S02_36C24127Q0068.pdf
PDF 441 KB Posted
- Attached to
- Emergency Door Repair Service with 4 (1-year Option periods) at the Bedford VA Medical Facility
- Solicitation number
- 36C24127Q0068
About this file
This is a Combined Synopsis/Solicitation Notice for Emergency Door Repair Service at the Bedford VA Medical Facility in Bedford, Massachusetts. The solicitation is issued as a Request for Quote (RFQ) under solicitation number 36C24127Q0068, with a response deadline of December 4, 2026 at 12:00 PM Eastern Time. The contract is set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSBs) and is classified under NAICS code 238990 (All Other Specialty Trade Contractors) with a small business size standard of $19.0 million. The contracting office is the Department of Veterans Affairs, Network Contracting Office 1 in Augusta, Maine, with Contract Specialist Yolanda Rankin as the primary point of contact.
The scope of work includes three line items: (1) Annual maintenance for emergency door repair service at 12 months per year; (2) Standby automatic door repair labor at 160 hours per contract year; and (3) Automatic-door parts and materials with a government-established not-to-exceed (NTE) amount for approximately 25 doors on an as-needed basis. The contractor must respond to emergency service calls within eight hours and routine service requests within two calendar days. The base contract period runs from December 15, 2026 through December 14, 2027, with four one-year option periods extending through December 14, 2031. The Government will award a firm-fixed-price contract and will evaluate quotations based on technical capability, past performance, and price. Offerors must submit a price schedule, past performance worksheet, and certificate of compliance with VAAR 852.219-75 (limitations on subcontracting). All personnel must be fully qualified technicians, and the contractor must maintain a prioritized contact list, provide service reports for each visit, submit safety plans, and comply with facility security and infection control requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1_Service Contract Labor Standards Wage Determination.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Combined Synopsis/Solicitation Notice
*= Required Field Combined Synopsis/Solicitation Notice
SUBJECT* Emergency Door Repair Service with 4 (1-year Option periods) at the Bedford VA Medical Facility
GENERAL INFORMATION
CONTRACTING OFFICE’S ZIP CODE* 04330
SOLICITATION NUMBER* 36C24127Q0068
RESPONSE DATE/TIME/ZONE 12-04-2026 12:00PM EASTERN TIME, NEW YORK, USA
ARCHIVE 15 DAYS AFTER THE RESPONSE DATE
RECOVERY ACT FUNDS N
SET-ASIDE SDVOSBC
PRODUCT SERVICE CODE* Z1JZ
NAICS CODE* 238990
CONTRACTING OFFICE ADDRESS Department of Veterans Affairs
Network Contracting Office 1 (NCO 1) Contracting Officer (90C) 1 VA Center Augusta ME 04330
POINT OF CONTACT*
Contract Specialist Yolanda Rankin yolanda.rankin@va.gov
PLACE OF PERFORMANCE
ADDRESS Bedford VA Medical Facility 200 Springs Road
Bedford MA
POSTAL CODE 01730
COUNTRY
ADDITIONAL INFORMATION
AGENCY’S URL
URL DESCRIPTION
AGENCY CONTACT’S EMAIL ADDRESS
EMAIL DESCRIPTION
DESCRIPTION
Description
This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) part 12, “Acquisition of Commercial Products and Commercial Services,” as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued.
This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01, dated 3/13/2026.
This solicitation is a 100% Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside.
The associated North American Industry Classification System (NAICS) code for this procurement is 238990, All Other Specialty Trade Contractors, with a small business size standard of $19.0 million. The FSC/PSC is Z1JZ.
The Bedford VA Medical Center located at 200 Springs Rd, Bedford, MA 01730 is seeking an Emergency Door Repair Service Agreement with four (4) one-year option periods. The applicable Service Contract Labor Standards Wage Determination will be included as Attachment 1.
DEPARTMENT OF VETERANS AFFAIRS
STATEMENT OF WORK
Service Contract – Campus Wide Door Service
1.0 INTRODUCTION
The VA Medical Center at 200 Springs Road Bedford, MA is seeking a qualified contractor to perform comprehensive maintenance and repairs on all automatic doors and openers with four (4) one-year option periods at the Bedford VA Medical Facility. Service performance will be for the VAMC- Bedford.
2.0 BACKGROUND
The Facility Service, Maintenance Department, requires assistance in keeping up with required maintenance and repairs on the campus wide doors and door openers to ensure proper operations and prevent failure of the system. Contractor shall provide door maintenance and repairs to correct these deficiencies.
3.0 SCOPE
3.1 Item 1 – Stand-by Services (Labor)
• The contractor shall provide all personnel, equipment, tools vehicles, materials, supervision, and other items and services necessary to perform maintenance and repair tasks functions for the equipment described in the SOW.
• The contractor shall provide repair services to include labor costs for standby repair services related to repairs associated with doors across campus. These labor hours include labor hours associated with repairs to the automatic doors.
• The Contractor shall respond and schedule service within two (2) calendar days of notification, or as otherwise scheduled with the POC, including routine or non-emergency service requests.
• The Contractor shall provide 160 labor hours per contract year under this line item. The quantity applies to the Base Year and each Option Year, if exercised.
3.2 Item 2 – Materials and Parts (Non-Routine Repairs and Maintenance)
• The Contractor shall supply parts and materials for an estimated 25 doors as needed for necessary upgrades, replacement, and repairs. Preventive maintenance inspections are not scheduled at a recurring frequency; inspections and related services shall be performed on an as-needed basis when a door requires evaluation, upgrade, replacement, or repair. Parts and materials shall be provided in accordance with the contract CLIN structure and any applicable not-to-exceed (NTE) limits established by the Government. If the cost exceeds the applicable NTE amount, the Contractor shall provide the POC with a list of required repairs and a cost proposal within two (2) calendar days of the inspection.
• Repairs shall commence within 2 calendar days after the costs for repair have been agreed upon by the contractor or by the POC. All repairs shall be in accordance with the manufacturer’s requirements and\or applicable laws, regulations, codes, etc. All parts and materials shall be of the original manufacturer’s design and specification, or equal thereto. An extension may be granted at the discretion of the POC on a case-by-case basis. Each request for an extension must include an explanation for the delay, and estimated time of completion, and evidence to clearly show that the contractor has made every effort to repair the system as timely as possible. The contractor shall complete all authorized repairs within the agreed-upon timeframe. When completion is delayed by parts availability or circumstances beyond the contractor’s control, the contractor shall promptly notify the POC, explain the delay, and provide a revised completion date.
3.3 Item 3 – Option Years
The contractor shall provide pricing for Base with an additional 4 Option Years.
4.0 PERFORMANCE REQUIREMENTS
• All work shall be completed such that the integrity of the systems is maintained. All work shall be done in accordance with OSHA, EPA regulations, NFPA codes, with particular attention to VA codes, Federal, State, and local regulations throughout the course of this service contract.
• The contractor shall schedule all site visits, to include emergencies, with the POC.
• The contractor shall furnish authentic parts from the equipment manufacturer. The determination of when to replace parts is at the recommendation of the technician, with the POC’s concurrence. Additional service charges may be incurred to install parts during scheduled inspections or callbacks as specified in this agreement.
• The contractor shall operate on the premises during the hours of 0700 and 1530, unless otherwise authorized by the POC.
• The contractor shall respond within eight (8) hours for all emergency callbacks. For routine or non-emergency service requests, the contractor shall respond within two (2) calendar days or as otherwise scheduled with the POC. The contractor shall meet the applicable response time for all service requests.
• Work sites shall be left in the same manner of cleanliness and order in which they were found. Contractors will provide their own waste disposal, if any.
• Personnel shall wear the proper personal protective equipment (PPE) at all times.
Work done under this project must comply with infection control requirements.
• Special care shall be taken to secure tools and construction equipment.
• Material Safety Data Sheets (MSDS’s) shall be submitted to the POC for approval for all hazardous materials before they are brought to the work site.
• End of day cleanup of the work area(s) is mandatory, and all trash shall be bagged and properly disposed of offsite.
• Contractor vehicles, including those of their employees, shall be parked in lots not marked as “Patients only”.
• All travel costs associated with performance of this contract are the responsibility of the Contractor and are provided at no additional cost to the government as part of this contract. Travel costs are defined but not limited to time and vehicle costs for personnel travelling to and from job site for all duties outlined in this specification, normal shipping charges on any parts or materials covered by this contract, costs associated with the normal shipping of parts or equipment out for repair that are covered under this contract, etc.
5.0 DELIVERABLES
• The Contractor shall provide a calendar year schedule identifying available service dates and points of contact for coordinating inspections, maintenance, and repair activities, at the commencement of the contract. Services shall be performed on an as-needed basis as requested by the Government and coordinated with the POC.
• The Contractor shall provide a prioritized phone support contact list at the commencement of the contract.
• The Contractor shall submit proposed equipment and materials to be used on site for review and approval by the POC.
• The Contractor shall submit the Contractor safety plan and lock-out tag-out plan.
• The Contractor shall submit the Safety Data Sheets (SDS) for all chemicals proposed to be brought to the medical center. Chemicals shall be approved before they can be located on property.
