32-12-6638_-_DWG_PKG-Rev-0_Pages_1-53.pdf
PDF 4 MB Posted
- Solicitation number
- 32-12-6638
- Issued by
- Sacramento County, San Francisco City, California
About this file
This document is a comprehensive technical drawing set for a Landscape 3-Axle Roll-Off Lift Frame and Ancillary Components, prepared by Caltrans (California Department of Transportation). The technical drawings detail the design specifications for a 10-yard roll-off dump body system, including multiple sub-assemblies such as the lift frame, hinge assembly, top assembly, weldment, and various mechanical components. The drawings provide precise engineering specifications, including detailed views, isometric perspectives, exploded assembly diagrams, and quality assurance inspection sheets for critical components like locks, hoops, and trunnion mounts.
The technical documentation includes comprehensive manufacturing instructions, with specific requirements for material selection, welding procedures, surface preparation, and quality control. The drawings specify materials such as A36 hot-rolled steel, structural steel, and stainless steel, with precise dimensional tolerances and manufacturing notes. Each component is assigned a unique Caltrans CAD model number, and the documentation includes detailed instructions for fabrication, assembly, welding, and finishing, with emphasis on maintaining strict geometric tolerances, surface quality, and mechanical functionality of the roll-off lift frame system.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 32-12-6638-Solicitation_Pkg.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TABLE OF CONTENTS
PE 6638, Landscape 3-Axle Roll-O Li Frame and Ancillary Components Pg 1-53 076063 REV A, 10 Yard Lift-frame – Landscape Main-Components Sub-Assembly 08-001171 REV A, 10 YD Roll-Off Dump Body Hinge Assembly 120172 - Landscape Liftframe REV A, Landscape 3-Axle Roll-Off Liftframe Top Assembly 120185 – Landscape Liftframe REV H, Landscape Roll-Off Lift-Frame Weldment 120186 - LLQAI, Landscape Liftframe QA Inspection Sheet for Locks/Hooks and Trunnion Mount 08-001126 REV A, 10 YD Dump, Roll-Off Hoist-Base & Safety Legs Assembly
UNLESS OTHERWISE SPECIFIED:
REMOVE ALL BURRS AND SHARP EDGES. ALL METAL PARTS SHALL BE 1.
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE6.
SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE
THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE
UNIFORM AND NEAT IN APPEARANCE IN ACCORDANCE WITH
INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND7.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
PRODUCTION.
MATERIAL
INTERPRET GEOMETRIC
STATE OF CALIFORNIA
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
R E V
Manuel Herrera
DIVISION OF EQUIPMENT
F
E
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:24
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
10 YARD LIFT-FRAME - LANDSCAPE
076063
DESIGNER
DEPARTMENT OF TRANSPORTATION
4090.52 LBS
EQUIPMENT, OFFICE OF ENGINEERING AND
A
N O N E
D
FINISH
MAIN-COMPONENTS SUB-
DRAWN
BILL OF MATERIALS
.03" CONFIDENTIAL AND PROPRIETARY
.005"
ASSEMBLY
TWO PLACE DECIMAL
ANSI Y14.5-2009TOLERANCING PER:
THREE PLACE DECIMAL
WEIGHT
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
© COPYRIGHT 2018 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
Meta Data =
07/13/2022
REV. DESCRIPTION DATE APPROVED
REVISIONS
A UPDATED B.O.M. AND DRAWING NUMBERS 7/18/2025 JONE OUNKHAM
NONE PRELIMINARY 02/24/2022 MANUEL HERRERA
ITEM
NO.
QTY. DESCRIPTION SUPPLIER/MFG PART
NO.
CALTRANS PART
NO.
1 1 HINGE ASSEMBLY, 10 YD ROLL-OFF DUMP BODY
08-001171 (CT STK #
684-5015)
2 1 LANDSCAPE ROLL-OFF LIFT FRAME ASSEMBLY 120172 (CT STK #
684-4000 )
3 1
WINCH, LIFT-SAFE® SERIES LS16K, GEAR RATIO =
25:1, GALVANIZED DRUM, HYDRAULIC PARTS
CLOCKED PER BLOOM DWG# 6544
BLOOM MFG MODEL
# LS16K-18.6M-S145-
RH-25-GALV-6544
CT STK # 688-1380
4 1 HOIST-MOUNT AND SAFETY LEG ASSEMBLY, 10 YD
DUMP, ROLL-OFF BODY
08-001126 (CT STK #
051-3517)
5 (12)
SAE FLAT WASHER, 5/8" SCREW SIZE, 0.656" ID,
1.312" OD, THICKNESS = 0.074"-0.121", STEEL,
GRADE 8, ZINC YELLOW-CHROMATE PLATED
McMASTER-CARR
PART # 98023A035
6 (6) 5/8-11 GRADE 8 HSS NYLON-INSERT LOCKNUT McMASTER-CARR 97135A270
7 (4) HEX HEAD CAP SCREW, 5/8"-11 UNC-2A x 3-3/4"
LONG, PARTIALLY THREADED, ALLOY STEEL, GRADE
8, ZINC YELLOW-CHROMATE PLATED
8 (2) HEX HEAD CAP SCREW, 5/8"-11 UNC-2A x 3-1/2"
LONG, PARTIALLY THREADED, ALLOY STEEL, GRADE
8, ZINC YELLOW-CHROMATE PLATED
9 REF
G3 TELESCOPIC CYLINDER, 150-1/4" STROKE, SAE-
16 PORT, STAGE-1 WITH 5.793" EFFECTIVE DIA., 472
LBS WEIGHT WITHOUT OIL, 2,750 PSI WORKING
PRESSURE, 13.8 GAL. HYDRAULIC FLUID VOLUME,
4O GPM MAX PUMP FLOW
MAILHOT MODEL #
G3 150-5.7-4 - PART #
PG0571504VM0148
065-4611
NOT INCLUDED IN
CT STK # 684-4005
SEE DRAWING 08-001171
SEE DRAWING 120172
SEE DRAWING 08-001126
(12) REF
(6) REF6
SUB-ASSEMBLY OF 10 YARD LIFT-FRAME COMPONENTS
CALTRANS STOCK # 684-4005 IS TO BE SUPPLIED WITHOUT TELESCOPING CYLINDER (ITEM 9), AND WITHOUT WINCH MOUNTING HARDWARE
SCALE 1 : 8
CALTRANS CAD MODEL # 076063 (CT STK # 684-4005)
(4)X7
(2) REF8
9 REF
PE 6638 REV 0 Page 1 of 53
REMOVE ALL BURRS AND SHARP EDGES. ALL METAL PARTS SHALL BE 1.
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS FROM3.
METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL BE CLEAN,
AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING TO
AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE, WARPING,
AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE SPECIFIED.6.
SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE THICKNESS OF THE
THINNER OF THE ADJOINING PARTS. WELDS TO BE UNIFORM AND NEAT
IN APPEARANCE IN ACCORDANCE WITH INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND SEAMS7.
NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV RESISTANT,
WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
MANUFACTURER SHALL AFFIX PERMANENT-ADHESIVE-BACK LABEL,
OR METAL STAMP WITH THE FOLLOWING INFORMATION:
MANUFACTURER ____________
SERIAL NUMBER __________
PE NUMBER (formatted as PE 32-12-YYYY or PE YYYY)
LABELS MAY BE PERMANENTLY FASTENED IN LIEU OF ADHESIVE-BOND.
9. ZINC PLATE INDICATED ITEMS (AFTER WELDING), PER ASTM B633 TYPE II
(YELLOW ZINC CHROMATE, SERVICE CONDITION (SC) 3 (0.0005 IN MIN).
DO NOT PAINT ITEMS AFTER ZINC PLATING.
Manuel Herrera
BILL OF MATERIALS
STATE OF CALIFORNIA
HINGE ASSEMBLY
DIVISION OF EQUIPMENT
D
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
A
-0
UNLESS OTHERWISE SPECIFIED:
SHEET 1 OF 8
R E V
SCALE: 1:4
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
10 YD ROLL-OFF DUMP BODY
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
ENG APPR.
CONFIDENTIAL AND PROPRIETARY
DESIGNER
.005"
.03"
ANSI Y14.5-2009
DEPARTMENT OF TRANSPORTATION
WEIGHT 278.99 LBS
08-001171
INTERPRET GEOMETRIC
MATERIAL
FINISH
TOLERANCING PER:
DRAWN
TWO PLACE DECIMAL
THREE PLACE DECIMAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
Meta Data =
REV. DESCRIPTION DATE APPROVED
REVISIONS
A UPDATED TOLERANCES, REVISED ITEMS FOR EASE OF MANUFACTURING 10/31/2024 JONE OUNKHAM
ADDED 'DO NOT PRIMER, PAINT, OR GREASE... ASSEMBLY BEFORE SHIPPING' NOTE ON
SHEET 1. ADDED NOTE # 9 (ZINC PLATING) TO ITEM 11 (SEE SHEETS 1, 2, & 5).
12/27/2022 RAUL VALDEZ
5 ADDED NOTE TO ZINC PLATE ITEMS 5, 6, 7, AND 10 06/10/2021 JONE OUNKHAM
4 ADDED CALTRANS STOCK # 071-2934 TO ITEM 10 1/11/2021 Manuel Herrera
PIN WELDMENT 08-001176 ALTERED - MODIFIED PIN 08-001178 IN ORDER TO WELD ON
BOTH SIDES OF STOP 08-001177
12/02/2020 Manuel Herrera
ADDED FLAGGED NOTE 8, AND ADDED VIEW TO REFERENCE LOCATION OF
MANUFACTURER LABEL/MARKING
9/23/2020 Manuel Herrera
1 FABRICATION IMPROVEMENTS TO ITEMS 7 & 10 01/14/2019 Manuel Herrera
ITEM
NO.
Default/QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS PART
STOCK # / CAD #
1 1
WELDED ASSEMBLY, ITEM 1, C/O ITEMS 08-
001173, 08-001175, AND 08-001181
08-001172
2 2
4” THK A36 STEEL PLATE, HOT ROLLED,
STRUCTURAL QUALITY PER ASTM A36
08-001179
3 2
GREASE FITTING, STRAIGHT: 1/8 PTF MALE; ZINC-
PLATED STEEL; 11/16" OVERALL LENGTH
McMASTER-
CARR PART #
1095K11, OR
EQUIVALENT
4 2
ZERK GREASE FITTING, 1/8 NPTF (DRYSEAL) MALE
x 45 DEGREE ELBOW, ZINC-PLATED STEEL
McMASTER-
CARR PART #
1095K23
5 2
6” DIA. ROUND, HOT ROLLED, MEDIUM CARBON
1144 STEEL PER ASTM A576
08-001180
6 1
5” DIA. ROUND, HOT ROLLED, MEDIUM CARBON
1144 STEEL PER ASTM A576
08-001182
7 2
WELDED ASSEMBLY, ITEM 7, C/O ITEMS 08-
001184 AND 08-001185
08-001183
8 2 HEX HEAD CAP SCREW, 1/2"-13 UNC-2A x 1"
LONG, FULLY THREADED, ALLOY STEEL, GRADE 8,
ZINC YELLOW-CHROMATE PLATED
9 2
SPLIT LOCK WASHER FOR 1/2" SCREW SIZE, 0.512"
ID, 0.869" OD, 0.125" THICKNESS, STEEL, GRADE 8,
ZINC YELLOW-CHROMATE PLATED
10 2
PIN WELDMENT C/O ITEMS 08-001177 AND 08-
001178
08-001176
(CALTRANS STOCK
# 071-2934)
11 2
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL
HOT ROLLED, PICKLED & OILED PER ASTM A36
08-001174
SEE SHT 3
SEE SHT 3
SEE SHT 4
SEE SHT 5
SEE SHT 6
C T S
TK
-5
ITEM
NO.
Default/QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS PART
STOCK # / CAD #
12 2
LOCKNUT, NYLON-INSERT, 3/8"-16 UNC-2B, HIGH-
STRENGTH STEEL, GRADE 8, ZINC YELLOW-
CHROMATE
McMASTER 97135A230
13 2 HEX HEAD CAP SCREW, 3-8"-16 UNC x 1-3/4" L
ALLOY STEEL, GRADE 8, ZINC YELLOW PLTD
906-8318
14 4
SAE WASHER, 3/8" SCREW SIZE, 0.812" OD,
GRADE 8, ZINC YELLOW-CHROMATE PLATED
DO NOT PRIMER, PAINT, OR GREASE ANY ITEMS.
ZINC PLATING IS STILL REQUIRED PER NOTE # 9.
VENDOR TO ASSEMBLE BEFORE SHIPPING.
SCALE 1 : 1
2 PLACES
DETAIL B
REF
2X 4
2X
2X 9
1 REF
SCALE 1 : 2
CALTRANS CAD MODEL # 08-001171 (CT STK # 684-5015)
TOP ASSEMBLY
REF
2 2
MM
7 6
122X
SCALE 1 : 1
2 PLACES
DETAIL A
2X 11
REF1
2X 13
144X
REF 1
SCALE 1 : 2
180.0°
VIEW M-M
PE 6638 REV 0 Page 2 of 53
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
-0
D
SHEET 2 OF 8
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:8
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER: ANSI Y14.5-2009
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
TWO PLACE DECIMAL .03"
THREE PLACE DECIMAL .005"
CONFIDENTIAL AND PROPRIETARY
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
278.99 LBS
11/6/2024
HINGE ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
10 YD ROLL-OFF DUMP BODY
08-001171
WEIGHT
Meta Data =
REV. DESCRIPTION DATE APPROVED
REVISIONS
6 ADDED NOTE # 9 (ZINC PLATING) TO ITEM 11. 12/27/2022 RAUL VALDEZ
144X
SCALE 7 : 16
CALTRANS CAD MODEL # 08-001171 (CT STK # 684-5015)
ASSEMBLY EXPLODED VIEW - SHOWN FOR REF ONLY
REF 1
REF5
REF2
REF6
REF2
REF5
REF10
REF
REF3
2 REF7
2 REF4
2 REF
2 REF9
2 REF 13
2 REF11
REF
12 2X
PE 6638 REV 0 Page 3 of 53
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
-0
D
SHEET 3 OF 8
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
278.99 LBS
11/6/2024
HINGE ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
10 YD ROLL-OFF DUMP BODY
08-001171
WEIGHT
Meta Data =
REF
SCALE 1:1
CALTRANS CAD MODEL # 08-001179
ITEM 2
J
16"
THRU TO
HOLE CENTER
1132" 8"
1/8 NPT
716" X 90°, NEAR SIDE
16"
4" STK
412"
2X 14" X 45.0°
2"
238"
4"
REF
4"
REF
C
C
9 ITEM 5 - ISOMETRIC VIEW
SHOWN FOR REF ONLY
SCALE 1:1
ITEM 2 - BOTTOM PERSPECTIVE VIEW
SHOWN FOR REF ONLY
SCALE 1:1
.005 M A B
B
2.031 .031 .000
6" 2"
REF
SCALE 1:1
CALTRANS CAD MODEL # 08-001180
ITEM 5
5 REF
A 4"
2X R14"
6"
SECTION C-C
K
K LJ.005 M
L
58"
16"
2.005 .005 .000
2.375
HOLE CENTER
AND OUTSIDE
RADIUS CENTER
1"
178"
R218"
OUTSIDE
RADIUS
712"
142.7°
REF
2.000
HOLE CENTER
218"
OUTSIDE
RADIUS
CENTER
414"
5"
31516"
RADIUS ENDS
11516"
PE 6638 REV 0 Page 4 of 53
1"
12"
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
-0
D
SHEET 4 OF 8
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
278.99 LBS
11/6/2024
HINGE ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
10 YD ROLL-OFF DUMP BODY
08-001171
WEIGHT
Meta Data =
ITEM
NO.
QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS PART
STOCK # / CAD #
101 1
1" DIA ROUND BAR, 1018 STEEL COLD DRAWN,
TURNED & POLISHED PER ASTM A108
08-001185
102 1
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001184
SCALE 1 : 1
CALTRANS CAD MODEL # 08-001183
ITEM 7 - ISOMETRIC VIEW
H
SCALE 1.5 : 1
SECTION F-F
DO NOT WELD THIS SIDE
H.010
.015 G
1/8"
DO NOT PLUG NPT HOLE
TIE ENDS
1"
116"
178"
P
SCALE 1.5 : 1
CALTRANS CAD MODEL # 08-001185
ITEM 101
.005
.005 N
N
1" STK
16"
THRU
1132" 8"
1/8 NPT
716" X 90°, NEAR SIDE
8"
G
G
SCALE 1 : 1
SHOWN FOR REF ONLY
ITEM 6 - ISOMETRIC VIEW
- E
SCALE 1 : 1
CALTRANS CAD MODEL # 08-001182
ITEM 6
C D.005 M
D
2X 5" STK
2X 1.031 .031
.000 1.13 MIN.
D
D
SCALE 1 : 1
CL
CL
SECTION D-D
C
E
2X 14"
2X 414" R2"
R 4"
9"
412"
R 2"
212"
DETAIL E
2 PLACES
SCALE 2 : 1
118"
120.0°
1.031
45.0°
16"
CHAMFER
516"
102 REF
G
32"
F
F
SECTION G-GP
8"
18"
2"
18" 18"
8"
16"
18"
1"
REF102
ITEM 102
CALTRANS CAD MODEL # 08-001184
SCALE 1.5 : 1
2"
2X 1"
234"
114"
16"
32"
R1"
R1"
14" STK
PE 6638 REV 0 Page 5 of 53
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
-0
D
SHEET 5 OF 8
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
278.99 LBS
11/6/2024
HINGE ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
10 YD ROLL-OFF DUMP BODY
08-001171
WEIGHT
Meta Data =
ITEM
NO.
QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS PART
STOCK # / CAD #
201 1
2” DIA ROUND BAR, 1018 STEEL COLD DRAWN,
TURNED & POLISHED PER ASTM A108
08-001178
202 1
3/8" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001177
203 1
GREASE FITTING, STRAIGHT: 1/8 PTF MALE; ZINC-
PLATED STEEL; 11/16" OVERALL LENGTH
McMASTER-
CARR PART #
1095K11, OR
EQUIVALENT
C T S
TK
-2
REV. DESCRIPTION DATE APPROVED
REVISIONS
6 ADDED NOTE # 9 (ZINC PLATING) TO ITEM 11. 12/27/2022 RAUL VALDEZ
U
SCALE 1 : 1
CALTRANS CAD MODEL # 08-001178
ITEM 201
.005
.005 T
T
2" STK
1132" 3 2"
1/8 NPT
716" X 90°, NEAR SIDE
112"
J
J
202 REF
R
11732"
H
H
202 REF
38"
41516"
REF
SCALE 1 : 1
SECTION J-J
U
12" 45.0°
32"
212" 12"
12"
312"
16" THRU 14"
2" 1 2"
SCALE 1 : 1.5
CALTRANS CAD MODEL # 08-001176 (CALTRANS STOCK # 071-2934)
ITEM 10
ITEM 202
CALTRANS CAD MODEL # 08-001177
SCALE 1 : 1
11732"
112"
3716"
R114" R114"
3"
112"
ITEM 11
CALTRANS CAD MODEL # 08-001174
SCALE 1 : 1
112"
12"
32"
3"
1"
R18"
4 PLACES
DO NOT PLUG
NPT HOLE,
S
SCALE 1 : 1.5
SECTION H-H
TIE ENDS
REF202 REF
WELDING OF ASSEMBLY
INSTALL GREASE ZERKS AFTER
.015 S S
.020 R1/8"
2"
18"
1112"
12" STK
SHOWN FOR REF ONLY
ITEM 11 - ISOMETRIC VIEW
SCALE 1 : 1
REF
PE 6638 REV 0 Page 6 of 53
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
-0
D
SHEET 6 OF 8
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:4
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
278.99 LBS
11/6/2024
HINGE ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
10 YD ROLL-OFF DUMP BODY
08-001171
WEIGHT
Meta Data =
REV. DESCRIPTION DATE APPROVED
REVISIONS
1 FABRICATION IMPROVEMENTS TO ITEMS 7 & 10 01/14/2019 Manuel Herrera
ITEM
NO.
QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS PART
STOCK # / CAD #
301 1 L6 x 6 x ½” L-ANGLE, STRUCTURAL A36 STEEL PER ASTM A36
08-001175
302 6
¾” THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001173
303 2
1" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001181
NOTE LOCATION OF HOLES ON ITEM 301 &
PLACEMENT OF ITEMS 302 & 303 AS SHOWN
PRIOR TO WELDING
SEE SHT 7
SEE SHT 8
ITEM 1 - ISOMETRIC VIEW
SHOWN FOR REF ONLY
CALTRANS CAD MODEL # 08-001172
SCALE 1 : 2
SCALE 1 : 1.5
DETAIL 6 PLACES
SECTION L-L
REF
REF301
WRAP AROUND
TIE ENDS
( 2132")
ALL SIX HOLES MUST BE CONCENTRIC
WITHIN .010" WITH EACH OTHER
302 302 302 303 303 302 302 302
CL
CL
20516"
918"
4058"
1434"
2X 418" 2X 418"
11716"
6916"
11116"
2X 2916"
32"
11116"
32"
K
K
L
L
SCALE 1 : 1.5
DETAIL 2 PLACES
SECTION K-K
REF
REF303
WRAP AROUND
TIE ENDS
( 1132")
TWO HOLES MUST BE CONCENTRIC
WITHIN .010"
PE 6638 REV 0 Page 7 of 53
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
-0
D
SHEET 7 OF 8
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:4
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
278.99 LBS
11/6/2024
HINGE ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
10 YD ROLL-OFF DUMP BODY
08-001171
WEIGHT
Meta Data =
302 6X REF
SCALE 1 : 2
CALTRANS CAD MODEL # 08-001172
SHOWN FOR REF ONLY
ITEM 1 - EXPLODED VIEW
REF 301
303 2X REF
6" STK
6" STK
12" STK
ITEM 301
CALTRANS CAD MODEL# 08-001175
SCALE 1 : 1.5
301 REF
4058"
12"
4"
32"
12"
32"
4"
PE 6638 REV 0 Page 8 of 53
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
-0
D
SHEET 8 OF 8
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER: ANSI Y14.5-2009
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
TWO PLACE DECIMAL .03"
THREE PLACE DECIMAL .005"
CONFIDENTIAL AND PROPRIETARY
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
278.99 LBS
11/6/2024
HINGE ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
10 YD ROLL-OFF DUMP BODY
08-001171
WEIGHT
Meta Data =
SCALE 1:1
CALTRANS CAD MODEL # 08-001173
ITEM 302
302 REF
.005
.005 V
512"
512"
312"
312"
2.016 .016 .000
R2"
R12"
2X 14" 2X 45.0°
ITEM 303 - ISOMETRIC VIEW
SHOWN FOR REF ONLY
SCALE 1:1
ITEM 302 - ISOMETRIC VIEW
SHOWN FOR REF ONLY
SCALE 1:1
V
2X 14"
2X 45.0°
4" STK
512"
SCALE 1:1
CALTRANS CAD MODEL # 08-001181
ITEM 303
303 REF
.005
.005 W
514"
514"
4"
2X 4"
114"
4X R12"
16" THRU ALL
1/2-13 UNC - 2B THRU ALL
2" X 90°, NEAR SIDE
2" X 90°, FAR SIDE
1.016 .016 .000
W
1" STK
514"
PE 6638 REV 0 Page 9 of 53
LABELS MAY BE PERMANENTLY FASTENED IN LIEU OF ADHESIVE-BOND.
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS FROM3.
METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL BE CLEAN,
AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING TO
AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE, WARPING,
AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE SPECIFIED. 6.
SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE THICKNESS OF THE
THINNER OF THE ADJOINING PARTS. WELDS TO BE UNIFORM AND NEAT
IN APPEARANCE IN ACCORDANCE WITH INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND SEAMS7.
NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV RESISTANT,
WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
MANUFACTURER SHALL AFFIX PERMANENT-ADHESIVE-BACK LABEL,
OR METAL STAMP WITH THE FOLLOWING INFORMATION:
MANUFACTURER ____________
SERIAL NUMBER __________
PE NUMBER (formatted as PE 32-12-YYYY or PE YYYY)
STATE OF CALIFORNIA
120172 - Landscape
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
Meta Data =
L a n d sc a p e L if tf ra m e
UNLESS OTHERWISE SPECIFIED:
SHEET 1 OF 7
R E V
SCALE: 1:6
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
1178.02 LBS
EQUIPMENT, OFFICE OF ENGINEERING AND
DEPARTMENT OF TRANSPORTATION
FINISH
WEIGHT
Liftframe
INTERPRET GEOMETRIC
DIVISION OF EQUIPMENT
7/10/2025
MATERIAL
.005"
A
BILL OF MATERIALS
TOLERANCING PER:
Manuel Herrera
D
PRODUCTION.
.03"TWO PLACE DECIMAL
THREE PLACE DECIMAL
ANSI Y14.5-2009
© COPYRIGHT 2024 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
LANDSCAPE 3-AXLE ROLL-OFF
LIFTFRAME TOP ASSEMBLY
CALTRANS CAD MODEL # 120172
ISOMETRIC VIEW
REF
WELDMENT 1
3 4X
2 2X
2X
8X8
4X7
12X6
12X5
8X8
8X6
8X5
16X14
32X12
16X13
8X14
12 16X
2X
8X
2X
LANDSCAPE LIFTFRAME - TOP ASSEMBLY
REV. DESCRIPTION DATE APPROVED
REVISIONS
A
UPDATED TOLERANCES
12/05/2024 JONE OUNKHAM
ADDED FLAGGED NOTE 8, AND VIEW SHOWING LOCATION OF MANUFACTURER
LABEL/MARKING
9/23/2020 MANUEL HERRERA
3 TRANSFER FILES TO VAULT 3/4/2019 Manuel Herrera
2 REMOVED WINCH AND MOUNTING HARDWARE FROM DRAWING 9/6/2018 Manuel Herrera
1 PRELIMINARY 09/12/2017 Manuel Herrera
SEE SHT 6
SEE SHT 4 & 5
SEE SHT 4 & 5
SEE SHT 7
SEE SHT 7
SEE SHT 7
SEE SHT 7
C T S
TK
-4
ITEM
NO.
QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS
PART NO.
1 1 WELDMENT, 10 YD ROLL-OFF LIFT FRAME 120185
2 2 3/4" THICK x 5.00" WIDE ULTRA HIGH MOLECULAR
WEIGHT POLYETHYLENE (UHMW PE) BAR, UV STABILIZED
120184
3 4 3/4" THICK x 5.00" WIDE ULTRA HIGH MOLECULAR
WEIGHT POLYETHYLENE (UHMW PE) BAR, UV STABILIZED
120183
4 2
3/8” THICK ULTRA HIGH MOLECULAR WEIGHT
POLYETHYLENE (UHMW PE), UV STABILIZED
120179
5 20
1/4-20 THREAD, LOCKNUT, STAINLESS STEEL WITH NYLON
INSERT
McMASTER-
CARR
90715A125
6 20
FLAT WASHER, 1/4" SCREW SIZE, 0.281" ID, 0.625" OD,
0.043"-0.057" THK, 316 STAINLESS STEEL
McMASTER-
CARR
90107A029
7 4 BUTTON HEAD CAP SCREW, 1/4"-20 UNC-3A x 1-1/8"
LONG, FULLY THREADED, 18-8 STAINLESS STEEL
McMASTER-
CARR PART #
92949A835
8 16 BUTTON HEAD CAP SCREW, 1/4"-20 UNC-3A x 1-1/4"
LONG, 18-8 STAINLESS STEEL
McMASTER-
CARR
92949A544
9 2
LOCKING PIN WITH WIRE RETAINER, SQUARED, 3/8"
DIAMETER, 1-7/8" USABLE LENGTH, ZINC-PLATED STEEL
McMASTER-
CARR PART #
98416A018
10 2
LANYARD COMPRISED OF 1/8" DIA. WIRE ROPE, 7 X 19
STRAND CORE, 18-8 STAINLESS STEEL, AND TWO
STAINLESS STEEL COMPRESSION SLEEVES
McMASTER-
CARR PART #
8908T44 (24"
LONG),
McMASTER-
CARR PART #
3755T15 (2
EACH)
120239
11 2
LANYARD COMPRISED OF 1/8" DIA. WIRE ROPE, 7 X 19
STRAND CORE, 18-8 STAINLESS STEEL, AND TWO
STAINLESS STEEL COMPRESSION SLEEVES
McMASTER-
CARR PART #
8908T44 (24"
LONG),
McMASTER-
CARR PART #
3755T15 (2
EACH)
120242
12 56
FLAT WASHER, SAE, 5/16" SCREW SIZE, 0.344" ID, 0.688"
OD, ALLOY STEEL, GRADE 8, ZINC YELLOW-CHROMATE
PLATED
13 28
HEX LOCKNUT, NYLON-INSERT, 5/16"-18 UNC-2B, 1/2" W,
11/32" H, STEEL, GRADE 8, ZINC YELLOW-CHROMATE
PLATED
14 28 HEX HEAD CAP SCREW, 5/16"-18 UNC-2A x 1-3/8"
LONG, PARTIALLY THREADED, ALLOY STEEL, GRADE 8,
ZINC YELLOW-CHROMATE PLATED
15 2
3/8" THICK UHMW IPX 2000, INTERSTATE PLASTICS UV
STABILIZED
- 120173
16 2 LOCK PIN ASSEMBLY - 120174
SEE DRAWING 120185
2X10
11 2X
SCALE 1:2
DETAIL DE
9 2X
SCALE 1 : 8
PE 6638 REV 0 Page 10 of 53
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
L a n d sc a p e L if tf ra m e
D
SHEET 2 OF 7
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER: ANSI Y14.5-2009
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
TWO PLACE DECIMAL .03"
THREE PLACE DECIMAL .005"
CONFIDENTIAL AND PROPRIETARY
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
1178.02 LBS
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE 3-AXLE ROLL-OFF
LIFTFRAME TOP ASSEMBLY
120172 - Landscape Liftframe
WEIGHT
Meta Data =
WELDMENT
2X
2X 4
16X
20X6
20X5
SCALE 1 : 8
TOP ASSEMBLY - PARTIAL EXPLODED VIEW
DETAIL B
SCALE 3 : 8
2 PLACES
2X
10 2X
2X 11
162X
SCALE 3 : 8
24 PLACES
DETAIL A
28X
28X14
56X
PE 6638 REV 0 Page 11 of 53
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
L a n d sc a p e L if tf ra m e
D
SHEET 3 OF 7
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:24
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER: ANSI Y14.5-2009
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
TWO PLACE DECIMAL .03"
THREE PLACE DECIMAL .005"
CONFIDENTIAL AND PROPRIETARY
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
1178.02 LBS
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE 3-AXLE ROLL-OFF
LIFTFRAME TOP ASSEMBLY
120172 - Landscape Liftframe
WEIGHT
Meta Data =
3 REF
SEE SHT 4
SEE SHT 4
SEE SHT 4
SEE SHT 4
SEE SHT 5
SEE SHT 6SEE SHT 6
Q
L
L
H
H
UU
C
C
G
G
REF
SCALE 1 : 3
SECTION C-C
3 REF
REF3
26"
REF
PLASTIC
TOP OF
SCALE 2 : 5.5
DETAIL DF
19"
REF
SCALE 1.5 : 1
24 PLACES
DETAIL D
138"
8"
REF
4 PLACES AS SHOWN
SCALE 1.5 : 1
DETAIL O
118"
REF
SECTION G-G
SCALE 1 : 3
PE 6638 REV 0 Page 12 of 53
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
L a n d sc a p e L if tf ra m e
D
SHEET 4 OF 7
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:6
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
1178.02 LBS
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE 3-AXLE ROLL-OFF
LIFTFRAME TOP ASSEMBLY
120172 - Landscape Liftframe
WEIGHT
Meta Data =
SCALE 1 : 2
FROM SHT 3
SECTION H-H
SCALE 2 : 1
8 PLACES
DETAIL J
5 6
114"
SCALE 1 : 4
FROM SHT 3
SECTION L-L
9 11
DETAIL M
SCALE 2 : 1
8 PLACES
114"
SCALE 1.5 : 1
2 PLACES
DETAIL T
SECURE ITEM 10 & 11 LANYARDS
TO WELD EYE IN ITEM 1 AS SHOWN,
THEN CRIMP COMPRESSION SLEEVES PER
MANUFACTURER'S INSTRUCTIONS
USING APPROPRIATE COMPRESSION TOOL
PE 6638 REV 0 Page 13 of 53
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
L a n d sc a p e L if tf ra m e
D
SHEET 5 OF 7
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:6
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER: ANSI Y14.5-2009
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
TWO PLACE DECIMAL .03"
THREE PLACE DECIMAL .005"
CONFIDENTIAL AND PROPRIETARY
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
1178.02 LBS
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE 3-AXLE ROLL-OFF
LIFTFRAME TOP ASSEMBLY
120172 - Landscape Liftframe
WEIGHT
Meta Data =
WELDMENT
SCALE 1 : 2
FROM SHT 3
DETAIL Q
REF
SCALE 2 : 1
DETAIL S
SECURE ITEM 10 AS SHOWN WITH
WIRE ROPE, THEN CRIMP COMPRESSION
SLEEVE PER MANUFACTURER'S INSTRUCTIONS
USING APPROPRIATE COMPRESSION TOOL
SCALE 2 : 1
DETAIL R
2 PLACES
SECURE ITEM 11 AS SHOWN WITH WIRE ROPE,
THEN CRIMP COMPRESSION SLEEVE PER
MANUFACTURER'S INSTRUCTIONS
USING APPROPRIATE COMPRESSION TOOL
PE 6638 REV 0 Page 14 of 53
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
L a n d sc a p e L if tf ra m e
D
SHEET 6 OF 7
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:6
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
1178.02 LBS
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE 3-AXLE ROLL-OFF
LIFTFRAME TOP ASSEMBLY
120172 - Landscape Liftframe
WEIGHT
Meta Data =
SCALE 1 : 1
CALTRANS CAD MODEL # 120174
ITEM 16
2 PLACES
TIE ENDS
1/8"
1/8"
ITEM
NO.
QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS PART
STOCK # / CAD #
101 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120177
102 1 1½” x 1½” HOT ROLLED SQUARE, DESCALED & OILED, STRUCTURAL QUALITY A36 STEEL PER ASTM A36
120175
103 1
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120176
WELDMENT
FROM SHT 3
VIEW U-U
1312"
REF
REF103
ITEM 103
CALTRANS CAD MODEL # 120176
SCALE 1 : 1
3"
2"
2X R34"
14" STK
2X R12"
ITEM 101
CALTRANS CAD MODEL # 120177
SCALE 1 : 1
334"
212"
2X R12"
11732"
11732"
12"
112"
VV
SCALE 1 : 1
CALTRANS CAD MODEL # 120175
ITEM 102
102 REF
112" STK
112" STK
538"
12"
14"
438"
2"
34"
12"
ITEM 101 - FLAT PATTERN
CALTRANS CAD MODEL # 120177
SCALE 1 : 1
334"
212"
SECTION V-V
SCALE 1 : 1
12" STK
UP 90.0° R 1/2"
UP 90.0° R 1/2"
ITEM 103 - FLAT PATTERN
CALTRANS CAD MODEL # 120176
SCALE 1 : 1
1.707 1.707
5.840 12"
PE 6638 REV 0 Page 15 of 53
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
L a n d sc a p e L if tf ra m e
D
SHEET 7 OF 7
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:6
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
A
1178.02 LBS
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE 3-AXLE ROLL-OFF
LIFTFRAME TOP ASSEMBLY
120172 - Landscape Liftframe
WEIGHT
Meta Data =
SECTION N-N
SCALE 1 : 1
8"
45.0°
18"
532"
32"
16"
5178"
5"
6X 1132" THRU ALL
1316" 32"
4732"
10"
1516"
10"
10" 10" 10"
1516"
E
E
SCALE 1 : 1
SECTION K-K
38" STK
316"
932"
316"
32"
32"
32"
3"
18"
32"
SCALE 1 : 1
CALTRANS CAD MODEL # 120173
ITEM 15
2X 58" 2X 434"
2X 234"
4"
6"
4X 932" THRU ALL
916" 32"
2X 58"
58"
58"
NN
ITEM 2
CALTRANS CAD MODEL # 120184
SCALE 1 : 3
38"
45.0°
34" STK
38"
45.0°
ITEM 4
CALTRANS CAD MODEL # 120179
SCALE 1 : 1
9"
4"
3X 234"
3X 58"
2X 58"
2X 434"
2X 7"
4X 932" THRU
1532" 16"
2X 932" THRU
1532" 32"
3"
58"
138"
KK
SCALE 1 : 3
SECTION E-E
2" X 45.0°
1132"
1316" 1132"
53"
1" 17"
34"
51"
4X 4732" 5"
4X 1132" THRU ALL
1316" 32"
1"
F
F
SCALE 1 : 3
SECTION F-F
2" X 45.0°
1132"
1316" 1132"
ITEM 3
CALTRANS CAD MODEL # 120183
SCALE 1 : 3
38" 45.0°
34" STK 38"
45.0°
PE 6638 REV 0 Page 16 of 53
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE6.
SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE
THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE
UNIFORM AND NEAT IN APPEARANCE IN ACCORDANCE WITH
INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND7.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
INSPECTION DIMENSIONS ARE ENCLOSED BY THE SYMBOL8.
APPLY WELDABLE PRIMER TO ALL PARTS/AREAS WHERE PAINT WILL BE9.
IMPOSSIBLE TO REACH AFTER WELDING.
REV. DESCRIPTION DATE APPROVED
REVISIONS
H
UPDATED TOLERANCES AND REVISED ITEMS FOR EASE OF
MANUFACTURING, INCLUDED EXTERNAL DRAWINGS WITHIN THIS SET
11/18/2024 JONE OUNKHAM
G CORRECTIONS OF STRAIGHTNESS AND FLATNESS CALLOUTS 10/05/2020 Manuel Herrera
E RELEASE TO MANUFACTURING 02/27/2020 Manuel Herrera
ITEM
NO.
QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS PART
STOCK # / CAD #
1 1 L8 x 4 x ½” L-ANGLE, STRUCTURAL A36 STEEL PER ASTM A36
120218
2 1 L8 x 4 x ½” L-ANGLE, STRUCTURAL A36 STEEL PER ASTM A36
120217
3 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120216
4 2
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120215
5 2
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120214
6 2
1/2" THICK PLATE, DRY, A36 STEEL, HOT ROLLED, PICKLED
AND OILED PER ASTM A36
120234
7 2 SQ TUBE, 2 X 2 X 1/4 INCH WALL, A36 STEEL 120233
8 2
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120213
9 2
3/8" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120212
10 2 PILLOW BLOCK TRUNION MOUNT ASSEMBLY 120199
11 8
5/8" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120211
12 2
3/16" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120226
13 2 8” x 3” x ¼” WALL RECTANGULAR TUBE, STRUCTURAL
STEEL PER ASTM A500, GRADE B
120210
14 2
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120209
15 1
3/16" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120208
16 2
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120207
17 2
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120206
18 1 WELDMENT, DRIVER'S SIDE LOCK ASSEM 120197
19 1 WELDMENT, PASS SIDE LOCK ASSEM 120192
20 1 L4x3x1/2" ANGLE, STRUCTURAL, A36 STEEL PER ASTM A36
120232
21 1 L4x4x1/2" ANGLE, STRUCTURAL, A36 STEEL PER ASTM A36
120231
22 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120230
23 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120229
24 1 1/2" THK PLATE, HARDOX 450 WEAR PLATE 120227
25 1 1/2" THK PLATE, HARDOX 450 WEAR PLATE 120224
26 2
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120221
27 2
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120222
28 2
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120190
29 2
3/8" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
120191
30 7
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
- 120188
31 4
3/8" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
- 120187
32 2
3/16" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
- 120283
SHEETS 17 AND 18
SEE SHEETS 19 AND 20
SEE SHEETS 21 AND 22
SEE SHEET 8
SEE SHEET 9
SEE SHEET 10
SEE SHEET 11
SEE SHEET 13
SEE SHEET 23
SEE SHEET 14
SEE SHEET 11
SEE SHEET 15
SEE SHEET 8
SEE SHEET 10
SEE SHEET 10
SEE SHEET 10
SEE SHEET 11
SEE SHEET 11
SEE SHEET 13
SEE SHEET 12
SEE SHEET 12
SEE SHEET 12
SEE SHEET 12
SEE SHEET 12
SEE SHEET 14
SEE SHEET 15
SEE SHEET 16
SEE SHEET 16
SEE SHEET 16
SEE SHEET 16
SEE SHEET 16
LIFT-FRAME
WELDMENT
DEPARTMENT OF TRANSPORTATION
120185 - Landscape
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F F
WEIGHT
L a n d sc a p e L if tf ra m e
E
SHEET 1 OF 24
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
Liftframe
STATE OF CALIFORNIA
Manuel Herrera
EQUIPMENT, OFFICE OF ENGINEERING AND
DRAWN
DIVISION OF EQUIPMENT
BILL OF MATERIALS
MATERIAL
AUTHORIZATION FROM CALTRANS DIVISION OF
CONFIDENTIAL AND PROPRIETARY
FINISH
TWO PLACE DECIMAL .03"
TOLERANCING PER:
.005"
D
PRODUCTION.
R E V
INTERPRET GEOMETRIC
ANSI Y14.5-2009
H
THREE PLACE DECIMAL
1124.27 LBS
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
LANDSCAPE ROLL-OFF
Meta Data =
7X
2X
2X
8X
2X - ONE UNDERNEATH EACH SIDE
SCALE 1 : 8
RE
AR
O F C
AB
CALTRANS CAD MODEL # 120185
WELDMENT - ISOMETRIC VIEW
2X
2X32
4X
2X
2X
SEE SHEET 24
PE 6638 REV 0 Page 17 of 53
F
DEPARTMENT OF TRANSPORTATION
120185 - Landscape
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
LIFT-FRAME
R E V
SHEET 2 OF 24
D L a n d sc a p e L if tf ra m e
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:12
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
WEIGHT
Liftframe H
FINISH
STATE OF CALIFORNIA
PRODUCTION.
INTERPRET GEOMETRIC
WELDMENT
EQUIPMENT, OFFICE OF ENGINEERING AND
MATERIAL
AUTHORIZATION FROM CALTRANS DIVISION OF
TWO PLACE DECIMAL
.005"
CONFIDENTIAL AND PROPRIETARY
TOLERANCING PER:
DIVISION OF EQUIPMENT
BILL OF MATERIALS
Manuel Herrera
.03"
1124.27 LBS
THREE PLACE DECIMAL
ANSI Y14.5-2009
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
LANDSCAPE ROLL-OFF
Meta Data =
SCALE 1 : 9
CALTRANS CAD MODEL # 120185
SHOWN FOR REF ONLY
WELDMENT - EXPLODED VIEW
8X
7X
PE 6638 REV 0 Page 18 of 53
/3
X
/3
B A R
C R O S S M E M B E R
B A R
X
C R O S S M E M B E R
X
X
/3
X
X
X
0"
X
X
8"
/8
/8
2"+-
1/4" 1/8"
" MAX 3
WELD PROFILE
" MAX)8(
4"
F
120185 - Landscape
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
DEPARTMENT OF TRANSPORTATION
R E V
LIFT-FRAME
D
SHEET 3 OF 24
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:12
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
WEIGHT 1124.27 LBS
MATERIAL
Liftframe
STATE OF CALIFORNIA
PRODUCTION.
L a n d sc a p e L if tf ra m e
EQUIPMENT, OFFICE OF ENGINEERING AND
INTERPRET GEOMETRIC
WELDMENT
AUTHORIZATION FROM CALTRANS DIVISION OF
CONFIDENTIAL AND PROPRIETARYTWO PLACE DECIMAL
H
BILL OF MATERIALS
TOLERANCING PER:
Manuel Herrera
.03"
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
LANDSCAPE ROLL-OFF
Meta Data =
BOTTOM OF ANGLE IRON
TIE ENDS
SCALE 2 : 7
2 PLACES
DETAIL D
DO NOT WELD
ON THIS SIDE
TIE ENDS
" 5
11 "
2"
SEE SHT 4
REF
REF
SEE SHT 4
SEE SHT 5
SEE SHT 4
SEE SHT 5
17 2
REF 11 REF11
REF26
REF11 REF27
13 REF
REF
REF 14
REF
11 REF
UNDERNEATH12
REF 24
25 REF
UNDERNEATH SEE SHT 612
29 REF
REF 28
REF
TYP, TIE ENDS
TYP
20"
1/8"
20"
20"
2-2 1/16" 1/16"
1/8" "+1 10
GAP
187.5°
REF
20" 20" 20"
2"
13117"
REF
AE
AE
BB
A
A
AC
AC
2 PLACES
TIE ENDS
SEE SHT 5
SEE SHT 5
REF
SEE SHT 6
SEE SHT 4
TOP VIEW
0.250
B
DRIVER'S SIDE VIEWCOPLANAR ITEM 1 & ITEM 2 SURFACES
TIE ENDS
AS SHOWN &
OPPOSITE SIDE
162 "
" 4
7"
3"
REF
3"
8"
REF
L
L
Z
Z
TIE ENDS
SCALE 2 : 7
BOTTOM OF ANGLE IRON
TIE ENDS
TIE ENDS
2 PLACES
DETAIL C
DO NOT WELD
ON THESE SIDES
TIE ENDS
" 1
" 2
8 21
2"
TIE ENDS
DETAIL 2 PLACES
2 PLACES
TIE ENDS
DETAIL F
2 PLACES
SCALE 1 : 1
3/8" MAX
WRAP AROUND END
BLENDED WITH LOWER WELD
2 PLACES
WRAP AROUND
TIE ENDS
" 3
" 1
2X 11
PE 6638 REV 0 Page 19 of 53
SHEET 4 OF 24
120185 - Landscape
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
LIFT-FRAME
R E V
DEPARTMENT OF TRANSPORTATION
D
F
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
WEIGHT 1124.27 LBS
MATERIAL
Liftframe
STATE OF CALIFORNIA
DIVISION OF EQUIPMENT
Manuel Herrera
EQUIPMENT, OFFICE OF ENGINEERING AND
INTERPRET GEOMETRIC
WELDMENT
AUTHORIZATION FROM CALTRANS DIVISION OF
CONFIDENTIAL AND PROPRIETARYTWO PLACE DECIMAL
H
PRODUCTION.
BILL OF MATERIALS
TOLERANCING PER:
L a n d sc a p e L if tf ra m e
.03"
.005"
ANSI Y14.5-2009
THREE PLACE DECIMAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
LANDSCAPE ROLL-OFF
Meta Data =
SCALE 1 : 4
FROM SHT 3
SECTION AE-AE
REF
18 19
11 REF
DETAIL Y
SCALE 1 : 1
2 PLACES
1 REF
4 - 6
2 - 6
DETAIL 2 PLACES
DETAIL 2 PLACES
DETAIL 2 PLACES
TIE ENDS
DETAIL 2 PLACES
SCALE 1 : 2
FROM SHT 3
MECHANICAL STRAIGHTENING PERMISSIBLE TO CONFORM TO GEOMETRIC TOLERANCES
SECTION A-A
REF
DETAIL 2 PLACES
WRAP AROUND
WRAP AROUND
WRAP AROUND ENDS
M
A0.250"
B
A
WRAP AROUND
TIE ENDS
2 PLACES
4"
3"
4" TYP
1 26"±
2" 7X 51
27"
ISOMETRIC VIEW OF SECTION A-A
SCALE 1 : 6
REF
TIE ENDS
7 PLACES
PE 6638 REV 0 Page 20 of 53
DEPARTMENT OF TRANSPORTATION
120185 - Landscape
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
Manuel Herrera
R E V
LIFT-FRAME
D
F
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
WEIGHT 1124.27 LBS
MATERIAL
Liftframe
STATE OF CALIFORNIA
DIVISION OF EQUIPMENT
PRODUCTION.
EQUIPMENT, OFFICE OF ENGINEERING AND
INTERPRET GEOMETRIC
WELDMENT
SHEET 5 OF 24
BILL OF MATERIALS
TOLERANCING PER:
L a n d sc a p e L if tf ra m e
.03"
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
LANDSCAPE ROLL-OFF
Meta Data =
TIE ENDS
WRAP AROUND
SCALE 2 : 7
FROM SHT 3
SECTION L-L
REF5
REF2
REF
TIE ENDS
WRAP AROUND
BOTH SIDES
TYP,
WRAP AROUND
WRAP AROUND
TIE END
TIE ENDS
1/2" MAX
TIE ENDS
TIE END
1/2" MAX
TYP,
BOTH SIDES
" 2 51
37"
TIE ENDS
2 PLACES
WRAP AROUND
TIE ENDS
WRAP AROUND
SCALE 1 : 4
SECTION M-M
UPPER PIECE ONLY
REF
DETAIL 2 PLACES
DETAIL 2 PLACES
UPPER PIECE ONLY
TIE ENDS
3 REF
DETAIL 2 PLACES
REMOVE LOWER PIECE FROM SUB-ASSEMBLY, ITEM 10
2 PLACES
FROM ANOTHER SUB-ASSEMBLY.
REF
"MATCH SET"UPPER AND LOWER PIECE ARE A
BEFORE WELDING UPPER PIECE
TIE ENDS
SERIAL NO. OF UPPER & LOWER PIECES MUST BE THE SAME.
BE CONCENTRIC WITH HOLE THRU 1/2 INCH PLATE.
LOCATION, MOUNTING HOLE DOES NOT NEED TO
AND MUST RE-INSTALLED AS SUCH - DO NOT MIX PIECES
PILLOW BLOCK MAY BE ADJUSTED TO CORRECT
SERIAL NUMBER FACING THIS SIDE
OF SUB-ASSEMBLY ITEM 10 WITHUPPER PIECE
LOWER PIECE OF SUB-ASSEMBLY ITEM 10 - DO NOT WELD
TIE ENDS
REF
REF
7"
4 "
3"
2"
SCALE 1 : 1
ITEM 10 (2 PLACES)
DETAIL AD
NOTE NOTCH ORIENTATION AS
SHOWN BEFORE WELDING
ANGLE IRON RAILS
DONE BEFORE WELDING
ITEM 20 AND ITEM 23
TIE ENDS
BOTTOM OF LONGITUDINAL
1/2" MAX
1/2" MAX
SCALE 1 : 7
FROM SHT 3
SECTION B-B
2"
2" 1 6
8"
REF
EE
TIE ENDS
ITEM 21 AND ITEM 23
DONE BEFORE WELDING
DETAIL AA
SCALE 1 : 1
1/2" MAX
1/2" MAX
1 2"
14"
SCALE 1 : 1.5
2 PLACES
DETAIL G
7WRAP AROUND
TIE ENDS
2 PLACES
38"
SCALE 1 : 1.5
2 PLACES
DETAIL H
WRAP AROUND
TIE ENDS
2 PLACES
" 8
8"
REF
DETAIL X
SCALE 1 : 1
1 2"
14"
2X
VIEW E-E
SCALE 1 : 4
REF 23
3 REF
REF 2
8 2X
PLUG WELD
THE SLOTS,
5 PLACES
(6X 11 16")
ALL BOLT HOLES
MUST BE CONCENTRIC
MM
PE 6638 REV 0 Page 21 of 53
2"+-
1/4" 1/8"
PILLOW BLOCK
HOLES ARE
CONCENTRIC
Manuel Herrera
120185 - Landscape
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
DEPARTMENT OF TRANSPORTATION
R E V
SHEET 6 OF 24
D
PRODUCTION.
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
WEIGHT 1124.27 LBS
MATERIAL
Liftframe
STATE OF CALIFORNIA
DIVISION OF EQUIPMENT
L a n d sc a p e L if tf ra m e
EQUIPMENT, OFFICE OF ENGINEERING AND
INTERPRET GEOMETRIC
WELDMENT
LIFT-FRAME
BILL OF MATERIALS
TOLERANCING PER:
F
.03"
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
LANDSCAPE ROLL-OFF
Meta Data =
REF1
SCALE 3:4
DETAIL AF7
38"
WRAP AROUND
TIE ENDSTIE ENDS
SCALE 1 : 1
DETAIL V
4 - 6
2 - 6
DETAIL 2 PLACES
ISOMETRIC VIEW OF VIEW E-E
FROM SHT 5
LOWER PIECE.
SCALE 1 : 4
REF
REF
REF 1
TYP
TRUNION HOLE AND
WELD UPPER PIECE,
FACING AS SHOWN FOR
BOTH PILLOW BLOCKS.
LEAVE GAP AWAY FROM
ORIENT WITH SERIAL NUMBER
TIE ENDS
WRAP AROUND END
DETAIL 2 PLACES
TIE ENDS
TIE ENDS
WRAP AROUND
TIE ENDS
WRAP AROUND ENDS
TIE ENDS
WRAP AROUND
DETAIL 2 PLACES
DETAIL 2 PLACES
ON BOTH SIDES
TYP
SCALE 3 : 8
FROM SHT 3
SECTION Z-Z
7X
REF
WRAP AROUND
CRITICAL DIMENSION
BETWEEN SQUARE HOLES
2"381
8"
SCALE 1 : 1
DETAIL W
DETAIL 8 PLACES
ON THESE
PILLOW BLOCKS
THE HOLES DON'T HAVE
TO BE CONCENTRIC
SCALE 1 : 4
FROM SHT 3
VIEW AC-AC
FOR BOTH
REF REF
SEE SHT 7
AXIS OF CONCENTRIC HOLES
SEE SHT 7
TWO PLATES.
THE HOLES DON'T HAVE
TO BE CONCENTRIC
ON THESE TWO PLATES.
38"
AGAG
PE 6638 REV 0 Page 22 of 53
WELDMENT
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
AUTHORIZATION FROM CALTRANS DIVISION OF
R E V
Manuel Herrera
D L a n d sc a p e L if tf ra m e
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
WEIGHT
DEPARTMENT OF TRANSPORTATION
MATERIAL
Liftframe
LIFT-FRAME
STATE OF CALIFORNIA
PRODUCTION.
TWO PLACE DECIMAL
INTERPRET GEOMETRIC
DIVISION OF EQUIPMENT
EQUIPMENT, OFFICE OF ENGINEERING AND
1124.27 LBS
SHEET 7 OF 24
BILL OF MATERIALS
TOLERANCING PER:
F
.03"
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
LANDSCAPE ROLL-OFF
Meta Data =
TIE ENDS
TIE ENDS
PARTIAL ROAD-SIDE ISOMETRIC VIEW
SCALE 1 : 4
TIE ENDS
7X
WRAP AROUND END
TIE ENDS
DETAIL 2 PLACES
SCALE 1 : 4
PARTIAL CURB-SIDE ISOMETRIC VIEW
TIE ENDS
TIE ENDS
TIE ENDS
TIE ENDS
UPPER FLANGE
A
ADJUSTED AS NEEDED TO
GET CORRECT VERTICAL
AND LATERAL DIMENSIONS.
PILLOWBLOCKS MAY BE
SECTION AG-AG
0.015
FROM SHT 6
SCALE 3 : 8
A
1/2 INCH PLATES,
3.250
DOES NOT HAVE TO
BE CONCENTRIC.
2.270
PILLOW BLOCKS
CONCENTRIC
PE 6638 REV 0 Page 23 of 53
120185 - Landscape
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
LIFT-FRAME
R E V
PRODUCTION.
D L a n d sc a p e L if tf ra m e
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:12
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
WEIGHT 1124.27 LBS
MATERIAL
Liftframe
STATE OF CALIFORNIA
DIVISION OF EQUIPMENT
SHEET 8 OF 24
EQUIPMENT, OFFICE OF ENGINEERING AND
INTERPRET GEOMETRIC
WELDMENT
Manuel Herrera
BILL OF MATERIALS
TOLERANCING PER:
F
.03"
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
LANDSCAPE ROLL-OFF
Meta Data =
SCALE 1 : 4
CALTRANS CAD MODEL # 120217
MECHANICAL STRAIGHTENING PERMISSIBLE
ITEM 2
REF2
0.188
10 PLACES
"32
4" 2X 43 4" 2X 43
8 2X 46 " 5
8"
4"
2X 7"
2X 74
5X 2
5X 31 8"
175"
1"
1"
0.188
4" STK
175"
STK8"
4" STK
2" STK
STK
STK8"
2"
4" STK
REF
MECHANICAL STRAIGHTENING PERMISSIBLE
SCALE 1 : 4
ITEM 1
CALTRANS CAD MODEL # 120218
0.188
" 32 9 10X
5X 3 8"
4"
5X 23
8" 2X 465 4" 2X 43
8" 2X 74
2X 4 4"
2X 7"
175"
1"
0.188
4" STK
175"
PE 6638 REV 0 Page 24 of 53
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
Manuel Herrera
R E V
LIFT-FRAME
D
F
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
WEIGHT 1124.27 LBS
MATERIAL
Liftframe
STATE OF CALIFORNIA
DIVISION OF EQUIPMENT
PRODUCTION.
EQUIPMENT, OFFICE OF ENGINEERING AND
INTERPRET GEOMETRIC
WELDMENT
SHEET 9 OF 24
BILL OF MATERIALS
TOLERANCING PER:
L a n d sc a p e L if tf ra m e
.03"
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
LANDSCAPE ROLL-OFF
Meta Data =
SHOWN FOR REF ONLY
ITEM 3 - ISOMETRIC VIEW
CAD MODEL FRONT VIEW
26"
8 " " 2
2X 3"
9"
11" 7 2
16"
2X
7 8 R1"
R1"
2"
ITEM 3 - BOTTOM VIEW
CALTRANS CAD MODEL # 120216
SCALE 1 : 4
REF
"2
REF
8 2
1 " 3X 5 8
7 2 8"
" 2" 2X 9" 8
4X R1"
8"
2X 16
2X 6" " 8
6X 11 16"
4"
2X 3
3X 63
6"101 8"
REF
RIGHT VIEW
8 19
2X R
8"
3 " 14 8
R5 8"
UP 90.0° R 5/8"
UP 90.0° R 5/8"
ITEM 3 - FLAT PATTERN
CALTRANS CAD MODEL # 120216
SCALE 1:4
36.357
9"
13.870
3.620
26.000
9"
TOP VIEW
TOP FLANGE
10"
1 " 2X 2
" 16 5 2X
26"
PE 6638 REV 0 Page 25 of 53
ITEM 4
CALTRANS CAD MODEL # 120215
SCALE 1:2
32 4
1 1
4 18 "
R1"
" 4
7"
8 55 "
32 27 "
32 1031 "
R1"
16 7 "
R1"
11 10
" 2
16"
R2"
ITEM 5 - FLAT PATTERN
CALTRANS CAD MODEL # 120214
3 3
4"
" 4
R
9"
2"
ISOMETRIC VIEW
ITEM 5
ITEM 6 - ISOMETRIC VIEW
ITEM 6 - FLAT PATTERN
CALTRANS CAD MODEL # 120234
11"
3 1
" 1 R 2
R2"
" 4 1 3
R1 2"
1 5
32"
ISOMETRIC VIEW
ITEM 4
CLEARANCE CUT
FOR SUPER SWIVEL
CALTRANS CAD MODEL # 120233
ITEM 7 - ISOMETRIC VIEW
ITEM 7 - LENGTH
2"
26"
WELDMENT
Manuel Herrera
120185 - Landscape
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
L a n d sc a p e L if tf ra m e
R E V
PRODUCTION.
D
F
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:4
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
WEIGHT
Liftframe
EQUIPMENT, OFFICE OF ENGINEERING AND
AUTHORIZATION FROM CALTRANS DIVISION OF
FINISH
LIFT-FRAME
SHEET 10 OF 24
INTERPRET GEOMETRIC
DIVISION OF EQUIPMENT
TWO PLACE DECIMAL
H
TOLERANCING PER:
STATE OF CALIFORNIA
BILL OF MATERIALS
.03"
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
LANDSCAPE ROLL-OFF
Meta Data = PE 6638 REV 0 Page 26 of 53
58" STK
316" STK
ITEM 11
CALTRANS CAD MODEL # 120211
SCALE 1:2
" 3 8 1
2"
U P
.0 R /2
ITEM 9 - FLAT PATTERN
CALTRANS CAD MODEL # 120212
SCALE 1:2
2.990
8.605
1.000
ITEM 8 - FLAT PATTERN
4 53 "
8"
R1 2"
SCALE 1:2
CALTRANS CAD MODEL # 120226
ITEM 12
" 8 3 1
2"
SCALE 1:2
CALTRANS CAD MODEL # 120212
ITEM 9
9 REF
1"
6"
3 3
38" STK
R1 2"
ITEM 8 - ISOMETRIC VIEW
CALTRANS CAD MODEL # 120213
STATE OF CALIFORNIA
120185 - Landscape
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
R E V
PRODUCTION.
D L a n d sc a p e L if tf ra m e
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
AUTHORIZATION FROM CALTRANS DIVISION OF
WEIGHT
DEPARTMENT OF TRANSPORTATION
MATERIAL
Liftframe
LIFT-FRAME
Manuel Herrera
WELDMENT
TWO PLACE DECIMAL
INTERPRET GEOMETRIC
DIVISION OF EQUIPMENT
SHEET 11 OF 24
BILL OF MATERIALS
TOLERANCING PER:
F
.03"
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
Meta Data = PE 6638 REV 0 Page 27 of 53
WELDMENT
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
PRODUCTION.
R E V
AUTHORIZATION FROM CALTRANS DIVISION OF
D
F
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
WEIGHT
DEPARTMENT OF TRANSPORTATION
MATERIAL
Liftframe
LIFT-FRAME
STATE OF CALIFORNIA
Manuel Herrera
TWO PLACE DECIMAL
I…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .