3-RFQt-03-Specifications.pdf
PDF 253 KB Posted
- Attached to
- RFQt Energy Audit & Weatherization Equipment
- Solicitation number
- 27-0027
- Issued by
- Tarrant County, Texas
About this file
This specification document is for a Request for Quote (RFQt) issued by the City of Fort Worth Purchasing Division for energy audit and weatherization equipment to support the Neighborhood Services Department on an as-needed basis. The solicitation requests quotes for equipment used to perform energy audits on single and multi-family residential dwellings, including blower door kits, duct blaster kits, and related testing equipment. The City recommends Minneapolis brand equipment from The Energy Conservatory (TEC) but will consider equal brand alternatives with appropriate justification. Key specifications include a Blower Door Fan with maximum flow of 6,300 CFM at 110V/60Hz, a Duct Blaster Fan with maximum flow of 1,550 CFM, digital gauge meters (DG-1000 and DG-8), pressure pans, and duct masking tape. The initial contract term is one year with the option to renew for up to four additional one-year periods with 90 days' notice of non-renewal required. Products must be delivered within seven calendar days of purchase order receipt to 818 Missouri Ave, Suite 245, Fort Worth, TX 76104, during business hours Monday through Friday, excluding City-observed holidays.
Bidders must have a valid System for Award Management (SAM) registration and a minimum of three years of experience providing energy audit and weatherization products and equipment. The procurement is subject to Department of Energy Bipartisan Infrastructure Law and Low Income Home Energy Assistance Program requirements. Quotes will be evaluated based on the lowest responsive and responsible bidder, with the City reserving the right to make multiple awards or reject any or all bids. All pricing must be firm for the contract term and include freight and delivery costs. Successful vendors are required to register for direct deposit payments prior to providing goods or services. Payment terms are Net 30 Days, with invoices submitted electronically to the City's centralized Accounts Payable department. This solicitation is subject to the City's Small Business Program under Ordinance No. 27832-08-2025. Price adjustments may be requested annually at contract renewal with at least 60 days' notice and documented proof of cost increases, subject to City approval.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 2-RFQt-01-Forms.pdf | ||
| 1-RFQt-02-Standard Purchasing Terms and Conditions.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CITY OF FORT WORTH - PURCHASING DIVISION
SPECIFICATIONS
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 1 of 14
RFQt Title: Energy Audit & Weatherization Equipment
1. INTRODUCTION
The City of Fort Worth (City) is requesting quotes from qualified bidders to establish an agreement to provide energy audit and weatherization equipment on an as-needed basis for the Neighborhood Services Department. This is an informal solicitation and does not commit the City to award a contract or pay any cost incurred in preparing a response.
2. BACKGROUND
This equipment is used by the Neighborhood Services Department to perform energy audits on single and multi-family homes. These audits assess what energy measures may be needed to meet weatherization guidelines. City staff will use this equipment for blower door, duct blaster, and vent fan tests on these residential dwellings.
3. MINIMUM REQUIREMENTS
3.1. Bidder must have a valid and active System for Award Management
(SAM) registration.
3.2. Bidder must have a minimum of three (3) years providing energy audit and/or weatherization products and equipment as a business.
4. SPECIFICATIONS
4.1. These purchases are subject to Department of Energy Bipartisan
Infrastructure Law and the Low Income Home Energy Assistance
Program requirements.
4.2. Department staff are trained in the operation and calibration of The
Energy Conservatory (TEC) MINNEAPOLIS brand meters and equipment; while the City will consider equal brand alternatives, the additional training and qualifications needed for alternative products will also be considered.
4.3. While information for the Model 3 is listed, the City reserves the right to adjust to more recent models throughout the term of the agreement if doing so is in the best interest of the City.
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 2 of 14
4.4. The awarded vendor shall provide an itemized quote within twenty-four (24) hours of request.
4.5. Additional related products of the same general category may be added throughout the term of the agreement.
4.6. REQUIREMENTS
4.6.1. Bidder must be able to provide all services and products listed; partial bids will not be accepted.
4.6.2. All materials supplied under the agreement resulting from this bid shall be of recent production, unused, and suitable for their intended purpose.
