352CD37D-7DC9-45AE-84F7-4CF7E6B5C87F.pdf
PDF 124 KB Posted
- Solicitation number
- RFQ033853
- Issued by
- Franklin County, Ohio
About this file
This is a technical data sheet for Crack Magic, a 100% acrylic elastomeric crack sealant product, related to a contract opportunity issued by the Columbus Recreation and Parks Department for crack sealing, painting, and striping services at the basketball court located at Independence Village Park in Reynoldsburg, Ohio. The Crack Magic product is specifically designed for filling cracks up to 1/2" wide in asphalt and concrete pavement surfaces, with typical coverage of approximately 75-150 linear feet per gallon. The product is available in one-gallon pails in multiple colors including green, red, and neutral. The contract opportunity requires all work to be completed by December 31, 2026, with questions due by Friday, October 16, and bid submissions required by Tuesday, October 20 at 1:00 p.m. directed to Mike Musser at mrmuser@columbus.gov.
Crack Magic is a ready-to-use, water-based product weighing approximately 8.8 pounds per gallon with non-volatile content of approximately 61% and contains less than 50 grams per liter of volatile organic compounds, making it environmentally friendly and non-hazardous. The product meets material requirements per ASTM C661, ASTM C719, ASTM C793, ASTM C794, and ASTM D4758 standards. Critical application requirements include minimum surface and ambient temperatures of 50°F during application and for 24 hours following application, with prohibition against application when rain is imminent or forecast. The manufacturer, ThorWorks Industries, Inc., warrants only that the material conforms to product specifications, with liability limited to the replacement value of the product only, and disclaims liability for defects or variations in the substructure over which products are installed.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 635B25B2-DC8D-4F85-96CA-3D1DA29AEB6D.pdf | ||
| 61DD10FE-5F1B-4524-ACBB-AEC691F1A73E.docx | DOCX document | |
| DEDB70CA-3C04-4B37-BFA8-ECFA4504AA9D.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PRODUCT DESCRIPTION & BENEFITS
Crack Magic is a 100% acrylic elastomeric crack sealant designed for sealing cracks in asphalt and concrete pavement sport surfaces. It provides a protective barrier against moisture intrusion into pavement surfaces. Crack Magic is both economical and easy to use.
USES
Crack Magic is designed for filling cracks up to 1/2” wide in asphalt or concrete pavement. Ideal for use in concrete expansion joints.
COMPOSITION
Crack Magic is a 100% acrylic elastomeric crack sealant fortified with fibers and select mineral fillers.
SIZES
Crack Magic is available in one-gallon pails.
COLOR
Available in green, red, and neutral colors.
Chemical & Physical Analysis
Classification. 100% Acrylic Emulsion
Weight per gallon @ 77°F Approx. 8.8 ± .5 lbs.
Color Dark Gray to Black when dry
Non-Volatiles (%) Approx. 61 ± 5%
Drying Time Dependant upon filler depth
Adhesion & Resistance to Water Non Penetration or Loss of Adhesion
Resistant to Heat No Blistering or Sagging
Flexibility No Cracking or Flaking
Resistance to Impact. No Chipping, Flaking, or Cracking
Effects of Accelerated Weathering PASSES
LIMITATIONS
Crack Magic shall not be applied when temperature is expected to drop below 50°F at any time within a 24 hour period immediately following application.
TECHNICAL DATA
Environmental Considerations: Crack Magic is a non-hazardous environmentally friendly waterbased crack sealant containing less than 50 grams per liter volatile organic content (VOC).
PHYSICAL/CHEMICAL PROPERTIES
Crack Magic meets the following material requirements when tested in accordance with ASTM C661, ASTM C719, ASTM C793, ASTM C794, ASTM D4758. (See chart).
INSTALLATION
Cracks must be cleaned of all dirt, debris, and vegetation prior to application of crack sealant.
METHODS
One Gallon Pails: Apply crack sealant with putty knife or trowel.
MIXING PROCEDURES
Crack Magic is a ready-to-use product. Do not dilute.
Neutral Crack Magic can be tinted with ColorPlus pigment dispersion to achieve additional colors.
APPLICATION
Fill cracks completely with crack sealant. Smooth flush to adjoining pavement with putty knife or trowel. Feather edges for smooth transition to playing surface. Allow material to dry before opening to play or applying acrylic sport coatings.
IMPORTANT
Surface and air temperatures must be above 50°F (10°C) during application and for at least 24 hours after application. Stir before using. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use.
ESTIMATING MATERIAL REQUIREMENTS
Coverage is dependent upon depth and width of cracks. Typically, one gallon of Crack Magic will fill approximately 75-150 feet of cracks.
PRECAUTIONS
Both surface and ambient temperature shall be a minimum of 50°F. Temperature shall not drop below 50°F within a 24 hour period following application.
TECHNICAL SERVICES
Manufacturer: Complete product specifications, material safety data sheets, and technical assistance is available from the manufacturer.
Professional Applicators: Your local applicator is available to provide on-site inspections and recommendations to meet your specific needs.
CAUTIONS
Do not store in direct sunlight or where temperatures exceed 100°F. Do not apply if rain is imminent or
REVISED 12/19
Technical Data Sheet
CRACK MAGIC CMT-9
forecast. Keep from freezing. Close container when not in use. Refer to product Safety Data Sheet (SDS) for additional safety information and precautions.
WARRANTY
The statements made on this technical bulletin are believed to be true and accurate, and are intended to provide a guide for approved construction practices.
Manufacturer does not make, nor does it authorize any agent or representative to make any warranty, express or implied, concerning this material as workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. In no event shall Manufacturer be liable for any injury, loss or damage, either direct or incidental, special or consequential, however arising, in connection with material or equipment furnished or work performed. Manufacturer shall not, in any manner, be liable for any defects, variations or change in condition in the substructure over which its products are installed.
Copyright© 2019, SportMaster All rights reserved.
ThorWorks Industries, Inc.
P.O. Box 2277 Sandusky, OH 44870
Phone: 1-800-326-1994
FAX: 1-419-626-5477
www.sportmaster.net
REVISED 12/19
Technical Data Sheet
CRACK MAGIC CMT-9
File details come from the government source that posted it. Updated .