3195-7900 - ASTM-A-6 for General R.._Redacted.pdf
PDF 137 KB Posted
- Attached to
- CONEX BOX Federal contract opportunity
- Solicitation number
- SPMYM223Q1935
About this file
This material ordering data sheet specifies requirements for rolled structural steel bars, plates, shapes and sheet piling to be procured under solicitation number SPMYM223Q1935 for Conex boxes. The product required is 80 feet of 3" x 2" x 1/4" thick A36 steel shapes cut into 20 lengths. Testing and documentation requirements include a mechanical property test report for each heat in accordance with ASTM A6 Section 14 and special packaging, marking and loading for shipment per ASTM A6 Section 19.3 and MIL-STD-129. Repair welding must comply with ASTM A6 Section 9.5. The Defense Logistics Agency Land and Maritime is the contracting agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SOLICITATION AMENDMENT NOTICE_SPMYM223Q1935.pdf | ||
| SF30 AMENDMENT NOTICE_SPMYM223Q1935.pdf | ||
| 3195-7900 - CERTIFIED MILL TEST REPORT (CMTR) CDRL DI-MISC-82386 10-01-22.pdf | ||
| SOLICITATION NOTICE_SPMYM223Q1934.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
ASTM-A6/A6M
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 3195-7900
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 4 Ordering Data
ASTM-A6/A6M, STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR
ROLLED STRUCTURAL STEEL BARS, PLATES, SHAPES AND SHEET PILING,
dated 15 NOVEMBER 2022.
4.1.1 Select ASTM product specification designation:
A36/A36M
Select One (cont.):
4.1.2 Name of structural product: shape
4.1.3 Shape designation, or size and thickness or diameter: 3" X 2" X 1/4" THK
4.1.4 Grade, Class and Type designation, if applicable:
4.1.5 Condition, if other than as-rolled: N/A
4.1.6 Quantity (weight [mass] or number of pieces): 80 FEET
4.1.7 Length: 20 lengths
4.1.8 Exclusion of either structural product produced from coil or structural product produced from an as-rolled structural product, if applicable: N/A
4.1.9 Heat treatment requirements: IAW SECTION 6. NOTE-2
4.1.10 Testing for fine austenitic grain size is not required. .
4.1.11 Mechanical property test report is required.
Test report for each heat supplied is required IAW spec paragraph 14.
4.1.12 Special packaging, marking, and loading for shipment requirements are to be per spec paragraph 19.3. MIL-STD-129
4.1.13 Supplementary requirements checked below apply:
S1. Vacuum Treatment NOT REQUIRED S2. Product Analysis NOT REQUIRED S3. Simulated Post-Weld Heat Treatment of Mechanical Test Coupons
NOT REQUIRED
S4. Additional Tension Test NOT REQUIRED S5. Charpy V-Notch Impact Test NOT REQUIRED S6. Drop-Weight Test (for Material 0.625 in. [16 mm] and over in Thickness)
NOT REQUIRED
S8. Ultrasonic Examination NOT REQUIRED S15. Reduction of Area Measurement NOT REQUIRED S18. Maximum Tensile Strength NOT REQUIRED
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
MATERIAL ORDERING DATA
ASTM-A6/A6M
S23. Copper-Bearing Steel (for improved atmospheric corrosion resistance)
NOT REQUIRED
S26. Subdivided Material—Marking of Individual Pieces NOT REQUIRED S27. Restrictive Plate Flatness NOT REQUIRED S28. Fine Grain Practice NOT REQUIRED S29. Fine Austenitic Grain Size NOT REQUIRED S30. Charpy V-Notch Impact Test for Structural Shapes: Alternate Core Location
NOT REQUIRED
S31. Maximum Carbon Equivalent for Weldability NOT REQUIRED S32. Single Heat Bundles NOT REQUIRED
4.1.14 End use, if there are any end-use-specific requirements: N/A
4.1.15 Special requirements, if any: N/A
4.1.16 Repair welding requirements, if any: IAW SECTION 9.5
Additional data requirements: All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129. Refer to DLA Procurement Note C20 for further instructions.
Prepared By:
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
DEJ0023
Highlight
File details come from the government source that posted it. Updated .