4.6.3. Any manufacturer’s warranty must be extended to the City.
5. PRODUCT SPECIFICATIONS:
Recommended Model and Brand: Minneapolis Blower Door TM Kit
Specifications:
5.1. Blower Door Fan:
5.1.1. Maximum Flow (110V/60Hz)
5.1.1.1. 6,300 CFM at free air (2,973 l/s, 10,700 m2/h)
5.1.1.2. 5,350 CFM at 50 Pa (2,524 l/s, 9,090 m3/h)
5.1.1.3. 4,900 CFM at 75 Pa (2,360 l/s, 8,495 m3/h)
5.1.2. Minimum Flow
5.1.2.1. 915 CFM with Ring A ( 432 l/s, 1555 m3/h)
5.1.2.2. 300 CFM with Ring B (141 l/s, 510 m3/h)
5.1.2.3. 85 CFM with Ring C (40 l/s, 144 m3/h)
5.1.2.4. 30 CFM with Ring D (14 l/s, 51 m3/h)
5.1.2.5. 11 CFM with Ring E (5 l/s, 18 m3/h)
5.1.3. Dimensions
5.1.3.1. 20-inch (50 cm) inlet diameter
5.1.3.2. 10.25-inch (25 cm) length
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 3 of 14
5.1.4. Weight: 33 lbs. (15 kg) with flow rings A and B
5.1.5. Flow Accuracy
5.1.5.1. +/- 3% with DG-1000 or DG-700
5.1.5.2. Rings D & E +/- 4% or 1 CFM
5.1.6. Power
5.1.6.1. 3/4 HP motor
5.1.6.2. 110 volt (50/60Hz)
5.1.6.3. 1000-watt maximum watt draw
5.2. Fan Speed Controller:
5.2.1. Power Requirements:
5.2.1.1. 100-120 Volt ∼13 Amp
5.2.1.2. 50 or 60 Hz
5.2.2. Case Material - Anodized Aluminum
5.2.3. Dimensions:
5.2.3.1. Case: 4.5 x 2.6 x 1.7 inch (WxHxL)
5.2.3.2. Power Cord Length: 12 feet
5.2.3.3. Fan Connect Cord Length: 9 feet 6 inch
5.2.4. Frame and Panel:
5.2.4.1. Frame Material - Extruded Aluminum
5.2.4.2. Width: 28 inches to 40 inches
5.2.4.3. Height: 52 inches to 96 inches
5.2.4.4. Seal: EFDM flexible gasket
5.2.4.5. Panel Material: Heavyweight coated nylon with
built-in vinyl window
5.3. DG-1000 Specifications:
5.3.1. Two Independent Pressure Channels
5.3.2. Pressure Range: -2,500 to +2,500 Pa (-10 to +10 in. H2O)
5.3.3. Display resolution
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 4 of 14
5.3.3.1. Pa for readings 0-999.9 Pa
5.3.3.2. Pa for readings 1000 Pa and larger
5.3.4. Accuracy at Typical Use Conditions: 0.9% of pressure
reading or 0.12 Pa, whichever is greater
5.3.5. Units of Measure:
5.3.5.1. Channel A – Pa, in w.c.
5.3.5.2. Channel B – Pa, in w.c., CFM, CFM@25, CFM@50, CFM@75, ACH50, CFM@25/ft2, CFM@25/100ft2, CFM@50/ft2, CFM@50/100 ft2, CFM@75/ft2, CFM@75/100 ft2 (flow units of l/s and m3/h also selectable)
5.3.6. Auto-zero: On start up and then once every 10 seconds. Tilt and motion compensation between auto-zeros.
5.3.7. Time Averaging: 1, 5, 10 seconds and long-term (continuous update)
5.3.8. Operating Temperature Range: 42 degrees F to 115 degrees F
5.3.9. Storage Temperature Range: -4 degrees F to 140 degrees F
5.3.10. Display: 480 x 272 pixels, 3.75 x 2.125 inches, capacitive touch screen
5.3.11. Display Backlight: user adjustable – default 40%
5.3.12. Power: two 18650 Lithium Ion batteries, replaceable, with
AC charger/power adaptor included.
