3.Appendix-B.pdf
PDF 313 KB Posted
- Solicitation number
- 2140682
- Issued by
- Albany County, Albany City, New York
About this file
Appendix B is a comprehensive terms and conditions document issued by the New York State Office of Temporary and Disability Assistance (OTDA) that establishes the standard contractual framework for all state procurement agreements. This appendix encompasses general procurement requirements, bid submission procedures, bid evaluation criteria, and detailed terms governing the performance and administration of contracts. The document applies to the provision of Planned Preventative Maintenance and repair services for HVAC equipment at three separate OTDA facilities located in Albany, Buffalo, and Endicott, New York. OTDA is seeking qualified contractors to enter into a two-year agreement for quarterly preventative maintenance and priority hourly-rate repair services. The RFQ allows contractors to bid on one, multiple, or all three locations, with each location to be awarded separately to the responsible bidder with the lowest price. An optional site visit is offered to interested bidders, and all responses must include completed bid forms, certificates of insurance, proof of workers' compensation and disability insurance, and required certifications.
Pricing must be submitted in United States dollars on a net basis, including all transportation, delivery, and other associated costs. The contract terms include prevailing wage rate compliance for any applicable public works or building services; price decreases will automatically apply if OTDA's GSA schedule pricing or commercial price lists decrease during the contract term. Contractors must maintain comprehensive insurance coverage and comply with all New York State ethics, security, and legal requirements. The contractor assumes full liability for product/service performance, including comprehensive warranties covering defects in materials and workmanship for the manufacturer's standard warranty period or one year from acceptance, whichever is longer, with extended warranty periods for downtime. OTDA reserves broad procurement rights, including rejection of any bids, termination for cause or convenience with sixty days' notice, and the right to procure replacement services from alternative sources if contractor performance is inadequate. No guarantee of quantity is implied in indefinite delivery/indefinite quantity contracts, and disputes are resolved through OTDA's established informal and formal dispute resolution procedures.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
August 2025
Appendix B OTDA Terms and Conditions
Appendix B 2
Contents
General
1. Ethics Compliance
2. Definitions
Bid Submission
3. Bid Submission
4. Article 6-A of the Public Officers Law
5. Prevailing Wage Rates - Public Works and Building Services Contracts . 8
6. Taxes
7. Expenses Prior to Contract Execution
8. Product References
9. Remanufactured, Recycled, Recyclable, or Recovered Materials
10. Products Manufactured in Public Institutions
11. Pricing
12. Site Inspection
Bid Evaluation
13. Bid Evaluation
14. Quantity Changes Prior to Award
15. Timeframe for Offers
16. Debriefings
17. Contract Publicity
Terms and Conditions
18. Procurement Rights
19. Contract Effective
20. Official Use Only/No Personal Use
21. Modification of Contract Terms
22. Scope Changes
23. Estimated/Specific Quantity Contracts
24. Emergency Contracts
25. Product Delivery
26. Title and Risk of Loss for Products Other Than Technology Products .. 15
27. Product Substitution
28. Rejected Product
29. Installation
30. Repaired or Replaced Products, Parts, or Components
31. Staff
32. Assignment
33. Subcontractors
34. Suspension of Work
35. Termination
36. Savings/Force Majeure
37. Remedies for Breach
38. Assignment of Claim
Appendix B 3
39. Toxic Substances
40. Independent Contractor
41. Security
42. Cooperation with Third Parties
43. Warranties
44. Legal Compliance
45. Indemnification
46. Indemnification Relating to Infringement
47. Limitation of Liability
48. Dispute Resolution Procedures
49. Procedure for Protests/Appeals of Bid Specifications
50. Responsibility Terms
51. Conflicts of Interest
52. Transition
53. No Third-Party Beneficiaries
54. No Presumption Against Drafter
55. No Conflict
56. Availability of OTDA Resources
57. Ownership/Title/License to Existing/Custom/Licensed Material
58. Product Acceptance
59. No Hardstop or Passive License Monitoring
60. Changes to Product or Service Offerings
61. Federal Procurement Clauses
Appendix B 4
The Terms and Conditions set forth in this Appendix B are made part of the Agreement between OTDA and the Contractor.
General
1. Ethics Compliance
All Bidders/Contractors and their employees must comply with the requirements of Sections 73 and 74 of the Public Officers Law, other State codes, rules, regulations and executive orders establishing ethical standards for the conduct of business with New York State. In signing the Bid, Bidder certifies full compliance with those provisions for any present or future dealings, transactions, sales, contracts, services, offers, relationships, etc., involving New York State and/or its employees. Failure to comply with those provisions may result in disqualification from the bidding process, termination of contract, and/or other civil or criminal proceedings as required by law.
Contractors, consultants, vendors, and subcontractors may hire former State agency, OTDA or State authority employees. However, as a general rule and in accordance with New York Public Officers Law, former employees of OTDA may neither appear nor practice before OTDA, nor receive compensation for services rendered on a matter before OTDA, for a period of two years following their separation from OTDA service. In addition, former State and OTDA employees are subject to a “lifetime bar” from appearing before OTDA or receiving compensation for services regarding any transaction in which they personally participated, or which was under their active consideration during their tenure with the State or OTDA. The Offeror shall identify and provide OTDA with notice of any/all employees of the Offeror and its subcontractors who are former employees of the State, who will be assigned to perform services under an Agreement, resulting from this Solicitation, by completing the Offeror’s Disclosure of Former State Employees form included in (Appendix E), as part of their bid proposal.
