300336 Solicitation Information Sheet.pdf

PDF 164 KB Posted

Attached to
Charter Oak Apartments Façade Repairs
Solicitation number
300336
Issued by
Connecticut

About this file

This is a Solicitation Information Sheet issued by the University of Connecticut for a Request for Qualifications (RFQ) to solicit Masonry Contractor services for the Charter Oak Apartments Facade Repairs project located at 916 Tower Ct Road, Storrs, Connecticut. The scope of work involves replacement of the rowlock water table, including removal of existing rowlock and wood trim, replacement of existing flashing, and replacement of rowlock brick with precast units. The RFQ was released on October 13, 2026, with a Questions and Answers due date of October 22, 2026 at 2:00 PM and a proposal due date of November 3, 2026 at 2:00 PM. The anticipated contract issuance and Notice to Proceed is January 31, 2027, with construction planned to commence on March 15, 2027 and an 18-week construction duration. Proposals must be submitted through the HuskyBuy Portal, and all requests for information must be posted on the Q&A Board Tab within the sourcing event.

Proposers must demonstrate financial ability and bonding capacity to complete a construction project with a minimum value of at least $950,000 and provide three examples of comparable masonry repair projects completed within the past ten years with a construction value of at least $600,000. If the lowest responsible bidder's cost proposal exceeds $1 million, the proposer must possess Department of Administrative Services prequalification in the Masonry classification. The University of Connecticut encourages participation from Small Business Enterprises (SBEs), Minority-Owned Businesses (MBEs), Women-Owned Businesses (WBEs), and businesses owned by persons with disabilities, all certified by Connecticut's Department of Administrative Services Supplier Diversity Division. The contractor will be required to perform not less than ten percent of the total contract price with its own forces and must demonstrate good faith efforts to meet project-specific spending allocation goals for SBE and MBE participation, with specific goals to be included in the subsequent Invitation to Bid phase. The procurement agent is Chris Peters at chris.peters@uconn.edu or 860-486-6324.

View the file

Other files

File Type Posted
300336_Oct_15_26_solicitation_doc.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Construction GC-Trade Per Project RFQ, March 2026 Page 1 of 3

SOLICITATION INFORMATION SHEET

CONSTRUCTION - GENERAL CONTRACTOR/TRADE CONTRACTOR

REQUEST FOR STATEMENT OF QUALIFICATIONS

The University of Connecticut is accepting Statement of Qualifications for:

RFQ RELEASE DATE: 10/13/2026

SOLICITATION NO.: 300336

PROJECT NAME: Charter Oak Apartments Façade Repairs

PROJECT LOCATION: 916 Tower Ct Road, Storrs, CT 06268

PROCUREMENT AGENT: Chris Peters, chris.peters@uconn.edu, 860-486-6324

INTENT OF THIS SOLICITATION: The purpose of this Request for Qualifications (“RFQ”) is to solicit

Masonry Contractor services for the Charter Oak Apartments Façade Repairs project.

LOCATION OF THIS SOLICITATION: Submit a Statement of Qualifications (“Proposal”) for this solicitation through the HuskyBuy Portal:

https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=UConnFullSuite.

SBE/MBE PARTICIPATION: The University of Connecticut is committed to providing a professionally inclusive environment within which small and minority businesses are encouraged to participate in the procurement experience. As such, we encourage participation by Small (SBE) businesses, Minority-Owned

(MBE) businesses, Woman-Owned (WBE) businesses, and businesses owned by persons with a disability

(DisBE), certified as such by the Connecticut’s Department of Administrative Services Supplier Diversity

Division. For further information, visit: https://portal.ct.gov/DAS/Services/Licensing-Certification-

Permitting-and-Codes/Small-Minority-Business-Center. To learn about the University of Connecticut’s

Supplier Diversity Program, visit: https://supplierdiversity.ubs.uconn.edu. Additionally, the University encourages Connecticut-based businesses to participate in this public solicitation process.

CRITICAL DATES:

Q&A (RFI) Due Date and Time 10/22/2026 2:00 PM

Proposal Due Date and Time 11/3/2026 2:00 PM

REQUEST FOR INFORMATION QUESTIONS: All Requests for Information (“RFI”) questions are to be posted under the Q&A Board Tab in the HuskyBuy sourcing event for this Solicitation. No phone calls or RFI questions emailed directly to the Procurement Agent will be accepted.

mailto:chris.peters@uconn.edu https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=UConnFullSuite https://portal.ct.gov/DAS/Services/Licensing-Certification-Permitting-and-Codes/Small-Minority-Business-Center https://portal.ct.gov/DAS/Services/Licensing-Certification-Permitting-and-Codes/Small-Minority-Business-Center https://supplierdiversity.ubs.uconn.edu/

Construction GC-Trade Per Project RFQ, March 2026 Page 2 of 3

CLARIFICATIONS, ADDENDA, and INTERPRETATIONS: Proposers shall promptly notify the University of any ambiguity, inconsistency, or error which they may discover upon examination of the contract documents.

Any and all interpretations of the RFI Responses, contract documents, and supplemental instructions, will be in the form of a clarification/addendum, and posted as part of the HuskyBuy sourcing event. Failure of a Proposer to receive such clarification/addendum or interpretation shall not release a Proposer from the obligations under its Proposal as submitted.

CONSIDERATION OF PROPOSALS: This is a two-part solicitation process. During the first part, a Proposer shall demonstrate, to the satisfaction of the University, that they possess the proven financial ability, managerial ability, technical ability, and the integrity, necessary to perform the Scope of Work faithfully and efficiently for this Project, without conflict of interest. Proposals shall be evaluated utilizing the objective technical criteria listed within the RFQ, as well as any additional information obtained from persons or other sources identified in the Proposal with the intent of developing a shortlist of qualified

Proposers.

During the second part of the process, the short-listed Proposers are invited to submit a Cost Proposal during the Invitation to Bid phase. The Cost Proposals are opened during a public opening and the lowest responsible Bidder is determined after review of the submissions.

PROJECT SCHEDULE/DURATION:

Anticipated Contract Issuance/Notice to Proceed: January 31, 2027

Construction is planned to start: March 15, 2027

Construction Duration: 18 Weeks

PROJECT DESCRIPTION/SCOPE OF WORK: Replacement of the rowlock water table. Work to include but is not limited to; removal of existing rowlock and wood trim directly above rowlock, replacement of existing flashing and replacement of the rowlock brick with precast units.

QUALIFICATIONS OF PROPOSER: All Proposers must provide information/documentation with their submission that demonstrates the following:

- DAS CLASSIFICATION: If the lowest responsible vidder’s Cost Proposal is over $1M, the proposer must be prepared to present their Department of Administrative Services prequalification in the specified classification for this Project (Masonry) upon issuance of the Letter of Intent.

- FINANCIAL ABILITY: The Proposer must demonstrate the financial ability and bonding capacity to complete a construction project with a minimum value of at least $950,000. See the Financial Ability

Prequalification Requirements Document for further information.

- PREVIOUS RELEVANT EXPERIENCE: Describe the overall qualifications of the Proposer, including background in this field and the services that it provides. Utilize the Previous Relevant Experience Form, Const-RFQ/ITB provided with this RFQ.

a. It is recommended that the Proposer provide three (3) examples of projects that are in progress or completed within the past ten (10) years, comparable in size, scope, and similar environment to this

Project, with an emphasis on masonry repair.

Construction GC-Trade Per Project RFQ, March 2026 Page 3 of 3

b. It is recommended that the examples have a construction value of $600,000.

c. A detailed description of the work performed and how it relates to the Scope of Work outlined in the RFQ shall be included.

d. Projects with any information on the Form stated as “confidential” may not be considered.

- PROPOSED TEAM QUALIFICATIONS: The Proposer must demonstrate the ability to staff the Project with high quality, experienced personnel. Describe the qualifications and responsibilities of the key personnel who will be assigned to the Project including their experience on similar assignments and their specific responsibilities for the proposed Project. Utilize the Resume for Proposed Key Personnel, Const-RFQ/ITB provided with this RFQ.

a. It is recommended that the Proposer provide Resumes for the following positions: Project

Superintendent and Project Manager. Only provide Resumes for the key project team; do not include Resumes for personnel not assigned to the team.

MISCELLANEOUS REQUIRED DOCUMENTS: The Proposal shall include the following documents:

1. Supplier Diversity Certificate: If certified, provide your Company’s current Supplier Diversity Certificate issued by the Connecticut Department of Administrative Services.

CONTRACT: A draft of the contract has been provided with the solicitation documents. The University reserves the right to modify the contract or waive any informality as it deems to be in the best interest of the University. By submitting a Proposal, your Company accepts the contract and any modifications that the University deems necessary to it without exception. Proposers will be notified of any modifications to the contract made by the University. Any exceptions to the contract submitted by the Proposer will not be considered.

SELF-PERFORMANCE REQUIREMENT: If awarded this contract, the Contractor shall be required to perform not less than ten percent (10%) of the Total Contract Price with its own forces.

GOOD FAITH EFFORTS PLAN: This project will have project-specific spending allocation goals for Small

Business Enterprises (“SBEs”) and Minority Business Enterprises (“MBEs”) participation. The information will be included in the subsequent Invitation to Bid phase, and the selected contractor must demonstrate good faith effort to meet those goals. If the contractor is an S/MBE, then any self-performed work may be included in the spending allocation goal for the project. The Contractor is responsible for ensuring that they, and the S/MBEs they have selected, are eligible Connecticut-certified S/MBE contractors.

End of Solicitation Information Sheet

File details come from the government source that posted it. Updated .