32-12-6606A-Litter_Truck_Body-Drawing_Set_-_REV_2.pdf
PDF 11 MB Posted
- Attached to
- 32-12-6606A BODY, LITTER PICKER
- Solicitation number
- 3212-6606A
- Issued by
- Sacramento County, San Francisco City, California
About this file
The document is a detailed technical drawing set (PE 32-12-6606 REV 2) for a specialized vehicle body design, prepared by a state transportation division, specifically focused on designing a 5-liter picker body assembly. The comprehensive 52-page technical drawing set provides intricate engineering specifications for multiple components including truck body assemblies, personnel buckets, side boards, headboards, braces, frames, covers, and various mounting hardware. The drawings include isometric views, front and side perspectives, detailed cross-sections, and flat pattern layouts with precise dimensional measurements for manufacturing and assembly.
The technical drawings specify manufacturing requirements using standard materials like dry steel sheets, square tubes, and mechanical steel, with rigorous quality standards referencing CalTrans equipment specifications. Each component is meticulously designed with specific tolerances, welding guidelines, and finishing instructions, including requirements to remove burrs, clean metal surfaces, and apply sealants. The drawings indicate multiple variations for left and right-side components, suggesting the design allows for customization and symmetrical construction. Detailed bills of materials accompany each drawing, listing quantities, descriptions, and potential alternative materials or manufacturing approaches, demonstrating a comprehensive approach to design flexibility and potential production variations.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| IFB_32-12-6606A_Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
EQUIPMENT, OFFICE OF ENGINEERING AND
DEPARTMENT OF TRANSPORTATION
9' LITTER TRUCK BODY
121089
WEIGHT
F
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
DESIGNER
.005"
ENG APPR.
.03"
DATE
2589.23
ANSI Y14.5-2009
PRODUCTION.
F
E
RE
V A D
SHEET 1 OF 1
THREE PLACE DECIMAL
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
BILL OF MATERIALS
INTERPRET GEOMETRIC
FINISH
NAME
TOP ASSEMBLY & ACCESSORIES
TWO PLACE DECIMAL
DIVISION OF EQUIPMENT
CONFIDENTIAL AND PROPRIETARY
A
DRAWN
MATERIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
3/6/2025
SEE DWG #118859
SEE DWG #118245
SEE DWG #118859
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 3/06/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 9' LITTER TRUCK BODY 118245
2 1 LITTER BODY PERSONNEL BUCKET ASSEMBLY, DRIVER
SIDE 118859L
3 1 LITTER BODY PERSONNEL BUCKET ASSEMBLY,
PASSENGER SIDE 118859R
PAGE 1 OF 52 PE 32-12-6606 REV 2
UNLESS OTHERWISE SPECIFIED:
REMOVE ALL BURRS AND SHARP EDGES. ALL METAL PARTS SHALL BE1.
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS2.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH3.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER4.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND5.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
DEPARTMENT OF TRANSPORTATION
RE
V
F
118245
9' LITTER PICKER BODY
A
.005"THREE PLACE DECIMAL
CONFIDENTIAL AND PROPRIETARY ASSEMBLY, TRUCK BODY
D
SHEET 1 OF 8
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN DIVISION OF EQUIPMENT
TWO PLACE DECIMAL
PRODUCTION.
ANSI Y14.5-2009
FINISH
.03"
INTERPRET GEOMETRIC
BILL OF MATERIALS
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 2/3/2025 CARTER, K.
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 ASSEMBLY, DECK 118265
2 1 ASSEMBLY, FRONT HEADBOARD 118352
3 1 ASSEMBLY, RIGHT SIDE BOARD, MIDDLE 118356R
4 1 ASSEMBLY, LEFT SIDE BOARD, MIDDLE 118356L
5 2 ASSEMBLY, REAR DOOR 118317
6 1 ASSEMBLY, COVER 118247
7 2 ASSEMBLY, FRONT DOOR 118290
8 1 ASSEMBLY, SIDE BOARD, LEFT 118371L
9 1 ASSEMBLY, SIDE BOARD, RIGHT 118371R
10 2 ASSESMBLY, SIDE DOOR 118336
11 1 SUB ASSY, LIGHT RACK 121061
12 1 3" X 1-1/2" X 1/8" WALL SQUARE TUBE, MECHANICAL
STEEL, PICKLED & OILED, ASTM A500 118402
13 2 1/2" THK PLATE, DRY, A36 STEEL HOT ROLLED, PICKLED
& OILED PER ASTM A36 120637
14 2 10 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 120638
15 1 10 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 120639
16 4 10 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118480
17 4 1/4" THK PLATE, DRY, A36 STEEL HOT ROLLED, PICKLED
& OILED PER ASTM A36 118500
18 8 LIFT-OFF HINGE W/O HOLES, ZINC-PLATED LOW
CARBON STEEL, 1-1/4" X 2-11/16" DOOR LEAF
MCMASTER
15195A49 OR EQUIV
19 7
LIFT-AND-DROP BARREL SLIDE-BOLT LATCH, EASY-
GRIP, ZINC-PLATED STEEL, 3" WIDE X 1-3/4" HIGH, 1/2"
BOLT
MCMASTER
3356A77 OR EQUIV
20 3 10 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 120928
21 4 HEX HEAD BOLT, 3/8"-16 UNC-2A x 3-1/4" LONG, 1"
THREADED, GRADE 8, ZINC YELLOW-CHROMATE
PLATED
22 8 SAE WASHER, 3/8" SCREW SIZE, 0.812" OD, GRADE 8,
ZINC YELLOW-CHROMATE PLATED .
23 4 LOCKNUT, NYLON INSERT, 3/8"-16 UNC-2B, GRADE 8,
ZINC YELLOW-CHROMATE PLATED .
24 6 HEX HEAD BOLT, 7/16"-14 UNC-2A x 1-1/2" LONG, FULLY THREADED, GRADE 8, ZINC YELLOW-
CHROMATE PLATED
25 12 SAE FLAT WASHER, 7/16" SCREW SIZE, 0.922" OD,
GRADE 8, ZINC YELLOW-CHROMATE PLATED .