2. Definitions In addition to the defined terms in “Appendix G - the Glossary” the terms used in the Agreement shall also include the following:
a. Administrative Proposal means the administrative portion of an Offeror’s
Proposal.
b. Attorney General or AG means the Attorney General of the State of New
York.
c. Bid or Proposal means a response to the Solicitation submitted by a Bidder to provide Products.
d. Bid Specifications means a written description drafted by OTDA setting forth the specific terms of the intended procurement, which may include: physical or functional characteristics, the nature of a Product, any description of the work to be performed, Products to be provided, the necessary qualifications of the Bidder, the capacity and capability of the Bidder to successfully carry
Appendix B 5 out the proposed Contract, or the process for achieving specific results and/or anticipated outcomes or any other requirement necessary to perform work.
e. Bidder, Offeror, or Proposer means any person or entity who submits a Bid in response to the Solicitation. At the time that a Bidder executes a Contract with OTDA, the Bidder shall become a “Contractor.”
f. Specifications mean the requirements and terms and conditions set forth in the negotiated Agreement including the Scope of Work.
g. Business Day means any day which is neither a Saturday, Sunday, nor an official New York State or federal holiday.
h. Contract or Agreement means the writings that contain the agreement of OTDA and the Contractor setting forth the total legal obligation between the parties, as determined by applicable laws and regulations.
i. Contractor means the legal entity which enters into the Contract to perform the Services.
j. Commodities means material goods, supplies, products, construction items or other standard articles of commerce (other than technology and services) that are the subject of any purchase or exchange.
k. Documentation means the complete set of manuals (e.g., user, installation, instructions or diagnostic manuals) in either hard or electronic copy, that are necessary to enable OTDA to properly test, install, operate and enjoy full use of the Product.
l. Financial Proposal means the financial portion of a Proposal.
m. Invitation for Bids or IFB means a type of Solicitation that is most typically used for procurements where requirements can be stated, and award will be made based on lowest price to the responsive and responsible Bidder or Bidders.
n. OSC means the New York State Office of the Comptroller.
o. OTDA means the New York State Office of Temporary and Disability
Assistance.
p. Proposal means a response to the Solicitation submitted by a Bidder to provide Products.
q. Product(s) means all items or deliverables under this Contract which includes Commodities, Services and/or Technology, as applicable.
r. Request for Proposals or RFP means a type of Solicitation that is used for procurements where factors in addition to cost are considered and weighted in awarding the contract and where the award will be made based on “best value,” as defined by the State Finance Law, to one or more responsive and responsible Bidders, and as identified more specifically in the RFP issued herein (if any).
s. Request for Quotation or RFQ means a procurement method that can be
Appendix B 6 used in situations such as single source, or emergency purchases.
t. Responsible Bidder means a Bidder that is determined to have financial and organizational capacity, legal authority, satisfactory previous performance, skill, judgment and integrity, and that is found to be competent, reliable and experienced, as determined by OTDA. For purposes of being deemed responsible, a Bidder must also be determined to be in compliance with Sections 139-j and 139-k of the State Finance Law relative to restrictions on contacts during the procurement process and disclosure of contacts and prior findings of non-responsibility under these statutes.
u. Responsive Bidder means a Bidder meeting the material specifications and requirements set forth in the Solicitation, as determined by OTDA.
v. Services means the performance of a task or tasks (including all tasks) as described in the Agreement.
w. Single Source means a procurement where two or more Bidders can supply the required Product, and OTDA may award the contract to one Bidder over the other.
x. Site means the location (street address) where Product will be delivered or executed.
y. Sole Source means a procurement where only one Bidder is capable of supplying the required Product.
z. Solicitation means writings by OTDA setting forth the scope, terms, conditions and technical specifications for a procurement of Product. Such writings typically include but are not limited to: Invitation for Bids (IFB), Request for Quotations (RFQ), Request for Proposals (RFP), addenda or amendments thereto, and terms and conditions that are incorporated by reference, including but not limited to Appendix A (Standard Clauses for NYS Contracts), Appendix B (General Specifications), and identified attachments.
Where the procurement is undertaken on a non-competitive basis, the term “Solicitation” shall be deemed to refer to all the terms and conditions identified in the Contract.
aa. State means the State of New York.
bb.Subcontractor means any individual or legal entity (including but not limited to sole proprietor, partnership, limited liability company, firm or corporation) who has entered into a contract, express or implied, for the performance of a portion of the Contract with the Contractor.
cc. Submission Date means the date on which Proposals are due to OTDA.
dd.Technical Proposal means the technical portion of a Bidder’s Bid Proposal.
ee. Technology means a good, either new or used, or service, or a combination thereof, used in the application of any computer or electronic information or interconnected system that is used in the acquisition, storage, manipulation, management, movement, control, display, switching, interchange, Appendix B 7 transmission, or reception of data or voice including, but not limited to, hardware, software, information appliances, firmware, programs, systems, networks, infrastructure, media, and related material used to automatically and electronically collect, receive, access, transmit, display, store, record, retrieve, analyze, evaluate, process, classify, manipulate, manage, assimilate, control, communicate, exchange, convert, coverage, interface, switch, or disseminate data of any kind or form, and shall include all associated consulting, management, facilities, maintenance and training.
Bid Submission
3. Bid Submission
a. Bidding All Bids, including all information required by the RFP or provided as explanation thereof, shall be submitted in English. All prices shall be expressed, and all payments shall be made, in United States Dollars (US$).
Any Bids submitted which do not meet the above criteria may be rejected.
b. Bid Opening Bids may, as applicable, be opened publicly. OTDA reserves the right at any time to postpone or cancel a scheduled Bid opening.
c. Late Bids Bids must be received at the location designated in the Solicitation at or before the date and time established in the Solicitation for the receipt of Bids.
Any Bid received at the designated location after the established time will be considered a Late Bid. A Late Bid may be rejected and disqualified from award.
Notwithstanding the foregoing, a Late Bid may be accepted in OTDA’s sole discretion where (i) no timely Bids meeting the requirements of the Solicitation are received, (ii) in the case of a multiple award, an insufficient number of timely Bids are received to satisfy the multiple award, or (iii) the Bidder has demonstrated to the satisfaction of OTDA that the Late Bid was caused solely by factors outside the control of the Bidder. Furthermore, OTDA may choose to accept a Late Bid if OTDA determines, in its sole discretion, that doing so is in the best interests of the State. However, in no event shall OTDA be under any obligation to accept a Late Bid.
4. Article 6-A of the Public Officers Law As applicable, this Contract is subject to Article 6-A of the Public Officers Law.
All Proposals shall become the property of OTDA and may be disclosed or used by OTDA to the extent permitted by law. OTDA may disclose a Proposal to any person for the purpose of assisting in evaluating the Proposal or for any other lawful purpose.
All proposals are subject to disclosure in accordance with the requirements of the Freedom of Information Law (“FOIL”). Accordingly, upon submission of the proposal, Proposer is encouraged to clearly and specifically indicate any portion of the proposal it asserts to be a trade secret or the disclosure of which would cause substantial injury to the Proposer’s competitive position and submit a written statement of the necessity for protective treatment by the State. Blanket
Appendix B 8 assertions are insufficient. Upon receipt of a FOIL request for such records, the State will grant or deny access in accordance with the law.
If this Contract is executed for the operation of a system of records, or for research, evaluation or reporting, by OTDA or on its behalf, then Contractor shall be subject to and comply with the requirements of Public Officers Law § 94.
5. Prevailing Wage Rates - Public Works and Building Services Contracts If any portion of work being solicited is subject to the prevailing wage rate provisions of the Labor Law, then this Section shall apply:
a. Prevailing Wage Rate Applicable to Bids A copy of the applicable prevailing wage rate schedule is incorporated into the Solicitation and may also be obtained by visiting www.labor.ny.gov and typing in the search box:
Prevailing Wage Schedule Request. Bidders must submit Bids which are based upon the prevailing hourly wages, and supplements in cash or equivalent benefits (e.g., fringe benefits and any cash or non-cash compensation which are not wages, as defined by law) that equal or exceed the applicable prevailing wage rates for the location where the work is to be performed. Bidders may not submit Bids based upon hourly wage rates and supplements below the applicable prevailing wage rates as established by the New York State Department of Labor. Bids that fail to comply with this requirement will be disqualified.
b. Wage Rate Payments/Changes During Contract Term The wages to be paid under any resulting Contract shall not be less than the prevailing rate of wages and supplements as set forth by law. It is required that the Contractor keep informed of all changes in the prevailing wage rates during the Contract term that apply to the classes of individuals supplied by the Contractor on any projects resulting from this Contract, subject to the provisions of the Labor Law. Contractor is solely liable for and must pay such required prevailing wage adjustments during the Contract term for its employees as required by law and is responsible for ensuring any Subcontractors utilized on the Contract also comply with the prevailing wage provisions of the New York State Labor Law.
c. Article 8 Construction/Public Works Contracts In compliance with Article 8, Section 220 of the New York State Labor Law:
i. Posting The Contractor must publicly post on the work Site, in a prominent and accessible place, a legible schedule of the prevailing wage rates and supplements.
ii. Payroll Records Contractors and Subcontractors must keep original payrolls or transcripts subscribed and affirmed as true under the penalties of perjury as required by law. For public works contracts over $25,000 where the Contractor maintains no regular place of business in the State, such records must be kept at the work Site. For building services contracts, such records must be kept at the work Site while work is being http://www.labor.ny.gov/
Appendix B 9 performed.
iii. Submission of Certified Payroll Transcripts for Public Works
Contracts Only Contractors and Subcontractors on public works Contracts must submit monthly payroll transcripts to OTDA issuing the Purchase Order for the work. This provision does not apply to Article 9 of the Labor Law building services contracts.
iv. Day’s Labor No laborers, workmen or mechanics in the employ of the Contractor, Subcontractor or other person doing or contracting to do all or part of the work contemplated by the Contract shall be permitted or required to work more than eight hours in any one calendar day or more than 5 calendar days in any one week except in cases of extraordinary emergency including fire, flood or danger to life or property. “Extraordinary emergency” shall be deemed to include situations in which sufficient laborers, workers and mechanics cannot be employed to carry on public work expeditiously as a result of such restrictions upon the number of hours and days of labor and the immediate commencement or prosecution or completion without undue delay of the public work is necessary in the judgment of the NYS Commissioner of Labor for the preservation of the Contract Site or for the protection of the life and limb of the persons using the Contract Site.
d. Article 9 Building Services Contracts In compliance with Article 9, Section 230 of the New York State Labor Law:
i. Payroll Records Contractors and Subcontractors must keep original payrolls or transcripts subscribed and affirmed as true under the penalties of perjury as required by law. Where the Contractor or Subcontractor maintains no regular place of business in New York State, such records must be kept at the work Site while work is being performed.
ii. Overtime Employees of Contractors and Subcontractors who work in excess of eight hours in a day or forty hours in a week shall be paid at the overtime rate identified by the New York State Department of Labor.
6. Taxes
a. Unless otherwise specified in the Solicitation, Bid Specifications or Contract, the quoted Bid price includes all taxes applicable to the transaction.
b. Purchases made by the State of New York are exempt from New York State and local sales taxes and, with certain exceptions, federal excise taxes. To satisfy the requirements of the New York State sales tax exemption, either the Purchase Order issued by a State Agency, or the invoice forwarded to authorize payment for such purchases will be sufficient evidence that the sale by the Contractor was made to the State, an exempt organization under Section 1116(a)(1) of the Tax Law.
7. Expenses Prior to Contract Execution OTDA is not liable for any costs incurred by a Bidder or Contractor in the
Appendix B 10 preparation and production of a Bid.
8. Product References
a. “Or Equal” In all Solicitations or Bid Specifications, the words “or equal” are understood to apply where a copyrighted, brand name, trade name, catalog reference, or patented Product is referenced. References to such specific Product are intended as descriptive, not restrictive, unless otherwise stated.
Comparable Product will be considered if proof of compatibility is provided, including appropriate catalog excerpts, descriptive literature, specifications and test data, etc. OTDA’s decision as to acceptance of the Product as equal shall be final.
b. Discrepancies in References In the event of a discrepancy between the model number referenced in the Solicitation or Bid Specifications and the written description of the Products that cannot be reconciled, then the written description shall prevail.
9. Remanufactured, Recycled, Recyclable, or Recovered Materials Upon the conditions specified in the Solicitation and in accordance with the laws of the State of New York, Contractors are encouraged to use recycled, recyclable, or recovered materials in the manufacture of Products and packaging to the maximum extent practicable without jeopardizing the performance or intended end use of the Product or packaging unless such use is precluded due to health, welfare, safety requirements, or in the Solicitation. Contractors are further encouraged to offer remanufactured Products to the maximum extent practicable without jeopardizing the performance or intended end use of the Product unless such use is precluded due to health, welfare, safety requirements, or by the Solicitation. Where such use is not practical, suitable, or permitted by the Solicitation, Contractor shall deliver new materials in accordance with the “Warranties” set forth below.
Items with recycled, recyclable, recovered, refurbished, or remanufactured content must be identified in the Bid or Bidder will be deemed to be offering new Product.
10. Products Manufactured in Public Institutions Bids offering Products that are manufactured or produced in public institutions will be rejected.
11. Pricing
a. Unit Pricing If required by the Solicitation, the Bidder should insert the price per unit specified, for each item unless otherwise specified in the Solicitation.
b. Net Pricing Unless otherwise required by the Solicitation, prices shall be net, including transportation, travel, customs, tariff, delivery and other charges fully prepaid by the Contractor to the destination indicated in the Solicitation.
c. “No Charge” Bid When Bids are requested on a number of Products as a lot, a Bidder desiring to Bid “no charge” on a Product in the lot must clearly
Appendix B 11 indicate such. Otherwise, such Bid may be considered incomplete and be rejected, in whole or in part, at the discretion of OTDA.
d. Specific price decreases:
i. GSA Changes: Where net pricing under the Contract is based on an approved General Services Administration (GSA) schedule, price decreases shall take effect automatically during the Contract term and apply to on or after the date the approved GSA schedule pricing decreases during the Contract term; or
ii. Commercial Price List Reductions: Where net pricing under the Contract is based on a discount from Contractor’s list prices, price decreases shall take effect automatically during the Contract term and apply to on or after the date Contractor lowers its pricing on its commercial price lists during the Contract term; or
iii. Special Offers/Promotions Generally: Where Contractor generally offers more advantageous special price promotions or special discount pricing to other customers during the Contract term for a similar quantity, and the maximum price or discount associated with such offer or promotion is better than the discount or net pricing otherwise available under this Contract, such better price or discount shall apply for similar quantity transactions under this Contract for the life of such general offer or promotion; and
iv. Special Offers/Promotions to Authorized Users: Contractor may offer other State agencies under another contracting vehicle, competitive pricing which is lower than the net pricing set forth herein at any time during the Contract term and such lower pricing shall not be applied as a global price reduction under the Contract pursuant to the foregoing paragraph (iii).
Unless otherwise specified in the Solicitation, Contractor may offer lower prices or better terms (see Modification of Contract Terms) on any specific purchase order from another State agency without being in conflict with, or having any obligation to comply on a global basis with, the terms of this clause.
e. Cost Proposal Revisions A Contractor may be solicited prior to Contract award to propose the best possible offer for the Product being bid on, in accordance with State Finance Law Section 163(9)(c). A cost proposal revision must be a lower price than the initial price.
