3-Bid26004 Drawings.pdf

PDF 10 MB Posted Feb 27, 2026

Attached to: Ada County Morris Hill Warehouse Remodel 2026
Solicitation number: BID 26004
Issued by: Ada County, Idaho

About this file

Written by GovTribe AI · Feb 27, 2026

This document comprises architectural and engineering drawings for the Ada County Morris Hill Warehouse Remodel project located at 5550 Morris Hill Road, Boise, Idaho 83706. The project is a comprehensive remodel of the existing 26,203 square foot warehouse facility operated by Ada County, transforming it into a coroner and evidence storage facility with administrative offices. The facility includes approximately 17,792 gross square feet of warehouse space classified as S1 occupancy (storage) and 8,411 gross square feet of office space classified as B occupancy (business/coroner operations). The scope of work encompasses complete demolition of existing cooler and freezer units, mezzanine structures, and select interior walls; installation of new pallet racking systems (multiple configurations including 96" x 48" x 16' tall and 48" x 48" x 16' tall units); installation of new HVAC systems including six gas-fired unit heaters with capacities of 105 MBH each; new fire protection systems including modification of the existing NFPA 13 sprinkler system; comprehensive electrical system upgrades including new panelboards, lighting, and fire alarm extensions; and complete plumbing system modifications to accommodate the new layout. The construction type is Type V-B (fully sprinkled), with the project requiring compliance with the 2018 IBC code.

The project encompasses mechanical systems featuring six identical Reznor UDXC 100 unit heaters for warehouse heating, a roof-mounted exhaust fan for the lifting/charging area, and recovery of existing refrigerant and equipment from the cooler/freezer systems to be returned to the owner. The electrical work includes installation of new panelboards W1 and W2 with 200-amp capacity, extension of existing exterior lighting circuits, installation of high-bay LED luminaires with wireless sensors and emergency drivers, and exit signage with battery backup throughout the facility. The fire alarm system extends the existing Simplex 4005 series panel to accommodate the new warehouse configuration with appropriate smoke detection and notification devices. Plumbing work involves installation of a reduced pressure backflow preventer, extension of gas lines to new unit heater locations (total new load of 2,930 MBH), and complete reconfiguration of waste and vent piping. The project specifications indicate approval of alternate manufacturers for major equipment including Trane, Modine, and Sterling for unit heaters; Hastings and Soler & Palau for exhaust fans; and Hubbell, Metalux, Lightguard, and Sure-Lites for lighting components. The design documents were prepared by Lombard-Conrad Architects with mechanical design by Musgrove Engineering P.A. and electrical design by Eidam and Associates, with a project number of 24-435 and drawing set dated February 2, 2026.

View the file

Other files

File	Type	Posted
1-Bid26004 Specifications.pdf	PDF	Feb 27, 2026
2-Bid26004 Bidders Bid Form.pdf	PDF	Feb 27, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

GRAPHIC AND MATERIAL SYMBOLS

(NUMBERS AND LETTERS)

GRID LINE

ROOM NAME

A101

SIM

SHEET NUMBER

DETAIL IDENTIFICATION

DETAIL

SHEET NUMBER

WALL SECTION

SECTION IDENTIFICATION

SHEET NUMBER

BUILDING SECTION

SECTION IDENTIFICATION

ROOM NUMBER

ROOM IDENTIFICATION

ROOM NAME

(NUMBER)

KEYNOTE

(NUMBER)

REVISION

DOOR LETTER

DOOR IDENTIFICATION

ROOM REFERENCE

WINDOW TYPE

(LETTER OR NUMBER)

WINDOW IDENTIFICATION

NORTH ARROW

CONTROL POINT OR

WORK POINT

DATUM POINT

TYPE NUMBER

WALL TAG

MATCHLINE

EARTH FILL

GRAVEL FILL

CONCRETE

SAND OR GROUT

BRICK OR STONE

CMU

STEEL

FINISH WOOD MEMBER

WOOD FRAMING MEMBER

WOOD BLOCKING

BATT BLANKET / BLOWN-IN

INSULATION / SPRAY APPLIED

FOAM INSULATION

RIGID INSULATION

PLYWOOD

GYPSUM BOARD

GLASS

CERAMIC TILE (PROFILE ONLY)

ACOUSTICAL TILE

SHEET NUMBER

ELEVATIONS

ELEVATION IDENTIFICATION

A101 2

A101

STATE OF IDAHO

KEN L. GALLEGOS

LICENSED

ARCHITECT

AR-984145

651 2 3

JOB N0.:

CHECKED BY:

SHEET NO.

DRAWN BY:

DATE:

234 S. WHISPERWOOD WAY

BOISE, IDAHO 83709

(208) 384-0585

MUSGROVE ENGINEERING P.A.

MECHANICAL ENGINEER

CONSULTANTS:

291 E. SHORE DRIVE, STE 210

EAGLE, ID 83616

(208) 345-7127

EIDAM AND ASSOCIATES

ELECTRICAL ENGINEER

PHASE:

is unlawful and subject to criminal prosecution.

STAMP:

M A u to d e s k D o c s

/A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l/ .0

A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l R

E V

.r v t

0.0

24308.01

ADA COUNTY

COVER SHEET

02/02/2026

26004 - ADA

COUNTY MORRIS

HILL WAREHOUSE

REMODEL 2026

Bid Set

A.B. ANCHOR BOLT

ACOUS. ACOUSTICAL

ADJ. ADJUSTABLE

A.F.F. ABOVE FINISH FLOOR

AGGR. AGGREGATE

AL. ALUMINUM

APPROX. APPROXIMATE

ARCH. ARCHITECTURAL

BD. BOARD

BITUM. BITUMINOUS

BLDG. BUILDING

BLK. BLOCK

BLKG. BLOCKING

BOT. BOTTOM

CAB. CABINET

C.F.O.I. CONTRACTOR-

FURNISHED/OWNER-

INSTALLED

C.L. CENTERLINE

CLG. CEILING

CLR. CLEAR

C.M.U. CONCRETE

MASONRY UNIT

COL. COLUMN

CONC. CONCRETE

CONN. CONNECTION

CONT. CONTINUOUS

CORR. CORRIDOR

CTSK. COUNTERSUNK

CNTR. COUNTER

CTR. CENTER

DBL. DOUBLE

DEPT. DEPARTMENT

D.F. DRINKING FOUNTAIN

DET. DETAIL

DIA. DIAMETER

DIM. DIMENSION

DISP. DISPENSER

DN. DOWN

EA. EACH

E.I.F.S. EXTERIOR

INSULATION

AND FINISH SYSTEM

E.J. EXPANSION JOINT

ELEC. ELECTRICAL

ELEV. ELEVATION

ELEV. ELEVATOR

ENCL. ENCLOSURE

EQ. EQUAL

EQUIP. EQUIPMENT

EXP. EXPANSION

EXST. EXISTING

EXT. EXTERIOR

F.A. FIRE ALARM

F.D. FLOOR DRAIN

F.E. FIRE EXTINGUISHER

F.E.C. FIRE EXTINGUISHER

CABINET

FF FACTORY FINISH

F.H.C. FIRE HOSE CABINET

FIN. FINISH

FLR. FLOOR

F.O.B. FACE OF BUILDING

F.O.C. FACE OF CONCRETE

F.O.E. FACE OF EXISTING

F.O.F. FACE OF FINISH

F.O.S. FACE OF STUDS

FT. FEET/FOOT

FTG. FOOTING

FURR. FURRING

GA. GAUGE

GALV. GALVANIZED

GND. GROUND

GR. GRADE

GYP. GYPSUM BOARD

H.C. HOLLOW CORE

HDWD. HARDWOOD

H.M. HOLLOW METAL

HORIZ. HORIZONTAL

HGT. HEIGHT

I.D. INSIDE DIAMETER

INSUL. INSULATION

INT. INTERIOR

JAN. JANITOR

JT. JOINT

KIT. KITCHEN

LAB. LABORATORY

LAV. LAVATORY

MAX. MAXIMUM

MECH. MECHANICAL

MTL. METAL

MFR. MANUFACTURER

MH. MANHOLE

MIN. MINIMUM

MISC. MISCELLANEOUS

M.O. MASONRY OPENING

MTD. MOUNTED

N/C NON-COMBUSTIBLE

N.I.C. NOT IN CONTRACT

NO. NUMBER

NOM. NOMINAL

N.T.S. NOT TO SCALE

O.A. OVERALL

O.C. ON CENTER

O.D. OUTSIDE DIAMETER

O.F.C.I. OWNER FURNISHED/

CONTRACTOR-

INSTALLED

O.F.O.I. OWNER FURNISHED/

OWNER INSTALLED

OFF. OFFICE

OPNG. OPENING

OPP. OPPOSITE

PL. PLATE

PL PLASTIC LAMINATE

PLAS. PLASTER

PLYWD. PLYWOOD

PR. PAIR

PT. POINT

P.T.D. PAPER TOWEL

DISPENSER

P.T.R. PAPER TOWEL

RECEPTACLE

Q.T. QUARRY TILE

RAD. RADIUS

R.D. ROOF DRAIN

REF. REFERENCE

REFR. REFRIGERATOR

REINF. REINFORCED

REQ. REQUIRED

RESIL. RESILIENT

RM. ROOM

R.O. ROUGH OPENING

R.W.L. RAIN WATER

LEADER

S.C. SOLID CORE

SECT. SECTION

SHTH'G. SHEATHING

SHT. SHEET

SIM. SIMILAR

SPEC. SPECIFICATION

SQ. SQUARE

S.S. STAINLESS STEEL

STA. STATION

STD. STANDARD

STL. STEEL

STOR. STORAGE

STRL. STRUCTURAL

SUSP. SUSPENDED

T.C. TOP OF CURB

TEL. TELEPHONE

T.O. TOP OF

T.O.B. TOP OF BLOCK

T.O.C. TOP OF CURB

T.O.P. TOP OF PLATE

T.O.W. TOP OF WALL

TRD. TREAD

T.V. TELEVISION

TYP. TYPICAL

U.O.N. UNLESS

OTHERWISE NOTED

UR. URINAL

VERT. VERTICAL

VEST. VESTIBULE

W/ WITH

W/O WITHOUT

W.C. WATER CLOSET

WD. WOOD

W.P. WATERPROOF

W.R. WATER RESISTANT

WT. WEIGHT

A-E F-M N-R S-Z

ZONING INFORMATION

A2.0 OVERALL / DEMOLITION PLANS

A2.1 OVERALL FLOOR PLANS

A2.2 FIRST FLOOR REFLECTED CEILING PLAN

A4.0 BUILDING SECTIONS / DETAILS

ARCHITECTURAL

SHEET INDEX

MECHANICAL

ELECTRICAL

26004 - ADA COUNTY MORRIS HILL

WAREHOUSE REMODEL 2026

5550 W. MORRIS HILL ROAD, BOISE ID 83706

FEBRUARY 02, 2026

LAND USE ZONE = M-1D

PARCEL # = R7777814114

PAR #4114 OF LOT 1

LAUCH INDUSTRIAL SITE & OF LOT 4 BLK 13

SCOTTS 3RD SUB R/S #4423 #4112-S

IBC CODE 2018

OCCUPANCY GROUPS: B/S1

CONSTRUCTION TYPE : VB

AREA OF BUILDING = 26,203 SF

FIRE SPRINKLERS: NFPA 13

FIRE ALARM SYSTEM: YES

PROJECT SITE

BOISE, IDAHO

0.0 COVER SHEET

0.02 LIFE SAFETY PLAN - CODE INFORMATION

E0.0 ELECTRICAL COVER SHEET

E0.1 LIGHTING COMPLIANCE CERTIFICATE

E2.0 OVERALL ELECTRICAL DEMOLITION PLANS

E2.1E OVERALL ELECTRICAL PLAN

E2.1F OVERALL FIRE ALARM PLAN

E2.1L OVERALL LIGHTING PLAN

E2.2 ROOF ELECTRICAL PLAN

E3.0 ONE LINE DIAGRAM

M0.0 MECHANICAL COVER SHEET

M1.0 FIRST FLOOR HVAC PLANS

M2.0 SECOND FLOOR HVAC PLANS

M3.0 ROOF HVAC PLANS

M4.0 MECHANICAL DETAILS & SCHEDULES

ABBREVIATIONS

GENERAL

FOR ADDITIONAL MATERIAL FINISH

ABBREVIATIONS, SEE MATERIAL

LEGEND ON ROOM FINISH SHEETS.

VICINITY MAP

EMERALD

W MORRIS HILL RD.

N C

U R

R D

EMERALD ST.

N P

I S

P1.0 FOUNDATION PLUMBING DEMOLITION PLAN

P1.1 FIRST FLOOR PLUMBING PLANS

P2.0 SECOND FLOOR PLUMBING PLANS

P3.0 ROOF PLUMBING PLANS

P4.0 PLUMBING DETAILS & SCHEDULES

M R

K D

A T

E D

E S

C R

FP1.0 FIRE PROTECTION DEMOLITION PLANS

FP1.1 FIRE PROTECTION PLAN

FACP

F.E.C.

T T

F .E

F.E.

F .E

F.E.

T T

LEGEND

Clear Exit

Width

Required Width

AREA 2 OCCUPANCY TYPE B

ROOM NAME AND NUMBER

TOTAL OCCUPANT LOAD IN ROOM (AS PER

I.B.C. TABLE 1004.1.1)

TOTAL OCCUPANT LOAD EXITING FROM

SPACE

TOTAL OCCUPANT LOAD EXITING FROM

BUILDING / OCCUPANCY

SPACE EGRESS

REQUIRED BUILDING EGRESS WITH LOAD

AND MINIMUM WIDTH

REQUIRED EXIT WIDTH (AS PER I.B.C. TABLE

1005.1)

ACTUAL EXIT WIDTH

INDICATES ACCESSORY SPACE FOR

OCCUPANCY LOADING CALCULATIONS

FIRE ALARM CONTROL PANEL LOCATION

LOCATION OF WALL MOUNTED FIRE

EXTINGUISHER.

MAXIMUM TRAVEL DISTANCE

ROOM NAME

OCCUPANCY TYPEB

AREA 2 OCCUPANCY TYPE S1

F.E.C.

1 2 3 4

40' - 0" 40' - 0" 40' - 0"

1 1

4 5

MAX TRAVEL

93'-8"

STATION 1

STATION 2

HALL

OFFICE

EVIDENCE

COOLER

FREEZER

106A

CHANGING

INTAKE

102INTAKE

FIRE RISER

ROOM

S H

SH SH

A B

A A

A B

A A

A A A A A A A A A

A A

MAX TRAVEL

97' - 0"

2 7/16"

32"

2.4"

32"

2.4"

32"

4.2"

32"

2.4"

1 2 3 4

S H

SH SH

A B

A A

A B

A A

A A A A A A A A A

A A

120' - 0"

40' - 0" 40' - 0" 40' - 0"

STATE OF IDAHO

KEN L. GALLEGOS

LICENSED

ARCHITECT

AR-984145

651 2 3

JOB N0.:

CHECKED BY:

SHEET NO.

DRAWN BY:

DATE:

234 S. WHISPERWOOD WAY

BOISE, IDAHO 83709

(208) 384-0585

MUSGROVE ENGINEERING P.A.

MECHANICAL ENGINEER

CONSULTANTS:

291 E. SHORE DRIVE, STE 210

EAGLE, ID 83616

(208) 345-7127

EIDAM AND ASSOCIATES

ELECTRICAL ENGINEER

PHASE:

is unlawful and subject to criminal prosecution.

STAMP:

M A u to d e s k D o c s

/A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l/ .0

A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l R

E V

.r v t

0.02

24308.01

ADA COUNTY

LIFE SAFETY PLAN

- CODE

INFORMATION

02/02/2026

26004 - ADA

COUNTY MORRIS

HILL WAREHOUSE

REMODEL 2026

Bid Set

1. EXTERIOR DIMENSIONS ARE TO ROUGH OPENING, CENTERLINE

OF COLUMN OR FACE OF FOUNDATION UNLESS OTHERWISE NOTED.

SEE WALL SECTIONS FOR RELATIONSHIP OF FRAMING / FINISHES TO

FACE OF FOUNDATION.

2. INTERIOR DIMENSIONS ARE TO CENTERLINE OF COLUMN OR

GRIDLINE, FACE OF CMU WALLS, OR CENTERLINE OF FRAMED WALLS

UNLESS OTHERWISE NOTED.

3. ALL INTERIOR WALLS SHALL EXTEND FROM FINISH FLOOR TO

9'-0" UNLESS NOTED OTHERWISE

KEYNOTES#

1. NO WORK IN THIS AREA. OCCUPANCY AND EXITING TO REMAIN

UNCHANGED.

2. UNOCCUPIED CEILING SPACE.

3. RELOCATED FIRE EXTINGUISHER.

NOTES:

N N

3/32" = 1'-0"E1 FIRST FLOOR PLAN CODE PLAN

CODE REVIEW

IBC CODE 2018

1. CHAPTER 3 - NON-SEPARATED OCCUPANCY:

S1 COUNTY STORAGE (CLASS I - IV)

• DOCUMENT AND EVIDENCE STORAGE

EQUIPMENT AND FURNITURE STAGING

B CORONER / MORGUE

• EVIDENCE STORAGE

• CADAVER STORAGE

• AUTOPSY FACILITY

• ADMINISTRATIVE OFFICES

• OFFICES - ANATOMICAL LAB

2. CHAPTER 6 - CONSTRUCTION TYPE: V-B FULLY SPRINKLED

3. CHAPTER 5 (506.2) - ALLOWABLE AREA:

S1 SM 27,000

B SM 27,000

MAX UNSEPARTED 27,000

ACTUAL 26,203 +/- - OK

4. CHAPTER 5 - (504.4) - ALLOWABLE FLOORS:

B SM 3

S1 SM 2

MAX UNSEPARTED 2

ACTUAL 2 - OK

5. CHAPTER 5 (504.3) - ALLOWABLE HEIGHT:

B SM 60

S1 SM 60

MAX UNSEPARTED 60

ACTUAL 30 +/- - OK

6. CHAPTER 6 (602) - TYPE V-B EXTERIOR WALL RATINGS:

EXCEEDS < 10', EACH SIDE RATING REQIRED = 0

7. CHAPTER 6 (601) - FIRE RESISTIVE ELEMENTS:

• STRUCTURAL FRAME: NON-RATED

• EXTERIOR BEARING WALLS: NON-RATED

• INTERIOR BEARING WALLS: NON-RATED

• FLOOR CONSTRUCTION: NON-RATED

• ROOF CONSTRUCTION: NON-RATED

8. BUILDING AREA:

• MAIN LEVEL BUILDING = 24,120 S.F.

• SECOND LEVEL = 2,083 S.F.

• TOTAL BUILDING AREA = 26,203 S.F.

10. OCCUPANT LOAD (1004.5): 136

17,792 GROSS SF WAREHOUSE SPACE: 17,792/500 = 36 OCCUPANTS

8,411 GROSS SF OFFICE: 8,411/150 = 57 OCCUPANTS

11. CHAPTER 10 (1006.2.1) - SPACES WITH ONE MEANS OF EGRESS:

B OCCUPANCIES WITH MAXIMUM OCCUPANT LOAD OF 49.

12. CHAPTER 10 (1020.1) - CORRIDOR FIRE RESISTANCE RATING:

NON RATED DUE TO FIRE SPRINKLER SYSTEM.

13. CHAPTER 29 (2902.1) - REQUIRED PLUMBING FIXTURES:

WAREHOUSE (36 OCC.)

W.C. REQ'D: 1

LAVS REQ'D: 1

BUSINESS (57 OCC.)

W.C. REQ'D: 3

LAVS REQ'D: 2

TOTAL

W.C. PROVIDED: 6 (EXISTING)

LAVS PROVIDED: 6 (EXISTING)

SERVICE SINKS PROVIDED: 1 (EXISTING)

3/32" = 1'-0"E4 SECOND FLOOR PLAN CODE PLAN

M R

K D

A T

E D

E S

C R

F .E

F.E.C.

F.E.

F .E

F.E.

F .E

F.E.

DEMOLITION LEGEND

EXISTING WALLS TO BE REMOVED.

AREA OF EPOXY FLOOR FINISH TO BE REMOVED. GRIND

AND REMOVE. RESEAL CONCRETE.

1 2 3 4

40' - 0" 40' - 0" 40' - 0"

STATION 1

109STATION 2

HALL

OFFICE

EVIDENCE

COOLER

FREEZER

106A

CHANGING

INTAKE

FIRE RISER

ROOM

A4.0

7 21

8 8

14 22

7 21

1818 2

120' - 0"

33 33

1 2 3 4

A4.0

120' - 0"

40' - 0" 40' - 0" 40' - 0"

STATE OF IDAHO

KEN L. GALLEGOS

LICENSED

ARCHITECT

AR-984145

651 2 3

JOB N0.:

CHECKED BY:

SHEET NO.

DRAWN BY:

DATE:

234 S. WHISPERWOOD WAY

BOISE, IDAHO 83709

(208) 384-0585

MUSGROVE ENGINEERING P.A.

MECHANICAL ENGINEER

CONSULTANTS:

291 E. SHORE DRIVE, STE 210

EAGLE, ID 83616

(208) 345-7127

EIDAM AND ASSOCIATES

ELECTRICAL ENGINEER

PHASE:

is unlawful and subject to criminal prosecution.

STAMP:

M A u to d e s k D o c s

/A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l/ .0

A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l R

E V

.r v t

A2.0

24308.01

ADA COUNTY

OVERALL /

DEMOLITION

PLANS

02/02/2026

26004 - ADA

COUNTY MORRIS

HILL WAREHOUSE

REMODEL 2026

Bid Set

KEYNOTES#

1. REMOVE EXISTING STAIR AND SUPPORTS.

2. REMOVE EXISTING DOOR AND FRAME.

3. EXISTING MEZZANINE STRUCTURE TO BE REMOVED.

4. EXISTING COOLER AND FREEZER UNITS TO BE DECONSTRUCTED AND

REMOVED (WALLS AND CEILINGS). REMOVAL SHALL BE PERFORMED BY A

QUALIFIED CONTRACTOR EXPERIENCED IN THE INSTALLATION AND

DECONSTRUCTION OF COMMERCIAL FREEZER/COOLER SYSTEMS.

5. EXISTING PLUMBING FIXTURES TO BE REMOVED.

6. EXISTING FIRE SPRINKLER SYSTEM. PROTECT FROM DAMAGE.

7. REMOVE CEILINGS, LIGHTS, AND HVAC IN THIS AREA.

8. AREA TO REMAIN. PROTECT FROM DAMAGE.

9. REMOVE FURRING TO CONCRETE WALL SURFACE. PREPARE WALL FOR

NEW PAINT.

10. REMOVE CABINETRY.

11. ELECTRIC PANEL TO REMAIN.

12. REMOVE EXISTING CURB TO SLAB. GRIND AREA SMOOTH AND SEAL.

13. DOCK LEVELER. PROTECT FROM DAMAGE.

14. REMOVE WALL TO INTERSECTION. PROTECT AND REPAIR WALL WHERE

REMOVED TO MATCH ADJACENT FINISH.

15. WALL OF COOLER TO BE DECONSTRUCTED PER NOTE 4. SEE DETAIL

E6/A4.0 FOR CONCRETE SLAB EDGE REPAIR.

16. FIRE EXTINGUISHER CABINET. SAVE FOR REUSE.

17. ROLL-UP DOORS. PROTECT FROM DAMAGE.

18. EXISTING CONCRETE WALL TO REMAIN.

19. REMOVE EXISTING WINDOW.

20. REMOVE EXISTING WOOD INFILL WALL TO CONCRETE WALLS.

21. REMOVE EXISTING CARPET, MASTIC, AND RESIDUE. CLEAN CONCRETE

SLAB AND RESEAL.

22. REMOVE FENCING AND GATES.

23. REMOVE EXISTING VCT FLOORING AND CLEAN CONCRETE SLAB.

RESEAL. FLOORING TO BE SALVAGED AND RETURNED TO OWNER.

24. REMOVE FLOOR STRUCTURE TO CONCRETE WALLS.

25. REMOVE WALKWAY.

26. REMOVE DOOR AND LEAVE DOOR FRAME.

27. HVAC EQUIPMENT ABOVE. PROTECT FROM DAMAGE.

28. PLATFORM TO REMAIN. PROTECT FROM DAMAGE.

29. REMOVE HANDRAIL.

30. REMOVE EXISTING FIRE EXTINGUISHER. PRESERVE AND PROTECT FOR

REINSTALLATION.

31. EXISTING ELECTRICAL PANEL TO BE REMOVED. SEE ELECTRICAL

DRAWINGS.

32. EXISTING WASHER + DRYER UNITS - REMOVE AND PROTECT FOR

REINSTALLATION.

33. EXISTING RACKING, COORDINATE WITH OWNER FOR REMOVAL.

1. PRIOR TO BEGINNING DEMOLITION, A SURVEY OF THE PROPOSED

DEMOLITION AREA SHALL BE MADE BY THE CONTRACTOR TO

DETERMINE THE CONNECTIONS, FRAMING METHODS, AND CONDITIONS

OF THE AREAS TO BE DISMANTLED.

2. ALL DEMOLISHED MATERIALS SHALL BE PROPERLY DISPOSED OF IN

ACCORDANCE WITH ALL LAWS AND REGULATIONS. CONTRACTOR TO

PAY ALL DUMPING FEES. ALL ITEMS THE OWNER DESIRES TO SALVAGE

SHALL BE IDENTIFIED PRIOR TO DEMOLITION.

3. COORDINATE WITH PLUMBING, AND ELECTRICAL WORK TO BE REMOVED.

VERIFY ALL ROUTING AND CONNECTIONS OF ALL LINES PRIOR TO

REMOVAL.

4. THE PUBLIC SHALL BE PROTECTED FROM THE DEMOLITION MATERIAL,

DUST, FUMES, ETC. BY BARRIERS AND OR PLASTIC SHEETS AS

REQUIRED. DEMOLITION WORK SHALL CEASE IF THE PUBLIC IS

ENDANGERED IN ANY WAY.

5. DEMOLITION DRAWINGS ARE BASED ON THE LATEST FIELD

VERIFICATION, HOWEVER THE CONTRACTOR AND ITS

SUBCONTRACTORS SHALL VERIFY ALL CONDITIONS PRIOR TO THE

START OF DEMOLITION.

6. ALL EXISTING CONDITIONS AND STRUCTURE NOT SPECIFICALLY NOTED

FOR REMOVAL SHALL BE RETAINED AND PROTECTED. EXISTING

STRUCTURES THAT ARE DAMAGED DURING THE COURSE OF

CONSTRUCTION SHALL BE REPAIRED OR REPLACED.

7. CONFIRM ALL DIMENSIONS IN FIELD.

8. PATCH AND REPAIR ALL EXISTING FLOORS, WALLS, CEILINGS, FINISHES,

ETC. REMAINING AFTER DEMOLITION AS REQUIRED TO PROVIDE FLUSH

AND LEVEL CONDITIONS COMPATIBLE WITH AND/ OR EQUAL TO

ADJACENT CONSTRUCTION AND FINISHES.

GENERAL NOTES

3/32" = 1'-0"E1 FIRST FLOOR DEMOLITION PLAN

N N

3/32" = 1'-0"E4 SECOND DEMOLITION PLAN

M R

K D

A T

E D

E S

C R

C O

O L E

R R

E V

N S

F .E

F.E.

F .E

F.E.

LEGEND

1i ASSEMBLY TYPE - SEE SHEET A4.0

EXISTING WALL TO REMAIN

NEW FRAMED WOOD OR STEEL STUD

PARTITIONS - SEE WALL TYPES ON A4.0

FOR REQUIREMENTS

RACKING TYPE A: 96" x 48" x 16' TALL

RACKING TYPE B: 48" x 48" x 16' TALL

RACKING TYPE SH: 96" x 24" x 11' TALL

1 2 3 4

40' - 0" 40' - 0" 40' - 0"

FIRE RISER

ROOM

A4.0

A4.0 S

S H

SH SH

93.P

93.P93.P

93.P

B A

A A

A B

A A

A A A A A A A A A

A A

1 1

93.P

105613.A

TYP

105613.A

TYP

120' - 0"

A4.0

TYP

93.P

7 055000.I

1 2 3 4

A4.0

S H

SH SH

A B

A A

A B

A A

A A A A A A A A A

A A

105613.A

TYP

105613.A

TYP

120' - 0"

40' - 0" 40' - 0" 40' - 0"

93.F

7 055000.I

STATE OF IDAHO

KEN L. GALLEGOS

LICENSED

ARCHITECT

AR-984145

651 2 3

JOB N0.:

CHECKED BY:

SHEET NO.

DRAWN BY:

DATE:

234 S. WHISPERWOOD WAY

BOISE, IDAHO 83709

(208) 384-0585

MUSGROVE ENGINEERING P.A.

MECHANICAL ENGINEER

CONSULTANTS:

291 E. SHORE DRIVE, STE 210

EAGLE, ID 83616

(208) 345-7127

EIDAM AND ASSOCIATES

ELECTRICAL ENGINEER

PHASE:

is unlawful and subject to criminal prosecution.

STAMP:

M A u to d e s k D o c s

/A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l/ .0

A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l R

E V

.r v t

A2.1

24308.01

ADA COUNTY

OVERALL FLOOR

PLANS

02/02/2026

26004 - ADA

COUNTY MORRIS

HILL WAREHOUSE

REMODEL 2026

Bid Set

CONDOC

055000.I METAL LADDER.

105613.A METAL STORAGE SHELVING

1. EXTERIOR DIMENSIONS ARE TO ROUGH OPENING, CENTERLINE

OF COLUMN OR FACE OF FOUNDATION UNLESS OTHERWISE NOTED.

SEE WALL SECTIONS FOR RELATIONSHIP OF FRAMING / FINISHES TO

FACE OF FOUNDATION.

2. INTERIOR DIMENSIONS ARE TO CENTERLINE OF COLUMN OR

GRIDLINE, FACE OF CMU WALLS, OR CENTERLINE OF FRAMED WALLS

UNLESS OTHERWISE NOTED.

3. ALL INTERIOR WALLS SHALL EXTEND FROM FINISH FLOOR TO

9'-0" UNLESS NOTED OTHERWISE

KEYNOTES#

1. EXISTING AREA TO REMAIN. PROTECT FROM DAMAGE.

2. RESEAL CONCRETE.

3. RELOCATED FIRE EXTINGUISHER.

4. RELOCATED WASHING MACHINE.

5. RELOCATED DRYER.

6. FUTURE OWNER PROVIDED LIFT CHARGING AREA.

7. NEW ACCESS LADDER TO CATWALK ABOVE. VERIFY HEIGHT IN

FIELD.

8. NEW ACCESS RAILING. MATCH HEIGHT OF ADJACENT RAILING.

9. EXISTING ROOF ACCESS LADDER.

NOTES:

3/32" = 1'-0"E1 OVERALL FIRST FLOOR PLAN

3/32" = 1'-0"E4 OVERALL SECOND FLOOR PLAN

N N

M R

K D

A T

E D

E S

C R

F.E.

CEILING LEGEND

EXISTING GYPSUM BOARD CEILING.

EXISTING INSULATED METAL CEILING PANEL.

GRID MOUNTED LIGHT FIXTURES

HVAC MECHANICAL GRILLS

SUSPENDED LIGHT FIXTURE

EXISTING LIGHT FIXTURES TO BE REMOVED.

SEE ELECTRICAL

EXISTING HVAC MECHANICAL GRILLS TO BE

REMOVED. SEE MECHANICAL.

EXISTING GYPSUM BOARD CEILING TO BE REMOVED

EXISTING INSULATED METAL CEILING

PANEL TO BE REMOVED.

GENERAL CEILING NOTES

1. PRIOR TO BEGINNING ANY DEMOLITION, A SURVEY OF THE PROPOSED

DEMOLITION AREA SHALL BE MADE BY THE CONTRACTOR TO DETERMINE

THE CONNECTIONS, FRAMING METHODS, AND CONDITIONS OF THE AREA

TO BE DISMANTLED.

2. VERIFY ALL EXISTING CONDITIONS AND REPORT ANY DISCREPANCIES TO

ARCHITECT PRIOR TO PROCEEDING WITH WORK.

3. COORDINATE WITH OWNER FOR SALVAGE OF ALL ITEMS BEING

REMOVED.

4. TAKE NECESSARY PRECAUTIONS TO PROTECT ALL EXISTING BUILDING

CONDITIONS AND ELEMENTS THAT ARE TO REMAIN. PATCH AND REPAIR

AS NECESARY ALL DAMAGED CONDITIONS.

5. ALL MATERIALS AND WORKMANSHIP SHALL CONFORM TO ALL

APPLICABLE STATE AND LOCAL CODES, LAWS, AND REGULATIONS AND

SHALL CONFORM TO THE 2018 IBC.

6. IN AREAS WHERE CEILING IS TO BE DEMOLISHED, REMOVE EXISTING

LIGHT FIXTURES. NOT ALL LIGHT FIXTURES TO BE REMOVED ARE SHOWN.

1 2 3 4

A4.0

120' - 0"

40' - 0" 40' - 0" 40' - 0"

1 2 3 4

A4.0

S H

SH SH

A B

A A

A B

A A

A A A A A A A A A

A A

120' - 0"

40' - 0" 40' - 0" 40' - 0"

TYP

105613.A

STATE OF IDAHO

KEN L. GALLEGOS

LICENSED

ARCHITECT

AR-984145

651 2 3

JOB N0.:

CHECKED BY:

SHEET NO.

DRAWN BY:

DATE:

234 S. WHISPERWOOD WAY

BOISE, IDAHO 83709

(208) 384-0585

MUSGROVE ENGINEERING P.A.

MECHANICAL ENGINEER

CONSULTANTS:

291 E. SHORE DRIVE, STE 210

EAGLE, ID 83616

(208) 345-7127

EIDAM AND ASSOCIATES

ELECTRICAL ENGINEER

PHASE:

is unlawful and subject to criminal prosecution.

STAMP:

M A u to d e s k D o c s

/A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l/ .0

A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l R

E V

.r v t

A2.2

24308.01

ADA COUNTY

FIRST FLOOR

REFLECTED

CEILING PLAN

02/02/2026

26004 - ADA

COUNTY MORRIS

HILL WAREHOUSE

REMODEL 2026

Bid Set

CONDOC

105613.A METAL STORAGE SHELVING

KEYNOTES#

3/32" = 1'-0"E1 EXISTING FIRST FLOOR REFLECTED CEILING PLAN

3/32" = 1'-0"E4 OVERALL REFLECTED CEILING PLAN

N N

1. REMOVE EXISTING STAIR AND SUPPORTS.

2. EXISTING MEZZANINE STRUCTURE TO BE REMOVED.

3. EXISTING COOLER AND FREEZER UNITS TO BE DECONSTRUCTED AND

REMOVED (WALLS AND CEILINGS). REMOVAL SHALL BE PERFORMED BY A

QUALIFIED CONTRACTOR EXPERIENCED IN THE INSTALLATION AND

DECONSTRUCTION OF COMMERCIAL FREEZER/COOLER SYSTEMS.

4. REMOVE CEILINGS, LIGHTS, AND HVAC IN THIS AREA.

5. AREA TO REMAIN. PROTECT FROM DAMAGE.

6. REMOVE WALKWAY.

7. CEILING MOUNTED HEATER, SEE MECHANICAL.

8. LIGHT FIXTURE, SEE ELECTRICAL.

M R

K D

A T

E D

E S

C R

C O

O L E

R R

E V

N S

FLOOR 1

0' - 0"

WAREHOUSE

ROOF

22' - 6"

FLOOR 2

10' - 0"

OFFICE ROOF

19' - 0"

ABCDEFGHJK E1

A4.0

A B

O V

E T

Y P

E S

B R

A C

L E

A R

H E

105613.A 105613.A 105613.A

105613.A

A4.0

TYP

FLOOR 1

0' - 0"

WAREHOUSE

ROOF

22' - 6"

FLOOR 2

10' - 0"

1 2 3 4C1

A4.0

A B

O V

E T

Y P

E S

B R

A C

L E

A R

H E

A B

O V

E T

Y P

E S

H R

A C

L E

A R

H E

105613.A105613.A105613.A105613.A105613.A105613.A 105613.A105613.A

A4.0

TYP

033000.S

9 SERIES

93.P

PARTIAL HEIGHT WALL

WALL TO 9'-0" A.F.F..

STEEL STUDS:

93.P - 362S125-30 @ 16" O.C.

96.P - 600S125-30 @ 16" O.C.

96.P

092216.A

092900.F3092900.A5

93.S

PARTIAL HEIGHT FURRING

WALL TO 9'-0" A.F.F..

STEEL STUDS:

93.P - 362S125-30 @ 16" O.C.

CONDITION AT WALL FURRING

AND/OR CHASE WALLS.

GYPSUM BOARD LOCATED AT

FINISH SIDE ONLY.

092216.A

092900.F3092900.A5

OTHER WALL

STRUCTURE

INTERIOR WALL TYPES

WALL BASE

PROVIDE SEALANT

UNDER TRACK

BASE AS

SCHEDULED

092900.A5

092216.A3

BASE AS

SCHEDULED

SEE SCHED

PER WALL TYPE

METAL TRACK

COIL STRAP

3"xCONTX20ga W/

(2) #10 SCREWS

AT EACH STUD

092900.B2

WALL TYPES LEGEND

WALL PROPERTIES

NOMINAL WALL WIDTH:

WALL MATERIAL

6 - WOOD STUD - SPEC. SECTION 061000

9 - NON-LOAD BEARING METAL STUD - SPEC. SECTION 092216

0 = 7/8" FURRING

1 = 1 5/8" 2 = 2 1/2"

3 = 3 5/8" (9 SERIES STEEL)

3 = 3 1/2" (6 SERIES WOOD)

4 = 4"

5 = C-H SHAFT WALL STUD

6 = 6" (STEEL)

6 = 5 1/2" (WOOD)

8 = 8" 10 = 10" 12 = 12"

P = PARTIAL HEIGHT WALL

S = FURRING WALL

NOTES:

1. REFER TO INDIVIDUAL WALL TYPES FOR ALL INFORMATION.

2. WALL DESIGNATIONS MAY INCLUDE MULTIPLE WALL PROPERTY

CHARACTERS.

3. ALL INTERIOR PARTITIONS HAVE GYPSUM BOARD BOTH SIDES TO

HEIGHT INDICATED UNLESS NOTED OTHERWISE.

4. ALL SOUND WALLS TO HAVE SOUND ATTENUATION BLANKETS.

5. ALL FURRED OUT WALLS HAVE GYPSUM BOARD ON FINISHED FACE

ONLY INDICATED UNLESS NOTED OTHERWISE.

6. REFER TO LIFE SAFETY PLANS ON SHEET 0.1 FOR DESIGNATIONS

AND LOCATIONS OF FIRE RATED WALLS.

3" = 1'-0"A4 WALL BASE

3" = 1'-0"A3 WALL BRACING

1 1/2" = 1'-0"E6 COOLER DETAIL

STATE OF IDAHO

KEN L. GALLEGOS

LICENSED

ARCHITECT

AR-984145

651 2 3

JOB N0.:

CHECKED BY:

SHEET NO.

DRAWN BY:

DATE:

234 S. WHISPERWOOD WAY

BOISE, IDAHO 83709

(208) 384-0585

MUSGROVE ENGINEERING P.A.

MECHANICAL ENGINEER

CONSULTANTS:

291 E. SHORE DRIVE, STE 210

EAGLE, ID 83616

(208) 345-7127

EIDAM AND ASSOCIATES

ELECTRICAL ENGINEER

PHASE:

is unlawful and subject to criminal prosecution.

STAMP:

M A u to d e s k D o c s

/A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l/ .0

A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l R

E V

.r v t

A4.0

24308.01

ADA COUNTY

BUILDING

SECTIONS /

DETAILS

02/02/2026

26004 - ADA

COUNTY MORRIS

HILL WAREHOUSE

REMODEL 2026

Bid Set

1/8" = 1'-0"C1 BUILDING SECTION

1/8" = 1'-0"E1 BUILDING SECTION

CONDOC

033000.S GROUT.

092216.A STEEL STUD FRAMING.

092216.A3 3-5/8" X 18-MIL STEEL STUDS AT 16" O.C.

092900.A5 5/8" TYPE X GYPSUM BOARD.

092900.B2 5/8" TYPE X GYPSUM CEILING BOARD.

092900.F3 5/8" ACOUSTICALLY ENHANCED GYPSUM BOARD.

105613.A METAL STORAGE SHELVING

KEYNOTES#

1. EXISTING AREA TO REMAIN. PROTECT FROM DAMAGE.

2. EXISTING UNDISTURBED BASE.

3. EXISTING CONCRETE SLAB.

4. EXISTING COOLER SLAB BUILD-UP.

5. REMOVE EXISTING INSULATION GAP. PATCH TO PROVIDE LEVEL

SLAB FINISH.

6. LIGHTING FIXTURE, SEE ELECTRICAL.

M R

K D

A T

E D

E S

C R

1 2 3 4

4 4

FP1.0

1 2 3 4

651 2 3

JOB N0.:

CHECKED BY:

SHEET NO.

DRAWN BY:

DATE:

APPROVAL AREA

234 S. WHISPERWOOD WAY

BOISE, IDAHO 83709

(208) 384-0585

MUSGROVE ENGINEERING P.A.

MECHANICAL ENGINEER

CONSULTANTS:

8727 W. ARDENE, SUITE 102

BOISE, IDAHO 83709

(208) 345-7127

EIDAM AND ASSOCIATES

ELECTRICAL ENGINEER

PHASE:

is unlawful and subject to criminal prosecution.

STAMP:

Project No. 24-435

:4 :4

M A u to d e s k D o c s

/A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l/ A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l M

P R

.r v t

FP1.0

24308.01

ADA COUNTY

FIRE PROTECTION

DEMOLITION

PLANS

02/02/2026

26004 - ADA

COUNTY MORRIS

HILL WAREHOUSE

REMODEL 2026

Bid Set

KEYED NOTES:

SYMBOL USED FOR CALLOUT#

1. EXISTING FIRE RISER LOCATION.

2. EXISTING FIRE SPRINKLER TO REMAIN AS-IS IN HATCHED REGION.

3. EXISTING EXTERIOR CANOPY SPRINKLER EXIT LOCATION. EXISTING

CANOPY SPRINKLER SYSTEM TO REMAIN.

4. REMOVE ALL FIRE SPRINKLER IN AREA BACK TO MAIN FIRE RISER.

5. EXISTING FIRE SPRINKLER IN ROOM TO BE REMOVED.

M R

K D

A T

E D

E S

C R

3/32" = 1'-0"E1 FIRST FLOOR FIRE PROTECTION DEMOLITION PLAN

3/32" = 1'-0"E4 SECOND FLOOR FIRE PROTECTION DEMOLITION PLAN

FIRE SPRINKLER NOTES:

A. THE EXISTING FIRE SPRINKLER SYSTEM SHALL BE MODIFIED

AND INSTALLED TO ACCOMMODATE THE REMODEL DESIGN

BY THE FIRE SPRINKLER CONTRACTOR. THIS PLAN

INDICATES GENERAL PARAMETERS THE FIRE SPRINKLER

CONTRACTOR MUST DESIGN AND INSTALL AROUND. THE

ENGINEER/ARCHITECT/OWNER RESERVES THE RIGHT TO

REVIEW AND APPROVE TEST VALVES, ZONING VALVES, FLOW

SENSORS, ETC. DURING THE SUBMITTAL PROCESS.

B. FIRE SPRINKLER CONTRACTORS SHALL BE LICENSED BY THE

IDAHO STATE FIRE MARSHAL, AND SHALL HAVE IN HIS/HER

EMPLOY AND WITHIN 50 MILES OF THE JOB SITE AN

ENGINEERING TECHNICIAN (LEVEL III), CERTIFIED BY NICET

(NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING

TECHNOLOGIES). PROOF OF BOTH MUST BE SUBMITTED TO

THE ENGINEER PRIOR TO THE START OF ANY FIRE

SPRINKLING DESIGN AND/OR INSTALLATION, NO

EXCEPTIONS.

C. ALL WORK REQUIRED FOR THE FIRE PROTECTION SYSTEM

SHALL BE THE RESPONSIBILITY OF THE FIRE SPRINKLER

CONTRACTOR. THE FIRE SPRINKLER SYSTEM SHALL BE

INSTALLED BY THE FIRE SPIRNKLER CONTRACTOR AS

REQUIRED TO SATISFY THE REQUIREMENTS OF THE LOCAL

JURISDICTION AND NFPA 13, LATEST EDITION.

ARCHITECT/ENGINEER ASSUMES NO RESPONSIBILITY OR

LIABILITY FOR THE DESIGN OF THE FIRE SPRINKLER SYSTEM.

D. REMOVE EXISTING SPRINKLER SYSTEM IN WAREHOUSE

AREA SUCH THAT THE EXISTING SPRINKLER SYSTEM IN THE

HATCHED OFFICE AREA REMAINS OPERATIONAL.

CONTRACTOR TO PHASE AS REQUIRED.

E. REFER TO THE FIRE SPRINKLER SPECIFICATIONS FOR

ADDITIONAL REQUIREMENTS.

NTSD7 EXISTING CANOPY EXIT

NTSE7 EXISTING FIRE RISER

2/3/2026

651 2 3

JOB N0.:

CHECKED BY:

SHEET NO.

DRAWN BY:

DATE:

APPROVAL AREA

234 S. WHISPERWOOD WAY

BOISE, IDAHO 83709

(208) 384-0585

MUSGROVE ENGINEERING P.A.

MECHANICAL ENGINEER

CONSULTANTS:

8727 W. ARDENE, SUITE 102

BOISE, IDAHO 83709

(208) 345-7127

EIDAM AND ASSOCIATES

ELECTRICAL ENGINEER

PHASE:

is unlawful and subject to criminal prosecution.

STAMP:

Project No. 24-435

:4 :4

M A u to d e s k D o c s

/A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l/ A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l M

P R

.r v t

FP1.1

24308.01

ADA COUNTY

FIRE PROTECTION

PLAN

02/02/2026

26004 - ADA

COUNTY MORRIS

HILL WAREHOUSE

REMODEL 2026

Bid Set

KEYED NOTES:

SYMBOL USED FOR CALLOUT#

1. INSTALL NEW FIRE SPRINKLER SYSTEM TO ACCOMMODATE NEW

WAREHOUSE LAYOUT. COORDINATE INSTALLATION WITH STORAGE

RACK HEIGHT, SEE STORAGE RACK DETAIL.

2. ENSURE EXISTING EXTERIOR CANOPY SYSTEM IS CONNECTED TO

NEW SYSTEM.

3. SPRINKLER SYSTEM IN EXISTING SPACE TO REMAIN. COORDINATE

PHASING OF NEW SYSTEM SUCH THAT THE SPRINKLER SYSTEM IN

THE EXISTING SPACE REMAINS OPERATIONAL.

4. REBUILD FIRE RISER TO ACCOMMODATE NEW SYSTEM. ENSURE

THAT THE EXISTING FIRE SPRINKLER SYSTEM IN THE HATCHED

OFFICE SPACE REMAINS OPERATIONAL, PHASE AS REQUIRED.

M R

K D

A T

E D

E S

C R

3/32" = 1'-0"E4 FIRE PROTECTION PLAN

FIRE SPRINKLER NOTES:

A. THE EXISTING FIRE SPRINKLER SYSTEM SHALL BE MODIFIED

AND INSTALLED TO ACCOMMODATE THE REMODEL DESIGN

BY THE FIRE SPRINKLER CONTRACTOR. THIS PLAN

INDICATES GENERAL PARAMETERS THE FIRE SPRINKLER

CONTRACTOR MUST DESIGN AND INSTALL AROUND. THE

ENGINEER/ARCHITECT/OWNER RESERVES THE RIGHT TO

REVIEW AND APPROVE TEST VALVES, ZONING VALVES, FLOW

SENSORS, ETC. DURING THE SUBMITTAL PROCESS.

B. FIRE SPRINKLER CONTRACTORS SHALL BE LICENSED BY THE

IDAHO STATE FIRE MARSHAL, AND SHALL HAVE IN HIS/HER

EMPLOY AND WITHIN 50 MILES OF THE JOB SITE AN

ENGINEERING TECHNICIAN (LEVEL III), CERTIFIED BY NICET

(NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING

TECHNOLOGIES). PROOF OF BOTH MUST BE SUBMITTED TO

THE ENGINEER PRIOR TO THE START OF ANY FIRE

SPRINKLING DESIGN AND/OR INSTALLATION, NO

EXCEPTIONS.

C. ALL WORK REQUIRED FOR THE FIRE PROTECTION SYSTEM

SHALL BE THE RESPONSIBILITY OF THE FIRE SPRINKLER

CONTRACTOR. THE FIRE SPRINKLER SYSTEM SHALL BE

INSTALLED BY THE FIRE SPIRNKLER CONTRACTOR AS

REQUIRED TO SATISFY THE REQUIREMENTS OF THE LOCAL

JURISDICTION AND NFPA 13, LATEST EDITION.

ARCHITECT/ENGINEER ASSUMES NO RESPONSIBILITY OR

LIABILITY FOR THE DESIGN OF THE FIRE SPRINKLER SYSTEM.

D. REMOVE EXISTING SPRINKLER SYSTEM IN WAREHOUSE

AREA SUCH THAT THE EXISTING SPRINKLER SYSTEM IN THE

HATCHED OFFICE AREA REMAINS OPERATIONAL.

CONTRACTOR TO PHASE AS REQUIRED.

E. REFER TO THE FIRE SPRINKLER SPECIFICATIONS FOR

ADDITIONAL REQUIREMENTS.

WAREHOUSE RACKING NOTES:

A. PALLET RACK HEIGHT IS APPROXIMATELY 16-FEET.

a. WITH PRODUCT ON TOP OF RACK, HEIGHT IS

APPROXIMATELY 17-FEET-6-INCHES.

b. CLEAR HEIGHT ABOVE PRODUCT IS

APPROXIMATELY 2-FEET-6-INCHES TO THE

STRUCTURE.

c. REFERENCE RACK LAYOUT ELEVATIONS FROM

RACKING VENDOR FOR FURTHER REQUIREMENTS.

B. CLASSIFICATION OF PRODUCT ON RACKING IS TO BE

DETERMINED.

a. COORDINATE WITH OWNER FOR FINAL PRODUCT

CLASSIFICATION.

C. COORDINATE WITH RACKING VENDOR ON MATERIAL TYPE.

D. MULTIPLE DIFFERENT RACK TYPES ARE INCLUDED IN

DESIGN.

a. REFERENCE RACK LAYOUT ELEVATIONS FROM

RACKING VENDOR FOR REQUIREMENTS.

AIRFLOW

T FCO

H WCO

S GCO

CO2

D-X

CFM

X"Ø

R-X

X"Ø

R-X

CFM

X"Ø

G-X

CFM

X"Ø

MPG

GWS

GWR

CWS

CWR

HWS

HWR

MECHANICAL ABBREVIATIONS

A/C or AC AIR CONDITIONING KW KILOWATT

AFF ABOVE FINISHED FLOOR KWH KILOWATT HOUR

AHU AIR HANDLING UNIT

ASHRAE

AMERICAN SOCIETY OF HEATING, REFRIGERATION, AND

AIR CONDITIONING ENGINEERS

LAT LEAVING AIR TEMPERATURE

LAV LAVATORY

BTU BRITISH THERMAL UNITS LEED LEADERSHIP IN ENERGY AND ENVIRONMENTAL DESIGN

BTUH BTUS PER HOUR LWT LEAVING WATER TEMPERATURE

CA COMBUSTION AIR MAX MAXIMUM

CC COOLING COIL MCA MINIMUM CIRCUIT AMPS

CFM AIR FLOW RATE (CUBIC FEET PER MINUTE) MOCP MAXIMUM OVERCURRENT PROTECTION

CHWR CHILLED WATER RETURN MIN MINIMUM

CHWS CHILLED WATER SUPPLY

CLG CEILING NC NOISE CRITERIA

CW COLD WATER NFPA NATIONAL FIRE PROTECTION ASSOCIATION

NTS NOT TO SCALE

DEG or ° DEGREE DIA or Ø DIAMETER OSA OUTSIDE AIR

DB DRY BULB

PD PRESSURE DROP

EA EXHAUST AIR PH or Ø PHASE

EAT ENTERING AIR TEMPERATURE PRV PRESSURE REDUCING VALVE

EER ENERGY EFFICIENCY RATIO

ESP EXTERNAL STATIC PRESSURE RA RETURN AIR

EWT ENTERING WATER TEMPERATURE RPM REVOLUTIONS PER MINUTE

RTU ROOFTOP UNIT

FCO FLOOR CLEANOUT

FD FIRE DAMPER SA SUPPLY AIR

FLA FULL LOAD AMPS SEER SEASONAL ENERGY EFFICIENCY RATIO

FLR FLOOR SFD COMBINATION SMOKE/FIRE DAMPER

FPM FEET PER MINUTE SP STATIC PRESSURE

FT FEET SYM SYMBOL

GA GAUGE T & P TEMPERATURE AND PRESSURE

GCO GRADE CLEANOUT TEMP TEMPERATURE

GPM WATER FLOW RATE (GALLONS PER MINUTE) TYP TYPICAL

HC HEATING COIL UMC UNIFORM MECHANICAL CODE

HP HORSE POWER UPC UNIFORM PLUMBING CODE

HVAC HEATING, VENTILATING, AIR CONDITIONING URL URINAL

HW HOT WATER

HWR HOT WATER RETURN VTR VENT THROUGH ROOF

HWS HOT WATER SUPPLY V VOLTS

IBC INTERNATIONAL BUILDING CODE W/ WITH

IECC INTERNATIONAL ENERGY CONSERVATION CODE WB WET-BULB

IFC INTERNATIONAL FIRE CODE WC WATER CLOSET

IFGC INTERNATIONAL FUEL GAS CODE WCO WALL CLEANOUT

IMC INTERNATIONAL MECHANICAL CODE WH WATER HEATER

IPC INTERNATIONAL PLUMBING CODE

NOTE:

THIS IS A STANDARD LIST OF COMMONLY USED MECHANICAL ABBREVIATIONS. SOME OF THE ABBREVIATIONS SHOWN ABOVE

MAY NOT BE USED IN THIS DRAWING PACKAGE.

MECHANICAL GENERAL NOTES

1. ALL MECHANICAL EQUIPMENT AND SYSTEMS SHALL BE INSTALLED IN ACCORDANCE WITH THE INTERNATIONAL MECHANICAL CODE

(IMC) LATEST EDITION, AND ALL APPLICABLE LOCAL AND STATE CODES.

2. ALL PLUMBING EQUIPMENT AND SYSTEMS SHALL BE INSTALLED IN ACCORDANCE WITH THE LATEST ADOPTED PLUMBING CODE, AND ALL LOCAL AND STATE CODES.

3. ALL MECHANICAL AND PLUMBING EQUIPMENT SHALL BE INSTALLED PER THE MANUFACTURER'S RECOMMENDATIONS.

4. MECHANICAL CONTRACTORS SHALL RECEIVE PRIOR APPROVAL FROM THE STRUCTURAL ENGINEER BEFORE MAKING CUTS

THROUGH ANY STRUCTURAL MEMBER.

5. MECHANICAL CONTRACTORS SHALL COORDINATE INSTALLATION WITH CONSTRUCTION SUPERVISOR AND WITH ALL OTHER

TRADES TO AVOID CONFLICTS.

6. THE MECHANICAL CONTRACTORS SHALL VERIFY MOTOR VOLTAGES WITH THE ELECTRICAL DRAWINGS PRIOR TO ORDERING

MOTORIZED EQUIPMENT AND CONTROLS.

7. SEE MECHANICAL SCHEDULE SHEET FOR SCHEDULED CAPACITIES OF ALL MECHANICAL EQUIPMENT AND MATERIALS SPECIFIED.

8. THE PLUMBING CONTRACTOR IS RESPONSIBLE FOR ALL BACKFLOW DEVICES TO INSPECTED BY A CERTIFIED BACKFLOW

TECHNICIAN BEFORE THE USE OF THE BUILDING POTABLE WATER SYSTEM.

9. ALL MECHANICAL EQUIPMENT TO BE PROPOSED MUST BE ON THE APPROVED LIST PRIOR TO SUBMITTALS. ALL APPROVED MANUFACTURERS MUST BE CAPABLE OF MEETING THE REQUIREMENTS OF THE SPECIFIED EQUIPMENT.

10. RUNOUT AND HOOKUP SIZES TO INDIVIDUAL PLUMBING FIXTURES CAN BE FOUND ON THE PLUMBING FIXTURE SCHEDULE.

11. PROVIDE REMOTE CEILING ACCESS BALANCE DAMPERS WITH CONCEALED CHROME PLATE COVERS FOR BALANCE DAMPERS

LOCATED ABOVE HARD CEILINGS.

12. PAINT VTR'S, FLUES, EXHAUST CAPS, AND OTHER MECHANICAL ITEMS ON THE ROOF TO MATCH THE ROOF COLOR.

13. MAINTAIN MINIMUM 10'-0" DISTANCE BETWEEN ALL FRESH AIR INTAKES AND EXHAUST OR GAS FLUE DISCHARGES.

14. LOCATE ACCESS HATCHCES SO AS TO PROVIDE OPTIMUM SERVICEABILITY TO EQUIPMENT AND/OR VALVING. SEE ARCHITECTURAL SPECIFICATION FOR TYPE AND COLOR. COORDINATE LOCATION WITH ARCHITECTURAL, STRUCTURAL, AND LIGHTING.

15. WHENEVER THERE IS A DISCREPANCY BETWEEN THE RUNOUT PIPE OR DUCT SIZE SHOWN ON THE PLANS AND THAT SHOWN IN

THE SCHEDULE, ALWAYS USE THE LARGER OF THE TWO PIPE OR DUCT SIZES.

16. THE CONTRACTOR SHALL BE HELD RESPONSIBLE FOR VERIFICATION OF EXISTING JOB CONDITIONS PRIOR TO BID. NO ADDITIONAL COST SHALL BE AWARDED TO THE SUCCESSFUL CONTRACTOR (OR THEIR SUBCONTRACTORS) AFTER BIDS HAVE BEEN SUBMITTED AND CONTRACTS AWARDED FOR FAILURE TO VERIFY EXISTING FIELD CONDITIONS. DISCREPANCIES BETWEEN ACTUAL FIELD CONDITIONS AND CONTRACT DOCUMENTS SHALL BE BROUGHT TO THE ATTENTION OF THE ENGINEER FOR ALTERNATIVE

METHODS OF INSTALLATION PRIOR TO THE BIDDING OF THIS PROJECT.

17. UNLESS OTHERWISE NOTED, ALL EXISTING MECHANICAL EQUIPMENT, PIPING, ETC, TO BE REMOVED SHALL BE DISPOSED OF BY THE CONTRACTOR UNDER THIS CONTRACT. THE OWNER SHALL RETAIN THE RIGHT TO KEEP ANY REMOVED ITEMS.

18. ALL DOMESTIC HOT AND COLD WATER LINES IN THE AREA OF WORK WHICH ARE NO LONGER IN USE DUE TO THIS PROJECT SHALL

BE REMOVED BACK TO THE MAINS AND CAPPED. NO DEAD LEGS ALLOWED.

19. HOLES IN EXISTING WALLS OR FLOORS SHALL BE PATCHED TO MATCH EXISTING WHERE PIPING, DUCTWORK, ETC, WERE

REMOVED OR ADDED DURING THIS PROJECT.

20. DAMAGE TO THE EXISTING FACILITY DURING THE CONSTRUCTION OF THIS PROJECT SHALL BE REPAIRED OR REPLACED BY THE

CONTRACTOR AT NO COST THE OWNER.

MECHANICAL AND PLUMBING DRAWINGS LEGEND

FLEXIBLE DUCTWORK THREE WAY CONTROL VALVE

DUCTWORK TWO WAY CONTROL VALVE

DUCTWORK BREAK PRESSURE REDUCING VALVE

DUCTWORK OR PIPING RISE GATE VALVE

CONCENTRIC SQUARE TO ROUND

TRANSITION

REDUCER

MOTORIZED DAMPER GLOBE VALVE

MANUAL VOLUME DAMPER BALL VALVE

SPIN-IN FITTING W/ AIR EXTRACTOR

AND HAND DAMPER

BUTTERFLY VALVE

HIGH EFFICIENCY FITTING W/ HAND DAMPER BALANCE VALVE

SWITCH CHECK VALVE

THERMOSTAT FLOOR CLEANOUT

HUMIDISTAT WALL CLEANOUT

TEMPERATURE SENSOR GRADE CLEANOUT

CARBON DIOXIDE SENSOR WATER HAMMER ARRESTOR

CARBON MONOXIDE SENSOR FLOOR DRAIN

NITROUS OXIDE SENSOR FLOOR SINK

DUCT SMOKE DETECTOR GAS PRESSURE REGULATOR W/ GAS COCK

COMBINATION SMOKE/FIRE DAMPER PRESSURE RELIEF VALVE

FIRE DAMPER VENT-THROUGH-ROOF

SMOKE DAMPER VENT

EQUIPMENT CALLOUT SOIL, WASTE, OR SANITARY SEWER

TURNING VANES ACID WASTE LINE

INTAKE OR EXHAUST ACID VENT LINE

DIRECTION OF AIRFLOW STORM DRAIN

SUPPLY DIFFUSER ROOF DRAIN LINE

RETURN GRILLE OVERFLOW DRAIN LINE

EXHAUST GRILLE CONDENSATE DRAIN LINE

FLOOR GRILLE DOMESTIC COLD WATER (CW)

CEILING EXHAUST FAN DOMESTIC HOT WATER (HW)

TEMPERATURE GAUGE DOMESTIC HOT WATER RETURN (HWR)

PRESSURE GAUGE (LIQUID

FILLED W/ ISOLATION VALVE)

TEMPERED WATER (TW)

TEMPERATURE SENSOR (DUCT OR PIPING) MEDIUM PRESSURE NATURAL GAS

FLOW SWITCH LOW PRESSURE NATURAL GAS

STAINLESS STEEL BRAIDED FLEX

CONNECTION

FIRE SPRINKLER LINE

ELASTOMETRIC FLEX CONNECTOR GEOTHERMAL WATER SUPPLY

SUCTION DIFFUSER GEOTHERMAL WATER RETURN

Y TYPE STRAINER (1-1/2" OR LARGER

PROVIDED W/ BLOW DOWN VALVE)

CHILLED WATER SUPPLY

FLOW DIRECTION CHILLED WATER RETURN

DEMOLITION / EQUIPMENT TO BE REMOVED CONDENSER WATER SUPPLY

NEW TO EXISTING CONNECTION POINT CONDENSER WATER RETURN

(E) EXISTING HEATING WATER SUPPLY

(F) FUTURE HEATING WATER RETURN

(N) NEW LIQUID REFRIGERANT LINE

REDUCED PRESSURE

BACKFLOW PREVENTER

SUCTION REFRIGERANT LINE

DOUBLE CHECK BACKFLOW PREVENTER SLOPE PIPE IN DIRECTION OF ARROW

UNION PIPE ANCHOR

AIR VENT PIPE GUIDE

TRIPLE DUTY VALVE CAP

NOTE:

THIS IS A LIST OF COMMONLY USED MECHANICAL AND PLUMBING SYMBOLS. SOME OF THE SYMBOLS SHOWN ABOVE

MAY NOT BE USED IN THIS DRAWING PACKAGE.

A. COMPLIANCE WITH THE LATEST ADOPTED EDITION OF THE INTERNATIONAL ENERGY CONSERVATION CODE IS REQUIRED FOR THIS PROJECT. THESE NOTES COVER MANDATORY REQUIREMENTS OF THE CODE. ADDITIONAL REQUIREMENTS ARE NOTED ON

THE DRAWINGS AND IN THE SPECIFICATIONS.

B. MINIMUM REQUIREMENTS FOR SUPPLY AND RETURN DUCTWORK INSULATION:

R-6: DUCTS LOCATED IN DIRECTLY OR INDIRECTLY CONDITIONED SPACES INSIDE THE BUILDING THERMAL ENVELOPE (SUCH AS

ABOVE A CEILING, IN A WALL, IN A SOFFIT, OR IN A CHASE/SHAFT).

R-12: DUCTS LOCATED OUTSIDE THE BUILDING THERMAL ENVELOPE (SUCH AS IN A COLD ATTIC OR ON THE ROOF).

C. CONTRACTOR SHALL VERIFY WITH THE MANUFACTURER, THE R-VALUES OF THE ACTUAL INSULATION USED. R-VALUES SHALL BE

INSTALLED VALUES.

D. WHERE DUCTS USED FOR COOLING ARE EXTERNALLY INSULATED, THE INSULATION SHALL BE COVERED WITH A VAPOR RETARDER HAVING A MAXIMUM PERMEANCE OF 0.05 PERM OR ALUMINUM FOIL HAVING A MINIMUM THICKNESS OF 2 MILS.

INSULATION HAVING A PERMEANCE OF 0.05 PERMS OR LESS SHALL NOT BE REQUIRED TO BE COVERED. ALL JOINTS AND SEAMS

SHALL BE SEALED TO MAINTAIN THE CONTINUITY OF THE VAPOR RETARDER.

E. ALL DUCT JOINTS, SEAMS, AND CONNECTIONS SHALL BE FASTENED AND SEALED WITH WELDS, GASKETS, ADHESIVES, MASTIC- PLUS-EMBEDDED-FABRIC SYSTEMS, OR TAPES. TAPES AND MASTICS SHALL BE LISTED AND LABELED PER UL181A OR UL181B.

DUCT TAPE IS NOT PERMITTED AS A SEALANT ON ANY METAL DUCTS. DUCT CONNECTIONS TO FLANGES OR EQUIPMENT SHALL BE

SEALED AND MECHANICALLY FASTENED.

F. MINIMUM REQUIREMENTS (THICKNESS) FOR PIPING INSULATION: REFER TO PROJECT SPECIFICATIONS.

G. DOMESTIC HOT WATER PIPING SYSTEMS SHALL BE INSULATED WITH 1" INSULATION HAVING A CONDUCTIVITY NOT EXCEEDING

0.27 BTU-INCH/HOUR-FT2-°F.

H. DOMESTIC WATER HEATERS WHICH ARE NOT PROVIDED WITH INTEGRAL HEAT TRAPS AND SERVE NONCIRCULATING SYSTEMS SHALL BE PROVIDED WITH HEAT TRAPS ON THE SUPPLY AND DISCHARGE PIPING AT THE WATER HEATER.

I. DOMESTIC HOT WATER SYSTEMS WITH RECIRCULATION PUMPS OR ELECTRIC HEAT TRACE SHALL BE CONTROLLED WITH 7-DAY

TIME CLOCKS.

J. AN OPERATING AND MAINTENANCE MANUAL SHALL BE PROVIDED PRIOR TO ISSUANCE OF A CERTIFICATE OF OCCUPANCY. THE

O&M MANUAL SHALL CONTAIN THE FOLLOWING INFORMATION AS A MINIMUM:

a. EQUIPMENT CAPACITY (INPUT & OUTPUT).

b. EQUIPMENT OPERATING AND MAINTENANCE INSTRUCTIONS.

c. CONTROL SYSTEM MAINTENANCE AND CALIBRATION INFORMATION, INCLUDING WIRING DIAGRAMS, SCHEMATICS, AND

CONTROL SEQUENCES.

d. CONTROL SYSTEM SETPOINTS SHALL BE SHOWN ON CONTROL DRAWINGS, AT CONTROL DEVICES, OR IN PROGRAMMING

COMMENT ON DDC SYSTEMS.

e. A COMPLETE WRITTEN NARRATIVE ON HOW EACH MECHANICAL SYSTEM IS INTENDED TO OPERATE.

ENERGY CODE COMPLIANCE

651 2 3

JOB N0.:

CHECKED BY:

SHEET NO.

DRAWN BY:

DATE:

APPROVAL AREA

234 S. WHISPERWOOD WAY

BOISE, IDAHO 83709

(208) 384-0585

MUSGROVE ENGINEERING P.A.

MECHANICAL ENGINEER

CONSULTANTS:

8727 W. ARDENE, SUITE 102

BOISE, IDAHO 83709

(208) 345-7127

EIDAM AND ASSOCIATES

ELECTRICAL ENGINEER

PHASE:

is unlawful and subject to criminal prosecution.

STAMP:

Project No. 24-435

:4 :4

M A u to d e s k D o c s

/A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l/ A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l M

P R

.r v t

M0.0

24308.01

ADA COUNTY

MECHANICAL

COVER SHEET

02/02/2026

26004 - ADA

COUNTY MORRIS

HILL WAREHOUSE

REMODEL 2026

Bid Set

M R

K D

A T

E D

E S

C R

T T

1 2 3 4

14X18 (E)

EG(E)

200CFM

1 2 3 4

14X18 (E)

EG(E)

200CFM

(UH-5)

(UH-6)

(UH-4)

(UH-3)

(UH-1) (UH-2)

15 15

11 11

651 2 3

JOB N0.:

CHECKED BY:

SHEET NO.

DRAWN BY:

DATE:

APPROVAL AREA

234 S. WHISPERWOOD WAY

BOISE, IDAHO 83709

(208) 384-0585

MUSGROVE ENGINEERING P.A.

MECHANICAL ENGINEER

CONSULTANTS:

8727 W. ARDENE, SUITE 102

BOISE, IDAHO 83709

(208) 345-7127

EIDAM AND ASSOCIATES

ELECTRICAL ENGINEER

PHASE:

is unlawful and subject to criminal prosecution.

STAMP:

Project No. 24-435

:4 :4

M A u to d e s k D o c s

/A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l/ A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l M

P R

.r v t

M1.0

24308.01

ADA COUNTY

FIRST FLOOR HVAC

PLANS

02/02/2026

26004 - ADA

COUNTY MORRIS

HILL WAREHOUSE

REMODEL 2026

Bid Set

3/32" = 1'-0"E1 FIRST FLOOR HVAC DEMOLITION PLAN

KEYED NOTES:

SYMBOL USED FOR CALLOUT#

1. EXISTING COOLER/FREEZER TO BE REMOVED. ALL EXISTING

CONDENSING EQUIPMENT LOCATED ON LID TO BE REMOVED. SEE

WALK-IN COOLER/FREEZER RECOVERY NOTES. SEE ROOF HVAC

DEMOLITION PLAN.

2. EXISTING FAN COIL UNIT TO REMAIN.

3. REMOVE EXISTING EXHAUST GRILLE AND PRESERVE FOR

RELOCATION. SEE FIRST FLOOR HVAC PLAN FOR NEW LOCATION.

4. REMOVE EXISTING TRANSFER GRILLES AND DUCT.

5. REMOVE EXISTING FAN COIL UNIT AND ASSOCIATED REFRIGERANT

PIPING. SEE SECOND FLOOR HVAC DEMOLITION PLAN FOR

ASSOCIATED CONDENSING UNIT.

6. REMOVE ENTIRE EXISTING HVAC SYSTEM. SEE SECOND FLOOR

HVAC DEMOLITION PLAN FOR ASSOCIATED MECHANICAL

EQUIPMENT.

7. REMOVE ENTIRE EXISTING HVAC SYSTEM. SEE ROOF HVAC

DEMOLITION PLAN FOR ASSOCIATED MECHANICAL EQUIPMENT.

8. EXISTING CONDENSING UNIT TO BE RELOCATED. SEE FIRST FLOOR

HVAC PLAN FOR NEW LOCATION.

9. EXISTING DRYERS TO BE RELOCATED. DISCONNECT AND REMOVE

EXISTING DRYER VENT UP THROUGH ROOF. SEAL ROOF

PENETRATION. SEE FIRST FLOOR HVAC PLAN.

10. CONNECT NEW DRYER VENT TO RELOCATED DRYER. ROUTE VENT

STRAIGHT UP THROUGH ROOF. SEE ROOF HVAC PLAN.

11. SEE SECOND FLOOR HVAC PLAN FOR ASSOCIATED UNIT HEATER

LOCATION.

12. INSTALL EXHAUST GRILLE IN NEW LOCATION. BALANCE TO 300 CFM.

13. FULL SIZE DUCT FROM ROOF MOUNTED EXHAUST FAN. TERMINATE

8-FEET A.F.F. WITH AN EXPANDED METAL SCREEN WITH A 1-INCH

FRAME. SEE SECOND FLOOR HVAC PLAN.

14. INSTALL CONDENSING UNIT IN NEW LOCATION. CONNECT TO

EXISTING REFRIGERANT LINES.

15. THERMOSTAT INSTALLED ON EXTERIOR WALL SHALL BE PROVIDED

WITH INSULATED BACK.

16. EXISTING ELECTRIC HEATER TO REMAIN.

3/32" = 1'-0"E4 FIRST FLOOR HVAC PLAN

M R

K D

A T

E D

E S

C R

C O

O L E

R R

E V

N S

VENTILATION NOTES:

A. WAREHOUSE TO BE SERVED BY PASSIVE VENTILATION

a. 4% OF FLOOR AREA PROVIDED BY OPERABLE

DOORS

WALK-IN COOLER/FREEZER

RECOVERY NOTES:

A. ALL REFRIGERANT FROM COOLER/FREEZER SYSTEM IS TO

BE RECOVERED.

a. PACKAGE, PALLETIZE, AND RETURN REFRIGERANT

TO OWNER.

B. ALL REFRIGERATION EQUIPMENT LOCATED ON

COOLER/FREEZER LID TO BE RECOVERED.

a. DISASSEMBLE, PACKAGE, PALLETIZE, AND RETURN

REFRIGERATION EQUIPMENT TO OWNER.

C. ALL ROOFTOP CONDENSER UNITS TO BE RECOVERED.

a. DISASSEMBLE, PACKAGE, PALLETIZE, AND RETURN

CONDENSER UNITS TO OWNER.

1 1

1 2 3 4

10 10

651 2 3

JOB N0.:

CHECKED BY:

SHEET NO.

DRAWN BY:

DATE:

APPROVAL AREA

234 S. WHISPERWOOD WAY

BOISE, IDAHO 83709

(208) 384-0585

MUSGROVE ENGINEERING P.A.

MECHANICAL ENGINEER

CONSULTANTS:

8727 W. ARDENE, SUITE 102

BOISE, IDAHO 83709

(208) 345-7127

EIDAM AND ASSOCIATES

ELECTRICAL ENGINEER

PHASE:

is unlawful and subject to criminal prosecution.

STAMP:

Project No. 24-435

:4 :4

M A u to d e s k D o c s

/A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l/ A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l M

P R

.r v t

M2.0

24308.01

ADA COUNTY

SECOND FLOOR

HVAC PLANS

02/02/2026

26004 - ADA

COUNTY MORRIS

HILL WAREHOUSE

REMODEL 2026

Bid Set

KEYED NOTES:

SYMBOL USED FOR CALLOUT#

1. REMOVE EXISTING UNIT HEATER AND ASSOCIATED ACCESSORIES.

SEAL ROOF VENT PENETRATION.

2. EXISTING CONDENSING UNIT TO REMAIN AS-IS.

3. REMOVE ENTIRE EXISTING HVAC SYSTEM. SEE ROOF HVAC

DEMOLITION PLAN FOR ASSOCIATED MECHANICAL EQUIPMENT.

4. REMOVE EXISTING FAN COIL AND CONDENSING UNIT. REMOVE

ASSOCIATED DUCTWORK, GRILLES, ETC. REMOVE FLUE AND

OUTSIDE AIR DUCTWORK UP THROUGH ROOF. SEAL ROOF

PENETRATION.

5. REMOVE EXISTING FAN COIL. REMOVE ASSOCIATED DUCTWORK,

GRILLES, ETC. REMOVE FLUE AND OUTSIDE AIR DUCTWORK UP

THROUGH ROOF. SEAL ROOF PENETRATIONS. SEE ROOF HVAC

DEMOLITION PLAN FOR CONDENSING UNIT.

6. REMOVE EXISTING CONDENSING UNIT AND ASSOCIATED

REFRIGERANT PIPING.

7. REMOVE EXISTING DRYER VENT UP THROUGH ROOF. SEAL ROOF

PENETRATION. SEE FIRST FLOOR HVAC PLAN.

8. ROUTE FULL SIZE DUCT FROM ROOF MOUNTED EXHAUST FAN DOWN

AND ALONG WALL. SEE FIRST FLOOR HVAC PLAN.

9. NEW DRYER VENT UP THROUGH ROOF. SEE ROOF HVAC PLAN.

10. INSTALL UNIT HEATER SUCH THAT THE BOTTOM OF THE UNIT IS

2-FEET BELOW BUILDING STRUCTURE. VENT UNIT HEATER UP

THROUGH ROOF. SEE CONCENTRIC VENT DETAIL.

3/32" = 1'-0"E1 SECOND FLOOR HVAC DEMOLITION PLAN

3/32" = 1'-0"E4 SECOND FLOOR HVAC PLAN

M R

K D

A T

E D

E S

C R

8 8

1 2 3 4

651 2 3

JOB N0.:

CHECKED BY:

SHEET NO.

DRAWN BY:

DATE:

APPROVAL AREA

234 S. WHISPERWOOD WAY

BOISE, IDAHO 83709

(208) 384-0585

MUSGROVE ENGINEERING P.A.

MECHANICAL ENGINEER

CONSULTANTS:

8727 W. ARDENE, SUITE 102

BOISE, IDAHO 83709

(208) 345-7127

EIDAM AND ASSOCIATES

ELECTRICAL ENGINEER

PHASE:

is unlawful and subject to criminal prosecution.

STAMP:

Project No. 24-435

:4 :4

M A u to d e s k D o c s

/A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l/ A d a C o u n ty

M o rr is

H il l W a re h o u s e R e m o d e l M

P R

.r v t

M3.0

24308.01

ADA COUNTY

ROOF HVAC PLANS

02/02/2026

26004 - ADA

COUNTY MORRIS

HILL WAREHOUSE

REMODEL 2026

Bid Set

KEYED NOTES:

SYMBOL USED FOR CALLOUT#

1. REMOVE DRYER VENT FROM BELOW. SEAL ROOF PENETRATION.

2. REMOVE EXISTING COOLER/FREEZER CONDENSING UNIT AND

ASSOCIATED EQUIPMENT. FILL/SEAL ROOF PENETRATIONS. SEE

WALK-IN COOLER/FREEZER RECOVERY NOTES. SEE FIRST FLOOR

HVAC DEMOLITION PLAN.

3. REMOVE EXISTING PACKAGED ROOFTOP UNIT AND ASSOCIATED

DUCTWORK AND ACCESSORIES. SEAL ROOF PENETRATIONS.

4. REMOVE EXISTING CONDENSING UNIT AND ASSOCIATED

ACCESSORIES. SEAL ROOF PENETRATIONS.

5. REMOVE EXISTING WAREHOUSE VENTILATION FAN. SEAL ROOF

PENETRATION.

6. EXISTING MECHANICAL EQUIPMENT TO REMAIN AS-IS.

7. SEE EXHAUST FAN MOUNTING DETAIL.

8. UNIT HEATER VENT FROM BELOW. SEE HVAC FLOOR PLANS.

9. DRYER VENT FROM BELOW. SEE CLOTHES DRYER INSTALLATION

DETAIL.

3/32" = 1'-0"E4 ROOF HVAC PLAN

M R

K D

A T

E D

E S

C R

C O

O L E

R R

E V

N S

3/32" = 1'-0"E1 ROOF HVAC DEMOLITION PLAN

WALK-IN COOLER/FREEZER

RECOVERY NOTES:

A. ALL REFRIGERANT FROM COOLER/FREEZER SYSTEM IS TO

BE RECOVERED.

a. PACKAGE, PALLETIZE, AND RETURN REFRIGERANT

TO OWNER.

B. ALL REFRIGERATION EQUIPMENT LOCATED ON

COOLER/FREEZER LID TO BE RECOVERED.

a. DISASSEMBLE, PACKAGE, PALLETIZE, AND RETURN

REFRIGERATION EQUIPMENT TO OWNER.

C. ALL ROOFTOP CONDENSER UNITS TO BE RECOVERED.

a. DISASSEMBLE, PACKAGE, PALLETIZE, AND RETURN

CONDENSER UNITS TO OWNER.

REMARKS:

1. APPROVED ALTERNATE MANUFACTURERS: HASTINGS, TRANE, MODINE, AND STERLING.

2. PROVIDE UNIT WITH MANUAL SUMMER/WINTER SWITCH, THERMOSTAT AND RELAY KIT, 65° DOWNTURN NOZZLE WITH HORIZONTAL LOUVERS, AND 4-POINT SUSPENSION KIT.

GAS-FIRED UNIT HEATER SCHEDULE

SYMBOL AREA SERVED UNIT TYPE

FAN ELECTRICAL GAS HEATING

OPERATING WEIGHT (LBS) MANUFACTURER AND MODEL REMARKS

CFM RPM HP V/Ø AMPS

INPUT

(MBH)

OUTPUT

(MBH)

UH-1 WAREHOUSE

HORIZONTAL /

SEPARATED

COMBUSTION

1345 1050 1/4 115/1 4.3 105 87.15 101 REZNOR MODEL UDXC 100 1 , 2

UH-2 WAREHOUSE

HORIZONTAL /

SEPARATED

COMBUSTION

1345 1050 1/4 115/1 4.3 105 87.15 101 REZNOR MODEL UDXC 100 1 , 2

UH-3 WAREHOUSE

HORIZONTAL /

SEPARATED

COMBUSTION

1345 1050 1/4 115/1 4.3 105 87.15 101 REZNOR MODEL UDXC 100 1 , 2

UH-4 WAREHOUSE

HORIZONTAL /

SEPARATED

COMBUSTION

1345 1050 1/4 115/1 4.3 105 87.15 101 REZNOR MODEL UDXC 100 1 , 2

UH-5 WAREHOUSE

HORIZONTAL /

SEPARATED

COMBUSTION

1345 1050 1/4 115/1 4.3 105 87.15 101 REZNOR MODEL UDXC 100 1 , 2

UH-6 WAREHOUSE

HORIZONTAL /

SEPARATED

COMBUSTION

1345 1050 1/4 115/1 4.3 105 87.15 101 REZNOR MODEL UDXC 100 1 , 2

EXHAUST FAN SCHEDULE

SYMBOL AREA SERVED UNIT TYPE

BLOWER ELECTRICAL

MAXIMUM

SONES

OPERATING

WEIGHT

(LBS)

MANUFACTURER AND MODEL REMARKS

CFM ESP

MAXIMUM

RPM

DRIVE HP/W V/Ø

EF-1W CHARGING STATION ROOF UPBLAST 175 0.5 1550 DIRECT 67 115/1 6.0 55 COOK MODEL 90R15DH 1 , 2 , 3

R…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Feb 27, 2026.