5.3.13. Battery Life
5.3.13.1. Over 15 hours of continuous use with default
settings
5.3.13.2. 13 hours of continuous use with default settings and
Wi-Fi active
5.3.13.3. Use of Bluetooth does not significantly alter battery life of approximately 13 hours of operation.
5.3.14. Auto-Off: adjustable from 10 minutes to 2 hours
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 5 of 14
5.3.15. Languages Supported: English, German, Spanish, French, Italian, Norwegian, Dutch, Portuguese, Chinese
5.3.16. Dimensions: 7.0 x 4.2 x 1.4 inches
5.3.17. Weight: 15.7 oz
Recommended Model and Brand: Minneapolis Duct Blaster® Kit Specifications:
5.4. Duct Blaster® Fan:
5.4.1. Maximum Flow
5.4.1.1. 1,550 CFM at free air (731 l/s, 2,633 m3/h)
5.4.1.2. 1,450 CFM at 25 Pa (684 l/s, 2,463 m3/h)
5.4.1.3. 1,410 CFM at 50 Pa (665 l/s, 2,395 m3/h)
5.4.2. With Flex Duct Attached
5.4.2.1. 1,150 CFM at free air (542 l/s, 1,954 m3/h)
5.4.2.2. 1,075 CFM at 25 Pa (507 l/s, 1,826 m3/h)
5.4.2.3. 1,025 CFM at 50 Pa (483 l/s, 1,741 m3/h)
5.4.3. With Flex Duct, Ring 1, and Flow Conditioner
(depressurization) Attached
5.4.3.1. 750 CFM at free air (354 l/s, 1,274 m3/h)
5.4.3.2. 725 CFM at 25 Pa (342 l/s, 1,231 m3/h)
5.4.3.3. 700 CFM at 50 Pa (330 l/s, 1,189 m3/h)
5.4.4. Minimum Flow
5.4.4.1. 10 CFM with Ring 3 (5 l/s, 17 m3/h)
5.4.4.2. 2.4 CFM with Optional Ring 4 (1.1 l/s, 4 m3/h)
5.4.5. Fan Dimensions: 10 inches (25 cm) inlet diameter, 7 in (17.8
cm) length
5.4.6. Fan Weight
5.4.6.1. 7 lbs. (3.18 kg)
5.4.6.2. 8.5 lbs. (3.86 kg) with 3 flow rings
5.4.7. Flow Accuracy: ±3% with DG-1000
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 6 of 14
5.4.8. Power:
5.4.8.1. 100V-240V
5.4.8.2. 50 or 60Hz
5.4.8.3. 360 watt maximum watt draw
5.5. Fan Speed Controller:
5.5.1. Power Requirements:
5.5.1.1. 100-240V
5.5.1.2. 50 or 60 Hz
5.5.2. Case Material: Anodized Aluminum
5.5.3. Dimensions
5.5.3.1. Case: 4.4 x 4.1 x 1.6 inch (WxHxL)
5.5.3.2. Power Cord Length: 10 feet
5.5.3.3. Fan Connect Cord Length: 8 feet
5.6. DG-1000 Specifications:
5.6.1. Two Independent Pressure Channels
5.6.2. Pressure Range: -2,500 to +2,500 Pa (-10 to +10 in. H2O)
5.6.3. Display resolution
5.6.3.1. Pa for readings 0-999.9 Pa
5.6.3.2. Pa for readings 1000 Pa and larger
5.6.4. Accuracy at Typical Use Conditions: 0.9% of pressure
reading or 0.12 Pa, whichever is greater
5.6.5. Units of Measure
5.6.5.1. Channel A – Pa, in w.c.
5.6.5.2. Channel B – Pa, in w.c., CFM, CFM@25, CFM@50, CFM@75, ACH50, CFM@25/ft2, CFM@25/100ft2, CFM@50/ft2, CFM@50/100 ft2, CFM@75/ft2, CFM@75/100 ft2 (flow units of l/s and m3/h also selectable)
5.6.6. Auto-zero: on start up and then once every 10 seconds. Tilt
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 7 of 14 and motion compensation between auto-zeros.
5.6.7. Time Averaging: 1, 5, 10 seconds and long-term (continuous update)
5.6.8. Operating Temperature Range: 42 degrees F to 115 degrees F
5.6.9. Storage Temperature Range: -4 degrees F to 140 degrees F
5.6.10. Display: 480 x 272 pixels, 3.75 x 2.125 inches, capacitive touch screen
5.6.11. Display Backlight: user adjustable – default 40%
5.6.12. Power: two 18650 Lithium-Ion batteries, replaceable, with
AC charger/power adaptor included.
5.6.13. Battery Life
5.6.13.1. Over 15 hours of continuous use with default
settings
5.6.13.2. 13 hours of continuous use with default settings and
Wi-Fi active
5.6.13.3. Use of Bluetooth does not significantly alter battery life of approximately 13 hours of operation.
5.6.14. Auto-Off: adjustable from 10 minutes to 2 hours
5.6.15. Languages Supported: English, German, Spanish, French, Italian, Norwegian, Dutch, Portuguese, Chinese
5.6.16. Dimensions: 7.0 x 4.2 x 1.4 inches
5.6.17. Weight: 15.7 oz
5.7. DG-8 Specifications:
5.7.1. One Independent Pressure Channel
5.7.2. Digital Communication
5.7.2.1. Bluetooth Low Energy
5.7.2.2. USB 2.0 over USB-C® connection
5.7.3. Accuracy (1,2): 0.9% of pressure reading or 0.00048 in. H2O
(0.12 Pa), whichever is greater
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 8 of 14
5.7.4. Display Resolution
5.7.4.1. In. H2O 0.1 Pa for readings up to 999.9 Pa
5.7.4.2. Pa for readings over 1000 Pa
5.7.5. Pressure Range: -10 to +10 in. H2O (-2,500 to +2 ,500 Pa)
5.7.6. Units of Measure
5.7.6.1. Pa
5.7.6.2. in. H2O
5.7.7. Display
5.7.7.1. 2-inch diagonal
5.7.7.2. 320 x 240 pixels
5.7.7.3. Backlit color TFT LCD
5.7.8. Power
5.7.8.1. Lithium-Ion Polymer Rechargeable Battery 2,000
mAh
5.7.8.2. USB-C® charger/power adapter included
5.7.9. Battery Life: typically over 22 hours of continuous use
5.7.10. Auto-off: 30 minutes
5.7.11. Dimensions: 4.84 x 2.39 x 1.02 inches (123 x 61 x 26 mm)
5.7.12. Weight: 6.4 oz (182 g)
5.7.13. Recommended Calibration Interval: 48 months
5.7.14. Operating Temperature Range (3): 32° F to 115° F (0° C to
45° C)
5.7.15. Storage Temperature Range (4)
5.7.15.1. Less than one month: 15° F to 115° F (-10° C to 45°
C)
5.7.15.2. One month up to one year: 32° F to 77° F (0° C to
25° C
5.7.15.3. Typical Conditions are a temperature range of 54°
to 90° F, and a four year calibration interval.
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 9 of 14
5.7.15.4. As Calibrated Accuracy is +/- (0.4% of reading +
0.045 Pa) under controlled conditions of 67° to 77°
F, four month calibration interval, and pressure readings averaged for five seconds. All gauges are verified to meet this specification at all calibration pressures.
5.7.15.5. For use at temperature conditions outside the
typical conditions in Note 1, or the as-calibrated range in Note 2, add an additional 0.037% of pressure reading per degree F over the stated range.
5.7.15.6. Storage limits are based on batteries. Storing
outside these limits may require battery replacement.
5.8. Pressure Pan Specifications:
5.8.1. Pan Material: thermoformed ABS Plastic
5.8.2. Gasket Material: EPDM Rubber
5.8.3. Pressure Tap:
5.8.3.1. Black Nylon
5.8.3.2. For use with 1/8-inch ID flexible hose
5.8.4. Dimensions: 14.5 x 12.5 x 4.5 inch (WxHxD)
5.8.5. Weight: 1.5 lbs.
5.9. Premium DuckMask™ Specifications:
5.9.1. Width: 8 inches
5.9.2. Length: 200 feet per roll
5.9.3. Material thickness: mils (0.05 mm)
5.9.4. Perforations: inch intervals
5.9.5. Adhesive: acrylic-based
5.9.6. Weight: 17 lbs.
6. DELIVERY
6.1. All products shall be delivered to the following address:
6.1.1. 818 Missouri Ave, RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 10 of 14
Suite 245
Fort Worth, TX 76104
6.2. Item pricing shall include the cost of delivery.
6.3. The products shall be delivered between 8:00 a.m. to 4:00 p.m., Monday through Friday, unless otherwise requested by the
Neighborhood Services Department.
6.4. Vendor will deliver products within seven (7) calendar days after receipt of a Purchase Order. If the Vendor cannot meet this timeframe, the Vendor shall notify the City’s contact listed on the Purchase Order.
6.5. All shipments shall include a packing slip detailing the order information.
6.6. Receipts shall be emailed to the Department after payment is remitted.
6.7. The Vendor shall not deliver products on City-observed holidays.
6.7.1. City observed holidays include:
6.7.1.1. New Year’s Day
6.7.1.2. Martin Luther King Jr. Day
6.7.1.3. Memorial Day
6.7.1.4. Juneteenth
6.7.1.5. July 4th
6.7.1.6. Labor Day
6.7.1.7. Thanksgiving Thursday and the following Friday
6.7.1.8. Christmas Day
7. AGREEMENT TERM
The initial term of the agreement shall be one (1) year. Upon the expiration of the initial term, the agreement shall renew under the same terms and conditions for up to four (4) one-year renewal periods, unless City or Supplier provides the other party with notice of non-renewal at least 90 days before the expiration of the initial term or renewal periods. In the event no funds or insufficient funds are appropriated by
City in any fiscal period for any payments due hereunder, City will notify Vendor of such occurrence and the contract will terminate on the last day of the fiscal period
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 11 of 14 for which appropriations were received without penalty or expense to City of any kind whatsoever, except as to the portions of the payments herein agreed upon for which funds have been appropriated.
8. BRAND OR EQUAL
8.1. Any manufacturer’s names, trade names, brand names, information and/or catalog numbers listed in this specification are for information and not intended to limit competition unless otherwise indicated
Bidders may offer any brand for which he/she is an authorized representative, which meets or exceeds the bid specification for any item(s). If bids are based on equivalent products, indicate on the bid solicitation the manufacturer’s product name and reference number.
8.2. Bidders shall submit proposal, cuts, sketches, and descriptive literature, and/or complete specifications. Reference to literature submitted with a previous bid will not satisfy this provision. Bidders shall explain the reason(s) why the proposed equivalent will meet the specifications and not be considered an exception thereto. Bids which do not comply with these requirements are subject to rejection. Bids lacking any written indication of intent to bid an alternate brand will be received and considered incomplete.
8.3. The Senior Purchasing Manager or designee will evaluate “equal” products on the basis of information furnished by the bidder or identified in the bid and reasonably available to the Senior Purchasing
Manager. The Senior Purchasing Manager or designee is not responsible for locating or obtaining any information not identified in the offer.
8.4. Unless the bidder clearly indicates in its bid that the product being offered is an “equal” product, the bidder shall provide the brand name product referenced in the bid.
8.5. The City shall have the sole right to determine equal products.
9. METHOD OF AWARD
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 12 of 14
9.1. Quotes will be evaluated based on the lowest responsive and responsible bidder complying with all of the provisions of the solicitation, provided the bid price is reasonable, and it is in the best interest of the City to accept it.
9.1.1. A responsive bidder is defined to be one who submits a completed quote packet within the stated time deadline and in accordance with the specification.
9.1.2. A responsible bidder is defined to be one who demonstrates via responses to the selection criteria his/her ability to successfully deliver the supplies, equipment, or services being procured.
9.1.3. In order for the City to receive adequate coverage on its requirements as specified in the solicitation, the City reserves the right to make multiple awards.
9.1.4. The City reserves the right to accept or reject in whole or in part any or all bids received and to make an award on the basis of individual item, combination of items, or overall bid, as it is deemed in the best interest of the City. The City also reserves the right to reject the bid of a bidder who has previously failed to perform properly or complete on time agreements of a similar nature.
9.1.5. The City also reserves the right to reject the bid of a bidder who has previously failed to perform properly or complete on time agreements of a similar nature.
10. PRICE ADJUSTMENTS
10.1. Vendors that require that unit prices be adjusted for increases or decreases in Vendor’s cost during the contract period shall use the procedure listed below. Price adjustments may only be requested on an annual basis in conjunction with the contract’s renewal.
10.1.1. The Vendor must submit its price adjustment request, in writing, at least 60 days before the requested effective period. The Vendor shall provide written proof of cost increases with the price adjustment request and updated
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 13 of 14 pricing per line item.
10.1.2. If the City concludes that the rate increase being requested is unacceptable, the City reserves the right to adjust the rate request, or reject the rate request in its entirety and allow the contract to expire at the end of the contract term. If the City elects not to exercise the renewal option, the Purchasing
Division reserves the right to issue a new solicitation or procure the goods or services by any other allowable means.
10.1.3. Prices shall remain firm for the term of the Agreement and shall include all associated freight and delivery costs, unless otherwise specifically stated in writing and agreed to by
City.
10.1.4. Upon expiration of the contract term, the successful Vendor agrees to hold over under the same terms and conditions of the contract for a reasonable period of time to allow the city to re-solicitate an agreement, not to exceed ninety (90) days.
10.1.4.1. The provision of goods and/or services shall not be suspended by the Vendor except as expressly allowed by the contract’s terms and conditions.
11. QUANTITIES - The quantities listed on the bid table are only estimates based on previous usage and do not indicate intent to purchase or a guarantee of future business. The City of Fort Worth is obligated to pay for only those materials and services actually ordered by an authorized City employee and then received as required and accepted by the City.
12. SMALL BUSINESS PROGRAM - This solicitation is subject to the Small
Business Program, Ordinance No. 27832-08-2025 under Chapter 21 of the
Code of the City of Fort Worth. More information on the program can be found on the city’s website at: https://www.fortworthtexas.gov/news/2025/7/sbdp
13. INVOICES AND PAYMENTS
13.1. Registration - Successful Bidder(s) is required to register for direct deposit payments prior to providing goods and/or services using the forms posted on the City’s website at:
https://www.fortworthtexas.gov/news/2025/7/sbdp
RFQt Ref. #: 27-0027 Doc. Ref#: RFQt-03 Page 14 of 14 https://www.fortworthtexas.gov/departments/finance/purchasing/register
13.2. Payment – All payment terms shall be “Net 30 Days” unless specified in the bid and agreed in the City.
13.3. Invoices – The Vendor shall send invoices electronically to the City’s centralized Accounts Payable department invoice email address:
supplierinvoices@fortworthtexas.gov
13.3.1. Please include the following on the subject line of your email:
Supplier name, Invoice number, and PO number, separated by an underscore (ex: Example, Inc._123456_FW013-
0000001234)
13.3.2. This email address is not monitored so please do not send correspondence to this email. If Vendor has any invoice questions, please contact the City Department ordering the goods/services or Central Accounts Payable at 817-392-2451 or by email at:
Zz_FIN_AccountsPayable@fortworthtexas.gov
14. QUOTE SUBMISSION INSTRUCTIONS
14.1. A quote may be deemed non-responsive and may be disqualified, at the
City’s discretion, if the bid submittal fails to comply with the following instructions.
14.2. Bidder shall submit the following items:
14.2.1. Completed RFQt-01 Forms
14.2.2. Completed Bid Table (BT-67BL)
14.2.3. Small Business Enterprise Certificate, if applicable.
https://www.fortworthtexas.gov/departments/finance/purchasing/register mailto:supplierinvoices@fortworthtexas.gov mailto:Zz_FIN_AccountsPayable@fortworthtexas.gov
File details come from the government source that posted it. Updated .