINI FORCEPS WITH ROUND 1MM CUP JAWS, STRAIGHT, WL:23CM

8591BM: MINI FORCEPS WITH ROUND 1MM CUP JAWS CURVED UP, WL:23CM

8591CM: MINI FORCEPS WITH ROUND 1MM CUP JAWS CURVED RIGHT, WL:23CM

8591DM: MINI FORCEPS WITH ROUND 1MM CUP JAWS CURVED LEFT, WL:23CM

8593AM: MINI ALLIGATOR GRASPING FORCEPS, STRAIGHT, WL:23CM

8593EM: MINI GRASPING FORCEPS CRVD UP, SERRATED, WL:23CM

8593BM: MINI GRASPING FORCEPS CRVD RIGHT, SERRATED, WL:23CM

8593CM: KLEINSASSER MINI GRASPING FORCEPS CURVED LEFT, SERRATED, WL:23CM

8593GM: LARYNGEAL MINI GRSP FCPS,CURVED UP RIGHT W/TRIANGULAR FENSTRATED JAWS, WL:23CM 8593HM: LARYNGEAL MINI GRSP FCPS,CURVED UP LEFT W/TRIANGULAR FENSTRATED JAWS, WL:23CM

8594AM: KLEINSASSER MINI LARYNGEAL SCISSORS STRAIGHT, WORKING LENGTH:23CM

8594BM: MINI LARYNGEAL SCISSORS ANGLED 45º, WORKING LENGTH:23CM

8594CM: MINI LARYNGEAL SCISSORS CURVED RIGHT, WORKING LENGTH:23CM

8594DM: MINI LARYNGEAL SCISSORS CURVED LEFT, WORKING LENGTH:23CM

8691A: SUCTION TUBE W/CUT OFF HOLE, TIP W/ CENTRAL OPENING, Ø:1MM,

LENGTH:20CM

8691B: SUCTION TUBE W/CUT OFF HOLE, TIP W/ CENTRAL OPENING, Ø:1.5MM, WL:20CM

8691C: SUCTION TUBE W/CUT OFF HOLE TIP W/CENTRAL OPENING, OD:2MM, WL:20CM

8692A: SUCTION TUBE W/CUT OFF HOLE,TIP CLOSD W/2 LATERAL OPENINGS, OD:1MM, WL:20CM 8692B: SUCTION TUBE W/CUT OFF HOLE,TIP CLOSD W/2 LATERAL OPENINGS, Ø:1.5MM, WL:20CM 8692C: SUCTION TUBE W/CUT OFF HOLE,TIP CLOSD W/2 LATERAL OPENINGS, Ø:2MM, WL:20CM

8602: SUCTION TUBE, W/CUTOFF HOLE, Ø: 2MM, LENGTH: 23CM

8603: SUCTION TUBE, W/CUTOFF HOLE Ø: 2.5MM, LENGTH: 23CM

8604: SUCTION TUBE, W/CUTOFF HOLE, Ø: 3MM, LENGTH: 23CM

8656VL: SUCTION ELEVATOR,ANGLR,CRVD LFT DELICATE LUER,TAPERED

SHEATH,WL:21CM, LGTH:23CM

8656VR: SUCTION ELEVATOR,ANGLR,CRVD RT,DELICATE LUER,TAPERED

SHEATH,WL:21CM, TOTAL:23CM

8693A: STRAIGHT PROBE, Ø:1MM, LENGTH: 20CM

8693B: 45º ANGLE PROBE, Ø: 1MM, LENGTH: 20CM

39224EA-ZBD: PHONOSURGERY STERILIZATION TRAY, ALUMINUM, 20.5" X 9.75" X 4.5" (WDH)

Fess Sets: Used for Sinus Surgery:

628001: SHARP POINTED SICKLE KNIFE, LENGTH:19CM

479100: DOUBLE-ENDED COTTLE ELEVATOR, SEMI SHARP AND BLUNT, GRADUATED, LENGTH:20CM

474000: DOUBLE-ENDED FREER ELEVATOR LENGTH:20CM

629820:DOUBLE-ENDED PROBE/OSTIUM SEEKER, BALL TIPS, SIZES:1.2MM/2.0MM, LGTH:19CM

628702:MAXILLARY SINUS OBLONG ANTRUM CURETTE, SMALL SIZE, LENGTH:19CM

529307: FRAZIER SUCTION TUBE WITH CALIBRATIONS MARKED AT 5-9CM, 2.3MM X 10CM

529309: FRAZIER SUCTION TUBE WITH CALIBRATIONS MARKED AT 5-9CM, 3MM X 10CM

474001: FREER SUCTION ELEVATOR, LENGTH:19CM DISTAL TIP WIDTH:

4.8MMLENGTH:19CM

449201: RHINOFORCE STRAIGHT NASAL SCISSORS WORKING LENGTH:13CM

449202: RHINOFORCE NASAL SCISSORS, CURVED RIGHT WORKING LENGTH:13CM

449203: RHINOFORCE NASAL SCISSORS, CURVED LEFT WORKING LENGTH:13CM

455500: TAKAHASHI STRAIGHT ETHMOID FORCEPS WORKING LENGTH:11CM

456000B: BLAKESLEY RHINOFORCE NASAL FORCEPS STRAIGHT, SIZE 0, 3MMX8.5MM, WL:13CM

456001B: BLAKESLEY RHINOFORCE NASAL FORCEPS STRAIGHT, SIZE:1, 3.5X9MM,

WL:13CM

456002B: BLAKESLEY RHINOFORCE NASAL FORCEPS STRAIGHT, SIZE:2, 4X13MM,

WL:13CM

456500B:BLAKESLEY-WILDE RHINOFORCE NASAL FORCEPS 45º UPTURNED,SIZE:0, WL:13CM

456501B:BLAKESLEY-WILDE RHINOFORCE NASAL FORCEPS 45º UPTURNED,SIZE:1, WL:13CM

456502B: RHINOFORCE BLAKESLEY-WILDE NASAL FORCEPS 45º UPTURNED, SIZE:2, 4X13MM, WL:13CM

456802B: BLAKESLEY-WILDE RHINOFORCE NASAL FORCEPS 90º UPTURNED, SIZE:2, WL:13CM

451001B: BLAKESLEY RHINOFORCE STRGHT NASAL FORCPS THRU CUT, SIZE:1,

WIDTH:3.5MM, WL:13CM

451002B: BLAKESLEY RHINOFORCE STRGHT NASAL FRCPS THRU CUTTING, SIZE:2, WIDTH:4MM, WL:13CM

451500B: BLAKESLEY RHINOFORCE NASAL FORCEPS 45ºUP, THRU CUT, SIZE:0, 3MM X 13CM

451501B: BLAKESLEY RHINOFORCE NASAL FORCEPS,45ºUP THRU CUT, SIZE:1, 3.5MM X 13CM

451502B :BLAKESLEY RHINOFORCE NASAL FORCEPS 45ºUP, THRU CUT, SIZE:2, 4MM X 13CM

459016: STAMMBERGER ANTRUM PUNCH, 360º ROTATABLE SHEATH W/LOCKING SCREW, ADULT, WL:10CM 653000: HEUWIESER ANTRUM GRASPING FORCEPS CRVD 90º, JAWS CRVD DWNWRD, LENGTH:10CM 653005: HEUWIESER ANTRUM GRASPING FORCEPS W/LONG CURVE D0WNWARD 115º, FIXED JAW, WL:10CM 586031: V.EICKEN LONG CURVED ANTRUM CANNULA, LUER, W/THUMB CONTROL, Ø:3MM, WL: 12.5CM 586241: V.EICKEN SHORT CURVED ANTRUM CANNULA,W/ CUT-OFF HOLE,LUER-LOCK, Ø:4MM, WL:12.5CM 586231: V.EICKEN SHORT CURVED ANTRUM CANNULA, LUER-LOCK,THUMB CONTROL, Ø:3MM, WL12.5CM

XUSM0134: PUNCH, CIRCULAR CUTTING, 3.5MM X 18CM

648500: HAJEK-KOFLER SPHENOID PUNCH,REVERSIBLE SIZE 3.2X 4MM, WL:17CM

662111: KERRISON PUNCH, DOWNBITING 90º NOT THRU CUT , SIZE 1MM, WL:17CM

662112: KERRISON PUNCH, DOWNBITING 90º NOT THRU CUT, SIZE 2MM, WL:17CM

662122: KERRISON PUNCH, UPBITING 40º FORWARD SIZE 2MM, WORKING LENGTH:17CM

662123: KERRISON PUNCH, UPBITING 40º FORWARD SIZE 3MM, WORKING LENGTH:18CM

461010: STAMMBERGER BIPOLAR FORCEPS,15ºUPTURNED W/SUCTION CHANNEL, WORKING LENGTH:12.5CM 461015: STAMMBERGER BIPOLAR FORCEPS,45ºUPTURNED W/SUCTION CHANNEL, WORKING LENGTH:12.5CM 847002V: BIPOLAR HIGH FREQUENCY CORD, LGTH:450CM F/461010,461015,and

8615A,8615AS FORCEPS

839330: BRINER BIPOLAR SUCTION CANNULA,ANGULAR, INSULATED, O.D. 4.5MM, WL: 11CM

847000V: BIPOLAR HIGH FREQUENCY CORD,LENGTH:450CM

KSZ-39312FESS-ZBD: CONTAINER SYSTEM FOR FESS INSTRUMENTS 18.1" X 11" X 8" (46X28X20.3 CM)

628714: KUHN-BOLGER FRONTAL SINUS CURETTE, 90º CURVE, SMALL, OBLONG,

LENGTH:19CM

628002: BLUNT SICKLE KNIFE, DOUBLE CUTTING LENGTH:19CM

629703: ANTRUM CURETTE, SMALL SIZE FORWARD CUTTING, LENGTH:19CM

629704: ANTRUM CURETTE, SMALL SIZE BACKWARD CUTTING, LENGTH:19CM

529305: FRAZIER SUCTION TUBE WITH CALIBRATIONS MARKED AT 5-9CM, 1.5MM X 10CM

586225: V.EICKEN SHORT CURVED ANTRUM CANNULA LUER-LOCK, Ø:2.5MM, WL: 12.5CM

629822: CASTELNUOVO POSITIONING INSTRUMENT, DBL-ENDED,CRVD/DBL CRVD,4 PINS,LGTH:22CM

459012: STAMMBERGER ANTRUM PUNCH FORCEPS LEFT SIDE BACKWARD CUTTING, WL: 10CM

459011: STAMMBERGER ANTRUM PUNCH FORCEPS RIGHT SIDE BACKWARD CUTTING, WL:10CM

459151: STAMMBERGER SILCUT ANTRUM PUNCH, RIGHT SIDE DOWNWARD/FORWARD CUTTING, WL:10CM 459152: STAMMBERGER SILCUT ANTRUM PUNCH, LEFT SIDE DOWNWARD/FORWARD CUTTING, WL:10CM 451021: BLAKESLEY SILCUT STRAIGHT NASAL CUTTING FORCEPS, THRU CUTTING, SIZE:1, WL:13CM 451521: BLAKESLEY SILCUT NASAL CUTTING FORCEPS THRU CUT, 45º UPTURNED, SIZE:1, WL:13CM 456521: BLAKESLEY SILCUT NASAL FORCEPS, 45º UPTURNED, NOT THRU CUT, SIZE:1, WL:13CM

456021: BLAKESLEY SILCUT STRAIGHT NASAL FORCEPS NOT THRU CUT,SIZE:1,

WORKING LENGTH:13CM

653001: HEUWIESER ANTRUM GRASPING FORCEPS, CRVD 90º, JAWS CRVD UPWARD, LENGTH:10CM

651210: KUHN-BOLGER GIRAFFE FORCEPS, 55º UP VERTICAL OPENING, 3MM JAW,

WL:12CM

651220: KUHN-BOLGER GIRAFFE FORCEPS, 55º UP HORIZONTAL OPENING, 3MM JAW, WL:12CM

39301F-ZBD: GENERIC STERILIZATION/STORAGE TRAY 9.8" X 9.8" X 1.8"

39301F: GENERIC STERILIZATION/STORAGE TRAY 9.8" X 9.8" X 1.8

See attached document: SSN Instrument Spreadsheet.

End of Document Page 1 of