• The Contractor shall provide a service report, upon completion of each repair, inspection, or maintenance visit, containing the following information:
Each report shall include:
A. Name of the Contractor and Contract Number
B. Name of the Technician who performed services
C. Contractor service report.
D. Service hours utilized.
E. Parts allowance utilized and itemized parts replaced.
F. Total cost of the visit
G. Identification of the door assembly serviced, to the extent available, including location, ID number, manufacturer's name, fire-door designation, and any other manufacturer identification numbers. A comprehensive door inventory is not available; individual doors will be identified by the POC when service is requested.
6. QUALIFICATIONS
A. Each respondent shall have an established business, with an office and full-time staff.
The staff includes a "fully qualified" technician and a "fully qualified" technician who will serve as the backup.
B. "Fully Qualified" is based upon training and on experience in the field.
C. The technicians shall be authorized by the Contractor to perform the maintenance services. All work shall be performed by "Fully Qualified" competent technicians. The Contractor shall provide written assurance of the competency of their personnel and a list of credentials of approved technician. The CO may authenticate the training requirements, request training certificates or credentials from the Contractor at any time for any personnel who are servicing or installing any VAMC equipment. The CO and/or POC specifically reserve the right to reject any of the Contractor's personnel and refuse them permission to work on the VAMC equipment.
14. Recognized Holidays: The potential contractor could be required to perform services on holidays.
New Year’s Day Labor Day
Martin Luther King Jr.’s Birthday Columbus Day
President’s Day Veterans Day
Memorial Day Thanksgiving Day
Independence Day Christmas Day
15. Type of Contract: The Government will award a firm-fixed-priced contract for a base year and four additional option years.
16. Physical Security: The contractor shall be responsible for safeguarding all Government equipment, information, and property provided for contractor use. At the close of each work period, Government facilities, equipment, and materials shall be secured.
17. FACILITY ACCESS AND SECURITY REQUIREMENTS:
FACILITY ACCESS AND SECURITY REQUIREMENTS:
The Contractor shall coordinate all scheduled visits with the Government Point of Contact (POC) at least one (1) week in advance whenever practicable. This advance-notice requirement does not apply to emergency service calls or routine repair requests that must be performed within the response times established in the Statement of Work. Contractor personnel shall report to the designated facility entrance upon arrival, comply with all VA Bedford Healthcare System check-in and identification procedures, and visibly display any Government-issued visitor badge while onsite. Contractor personnel shall access only those areas necessary to perform the required services and shall comply with all applicable facility security, safety, infection-control, parking, smoking, and escort requirements. The Contractor shall provide the Government POC, in advance of each scheduled visit, the names of personnel requiring access. Contractor personnel shall not photograph, record, or access patient information, medical records, Government information systems, or restricted areas. Keys, badges, and other Government-issued access devices shall be safeguarded and returned as directed. The Contractor shall immediately report any lost badge, key, access device, security incident, property damage, spill, or unsafe condition to the Government POC. The Government reserves the right to deny or revoke facility access for any Contractor employee who fails to comply with these requirements.
The contract period of performance:
Base: 12/15/2026 – 12/14/2027
Option Year 1: 12/15/2027 – 12/14/2028
Option Year 2: 12/15/2028 – 12/14/2029
Option Year 3: 12/15/2029 – 12/14/2030
Option Year 4: 12/15/2030 – 12/14/2031
Place of Performance:
Bedford VA Medical Healthcare System, 200 Springs Road, Bedford, MA 01730
The following solicitation provisions apply to this acquisition:
1. 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions (Sep 2024)
2. FAR 52.203-18 Prohibition on Contracting with Entities (JAN 2017)
3. FAR 52.212-1, “Instructions to Offerors–Commercial Products and Commercial Services”
The following provision is incorporated into 52.212-1 as an addendum to this solicitation:
52.212-1 Instructions to Offerors—Commercial Products and Commercial Services
(SEP 2023)
(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the Request for Quote (RFQ). However, the small business size standard for a concern that submits a quote, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition—
(1) Is set aside for small business and has a value above the simplified acquisition threshold;
(2) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or
(3) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.
(b) Submission of Quotes. Submit signed and dated quotes to the office specified in this Request for Quote (RFQ) at or before the exact time specified in this solicitation. Quotes may be submitted on letterhead stationery, or as otherwise specified in the solicitation. As a minimum, quotes must show—
(1) The solicitation number.
(2) The time specified in the solicitation for receipt of quotations;
(3) The name, address, and telephone number of the quoter;
(4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;
(5) Terms of any express warranty;
(6) Price and any discount terms;
(7) "Remit to" address, if different than mailing address;
(8) Certifications that the offeror shall complete electronically);
(9) Acknowledgment of Quotation Amendments;
(10) Past performance information
(11) Demonstrate ability to perform the requirements of the Statement of Work.
