P02 Sources Sought Notice 36C24424Q0750 - MonsterCave Weight System.docx

Sources Sought Notice Sources Sought Notice

GENERAL INFORMATION

SET-ASIDE

Network Contracting Office 4 Commodities 1 3900 Woodland Avenue Philadelphia, PA 19104

POINT OF CONTACT*

Contract Specialist Tyler Kraft tyler.kraft@va.gov

PLACE OF PERFORMANCE

1010 Delafield Road

Pittsburgh PA

ADDITIONAL INFORMATION

AGENCY’S URL

URL DESCRIPTION

AGENCY CONTACT’S EMAIL ADDRESS

EMAIL DESCRIPTION

DESCRIPTION

THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A SOLICITATION ANNOUNCEMENT.

This Sources Sought Notice is intended for information and planning purposes only at this time and shall not be construed as a solicitation or as an obligation on the part of the Department of Veterans Affairs. Because this is a Sources Sought announcement, no evaluation letters and/or results will be issued to the respondents. No solicitation exists. Therefore, do not request a copy of a solicitation.

The Department of Veterans Affairs (VA), VISN 4, Network Contracting Office 4 (NCO 4), Commodities 1 is seeking information and potential qualified sources capable of providing the BRAND NAME OR EQUAL equipment listed below.

Delivery Location:

These items will be delivered to H. John Heinz III Department of Veterans Affairs Medical Center in Pittsburgh, PA.

General Requirement:

The Physical Medicine & Rehabilitation (PM&R) at the VA Pittsburgh Healthcare System (VAPHS) is requesting the purchase of one (1) BRAND NAME OR EQUAL Rogue MonsterCave Weight Set. All equipment will be solicited and awarded together. The equipment must meet the specific requirements listed below.

Specific Requirements:

BRAND NAME OR EQUAL to the Monster Cave Weight System

· Rack must have spotter arms for patient safety

· Rack must have cable-pulley system

· Rack must be made of at least 11 gauge steel

· Must have attachments for cable crossover movements

· Must include lat pulldown and low row capability

· Must have a safety strap system with a safety rating of at least 10,000 lbs

· Must have safety spotter arms capable of withstanding bar drops of at least 800 lbs

· Dimensions must be within the following:

· 100” upright height

· 43” side panel width

· 41” Rack

WARRANTY: MANUFACTURER’S STANDARD WARRANTY

Installation, including verification/validation, training:

1. Contractor must provide all necessary procedure manuals, troubleshooting manuals and operator manuals.

2. The equipment shall be assembled and installed by the Contractor who is certified on the Contractor’s equipment.

a. Installation will occur at the PM&R sections at UD and HZ.

b. Assembly is required at the final room of delivery

c. Vendor will remove all packaging material

The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the Government that the interested parties can provide the supplies/services that fulfill the required specifications mentioned above.

Responses to this Sources Sought Notice should include answered the following questions:

NAICS: 339920

Size Standard: 750 employees

(1) Provide company name, address, point of contact, phone number, point of contact e-mail, UEI Number, and size of business pursuant to North American Industrial Classification System (NAICS) code above.

(2) Indicate the size status and representations of your business, such as but not limited to Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc.

(3) Provide Brand Name, Model and Part Number, and Brief Description of the product you could provide.

(4) Provide anticipated delivery lead time.

(5) Are you the manufacturer, distributor, or an equivalent solution to the items being referenced above?

(6) Is the product you are providing information about made by a small business manufacturer or a large business?

(7) Is the product you are providing information about manufactured in the United States? If not, please provide the country where the unit is manufactured.

(8) If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, point of Contact and size status (if available).

(9) If you’re a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter, assemble, and/or modify the items requested in any way? If you do, state how and what is altered, assembled, and/or modified?

(10) If you are an FSS GSA/NAC contract holder or other federal contract holder, are the items/solution you are providing information for available on your schedule/contract? If so, please provide the contract number.

(11) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award.

(12) Please submit your capabilities regarding the salient characteristics detailed above to establish capabilities for planning purposes.

(13) Please review salient characteristics/statement of work (if applicable) and provide feedback or suggestions that would allow for maximum competition. If none, please reply as N/A.

This Sources Sought Notice will be conducted in accordance with Federal Acquisition Regulation (FAR) Part 10 – Market Research. Telephone responses will not be accepted. Responses must be received in writing via e-mail to the Contracting Point of Contact listed below by the date listed below. This notice will help the VA in determining available potential sources only. Do not contact VA Medical Center staff regarding this requirement, as they are not authorized to discuss this matter related to this procurement action. All questions will be addressed by the Contracting POC listed below.

Contracting Point of Contact: Tyler Kraft, tyler.kraft@va.gov Responses Due: Monday, June 17th 2024 at 12:00 PM Eastern Time

DISCLAIMER

All firms responding to this Sources Sought Notice are advised that this is not a request for quote and that any quote submitted in response to this notice will not be considered for award. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract.

This notice does not commit the Government to contract for any supplies or services. The Government will not pay for any information or administrative cost incurred in response to this Source Sought Notice.

This Sources Sought Notice is issued solely for information and planning purposes only and does not constitute a solicitation. If a solicitation is issued, it will be posted on SAM.gov under Contract Opportunities at a later date for all qualified interested parties and interested parties must respond to the solicitation to be considered for award.

Respondents are solely responsible for properly marking and clearly identifying any proprietary information or trade secrets contained within their response. The Government will not be liable for or suffer any consequential damages for any proprietary information that has not been both properly marked and clearly identified. Information marked proprietary received in response to this RFI will be safeguarded and handled in accordance with applicable Government regulations. To aid the Government in its review, please segregate proprietary information.

End of Document

Sources Sought Notice