12. Site Inspection Where a Site inspection is required, Bidder shall be required to inspect the Site, including environmental or other conditions, for pre-existing deficiencies that may affect the installed Product or that may affect Bidder’s ability to properly deliver, install or otherwise provide the required Product. All inquiries regarding such conditions shall be made in writing. Bidder shall be deemed to have knowledge
Appendix B 12 of any deficiencies or conditions that such inspection or inquiry might have disclosed. Bidder must provide a detailed explanation with its Bid if additional work is required under this clause in order to properly provide the required Product.
Bid Evaluation
13. Bid Evaluation
OTDA reserves the right to accept or reject any and all Bids, or separable portions of Bids, and waive technicalities, irregularities, and omissions if OTDA determines the best interests of the State will be served. OTDA, in its sole discretion, may accept or reject illegible, incomplete or vague Bids. Bid evaluation criteria for a Solicitation is set forth therein.
In the event two Bids are found to be substantially equivalent, price shall be the basis for determining the award recipient. If two or more Bidders submit substantially equivalent Bids as to pricing, OTDA may determine another criterion to evaluate tie bids.
14. Quantity Changes Prior to Award OTDA reserves the right, at any time prior to the award of a specific quantity Contract, to alter in good faith the quantities listed in the Solicitation. In the event such right is exercised, the lowest responsible Bidder meeting the Solicitation requirements will be advised of the revised quantities and afforded an opportunity to extend or reduce its Bid price in relation to the changed quantities. Refusal by the low Bidder to so extend or reduce its Bid price may result in the rejection of its Bid and the award of such Contract to the lowest responsible Bidder who accepts the revised qualifications.
15. Timeframe for Offers Bids must remain firm for 365 days, or such other period set forth in a Solicitation, from the date the Bid is due in the Solicitation.
16. Debriefings Pursuant to Section 163(9)(c) of the State Finance Law, any unsuccessful Bidder may request a debriefing regarding the reasons that the Bid submitted by the Bidder was not selected for award. Requests for a debriefing must be made within 15 calendar days of notification by OTDA that the Bid submitted by the Bidder was not selected for award. Requests should be submitted in writing to a designated contact identified in the Solicitation.
17. Contract Publicity Any Contractor press or media releases, advertisements, or promotional literature, regardless of the medium, referring to an awarded or other information of any kind regarding the Contract must be reviewed and approved by OTDA prior to public issuance. No presentation shall be given by the Contractor regarding the Contract without the prior written approval of OTDA. In addition, Contractor shall not use, for any purpose, the New York State of Opportunity
Appendix B 13 registered trademark or the New York State coat of arms without prior written approval from the State.
Terms and Conditions
18. Procurement Rights
OTDA reserves the right to:
a. Reject any and all Proposals, in whole or in part, received in response to this
Solicitation.
b. Correct Proposers’ mathematical errors and waive or modify other minor irregularities in proposals received, after prior notification to the Proposer.
c. Utilize any and all ideas submitted in the proposals received.
d. Negotiate with Proposers responding to this Solicitation within the Solicitation requirements to serve the best interests of the State.
e. Begin contract negotiations with another bidding Contractor(s) in order to serve the best interests of the State of New York should OTDA be unsuccessful in negotiating a contract with the selected Contractor.
f. Waive any non-material requirement.
g. Not make an award from this Solicitation.
h. Make an award under this Solicitation in whole or in part.
i. Make multiple contract awards pursuant to this Solicitation.
j. Have any service completed via separate competitive bid or other means, as determined to be in the best interest of the State.
k. Seek clarifications or revisions of information in a Proposal.
l. Disqualify any bidder whose conduct and/or Proposal fails to conform to the material requirements of the Solicitation.
m. Prior to the Bid Submission Date, amend the Solicitation specifications to correct errors or oversights, or to supply additional information, as it becomes available.
19. Contract Effective The Contract shall be deemed effective upon its approval by the New York State Comptroller.
20. Official Use Only/No Personal Use The Contract is only for official use. Use of the Contract for personal or private purposes is strictly prohibited.
21. Modification of Contract Terms The Contract may only be modified or amended upon mutual written agreement of OTDA and the Contractor, and approved by OSC and the AG as necessary.
Appendix B 14
The Contractor may, however, offer OTDA more advantageous pricing, payment, or other terms and conditions than those set forth in the Contract. In such event, a copy of such terms shall be furnished to OTDA by the Contractor at the time of such offer.
Other than where such terms are more advantageous than those set forth in the Contract, no alteration or modification of the terms of the Contract, including substitution of Product, shall be valid or binding unless authorized by OTDA or specified in the Contract Award Notification. No such alteration or modification shall be made by unilaterally affixing such terms to Product upon delivery (including, but not limited to, attachment or inclusion of standard pre-printed order forms, product literature, “shrink wrap” terms accompanying software upon delivery, or other documents) or by incorporating such terms onto order forms, Purchase Orders or other documents forwarded by the Contractor for payment, notwithstanding OTDA’s subsequent acceptance of Product, or that OTDA has subsequently processed such document for approval or payment.
22. Scope Changes Prior to the Contractor implementing any change in the Services, it shall obtain the consent and approval of OTDA. The Contractor shall, prior to implementation of any such change, give written notice to OTDA of the service affected, a description of the change, why it is needed, a suggested implementation approach (and testing if necessary), the cost to OTDA if any, and any other information requested by OTDA. The approval, prior to implementation, of any requested change is in the sole discretion of OTDA.
In the event that OTDA proposes a change in technology or Services, it shall, prior to implementation of any such change, give written notice to the Contractor with a description of the change, why it is needed, a suggested implementation approach (and testing if necessary), and the Contractor shall have a reasonable time to analyze the cost, if any, to the Contractor. The final determination for implementation of any requested change pursuant to this section is in the sole discretion of OTDA.
OTDA reserves the right to direct operating changes to the Contractor based on its own observations or based on suggestions made by the Contractor.
Work performed outside the scope of the Agreement or without the approval of OTDA shall not be subject to charge by the Contractor.
23. Estimated/Specific Quantity Contracts Estimated quantity contracts, also referred to as indefinite delivery/indefinite quantity contracts, are expressly agreed and understood to be made for only the quantities, if any, actually ordered during the Contract term. No guarantee of any quantity is implied or given.
24. Emergency Contracts In the event that a disaster emergency is declared by Executive Order under Section 28 of Article 2-B of the Executive Law, OTDA reserves the right to obtain
Appendix B 15 the Product from any source, including but not limited to this Contract, as OTDA, in its sole discretion, determines will meet the needs of such emergency.
Contractor shall not be entitled to any claim for lost profits for Product procured from other sources pursuant to this clause. The reasons underlying the finding that an emergency exists shall be included in the procurement record.
25. Product Delivery Delivery must be made, if required, in accordance with the terms of the Contract.
The decision of OTDA as to compliance with delivery terms shall be final. In all instances of a potential or actual delay in delivery, the Contractor shall immediately notify OTDA, and confirm in writing the explanation of the delay, and take appropriate action to avoid any subsequent late deliveries. Any extension of time for delivery must be requested in writing by the Contractor and approved by OTDA in writing.
26. Title and Risk of Loss for Products Other Than Technology Products Notwithstanding the form of shipment, title or other property interest, risk of loss for Products other than technology Products shall not pass from the Contractor to OTDA until the Products have been received, inspected and accepted by OTDA.
Acceptance shall occur within a reasonable time or in accordance with such other defined acceptance period as may be specified in the Contract. Mere acknowledgment by OTDA of the delivery or receipt of goods (e.g., signed bill of lading) shall not be deemed or construed as acceptance of the Products received. Any delivery of Product that is substandard or does not comply with the Contract may be rejected or accepted on an adjusted price basis, as determined by OTDA. Title, risk of loss, and acceptance for technology Products shall be governed by the Contract.
27. Product Substitution In the event a specified Product listed in the Contract becomes unavailable or cannot be supplied by the Contractor for any reason (except as provided for in the Savings/Force Majeure clause), a Product deemed in writing by OTDA to be equal to or better than the specified Product must be substituted by the Contractor at no additional cost or expense to OTDA. Unless otherwise specified, any substitution of Product shall require OTDA’s written approval.
28. Rejected Product When Product is rejected, it must be removed by the Contractor from OTDA’s premises within 10 calendar days of notification of rejection by OTDA. Upon notification of rejection, risk of loss of rejected or non-conforming Product shall remain with Contractor.
29. Installation Where installation is required, Contractor shall be responsible for placing and installing the Product in the required locations. All materials used in the installation shall be of good quality and shall be free from any and all defects that would mar the Product or render it unsound. Installation includes the furnishing of
Appendix B 16 any equipment, rigging and materials required to install or place the Product in the proper location. The Contractor shall protect the Site from damage for all its work and shall repair damages or injury of any kind caused by the Contractor, its employees, officers or agents. If any alteration, dismantling or excavation, etc. is required to effect installation, the Contractor shall thereafter promptly restore the structure or Site. Work shall be performed to cause the least inconvenience to OTDA and with proper consideration for the rights of other Contractors or workers. The Contractor shall promptly perform its work and shall coordinate its activities with those of other Contractors. The Contractor shall clean up and remove all debris and rubbish from its work as required or directed. Upon completion of the work, the building and surrounding area of work shall be left clean and in a neat, unobstructed condition, and everything in satisfactory repair and order.
30. Repaired or Replaced Products, Parts, or Components Where the Contractor is required to repair, replace or substitute Product or parts or components of the Product under the Contract, the repaired, replaced or substituted Products shall be subject to all terms and conditions for new parts and components set forth in the Contract including warranties, as set forth in the Warranties clause herein. Replaced or repaired Product or parts and components of such Product shall be new and shall, if available, be replaced by the original manufacturer’s component or part. Before installation, all proposed substitutes for the original manufacturers’ installed parts or components must be approved by the Authorized User. The part or component shall be equal to or of better quality than the original part or component being replaced.
31. Staff For the purposes of this Section, “Staff” includes employees, owners, officers, directors, or agents of the Contractor and of any of the Contractor’s subcontractors.
The Contractor shall retain only individuals with the moral fitness and abilities necessary to perform Services hereunder. All employees, Subcontractors, or agents of the Contractor performing work under the Contract must be trained staff or technicians who meet or exceed the professional, technical, and training qualifications set forth in the Contract, and must comply with all security and administrative requirements in the Contract. OTDA reserves the right to conduct a security background check or otherwise approve any employee, Subcontractor, or agent furnished by Contractor and to refuse access to or require replacement of any personnel for cause based on professional, technical or training qualifications, quality of work or change in security status or non-compliance with OTDA’s security or other requirements. Such approval shall not relieve the Contractor of the obligation to perform all work in compliance with the Contract.
OTDA reserves the right to reject and/or bar from any OTDA facility for cause any employee, Subcontractor, or agent of the Contractor.
The Contractor certifies that all staff provided to perform Services possesses the necessary integrity and professional capacity to meet OTDA’s reasonable
Appendix B 17 expectations. Subsequent to the commencement of Services, whenever the Contractor becomes aware, or reasonably should have become aware, that any staff member(s) providing Services no longer possess the necessary integrity or professional capacity, the Contractor shall immediately discontinue the use of such staff and notify OTDA.
OTDA reserves the right to require the Contractor discharge, from performance of any or all duties under the Agreement, Key Staff for reasonable cause. The Contractor agrees to replace any Key Staff so discharged with an employee of equal or better qualifications. If the OTDA exercises its right under this provision, it agrees to provide written notice to the Contractor setting forth its reasons to discharge an employee.
The Contractor shall determine the method and frequency by which it conducts and confirms the fitness of its employees to perform duties under this Agreement, which determinations shall be incorporated into a comprehensive plan. If the Contractor is unable to determine an employee's fitness due to the results of a criminal history or security background check, the Contractor shall forward a description of the results to the OTDA, for review and determination. The Contractor's agreement to comply with the provisions of this section is a material representation of fact upon which reliance was placed when the OTDA determined to enter into this Agreement. In determine an employee's fitness, the Contractor is not required to exceed the level of judgment which is normally possessed by a prudent person in the ordinary course of business dealings. If it is later determined that the Contractor knowingly, rendered a false positive determination of an employee's fitness, failed to conduct a criminal history or security background check, or failed to reasonably interpret the results in confirming an employee's fitness to perform duties under the terms of this Agreement, in addition to any other remedies available to the OTDA, such as liquidated damages, the OTDA may terminate this Agreement for cause. The Contractor shall provide immediate written notice to the OTDA if at any time the Contractor learns that its determination of an employee's fitness to perform duties under the terms of this Agreement was erroneous or has become erroneous by reason of changed circumstances. The Contractor will ensure that the provisions of this section are incorporated within all subcontracts, and acknowledges the responsibility for ensuring that these provisions are fully complied with by all subcontractors.
32. Assignment In accordance with Section 138 of the State Finance Law and NYS Appendix A’s provision on assignment, the State shall not hinder, prevent or affect assignment of money by a Contractor for the benefit of its creditors. Prior to a consent to assignment of monies becoming effective, the Contractor shall file a written notice of such monies assignments with the State Comptroller. Prior to a consent to assignment of a Contract, or portion thereof, becoming effective, the Contractor shall submit the request for assignment to OTDA and seek written agreement from OTDA which will be filed with the State Comptroller. OTDA shall use reasonable efforts to promptly respond to any request by Contractor for an
Appendix B 18 assignment, provided that Contractor supplies sufficient information about the party to whom the Contractor proposes to assign the Contract.
Upon notice to the Contractor, the Contract may be assigned without the consent of the Contractor to another State Agency or subdivision of the State pursuant to a governmental reorganization or assignment of functions under which the functions are transferred to a successor Agency or to another Agency that assumes OTDA responsibilities for the Contract.
33. Subcontractors OTDA reserves the right to reject any proposed Subcontractor for bona fide business reasons, including, but not limited to: 1) the subcontractor’s failure to solicit New York State certified minority- and women-owned business enterprises as required in prior OTDA contracts; 2) the fact that such Subcontractor is on the New York State Department of Labor’s or New York State Office of General Services’ list of companies with which New York State cannot do business; or 3) a final determination by OTDA that the subcontractor is not qualified or is not responsible; or the fact that the subcontractor has previously provided unsatisfactory work or services.
OTDA reserves the right to approve and review contracts between the Contractor and Subcontractors prior to subcontractors’ performance of the Services.
When proposing to add, to replace, or to assume the responsibilities of an existing Subcontractor during the Contract Term, the Contractor must notify the OTDA of its intent to do so. Such notification must include justification for the change, and provide the proposed managerial staff, Subcontractor's qualifications and experience, and provide transition work plans outlining the timeline, activities and dependencies that ensure that such action will not jeopardize or impact the Contract. Such transition work plans are subject to the review and approval of the OTDA. The OTDA will review the plans and provide a reply to the Contractor within fifteen (15) business days, provided; however, that if the Subcontractor will have access to Federal Tax Return Information, the time to reply shall be increased to allow for notifications required by Internal Revenue Service (IRS) Publication 1075. No Contractor costs or expenditures related to expenditures or obligations paid or owing to unapproved subcontracts may be asserted as damages or otherwise presented for payment in any proceeding or discussion involving the Contractor and the OTDA.
All subcontracts shall be in writing and shall contain provisions, which are functionally identical to, and consistent with, the provisions of the Agreement. All subcontracts must contain a provision stating that the Subcontractor agrees that the subcontract is subordinate to the Agreement with the OTDA and that any and all conflicting provisions of the subcontract will be superseded by the terms of the Agreement.
The Contractor shall be jointly and severally liable and responsible for the actions of its agents, employees, partners, and subcontractors including losses or direct damages arising from, but not limited to their defective or inadequate
Appendix B 19 performance.
The Contractor will work with the OTDA to identify any potential operational disruption if the Contractor elects to terminate or change its agreement with any Subcontractor.
In addition to furnishing the OTDA with a copy of any proposed subcontract, if requested, for prior approval, the Contractor shall also furnish to the OTDA the following:
a. A description of the supplies or services to be provided under the proposed subcontract;
b. Identification of the proposed Subcontractor;
c. The proposed subcontract price;
d. Any other pertinent information or documentation requested by the
OTDA; and
e. A copy of any subcontract or modification thereto, once approved by the OTDA and executed by the Contractor.
The Contractor shall give the OTDA immediate written notice of any legal action or suit filed, and prompt notice of any claim made, against the Contractor by any subcontractor or vendor which may result in litigation related in any way to the Agreement or which may affect the performance of Services under the Agreement.
The requirement of prior approval of any subcontract by the OTDA under the Agreement shall not make the OTDA or the State a party to any subcontract or create any right, claim, or interest in the Subcontractor or proposed Subcontractor against the OTDA or the State.
The Contractor shall not be relieved in any way of any responsibility, duty, or obligation of the Agreement by any subcontract.
34. Suspension of Work OTDA, in its sole discretion, reserves the right to suspend any or all activities under the Contract, at any time, due to a budget freeze or reduction in State spending, or declaration of emergency. Upon issuance of such notice, the Contractor shall comply with the suspension order. Activity may resume at such time as OTDA issues a formal written notice authorizing a resumption of performance under the Contract.
35. Termination
a. Mutual Agreement All or any part of this Agreement may be terminated by mutual written agreement of OTDA and the Contractor.
b. For Cause For a material breach that remains uncured for more than 30 calendar days or other longer period as specified by written notice to the Contractor, the Contract may be terminated by OTDA for cause. Neither the State nor OTDA shall be liable for any of Contractor’s costs arising from the
Appendix B 20 failure to perform or the termination, including without limitation costs incurred after the date of termination. Such termination shall be upon written notice to the Contractor. In such event, OTDA may complete the contractual requirements in any manner it may deem advisable and pursue available legal or equitable remedies for breach.
A material breach means a significant and/or repeated failure(s) to deliver a Product in accordance with the timetable, price or performance standards applicable thereto, or when a material term of the Contract is breached.
c. For Convenience This Contract may be terminated at any time by OTDA for convenience upon 60 calendar days or other longer period as specified by written notice, without penalty or other early termination charges due. If the Contract is terminated pursuant to this subdivision, OTDA shall remain liable for all accrued but unpaid charges incurred through the date of the termination.
d. For Violation of Sections 139-j and 139-k of the State Finance Law OTDA reserves the right to terminate the Contract in the event it is found that the certification filed by the Bidder in accordance with Section 139-k of the State Finance Law was intentionally false or intentionally incomplete. Upon such finding, OTDA may exercise its termination right by providing written notification to the Contractor in accordance with the written notification terms of the Contract.
e. For Violation of Section 5-a of the New York State Tax Law OTDA reserves the right to terminate the Contract in the event it is found that the certification filed by the Contractor in accordance with Section 5-a of the Tax Law is not timely filed during the term of the Contract or the certification furnished was intentionally false or intentionally incomplete. Upon such finding, OTDA may exercise its termination right by providing written notification to the Contractor in accordance with the written notification terms of the Contract.
f. For Non-Responsibility The Contractor agrees that if it is found by the State that its responses to the Vendor Responsibility Questionnaire were intentionally false or intentionally incomplete, then OTDA may terminate the Contract.
Upon written notice to the Contractor, and a reasonable opportunity to be heard with appropriate OTDA officials or staff, the Contract may be terminated by OTDA at the Contractor’s expense where the Contractor is determined by OTDA to be non-responsible. In such event, OTDA may complete the contractual requirements in any manner it may deem advisable and pursue available legal or equitable remedies for breach.
In no case shall such termination of the Contract by the State be deemed a breach thereof, nor shall the State be liable for any damages for lost profits or otherwise, which may be sustained by the Contractor as a result of such termination.
Appendix B 21
g. Upon Conviction of Certain Crimes OTDA reserves the right to terminate the Contract in the event it is found that a member, partner, director or officer of Contractor is convicted of one or more of the following: Bribery Involving Public Servants and Related Offenses as defined in Article 200 of the New York State Penal Law; Corrupting the Government as defined in Article 496 of the New York State Penal Law; or Defrauding the Government as defined in Section 195.20 of the New York State Penal Law.
h. Mitigation of Costs The Contractor shall not undertake any additional or new contractual obligations on or after the receipt of notice of termination without the prior written approval of OTDA. On or after the recipe of notice of termination and during the termination notice period, the Contractor shall take all commercially reasonable and prudent actions to close out unnecessary outstanding,…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .