S02 Detroit Pressure Washer - Questions and Answers.xlsx
XLSX spreadsheet 11 KB Posted
- Attached to
- 3695--Pressure Washer Trailer and Equipment
- Solicitation number
- 36C10D25Q0049
- Issued by
-
Department of Veterans Affairs
About this file
This is a Questions and Answers document for a pressure washer trailer procurement for the Department of Veterans Affairs. The Q&A clarifies technical specifications including a 200-foot jetter hose, three-inch drop hitch requirement, treated wood floor with polyurethane coating and removable tailgate. The unit will be equipped with a 24 HP Honda engine, TSF2421 pump with V seals, 12-volt Beckett burner, and Summit SM-18 hose reels. The trailer is designed for both pressure washing and jetting capabilities, with a temperature rating of 130-150 degrees Fahrenheit heat rise.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 36C10D25Q0049 0002.docx | DOCX document | |
| 36C10D25Q0049 0001.docx | DOCX document | |
| zzS02 - 6500.6 Appendix C.pdf | ||
| Pressure Washer Trailer Specifications.pdf | ||
| 36C10D25Q0049.docx | DOCX document | |
| S02 Detroit Pressure Washer - Q A.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| # | Question | Answer |
| 1 | How much jetter hose are you wanting? | 200 ft |
| 2 | Receiver for truck - do you have a certain truck that needs the receiver under it or is this for the ball and a drop hitch needed? If so, what size drop on the hitch is needed so all four trailer tires can evenly be on the ground? | It needs to be a three inch drop hitch with his truck to haul the trailer. |
| 3 | Is this a Jetter trailer or a pressure washer trailer? | This trailer will be built to do both. Pressure washing & jetting |
| 4 | What type of trailer bed (e.g., wood plank) and tailgate are required? | The bed of the trailer is a treated wood floor, sprayed with polyurethane coating. The tailgate is removable. |
| 5 | What GPM (gallons per minute) and PSI (pressure) are needed? A 24 HP Honda engine supports multiple configurations, and based on the spray tip itemization, the pump may need to be 8 GPM. | he pump is a TSF2421 |
| 6 | General Pump does not use "U Seals." The pump selection depends on the required specifications. | The pump is a V SEAL. |
| 7 | Is the Beckett burner 12V or 115V? | The Beckett burner is 12volt |
| 8 | What are the size and capacity of the Summit hose reels? | The Summit hose reels are 18' -SM-18 |
| 9 | Could you confirm the temperature rating? | The temperature rating is The unit is rated for a heat rise of 130–150° Fah |
File details come from the government source that posted it. Updated .