26 6 LOCKNUT, NYLON INSERT, 7/16"-14 UNC-2B, GRADE 8,
ZINC YELLOW-CHROMATE PLATED .
SEE DWG #118265
SEE DWG #118352
SEE DWG #118356
SEE DWG #118371
SEE DWG #118356
SEE DWG #118317
SEE DWG #118247
SEE DWG #118290
SEE DWG #118371
SEE DWG #118336
SEE DWG #121061
6 PLCS
FRONT
ASSEMBLY, TRUCK BODY
RIGHT REAR CORNER
ISOMETRIC VIEW
SCALE 1:8
RIGHT SIDE
LEFT SIDE
PAGE 2 OF 52 PE 32-12-6606 REV 2
4"
TYP
OPP SIDE
THIS SIDE & OPP SIDE
16"2
TYP
16"
TYP
THIS SIDE & OPP SIDE
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
D
A
SHEET 2 OF 8
WEIGHT
118245
RE
V
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, TRUCK BODY
A
PRODUCTION.
9' LITTER PICKER BODY
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
TWO PLACE DECIMAL
ANSI Y14.5-2009TOLERANCING PER:
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
THREE PLACE DECIMAL .005"
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
TYP
OPP SIDE
OPP SIDE
SCALE 2 : 5
TYP
DETAIL A
OPP SIDE
TYP
TYP
OPP SIDE
1 "4
OPP SIDE
"16
"16
TYP
OPP SIDE
TYP
TYP
5 "16
OPP SIDE
OPP SIDE
TYP
"8
8"
TYP
OPP SIDE
TYP
OPP SIDE
OPP SIDE
SCALE 1 : 2
TYP
DETAIL E
OPP SIDE
TYP
TYP
8"18
OPP SIDE
OPP SIDE
TYP
"8
4"
TYP
OPP SIDE
THIS SIDE& OPP SIDE
DETAIL C
SCALE 1 : 1
TYP
THIS SIDE AND OPP SIDE
TYP
WELD PIN IN PLACE
TRIM ENDS
TYP
THIS SIDE & OPP SIDE
TYP
THIS SIDE & OPP SIDESCALE 1 : 3
DETAIL B
REF10
5"
TYP
OPP SIDE
28"
TYP
OPP SIDE
DETAIL D
SCALE 1 : 1
10 REF16
3 " TYP
8" TYP
SCALE 1:7
ASSEMBLY, TRUCK BODY
RIGHT SIDE VIEW
-USE SLIDE BOLT
TO LOCATE POSITION
-TYP
-OPP SIDE
PAGE 3 OF 52 PE 32-12-6606 REV 2
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
9' LITTER PICKER BODY
RE
V
SHEET 3 OF 8
WEIGHT
118245
PRODUCTION.
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, SIDE BOARDS
A
A
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
SCALE 1 : 3
DETAIL F
TO LOCATE POSITION
USE SLIDE BOLT
1919 REF 1
1 "
16"
SCALE 1 : 3
DETAIL I
SCALE 1 : 3
DETAIL G
DETAIL H
SCALE 1 : 3
SCALE 1:7
5 5
ASSEMBLY, TRUCK BODY
REAR VIEW
LEFT SIDE VIEW
ASSEMBLY, TRUCK BODY
SCALE 1:8
PAGE 4 OF 52 PE 32-12-6606 REV 2
SCALE 1 : 1
SECTION O-O
MATCH DRILL FOR HARDWARE
TYP - OPP SIDE
DETAIL N
REF
SCALE 1 : 3
4 PLCS
O
O
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
9' LITTER PICKER BODY
RE
V
SHEET 4 OF 8
WEIGHT
118245
PRODUCTION.
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, TRUCK BODY
A
D A
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
1 : 6
SECTION M-M
SCALE
TYP
DETAIL J
SCALE 2 : 3
OPP SIDE
TYP
OPP SIDE
16"
TYP
SCALE 1:10
TO LOCATE POSITION
-TYP
-OPP SIDE
-USE BARREL BOLT
ASSEMBLY, TRUCK BODY
RIGHT SIDE VIEW
SCALE 2 : 3
OPP SIDE
TYP
DETAIL L
SCALE 2 : 3
OPP SIDE
TYP
DETAIL M
TO LOCATE POSITION
-TYP
TYP
DETAIL K
SCALE 2 : 3
-USE BARREL-BOLT
OPP SIDE
-OPP SIDE
TYP
OPP SIDE
16"
TYP
ASSEMBLY, TRUCK BODY
SCALE 1:10
TOP VIEW
MM
PAGE 5 OF 52 PE 32-12-6606 REV 2
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
D
9' LITTER PICKER BODY
SHEET 5 OF 8
WEIGHT
118245
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, TRUCK BODY
A
PRODUCTION.
RE
V
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
NOT SHOWN
-ASSEMBLY, FRONT DOOR 118290
-ASSEMBLY, COVER 118247
TYP
OPP SIDE
TYP
SCALE 1 : 2
OPP SIDE
DETAIL P
1-4
TYP
OPP SIDE
SCALE 1:12
ISOMETRIC VIEW
ASSEMBLY, TRUCK BODY
LEFT FRONT CORNER
ISOMETRIC VIEW
SCALE 1:12
REF
ASSEMBLY, TRUCK BODY
RIGHT REAR CORNER
SCALE 1:12
ASSEMBLY, TRUCK BODY
ISOMETRIC VIEW
RIGHT FRONT CORNER
REF8
DETAIL W
SCALE 1 : 2
OPP SIDE
TYP
WRAP AROUND CORNERS
DETAIL T
SCALE 1 : 2
SCALE 1 : 2
DETAIL Q
TYP
OPP SIDE
SCALE 1 : 2
DETAIL V
OPP SIDE
TYP
OPP SIDE
TYP
OPP SIDE
DETAIL R
TYP
WRAP AROUND CORNERS
SCALE 1 : 3
DETAIL S
SCALE 1 : 3
OPP SIDE
TYP
WRAP AROUND CORNERS
OPP SIDE
TYP
OPP SIDE
TYP
DETAIL U
SCALE 1 : 3
OPP SIDE
TYP
1-4
PAGE 6 OF 52 PE 32-12-6606 REV 2
9' LITTER PICKER BODY
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
D
RE
V
SHEET 6 OF 8
WEIGHT
118245
PRODUCTION.
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, TRUCK BODY
A
A
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
ISOMETRIC VIEW
SCALE 1:10
ASSEMBLY, TRUCK BODY
BOTTOM LEFT FRONT CORNER
SCALE 1:10
ISOMETRIC VIEW
ASSEMBLY, TRUCK BODY
BOTTOM LEFT REAR CORNER
DETAIL X
OPP SIDE
TYP
REF
SCALE 1 : 3
1-2 1-2
TYP
REF
OPP SIDE
TYP
DETAIL Y
OPP SIDE
SCALE 1 : 3
1-2 1-2
TYP
OPP SIDE
OPP SIDE
TYP
1-2
DETAIL Z
REF
SCALE 1 : 2
1-2
NOT SHOWN
-ASSEMBLY, FRONT DOOR 118290
-ASSEMBLY, COVER 118247
PAGE 7 OF 52 PE 32-12-6606 REV 2
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
SHEET 7 OF 8
WEIGHT
118245
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, TRUCK BODY
A
PRODUCTION.
D
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
ASSEMBLY, TRUCK BODY
LEFT FRONT CORNER
-ASSEMBLY, COVER 118247
-ASSEMBLY, FRONT DOOR 118290
ISOMETRIC VIEW
SCALE 1:8
REF
NOT SHOWN
TYP
DETAIL AA
SCALE 1 : 2
OPP SIDE
TYP
OPP SIDE
SCALE 1 : 5
DETAIL BB
20 20
1-6 1-6
TYP
3 PLCS
33" "33 8 333 8"
11 REF
SCALE 1:10
ASSEMBLY, TRUCK BODY
TOP VIEW
ASSEMBLY, TRUCK BODY
REAR VIEW
SCALE 1:10
PAGE 8 OF 52 PE 32-12-6606 REV 2
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
A
RE
V
SHEET 8 OF 8
WEIGHT
118245
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, TRUCK BODY
A
PRODUCTION.
D
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
2/3/2025
1R 4"
4"
R1 8"
R 1/8"
UP 90.0°
120638
CT FLAT PATTERN
SCALE 1:1
"811
2.250
118500
SCALE 1:1
3"
2"
R1 4"
120639
SCALE 1:1
3R 4"
2"
"3
5 "
8"
R1 8"
120928
SCALE 1:2
1 "2 5 "16
"271
"16
"82323 8" R1
8"
R1 8"
"821
8"
R1 8"
118402
SCALE 1:3
8"
120637
SCALE 1:1
"21
3"
R1 8"
118480
SCALE 1:1
32"
2"
"1 4
1 "R 2
4"
120638
SCALE 1:2
"421
"1
4"
R1 8"
"413
2"
R1 8"
R1 4"
3" STK
" STK1
64" STK
UP 90.0° R 1/8"
120928
CT FLAT PATTERN
SCALE 1:1
3.016
1.008
7.500
UP 90.0° R 1/8"
120639
CT FLAT PATTERN
SCALE 1:1
2.997
2.000
1.624
"413
4"
R1 8"
PAGE 9 OF 52 PE 32-12-6606 REV 2
REMOVE ALL BURRS AND SHARP EDGES. ALL METAL PARTS SHALL BE 1.
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS 2.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 3.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 4.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND 5.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
WEIGHT
A
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
RE
V
F
118265
9' LITTER PICKER BODY
CONFIDENTIAL AND PROPRIETARY ASSEMBLY, DECK
D
SHEET 1 OF 11
DEPARTMENT OF TRANSPORTATION
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN DIVISION OF EQUIPMENT
TWO PLACE DECIMAL
PRODUCTION.
ANSI Y14.5-2009
FINISH
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/22/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 ASSEMBLY, SIDE RAILS TO FRAME 118407
2 1 1/8" THICK, DIAMOND PATTERN FLOOR PLATE, LOW
CARBON STEEL 118280
3 1 1/8" THICK, DIAMOND PATTERN FLOOR PLATE, LOW
CARBON STEEL 118281
4 1 1/8" THICK, DIAMOND PATTERN FLOOR PLATE, LOW
CARBON STEEL 118282
5 2 10 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118815
6 2 3/16" THICK PLATE, A36 STEEL, DRY, LASER QUALITY,
HOT ROLLED, PICKLED & OILED PER ASTM A36 120886
7 15 10-32 x 3/4" WELD STUD 118266
1 : 10
SECTION A-A
SCALE
C
B
B
SCALE 1 : 2
DETAIL C
REF
TYP
OPP SIDE
118265
ASSEMBLY, DECK
RIGHT REAR ISOMETRIC VIEW
SCALE 1:10
1-4
3-12
3-12
ASSEMBLY, DECK
TOP VIEW
SCALE 1:10
118265
1/16 1/161/16
1/16 1/16
1/16 1/16
1/16 3-12
2"
8"
AA
2X
SCALE 1 : 2
OPP SIDE
SECTION B-B
TYP
TYP
OPP SIDE
PAGE 10 OF 52 PE 32-12-6606 REV 2
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
9' LITTER PICKER BODY
RE
V
SHEET 2 OF 11
WEIGHT
118265
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
PRODUCTION.
A D
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
TWO PLACE DECIMAL
.005"
THREE PLACE DECIMAL
CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
REF
REF
118265
ASSEMBLY, DECK
BOTTOM LEFT REAR ISOMETRIC VIEW
SCALE 1:10
118265
ASSEMBLY, DECK
TOP VIEW
SCALE 1:10
DD
MM
SCALE 1 : 5
SECTION D-D
3-12 3-12 3-12
3-12
6 EE
715X
SECTION M-M
SCALE 1 : 5
TYP
15 PLCS
8"
2"
8" X 14
2-4
TYP
2-4
SCALE 1 : 5
SECTION E-E
REF
TYP
2"
2"
PAGE 11 OF 52 PE 32-12-6606 REV 2
7 ""
1"
16"
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
PRODUCTION.
RE
V
SHEET 3 OF 11
WEIGHT
118265
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
D A
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
118282
SCALE 1:8
3 "29 4
4"
118815
SCALE 1:1
"827
1"
2"R1 4"
CL
SCALE 1:5
118280
CL
91"
35"
16"
35"
118281
SCALE 1:8
37"
91"
3 "1 16
R1 4"
8"
120886
SCALE 1:3
34"
UP 90.0° R 1/4"
UP 90.0° R 1/4"
120886
CT FLAT PATTERN
SCALE 1:3
8.000
1.000
1.000
34.000
PAGE 12 OF 52 PE 32-12-6606 REV 2
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
BILL OF MATERIALS
RE
V
SHEET 4 OF 11
WEIGHT
118265
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
PRODUCTION.
A D
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
TWO PLACE DECIMAL
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 ASSEMBLY, BRACE TO FRAME 118409
2 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118272
3 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118273
4 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118278
5 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118268
6 7 10-32 x 3/4" WELD STUD 118266
118407
ASSEMBLY, SIDE RAILS TO FRAME
RIGHT REAR ISOMETRIC VIEW
SCALE 1:8
LEFT FRONT ISOMETRIC VIEW
SCALE 1:8
118407
ASSEMBLY, SIDE RAILS TO FRAME
TYP
OPP SIDE
2-6
DETAIL F
SCALE 1 : 3
OPP CORNER
TYP
1-2
DETAIL H
SCALE 1 : 2
OPP SIDE
TYP
DETAIL G
SCALE 1 : 2
TYP
OPP SIDE
OPP SIDE
SCALE 1 : 2
TYP
DETAIL I
TYP
PAGE 13 OF 52 PE 32-12-6606 REV 2
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
D
PRODUCTION. SHEET 5 OF 11
WEIGHT
118265
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, DECK
A
RE
V A
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
INTERPRET GEOMETRIC
.03" CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
TYP
OPP SIDE OPP SIDE
TYP
1-2
SCALE
SECTION J-J
1 : 4
2 REF
REF
OPP SIDE
TYP
TYP
TYP
OPP SIDE
OPP SIDEOPP SIDE
TYP
TYP
1-2
OPP SIDE
OPP SIDE
TYP
OPP SIDE
TYP
TYP
OPP SIDE
1-2OPP SIDE
TYP
REF
REF2
REF3
REF
118407
ASSEMBLY, SIDE RAILS TO FRAME
TOP VIEW
SCALE 1:12
JJ
K K
118407
ASSEMBLY, SIDE RAILS TO FRAME
SIDE VIEW
SCALE 1:12
L
L
1 : 4 SCALE
SECTION L-L
7X
TYP
7 PLCS11" 9" 9" 9" 11"14" 9"
8"
1 : 3
TYP
SECTION K-K
SCALE
OPP SIDE
TYP
1-2 OPP SIDE
TYP
1-2
OPP SIDE
TYP
PAGE 14 OF 52 PE 32-12-6606 REV 2
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 6 OF 11
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER: ANSI Y14.5-2009
TWO PLACE DECIMAL .03"
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, DECK
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118265
WEIGHT
1/22/2025
SIDE VIEW
SIDE VIEW
8"
2"
R9 64"
118272
SCALE 1:4
FRONT VIEW
72"
118273
SCALE 1:4
FRONT VIEW
72"
TOP VIEW
UP 90.0° R 9/64"
UP 90.0° R 9/64"
118273
CT FLAT PATTERN
SCALE 1:4
2.018
2.049
9.333
72.000
TOP VIEW
2"
8"
R9 64"
UP 90.0° R 9/64"
UP 90.0° R 9/64"
118272
CT FLAT PATTERN
SCALE 1:4
2.049
2.018
9.333
72.000
PAGE 15 OF 52 PE 32-12-6606 REV 2
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 7 OF 11
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, DECK
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118265
WEIGHT
1/22/2025
SIDE VIEW
16"
4"
R9 64"
118278
SCALE 1:4
FRONT VIEW
4"
UP 90.0° R 9/64"
UP 90.0° R 9/64"
118268
CT FLAT PATTERN
SCALE 1:4
.893
1.893
9.907
95.250
TOP VIEW
SIDE VIEW
1"
16"
2"
R9 64"
118268
SCALE 1:4
FRONT VIEW
4"
5 X 27 8" 3 X 41
2"
TOP VIEW
UP 90.0° R 9/64"
118278
CT FLAT PATTERN
SCALE 1:4
5.145
.002
49.750
PAGE 16 OF 52 PE 32-12-6606 REV 2
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 8 OF 11
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
BILL OF MATERIALS
A
ASSEMBLY, DECK
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118265
WEIGHT
1/22/2025
118409
ASSEMBLY, BRACE TO FRAME
RIGHT REAR ISOMETRIC VIEW
SCALE 1:5
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118267
2 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118269
3 3 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118270
4 6 1/4" THK PLATE, DRY, A36 STEEL HOT ROLLED, PICKLED
& OILED PER ASTM A36 118279
5 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118283
6 2
6 X 2 X 3/16 WALL SQUARE TUBE, MECHANICAL STEEL,
PICKLED & OILED, ASTM A500 118284
7 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 120894
PAGE 17 OF 52 PE 32-12-6606 REV 2
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 9 OF 11
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, DECK
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118265
WEIGHT
1/22/2025
REF
REF
REF
REF
REF
REF
REF
CL
SYMMETRIC ABOUT
CENTERLINE
118409
ASSEMBLY, BRACE TO FRAME
TOP VIEW
SCALE 1:8
REF
REF
8"
23"
16" 34"
50"
68"
104" 122"
8"
86"
JJ
TYP
SCALE 1 : 5
SECTION J-J
14 PLCS
8 PLCS
TYP
8 PLCS
TYP
14 PLCS
TYP
8"
TYP
6PLCS
CL
PAGE 18 OF 52 PE 32-12-6606 REV 2
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 10 OF 11
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, DECK
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118265
WEIGHT
1/22/2025
FRONT VIEW
FRONT VIEW SIDE VIEW
2"
16"
R9 64"
TOP VIEW
118269
SCALE 1:3
8"
118269
CT FLAT PATTERN
SCALE 1:5
UP 90.0° R 9/64"
UP 90.0° R 9/64"
1.393
7.760
1.39336.125
UP 90.0° R 9/64"
UP 90.0° R 9/64"
120894
CT FLAT PATTERN
SCALE 1:3
1.393
1.393
7.760
95.250
118267
SCALE 1:4
8"
TOP VIEW
SIDE VIEW
8"
R9 64"
UP 90.0° R 9/64"
UP 90.0° R 9/64"
118267
CT FLAT PATTERN
SCALE 1:5
2.018
2.018
9.010
36.125
120894
SCALE 1:3
4"
2"
16"
R9 64"
PAGE 19 OF 52 PE 32-12-6606 REV 2
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 11 OF 11
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, DECK
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118265
WEIGHT
1/22/2025
FRONT VIEW
118284
SCALE 1:3
FRONT VIEW
122"
118270
SCALE 1:4
4"
118279
SCALE 1:2
8"
8"
135.0°
R1"
8"
8"
SIDE VIEW
2"
6"
16"
118283
SCALE 1:1
8"
8"
R1 4"
SIDE VIEW
2"
16"
R9 64"
TOP VIEW
UP 90.0° R 9/64"
UP 90.0° R 9/64"
118270
CT FLAT PATTERN
SCALE 1:3
1.393
7.760
1.393
33.750
PAGE 20 OF 52 PE 32-12-6606 REV 2
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS 2.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 3.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 4.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND 5.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
TYP
SECTION A-A
OPP SIDE
TYP
OPP SIDE
OPP SIDE
TYP
4"
4"
118352
ISOMETRIC VIEW
SCALE 1:4
ASSEMBLY, FRONT HEADBOARD
FRONT VIEW
3X
1-4
OPP SIDE 2-4
TYP
TYP
8"
8"
4"
A
A
TOP VIEW
4"
TYP
SCALE 1 : 2
DETAIL D
4 PLCS
2-4 2-4
TYP
2 PLCS
SCALE 1 : 2
DETAIL B
1 "1 4
4"
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/29/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 HEADBOARD FRAME WELDMENT 118354
2 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118475
3 2 1/4" THICK PLATE, A36 STEEL, DRY, LASER QUALITY, A36
STEEL HOT ROLLED, PICKLED & OILED PER ASTM A36 121060
4 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 121068
5 4 10 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 121094
6 3 10-32 x 3/4" WELD STUD .
NOTE:
ALTERNATIVES TO ITEM 5 ARE ACCEPTABLE UPON REQUEST.
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
A
RE
V
SHEET 1 OF 2
WEIGHT
118352
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, FRONT HEADBOARD
79.93 PRODUCTION.
D A
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
BILL OF MATERIALS
.03"
CONFIDENTIAL AND PROPRIETARY
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/29/2025
PAGE 21 OF 52 PE 32-12-6606 REV 2
1/2" X 45°
121060
SCALE 1:2
1/2" X 45°
5"
1"
9"
10"
5" 1"
3 X 7 16"
OPP SIDE
TOP VIEW
TYP
OPP SIDE
TYP
TYP
OPP SIDE
121068
SCALE 1:4
"4
2"
UP 90.0° R 9/64"
UP 90.0° R 9/64"
UP 90.0° R 9/64"
118475
CT FLAT PATTERN
SCALE 1:3
29.625
2.946
1.764
.748
121094
SCALE 1:1
8"
8" R3
8"
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
RE
V
118352
9' LITTER PICKER BODY
CONFIDENTIAL AND PROPRIETARY ASSEMBLY, FRONT HEADBOARD
D
SHEET 2 OF 2
F
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN DIVISION OF EQUIPMENT
TWO PLACE DECIMAL
PRODUCTION.
ANSI Y14.5-2009
FINISH
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/29/2025
1.1
SCALE 1:4
1.1
118354
1.2
FRONT VIEW
TYP
OPP SIDE
40"
4"
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 HEADBOARD FRAME WELDMENT 118354
1.1 2
3" X 2" X 3/16" WALL, 40" LONG, WALL RECTANGULAR
TUBE, MECHANICAL, STEEL PICKLED & OILED PER
ASTM A513
1.2 1
3" X 2" X 3/16" WALL, 29-3/4" LONG, WALL
RECTANGULAR TUBE, MECHANICAL, STEEL PICKLED &
OILED PER ASTM A513
SIDE VIEW
NOTE:
DIMENSIONS NOT SPECIFIED TO BE DERIVED FROM CAD FILE.
SCALE 1:3
118475
FRONT VIEW
R1 "8
8" "4
6"
8"
3"
R9 64"
PAGE 22 OF 52 PE 32-12-6606 REV 2
REMOVE ALL BURRS AND SHARP EDGES. ALL METAL PARTS SHALL BE DEBURRED TO1.
ENSURE THEY ARE SAFE FOR HANDLING.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS FROM METAL SURFACES2.
BEFORE WELDING. METAL SURFACES SHALL BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH3.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER4.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING TO AVOID NEEDLESS
DISTORTION, AND MINIMIZE SHRINKAGE, WARPING, AND TWISTING OF THE ASSEMBLY.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND SEAMS NOT WELDED5.
CONTINOUS. SEAL USING SIKAFLEX-521 UV RESISTANT, WHITE COLOR MANUFACTURED BY
SIKA CORPORATION.
R
1/29/2025
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
RE
V
F
D
BILL OF MATERIALS
WEIGHT
118356
9' LITTER PICKER BODY
.03"TWO PLACE DECIMAL
DIVISION OF EQUIPMENT
SHEET 1 OF 2
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
ANSI Y14.5-2009
PRODUCTION.
INTERPRET GEOMETRIC
MATERIAL
CONFIDENTIAL AND PROPRIETARY
A
.005" ASSEMBLY, SIDE BOARDS, MID
31.55LBS
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
BILL OF MATERIALS
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/29/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118359L
2 1 2" x 1" x 0.083" WALL SQUARE TUBE, MECHANICAL
STEEL, PICKLED & OILED, ASTM A 513 118481
3 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118482
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118359R
2 1 2" x 1" x 0.083" WALL SQUARE TUBE, MECHANICAL
STEEL, PICKLED & OILED, ASTM A 513 118481
3 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118482
1-3
118356R
ASSEMBLY, RIGHT SIDE BOARD, MID
REAR, ISOMETRIC VIEW
SCALE 1:5
FRONT VIEW
4"
4"
B
B
1-3
SCALE 1:5
FRONT, ISOMETRIC VIEW
ASSEMBLY, RIGHT SIDE BOARD, MID
118356R
1-3
SCALE 1 : 1
DETAIL B
2"
118356L
ASSEMBLY, RIGHT SIDE BOARD, MID
REAR, ISOMETRIC VIEW
SCALE 1:5
FRONT VIEW
1-3
4"
4"
A
A
1-3
SCALE 1:5
FRONT, ISOMETRIC VIEW
ASSEMBLY, RIGHT SIDE BOARD, MID
118356L
SCALE 1 : 1
DETAIL A
PAGE 23 OF 52 PE 32-12-6606 REV 2
48.926
31.217
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 2 OF 2
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, SIDE BOARDS, MID
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118356
WEIGHT
1/29/2025
SIDE VIEW
2"
1"
.083
118482
SCALE 2:1
8"
8"
R1 8"
UP
.0° R
9/
UP
.0° R
9/
118359L (SHOWN)
118359R (MIRRORED)
CT FLAT PATTERN
SCALE 1:4
1.268
3.034
SIDE VIEW
118481
SCALE 1:2
FRONT VIEW
12"
118359L (SHOWN)
118359R (MIRRORED)
SCALE 1:4
FRONT VIEW
C
C
SECTION C-C
SCALE 1 : 3
2"
8"
PAGE 24 OF 52 PE 32-12-6606 REV 2
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS 2.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 3.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 4.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND 5.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
WEIGHT
118317
9' LITTER PICKER BODY
SHEET 1 OF 2
A
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
ANSI Y14.5-2009
.005"
PRODUCTION.
INTERPRET GEOMETRIC
MATERIAL
ASSEMBLY, REAR DOOR
88.63
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/28/2025
TOP VIEW
DETAIL A
SCALE 1 : 1
1-3
REF
TYP
4 PLCS
118317
ASSEMBLY, REAR DOOR
ISOMETRIC VIEW
SCALE 1:6
1-3
TYP
6 PLCS
SCALE 1:4
FRONT VIEW
ASSEMBLY, REAR DOOR
118317
1-3
"1
"4
121 4
8"
147 4"
48"
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/28/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 4 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118327
2 2 2 X 1 X 0.083 WALL RECTANGULAR TUBE, STRUCTURAL
STEEL, ASTM A500, GRADE B 118333
3 3
2 X 1 X 0.083 WALL RECTANGULAR TUBE, STRUCTURAL
STEEL, ASTM A500, GRADE B 118436
4 1 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118439
PAGE 25 OF 52 PE 32-12-6606 REV 2
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 2 OF 2
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
BILL OF MATERIALS
A
ASSEMBLY, REAR DOOR
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118317
WEIGHT
1/28/2025
2"
1".083
118327
SCALE 1:5
8"
8"
R1 8"
118333
SCALE 1:5
8"
118439
SCALE 1:5
45"
4" R3
8"
118436
SCALE 1:5
2"
1"
2"
.083
PAGE 26 OF 52 PE 32-12-6606 REV 2
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS2.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH3.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER4.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND5.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
118247
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
RE
V
F
EQUIPMENT, OFFICE OF ENGINEERING AND
9' LITTER PICKER BODY
WEIGHT
E
INTERPRET GEOMETRIC
CONFIDENTIAL AND PROPRIETARY
A
D
SHEET 1 OF 3PRODUCTION.
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
ASSEMBLY, COVER
TWO PLACE DECIMAL
DIVISION OF EQUIPMENTDRAWN
THREE PLACE DECIMAL
ANSI Y14.5-2009
MATERIAL
© COPYRIGHT 2024 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/22/2025
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/22/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 TUBE, WELDMENT 118249
2 2 3/16" THK PLATE, DRY, A36 STEEL HOT ROLLED,
PICKLED & OILED PER ASTM A36 118494
3 2 3/16" THK PLATE, DRY, A36 STEEL HOT ROLLED,
PICKLED & OILED PER ASTM A36 118495
4 4 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 121082
SCALE 1:8
ASSEMBLY, COVER
ISOMETRIC VIEW
118247
NOTE:
ALTERNATIVES TO ITEM 4 ARE ACCEPTABLE UPON REQUEST
94"
65"
8"
1"
4 CORNERS
TYP
TYP
TYP
SCALE 1 : 2
DETAIL F
4 CORNERS
1-4
8"
1"
4 REF
TYP
4 PLCS
REF
4 PLCS
SCALE 1 : 2
TYP
DETAIL G
REF
4 REF
PAGE 27 OF 52 PE 32-12-6606 REV 2
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 2 OF 3
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2024 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, COVER
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
118247
WEIGHT
1/22/2025
9' LITTER PICKER BODY
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 TUBE, WELDMENT 118249
1.1 1 1-1/2" X 1" X 0.083", 90-1/2" LONG, WALL RECTANGULAR TUBE,
MECHANICAL, STEEL PICKLED & OILED PER ASTM A513
1.2 2 1-1/2" X 1" X 0.083", 44-3/4" LONG, WALL RECTANGULAR TUBE,
MECHANICAL, STEEL PICKLED & OILED PER ASTM A513
1.2
1.2
1.1
CT# 118249
TUBE, WELDMENT
SCALE 1:4
2"
4"443
4"
PAGE 28 OF 52 PE 32-12-6606 REV 2
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 3 OF 3
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2024 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
A
ASSEMBLY, COVER
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118247
WEIGHT
1/22/2025
UP 90.0° R 1/4"
118495
CT FLAT PATTERN
SCALE 1:2
94"1.557
3.115
121082
SCALE 1:6
4"
4"
UP 90.0° R 1/4"
118494
CT FLAT PATTERN
SCALE 1:2
65"
1.557 3.115
4"
4"
R1 4"
NOTE: DIMENSIONS NOT SPECIFIED TO BE DERIVED FROM CAD FILE
65"
118494
SCALE 1:2
118495
SCALE 1:2
94"
4"
4"R1
PAGE 29 OF 52 PE 32-12-6606 REV 2
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS 2.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 3.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 4.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
A
RE
V
F
118290
ASSEMBLY, FRONT DOOR
CONFIDENTIAL AND PROPRIETARY
9' LITTER PICKER BODY
D
SHEET 1 OF 2
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN DIVISION OF EQUIPMENT
TWO PLACE DECIMAL
PRODUCTION.
ANSI Y14.5-2009
FINISH
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/28/2025
SCALE 1:3
FRONT VIEW
3 "
4"
CC
SCALE 1:3
SIDE VIEW
DETAIL D
SCALE 1 : 1
REF
TYP
1"
TYP
SCALE 1 : 1
DETAIL F
TYP
118290
ASSEMBLY, FRONT DOOR
ISOMETRIC VIEW
SCALE 1:4
TYP
"411
4"
SCALE 1 : 1
TYP
CL
CL
DETAIL E
TYP
REF
1-2
TYP
1-2
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/28/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 2 2" X 1" X .083" WALL SQUARE TUBE, STRUCTURAL STEEL,
ASTM A500, GRADE B 118302
2 2 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118327
3 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118479
4 2 BARREL BOLT, ZINC, 1/2" HEIGHT, 1-1/2" WIDTH, 4"
LONG 4PB98 905-1254
5 2 BUTT HINGE, STEEL, FULL MORTISE, 1" LEAF WIDTH 4PA65 905-1093
SCALE
SECTION C-C
1 : 3
PAGE 30 OF 52 PE 32-12-6606 REV 2
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
PRODUCTION.
RE
V
SHEET 2 OF 2
WEIGHT
118290
ASSEMBLY, FRONT DOOR
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
9' LITTER PICKER BODY
A
A D
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
TWO PLACE DECIMAL
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/28/2025
SCALE 1:3
118479
FRONT VIEW
2" 1"
"8
"4
4"
R3 32"
SIDE VIEW
118303
SCALE 2:1
"7
8"
R1 8"
SIDE VIEW
1"
2"
64"
SCALE 1:1
118302
FRONT VIEW
4"
UP 90.0° R 3/32"
UP 90.0° R 3/32"
SCALE 1:3
118479
CT FLAT PATTERN
UP 90.0° R 3/32"
.708
1.596
.748
45.500
PAGE 31 OF 52 PE 32-12-6606 REV 2
REMOVE ALL BURRS AND SHARP EDGES. ALL METAL PARTS SHALL BE DEBURRED TO ENSURE THEY ARE SAFE FOR 1.
HANDLING.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS FROM METAL SURFACES BEFORE WELDING. METAL 2.
SURFACES SHALL BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO 3.
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE 4.
OF WELDING TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE, WARPING, AND TWISTING OF THE ASSEMBLY
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND SEAMS NOT WELDED CONTINOUS. SEAL USING 5.
SIKAFLEX-521 UV RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/30/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 SIDEBOARD FRAME WELDMENT 118401
2 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118486
3 1 16 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118484L
4 1
2" X 1" X 0.083" WALL, 34-1/2" LONG, WALL
RECTANGULAR TUBE, MECHANICAL, STEEL PICKLED &
OILED PER ASTM A513
118400
5 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 121077
6 6 10-32 x 3/4" WELD STUD 118266
6X
6 PLCS
SCALE 1 : 4
SECTION D-D
TYP
4" "2
8" X 5
1 : 4SCALE
SECTION A-A
ISOMETRIC VIEW
SCALE 1:7
118371L
ASSEMBLY, SIDE BOARD, LEFT
NOTE:
ALTERNATIVES TO ITEM 5 ARE ACCEPTABLE UPON REQUEST
TYP
OPP SIDEFRONT VIEW
ASSEMBLY, SIDE BOARD, LEFT
SCALE 1:4
118371L
1-2
1 "69 8
13111
2"
C
C
D
D
A
A
DETAIL B
SCALE 1 : 2
1-4
"411
2"
SECTION C-C
SCALE 1 : 4
2 PLCS
TYP
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
A
RE
V
F
118371
9' LITTER PICKER BODY
THREE PLACE DECIMAL .005" ASSEMBLY, SIDE BOARDS
SHEET 1 OF 4
MATERIAL
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN DIVISION OF EQUIPMENT
TWO PLACE DECIMAL
BILL OF MATERIALS
ANSI Y14.5-2009
FINISH
.03" CONFIDENTIAL AND PROPRIETARY
PRODUCTION.92.24
INTERPRET GEOMETRIC
A
L
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/30/2025
PAGE 32 OF 52 PE 32-12-6606 REV 2
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
R
D
SHEET 2 OF 4
WEIGHT
118371
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, SIDE BOARDS
A
BILL OF MATERIALS
A
PRODUCTION.
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
TWO PLACE DECIMAL
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/30/2025
1 : 4SCALE
SECTION H-H
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 SIDEBOARD FRAME WELDMENT 118401
2 1
2" X 1" X 0.083" WALL, 34-1/2" LONG, WALL
RECTANGULAR TUBE, MECHANICAL, STEEL PICKLED &
OILED PER ASTM A513
118400
3 1 16 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118484R
4 2 12 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 118486
5 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 121077
SCALE 1:4
FRONT VIEW
ASSEMBLY, SIDE BOARD, RIGHT
118371RTYP
OPP SIDE1-2
11"2311
"2
8"
H
H
F
F
EE
ISOMETRIC VIEW
SCALE 1:7
118371R
ASSEMBLY, SIDE BOARD, RIGHT
NOTE:
ALTERNATIVES TO ITEM 5 ARE ACCEPTABLE UPON REQUEST
DETAIL G
1-4SCALE 1 : 2
1 "1 4
2"
1 : 4 SCALE
SECTION E-E
TYP
2 PLCS
1 : 4SCALE
SECTION F-F
PAGE 33 OF 52 PE 32-12-6606 REV 2
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
D
SHEET 3 OF 4
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
BILL OF MATERIALS
A
ASSEMBLY, SIDE BOARDS
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118371
WEIGHT
1/30/2025
118400
SCALE 1:2
FRONT VIEW
2"
SIDE VIEW
1"
2"
.083
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 SIDEBOARD FRAME WELDMENT 118401
2" X 2" X 0.083" WALL, 53-3/4" LONG, WALL
RECTANGULAR TUBE, MECHANICAL, STEEL PICKLED &
OILED PER ASTM A513
2" X 2" X 0.083" WALL, 69-1/16" LONG, WALL
RECTANGULAR TUBE, MECHANICAL, STEEL PICKLED &
OILED PER ASTM A513
NOTE:
DIMENSIONS NOT SPEDIFIED TO BE DERIVED FROM CAD FILE.
118401
SCALE 1:5
TYP
OPP SIDE 45°
TYP
OPP SIDE
45°
TYP
OPP SIDE
4"
16"
121077
SCALE 1:4
36"
PAGE 34 OF 52 PE 32-12-6606 REV 2
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
RE
V
L
D
SHEET 4 OF 4
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2025 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
A
BILL OF MATERIALS
A
ASSEMBLY, SIDE BOARDS
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
9' LITTER PICKER BODY
118371
WEIGHT
1/30/2025
118484L (SHOWN)
118484R (MIRRORED)
SCALE 1:3
FRONT VIEW
65"
EE
TOP VIEW
SECTION E-E
SCALE 1 : 3
SIDE VIEW
NOTE:
DIMENSIONS NOT SPEDIFIED TO BE DERIVED FROM CAD FILE.
2"
4"
8"
4"
R11 64"
TYP
118484L (SHOWN)
118484R (MIRRORED)
CT FLAT PATTERN
SCALE 1:3
DOWN 90.0° R 11/64"
DOWN 90.0° R 11/64"
DOWN 90.0° R 11/64"
1.173
2.497
.762
65.028
15.130
PAGE 35 OF 52 PE 32-12-6606 REV 2
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 3.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 4.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
16"
4"
8"13
8"
2"
9' LITTER PICKER BODY
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
D
SHEET 1 OF 2
WEIGHT
118336
BILL OF MATERIALS
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
ASSEMBLY, SIDE DOOR
A
PRODUCTION.
A
RE
V
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
TWO PLACE DECIMAL
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/28/2025
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 1/28/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 TUBE, WELDMENT 118348
2 1 14 GA. SHEET, DRY, STEEL HOT ROLLED, PICKLED &
OILED, ASTM A1011 121076
NOTE:
-ALTERNATIVES TO ITEM 2 ARE ACCEPTABLE UPON REQUEST.
-DIMENSIONS NOT SPECIFIED TO BE DERIVED FROM CAD FILE.
121076
SCALE 1:4
1 "28 2
4"
ASSEMBLY, SIDE DOOR
SCALE 1:4
FRONT VIEW
118336
1-4
2"
118336
ASSEMBLY, SIDE DOOR
ISOMETRIC VIEW
SCALE 1:4
PAGE 36 OF 52 PE 32-12-6606 REV 2
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
A
RE
V
F
D
WEIGHT
118336
9' LITTER PICKER BODY
SHEET 2 OF 2PRODUCTION.
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
ANSI Y14.5-2009
.005"
INTERPRET GEOMETRIC
MATERIAL
CONFIDENTIAL AND PROPRIETARY
ASSEMBLY, SIDE DOOR
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
1/28/2025
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 1 TUBE, WELDMENT 118348
1.1 2 2" x 1" x 0.083", 31-3/16" LONG, WALL RECTANGULAR TUBE, MECHANICAL, STEEL PICKLED & OILED PER ASTM A513
1.2 2 2" x 1" x 0.083", 34-1/4" LONG, WALL RECTANGULAR TUBE, MECHANICAL, STEEL PICKLED & OILED PER ASTM A513
45°
TYP
TYP
45°
1.1
1.2
SCALE 1:3
1.2
45°
118348
1.1
TYP
PAGE 37 OF 52 PE 32-12-6606 REV 2
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 3.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 4.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
THREE PLACE DECIMAL
WEIGHT
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
E
F
RE
V
9' LITTER PICKER BODY
DEPARTMENT OF TRANSPORTATION
EQUIPMENT, OFFICE OF ENGINEERING AND
121061
ASSEMBLY, LIGHT RACK
D
SHEET 1 OF 3
A
MATERIAL
ANSI Y14.5-2009
CONFIDENTIAL AND PROPRIETARY
TOLERANCING PER:
CARTER, K.
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
TWO PLACE DECIMAL
INTERPRET GEOMETRIC
F
FINISH
DRAWN
PRODUCTION.
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
STATE OF CALIFORNIA
3/5/2025
REV. DESCRIPTION DATE APPROVED
REVISIONS
A INITIAL RELEASE 3/5/2025 CARTER
ITEM
NO. QTY. DESCRIPTION SUPPLIER/MFG
PART NO.
CALTRANS
PART/EDP NO.
1 2 1/4" THICK PLATE, A36 STEEL, DRY, LASER QUALITY, A36
STEEL HOT ROLLED, PICKLED & OILED PER ASTM A36 121060
2 2
2" X 2 " X .1875" WALL SQUARE TUBE, STRUCTURAL
STEEL, ASTM A500, GRADE B 121062
3 1
2" X 2 " X .1875" WALL SQUARE TUBE, STRUCTURAL
STEEL, ASTM A500, GRADE B 121063
4 2 3/16" THK PLATE,…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .