3064_SPI.pdf
PDF 795 KB Posted
- Attached to
- REPAIR SERVICES FOR THE MUTES PROGRAM
- Solicitation number
- FA825026R0004
About this file
This is a Special Packaging Instruction (SPI) document for the Oscillating Group item (Part/Drawing No. PC-090EM-1, National Stock No. 5955-01-097-3064).
The document specifies military preservation and packaging requirements per MIL-STD-2073-1, with two serviceable and unserviceable methods both designated as Method 42. Level A packaging is required for the most severe worldwide shipment, handling, and storage conditions, including war reserve material, mobilization, strategic and theater deployment, and open storage situations. Level B packaging provides standard protection and may be used for security assistance items unless otherwise directed by the procuring country. The packaging utilizes an interior container (Level B) measuring 27" x 16" x 19" and an exterior Level A container measuring 30" x 19" x 22 1/4". Gross dimensions are 7.339 cubic feet and 86 pounds for Level A, with design fragility rating G. Closure follows IAW MIL-STD-129 marking standards with specified SPI number identification on the container. The packaging bill of materials includes tape, sleeves, fasteners (hex nuts and washers), separators, bases, cushioning materials, barriers, and wooden containers constructed from debarked, heat-treated wood per International Standards for Phytosanitary Measures (ISPM No. 15) requirements. All items must be mounted to the base with a separator positioned between the item and base. The document is controlled by 406 SCMS at Gulfstream Army Logistics Center, Hill Air Force Base, and marked as Controlled Unclassified Information with distribution limited to federal contractors.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| TRNSPDATA_REPORT.pdf | ||
| SQSR.pdf | ||
| 3064_SQSR.pdf | ||
| 3064_UIIEC_REPORT.pdf | ||
| SOW.pdf | ||
| 6222_RDL_REPORT.pdf | ||
| FA825026R0004.pdf | ||
| 6222_SQSR.pdf | ||
| 6222_ITMDESC_REPORT.pdf | ||
| 6223_ITMDESC_REPORT.pdf | ||
| PKGRQMT_REPORT.pdf | ||
| 6222_UIIEC_REPORT.pdf | ||
| 6223_UIIEC_REPORT.pdf | ||
| 3064_RDL_REPORT.pdf | ||
| CAVAF.pdf | ||
| PWS.pdf | ||
| 6223_RDL_REPORT.pdf | ||
| CDRLS.pdf | ||
| 3064_ITMDESC_REPORT.pdf | ||
| FA825026R000400001.pdf |
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
CUI
CAUTION NOTICES
NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH THE PREVIOUS EDITION OF THIS SPI DO NOT REQUIRE
REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073-1, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.
NOTICE 4: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.
NOTICE 5: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
NOTES
1. MOUNT ITEM TO BASE, REF.-6 USING REF.--8, -9, AND -10. INSURE SEPARATOR, REF.-7, IS IN PLACE BETWEEN ITEM
AND BASE.
File details come from the government source that posted it. Updated .