(12) A signed certificate of compliance with 852.219-75 “VA Notice Limitations on Subcontracting – Certificate of Compliance for Services and Construction” (Attachment 4)
(13) Quotes should include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotes that fail to furnish required representations, or information, or reject the terms and conditions of the solicitation may be excluded from consideration.
Quoters shall list exception(s) and rationale for the exception(s), if any
(c) Period for acceptance of Quotes. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of quotes, unless another time period is specified in an addendum to the solicitation.
(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotes. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during preaward testing.
(e) Multiple Quotes. Multiple or alternate quotations will not be accepted.
(f) Late submissions, modifications, revisions, and withdrawals of quotes.
(1) Quoters are responsible for submitting quotes, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that quotes or revisions are due.
(2) Any quote received at the Government office designated in the solicitation after the exact time specified for receipt of quotes is "late" and may not be considered unless it is received before purchase order issuance and the Contracting Officer determines that accepting the late quote would not unduly delay the acquisition.
(3) If an emergency or unanticipated event interrupts normal Government processes so that quotes cannot be received at the Government office designated for receipt of quotes by the exact time specified in the Request for Quote, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of quotes will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.
(g) Issuance of Purchase Order. The Government may issue a purchase order to one or more quoters as identified in the Request for Quote (RFQ). Therefore, the quoter’s initial quote should contain the best terms from a price and technical standpoint. However, the Government may reject any or all quotes if such action is in the public’s best interest. In addition, the Contracting Officer (CO) may issue a purchase order to other than the quoter with the lowest quoted price.
(h) Multiple awards. The Government may issue a purchase order for any item or group of items of a quotation, unless the quoter qualifies the quotation by specific limitations. Unless otherwise provided in the quotation, offers may not be submitted for quantities less than those specified in the RFQ. The Government reserves the right to issue a purchase order for a quantity less than the quantity quoted, at the unit prices quoted, unless the quoter specifies otherwise in the quote.
(i) Availability of requirements documents cited in the solicitation.
(1)
(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101–29, and copies of Federal specifications, standards, and product descriptions can be downloaded from the ASSIST website at https://assist.dla.mil.
evaluated separately.
(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained from the address in paragraph (i)(1)(i) of this provision.
(2) Most unclassified Defense specifications and standards may be downloaded from the ASSIST website at https://assist.dla.mil.
(3) Defense documents not available from the ASSIST website may be requested from the Defense Standardization Program Office by—
(i) Using the ASSIST feedback module ( https://assist.dla.mil/feedback); or
(ii) Contacting the Defense Standardization Program Office by telephone at 571–767–6688 or email at assisthelp@dla.mil.
(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.
(j) Unique entity identifier.(Applies to all quotes that exceed the micro-purchase threshold, and quotes at or below the micro-purchase threshold if the Request for Quote (RFQ) requires the Contractor to be registered in the System for Award Management (SAM).) The quoter shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity identifier that identifies the Quoter's name and address. The Quoter also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Quoter to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Quoter does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Quoter should indicate that it is planning to submit a quote for a Government Request for Quote (RFQ) when contacting the entity designated at www.sam.gov for establishing the unique entity identifier.
(k) [Reserved]
(l) Notification. The CO will not notify unsuccessful quoters that responded to this Request for Quotation (RFQ).
(End of provision)
Offerors must complete annual representations and certifications electronically via the System for Award Management (SAM) website located at https://sam.gov/.
https://sam.gov/
4. FAR 52.212-2 Evaluation-Commercial Products and Commercial Services
ADDENDUM to 52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND
COMMERCIAL SERVICES
(a) Basis for Award. The Government will issue a purchase order to the responsible quoter whose quotation conforming to the solicitation will be most advantageous to the Government, price and other factors considered. This acquisition is conducted using simplified acquisition procedures for the acquisition of commercial products and commercial services. The Government will evaluate quotations using a comparative evaluation process where quotations will be compared to one another to determine which provides the best benefit to the Government. The Government reserves the right to consider a quotation other than the lowest price that provides additional benefit(s). Each response must meet the minimum requirements of the solicitation.
(b) The following factors shall be used to evaluate quotations:
(1) Technical
(2) Past Performance
(3) Price
(c) Evaluation Approach. The Government will evaluate quotations using the comparative evaluation process where quotations will be compared to one another to determine which provides the best benefit to the Government. The Government reserves the right to consider a quotation other than the lowest price that provides additional benefit(s). Quotations may exceed minimum requirements of the solicitation. The Government reserves the right to select a quotation that provides benefit to the Government that exceeds the minimum requirements of the solicitation, but is not required to do so. Each response must meet the minimum requirements of the solicitation. The Government is not requesting or accepting alternate quotations. The evaluation will consider the following:
(1) Technical: The quotation will be evaluated to the extent to which it can meet and/or exceed the Government’s requirements as outlined in the solicitation and based on the information requested in the instructions to quoters section of the solicitation.
(2) Past Performance: The past performance evaluation will assess the relative risks associated with a quoter’s likelihood of success in fulfilling the solicitation’s requirements as indicated by the quoter’s record of past performance. The past performance evaluation may be based on the contracting officer’s knowledge of and previous experience with the supply or service being acquired; Customer surveys, and past performance questionnaire replies; Contractor Performance Assessment Reporting System (CPARS) at http://www.cpars.gov/; or any other reasonable basis.
(3) Price: The Government will evaluate the price by adding the total of all line item prices, including all options The Total Evaluated Price will be that sum.
(d) Options. The Government will evaluate quotations for award purposes by adding the total price for all options to the total price for the basic requirement. This includes options under FAR 52.217-8, Option to Extend Services, which applies to this solicitation. Evaluation of options under FAR 52.217-8 will be accomplished by adding six months of the quoter's price for the last potential period of performance under this contract to the quoter's total price. For example, if the contract includes option periods that are exercisable under FAR 52.217-9, the quoter's total price for the purpose of evaluation will include the base period, all option periods, and an additional six months of the last option period. Quoters must price only the base and option periods specified in the contract line-item numbers (CLINs) and shall not submit a price for the potential six-month extension of services under FAR 52.217-8. The Government reserves the right to exercise the option under FAR 52.217-8 before the end of any of the contractor's performance periods and will be exercised at the price and/or rates in effect at the time the clause is exercised. Evaluation of options shall not obligate the Government to exercise the option(s).
(End of Provision)
5. 52.219-1 Small Business Program Representations (FEB 2024)
6. 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran- Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024).
7. 52.229-11 Tax on Certain Foreign Procurements—Notice and Representation (JUN 2020)
(DEVIATION SEP 2025).
8. 52.233-2 Service of Protest (DEVIATION NOV 2025)
(a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government
Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from David Valenzuela, Contracting Officer, NCO 1, Department of Veteran Affairs at David.valenzuela2@va.gov.
(b) The copy of any protest shall be received in the office designated above within one-day of filing a protest with the GAO.
(End of provision)
9. 52.252-5 Authorized Deviations in Provisions (Nov 2020)
10. 52.252-6 Authorized Deviations in Clauses (Nov 2020)
11. 852.102(a) Solicitation Provisions or Clauses Incorporated by Reference (JAN 2008)
The following provisions or clauses incorporated by reference in this solicitation must be completed by the offeror or prospective contractor and submitted with the quotation or offer.
Copies of these provisions or clauses are available on the Internet at the Web sites provided in the provision at FAR 52.252-1, Solicitation Provisions Incorporated by Reference, or the clause at FAR 52.252-2, Clauses Incorporated by Reference. Copies may also be obtained from the contracting officer.
(End of provision)
852.219-75 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING—
CERTIFICATE OF COMPLIANCE FOR SERVICES AND CONSTRUCTION (JAN
2023) (DEVIATION)
(a) Pursuant to 38 U.S.C. 8127([l])(2), the offeror certifies that—
(1) If awarded a contract (see FAR 2.101 definition), it will comply with the limitations on subcontracting requirement as provided in the solicitation and the resultant contract, as follows: [Contracting Officer check the appropriate box below based on the predominant NAICS code assigned to the instant acquisition as set forth in FAR 19.102.]
(i) X Services. In the case of a contract for services (except construction), the contractor will not pay more than 50% of the amount paid by the government to it to firms that are not [certified] SDVOSBs [listed in the SBA certification database
]as set forth in 852.219-73 or [certified] VOSBs [listed in the SBA certification database] as set forth in 852.219-74. Any work that a similarly situated
[certified SDVOSB/VOSB] subcontractor further subcontracts will count towards the 50% subcontract amount that cannot be exceeded. Other direct costs may be excluded to the extent they are not the principal purpose of the acquisition and small business concerns do not provide the service as set forth in 13 CFR 125.6.
(ii) □ General construction. In the case of a contract for general construction, the contractor will not pay more than 85% of the amount paid by the government to it to firms that are not [certified] SDVOSBs [listed in the SBA certification database] as set forth in 852.219-73 or [certified] VOSBs [listed in the SBA certification database] as set forth in 852.219-74. Any work that a similarly situated [certified SDVOSB/VOSB] subcontractor further subcontracts will count towards the 85% subcontract amount that cannot be exceeded. Cost of materials are excluded and not considered to be subcontracted.
(iii) □ Special trade construction contractors. In the case of a contract for special trade contractors, the contractor will not pay more than 75% of the amount paid by the government to it to firms that are not [certified] SDVOSBs [listed in the
SBA certification database] as set forth in 852.219-73 or [certified] VOSBs [listed in the SBA certification database] as set forth in 852.219-74. Any work that a similarly situated [certified SDVOSB/VOSB] subcontractor further subcontracts will count towards the 75% subcontract amount that cannot be exceeded. Cost of materials are excluded and not considered to be subcontracted.
(2) The offeror acknowledges that this certification concerns a matter within the jurisdiction of an Agency of the United States. The offeror further acknowledges that this certification is subject to Title 18, United States Code, Section 1001, and, as such, a false, fictitious, or fraudulent certification may render the offeror subject to criminal, civil, or administrative penalties, including prosecution.
(3) If VA determines that an SDVOSB/VOSB awarded a contract pursuant to 38
U.S.C. 8127 did not act in good faith, such SDVOSB/VOSB shall be subject to any or all of the following:
(i) Referral to the VA Suspension and Debarment Committee;
(ii) A fine under section 16(g)(1) of the Small Business Act (15 U.S.C.
645(g)(1)); and
(iii) Prosecution for violating 18 [U.S.C. 1001].
(b) The offeror represents and understands that by submission of its offer and award of a contract it may be required to provide copies of documents or records to VA that VA may review to determine whether the offeror complied with the limitations on subcontracting requirement specified in the contract. Contracting officers may, at their discretion, require the contractor to demonstrate its compliance with the limitations on subcontracting at any time during performance and upon completion of a contract if the information regarding such compliance is not already available to the contracting officer.
Evidence of compliance includes, but is not limited to, invoices, copies of subcontracts, or a list of the value of tasks performed.
(c) The offeror further agrees to cooperate fully and make available any documents or records as may be required to enable VA to determine compliance with the limitations on subcontracting requirement. The offeror understands that failure to provide documents as requested by VA may result in remedial action as the Government deems appropriate.
(d) Offeror completed certification/fill-in required. The formal certification must be completed, signed and returned with the offeror’s bid, quotation, or proposal. The
Government will not consider offers for award from offerors that do not provide the certification, and all such responses will be deemed ineligible for evaluation and award.
Certification:
I hereby certify that if awarded the contract, [insert name of offeror] will comply with the limitations on subcontracting specified in this clause and in the resultant contract. I further certify that I am authorized to execute this certification on behalf of [insert name of offeror].
Printed Name of Signee:
Printed Title of Signee:
Signature:
Date:
Company Name and Address:
(End of clause)
Parent topic: Subpart 852.2 - Text of Provisions and Clauses
• 852.233-70 Protest Content/Alternative Dispute Resolution (SEP 2018).
• 852.233-71 Alternate Protest Procedure (SEP 2018).
52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998).
As prescribed in 52.107(a), insert the following provision:
This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):
https://www.acquisition.gov/browse/index/far.
https://www.acquisition.gov/far-overhaul
52.252-2 Clauses Incorporated by Reference (FEB 1998).
This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):
https://www.acquisition.gov/browse/index/far.
The following contract clauses apply to this acquisition:
• 52.204-7 System for Award Management—Registration (DEVIATION NOV 2025).
• 52.204-13 System for Award Management Maintenance. (DEVIATION NOV 2025).
https://www.acquisition.gov/vaar/subpart-852.2-text-provisions-and-clauses https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/far-overhaul https://www.acquisition.gov/browse/index/far
• 52.209-10 Prohibition on Contracting With Inverted Domestic Corporations.
(DEVIATION NOV 2025).
• 52.217-8 Option to Extend Services (NOV 1999).
• 52.217-9 Option to Extend the Term of the Contract (MAR 2000).
• 52.222-90 Addressing DEI Discrimination by Federal Contractors (APR 2026).
• 52.223-23 Sustainable Products. (May 2024) (DEVIATION NOV 2025).
• 52.228-5 Insurance-Work on a Government Installation (JAN 1997).
• 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023).
• 52.233-3 Protest after Award (DEVIATION NOV 2025).
• 52.233-4 Applicable Law for Breach of Contract Claim (DEVIATION NOV 2025).
• 52.237-2 Protection of Government Buildings, Equipment, and Vegetation (APR 1984).
• 52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (NOV 2025)
(DEVIATION)
(a) Definitions. As used in this clause—
American Security Drone Act-covered foreign entity means an entity included on a list that the Federal Acquisition Security Council (FASC) develops and maintains and publishes in the System for Award Management (SAM) at https://www.sam.gov (section 1822 of Pub. L. 118-31, 41 U.S.C. 3901 note prec.).
Backhaul means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network (e.g., connecting cell phones/towers to the core telephone network). Backhaul can be wireless (e.g., microwave) or wired (e.g., fiber optic, coaxial cable, Ethernet).
Covered application means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or an entity owned by ByteDance Limited.
Covered article, as defined in 41 U.S.C. 4713(k), means:
https://www.sam.gov/
(1) Information technology, as defined in 40 U.S.C. 11101, including cloud computing services of all types;
(2) Telecommunications equipment or telecommunications service, as those terms are defined in section 3 of the Communications Act of 1934 (47 U.S.C. 153);
(3) The processing of information on a Federal or non-Federal information system, subject to the requirements of the Controlled Unclassified Information program (see 32 CFR part 2002);
or
(4) Hardware, systems, devices, software, or services that include embedded or incidental information technology.
Covered foreign country means The People’s Republic of China.
Covered telecommunications equipment or services means—
(1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities);
(2) For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities);
(3) Telecommunications or video surveillance services provided by such entities or using such equipment; or
(4) Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country.
Critical technology means—
(1) Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations;
(2) Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled—
(i) Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, nuclear nonproliferation, or missile technology; or
(ii) For reasons relating to regional stability or surreptitious listening;
(3) Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities);
(4) Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of nuclear equipment and material);
(5) Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title 42 of such Code; or
(6) Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. 4817).
FASC-prohibited unmanned aircraft system means an unmanned aircraft system manufactured or assembled by an American Security Drone Act—covered foreign entity.
FASCSA order means any of the following orders issued under the Federal Acquisition Supply Chain Security Act (FASCSA) requiring removing covered articles from executive agency information systems or excluding one or more named sources or named covered articles from executive agency procurement actions, as described in 41 CFR 201-1.303(d) and (e):
(1) The Secretary of Homeland Security may issue FASCSA orders that apply to civilian agencies, to the extent not covered by paragraph (2) or (3) of this definition. This type of FASCSA order may be referred to as a Department of Homeland Security (DHS) FASCSA order.
(2) The Secretary of Defense may issue FASCSA orders that apply to the Department of Defense (DoD) and national security systems other than sensitive compartmented information systems. This type of FASCSA order may be referred to as a DoD FASCSA order.
(3) The Director of National Intelligence (DNI) may issue FASCSA orders that apply to the intelligence community and sensitive compartmented information systems, to the extent not covered by paragraph (2) of this definition. This type of FASCSA order may be referred to as a DNI FASCSA order.
Information technology, as defined in 40 U.S.C. 11101(6)—
(1) Means any equipment or interconnected system or subsystem of equipment, used in the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information by the executive agency, if the equipment is used by the executive agency directly or is used by a contractor under a contract with the executive agency that requires the use—
(i) Of that equipment; or
(ii) Of that equipment to a significant extent in the performance of a service or the furnishing of a product;
(2) Includes computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary for security and surveillance), peripheral equipment designed to be controlled by the central processing unit of a computer, software, firmware and similar procedures, services (including support services), and related resources; but
(3) Does not include any equipment acquired by a Federal contractor incidental to a Federal contract.
Intelligence community, as defined by 50 U.S.C. 3003(4), means the following—
(1) The Office of the Director of National Intelligence;
(2) The Central Intelligence Agency;
(3) The National Security Agency;
(4) The Defense Intelligence Agency;
(5) The National Geospatial-Intelligence Agency;
(6) The National Reconnaissance Office;
(7) Other offices within the Department of Defense for the collection of specialized national intelligence through reconnaissance programs;
(8) The intelligence elements of the Army, the Navy, the Air Force, the Marine Corps, the Coast Guard, the Federal Bureau of Investigation, the Drug Enforcement Administration, and the Department of Energy;
(9) The Bureau of Intelligence and Research of the Department of State;
(10) The Office of Intelligence and Analysis of the Department of the Treasury;
(11) The Office of Intelligence and Analysis of the Department of Homeland Security; or
(12) Such other elements of any department or agency as may be designated by the President, or designated jointly by the Director of National Intelligence and the head of the department or agency concerned, as an element of the intelligence community.
Interconnection arrangements means arrangements governing the physical connection of two or more networks to allow the use of another’s network to hand off traffic where it is ultimately delivered (e.g., connecting a customer of telephone provider A to a customer of telephone company B) or sharing data and other information resources.
Kaspersky Lab-covered article means any hardware, software, or service that—
(1) Is developed or provided by a Kaspersky Lab-covered entity;
(2) Includes any hardware, software, or service developed or provided in whole or in part by a Kaspersky Lab-covered entity; or
(3) Contains components using any hardware or software developed in whole or in part by a Kaspersky Lab-covered entity.
Kaspersky Lab-covered entity means—
(1) Kaspersky Lab;
(2) Any successor entity to Kaspersky Lab, including any change in name, e.g., “Kaspersky”;
(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab;
or
(4) Any entity of which Kaspersky Lab has a majority ownership.
National security system, as defined in 44 U.S.C. 3552, means any information system (including any telecommunications system) used or operated by an agency or by a contractor of an agency, or other organization on behalf of an agency—
(1) The function, operation, or use of which involves intelligence activities; involves cryptologic activities related to national security; involves command and control of military forces; involves equipment that is an integral part of a weapon or weapons system; or is critical to the direct fulfillment of military or intelligence missions, but does not include a system that is to be used for routine administrative and business applications (including payroll, finance, logistics, and personnel management applications); or
(2) Is protected at all times by procedures established for information that have been specifically authorized under criteria established by an Executive order or an Act of Congress to be kept classified in the interest of national defense or foreign policy.
Roaming means cellular communications services (e.g., voice, video, data) received from a visited network when unable to connect to the facilities of the home network either because signal coverage is too weak or because traffic is too high.
Sensitive compartmented information means classified information concerning or derived from intelligence sources, methods, or analytical processes, which is required to be handled within formal access control systems established by the Director of National Intelligence.
Sensitive compartmented information system means a national security system authorized to process or store sensitive compartmented information.
Source means a non-Federal supplier, or potential supplier, of products or services, at any tier.
Subsidiary means an entity in which more than 50 percent of the entity is owned directly by a parent corporation or through another subsidiary of a parent corporation.
Substantial or essential component means any component necessary for the proper function or performance of a piece of equipment, system, or service.
Unmanned aircraft means an aircraft that is operated without the possibility of direct human intervention from within or on the aircraft (49 U.S.C. 44801(11)).
Unmanned aircraft system means an unmanned aircraft and associated elements (including communication links and the components that control the unmanned aircraft) that are required for the operator to operate safely and efficiently in the national airspace system (49 U.S.C. 44801(12)).
(b) Prohibitions on providing or using specific products or services in performance of contract. Unless a waiver or exception applies, the Contractor is prohibited from providing any products or services to the Government or using in the performance of the contract any of the following:
(1) A covered application on any information technology owned or managed by the Government, or on any information technology used or provided by the Contractor under this contract, including equipment provided by the Contractor’s employees (section 102 of Division R of the Consolidated Appropriations Act, 2023 (Pub. L. 117-328));
(2) A Kaspersky Lab-covered article (Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91));
(3) Covered telecommunications equipment or services used as a substantial or essential component of any system, or as critical technology as part of any system (paragraphs (a)(1)(A) of section 889 of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232)). This does not prohibit contractors from providing—
(i) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or
(ii) Telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.
(c) Prohibition on unmanned aircraft systems manufactured or assembled by American Security Drone Act—covered foreign entities.
(1) Prohibition. The Contractor is prohibited from—
(i) Delivering any FASC-prohibited unmanned aircraft system, which includes unmanned aircraft (i.e., drones) and associated elements (sections 1823 and 1826 of American Security Drone Act of 2023, within the National Defense Authorization Act for Fiscal Year 2024, Pub.
L. 118-31, Div. A, Title XVIII, Subtitle B, 41 U.S.C. 3901 note prec.);
(ii) On or after December 22, 2025, operating a FASC-prohibited unmanned aircraft system in the performance of the contract (section 1824 of Pub. L. 118-31); and
(iii) On or after December 22, 2025, using Federal funds to procure or operate a FASC-prohibited unmanned aircraft system (section 1825 of Pub. L. 118-31).
(2) Procedures. The Contractor shall search SAM for the FASC-maintained list of American Security Drone Act—covered foreign entities before proposing, or using in performance of the contract, any unmanned aircraft system. Also, the Contractor shall ensure any effort or expenditure associated with a FASC-prohibited unmanned aircraft system is consistent with a corresponding exemption, exception, or waiver determination expressly stated in the contract.
(3) Exemptions, exceptions, and waivers. The prohibitions in paragraph (c) of this clause do not apply where the agency has determined an exemption, exception, or waiver applies, and the contract indicates that such a determination has been made. See sections 1823 through 1825 and 1832 of Public Law 118-31 for statutory requirements pertaining to exemptions, exceptions, and waivers.
(d) Prohibition on using or providing specific products or services or conducting certain transactions regardless of connection to contract.
(1) Certain telecommunications and video surveillance equipment, systems, or services.
(i) Unless an applicable waiver has been issued by the Government, the Contractor cannot use any equipment, systems, or services that uses covered telecommunications equipment or services as a substantial or essential component…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .