26Q2010 Attachment-1.pdf
PDF 112 KB Posted
- Attached to
- Grit, Cast Steel Federal contract opportunity
- Solicitation number
- SPMYM326Q2010
About this file
This document is a federal contract attachment for an abrasive material procurement, specifically for Ferrous Metallic Grit. The contract (SPMYM326Q2010) details the procurement of a specialized abrasive material with specific technical requirements: a grit size of 25/40 (50/50 pre-mix), Rockwell "C" hardness range of C-50 to C-65, packaged in 55-gallon drums weighing 1,700 lbs each. The material must comply with commercial specification SSPC-AB-3, and the contractor is required to provide a Certificate of Quality Conformance (referenced in Exhibit A, Sequence A001).
The contract specifies that the material will be commercially packaged and secured to pallets to allow safe movement over uneven terrain with minimal load shifting. Inspection and acceptance will occur at the destination, and there is a provision for mercury control for supplies. The contract was printed on 12/10/2024 and digitally signed by Heather S. Sweeney, indicating an upcoming or recently awarded procurement for this specialized abrasive material.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM326Q2010 RFQ.docx | DOCX document | |
| SPMYM326Q2010 Combined Synopsis Solicitation.docx | DOCX document | |
| Clauses - Full Text Provisions and Clauses.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT
PRINTED 12/10/2024 ATTACHMENT PAGE
5350 5A
ITEM NO.
SECTION B
STOCK NUMBER
5350-LL-DM1-0080
SMIC
5R
ITEM NAME ABRASIVE, FERROUS METALLIC GRIT
SPECIAL CHARACTERISTICS
GRIT SIZE:25/40 (50/50 PRE-MIX)
ROCKWELL "C" HARDNESS RANGE: C-50 TO C-65
55 GAL DRUM (1700 LBS PER DRUM).
C DESCRIPTION/SPECIFICATIONS
C.1 MATERIAL TO BE PROVIDED IN ACCORDANCE WITH COMMERCIAL SPECIFICATION SSPC-AB-3.
SIZE OF GRIT/SHOT AND HARDNESS RANGES SHALL BE AS SPECIIED IN SECTION B
OF THIS SCHEDULE
C.2 DATA REQUIREMENTS:
C.2.1 CERT. OF QUALITY CONF., SEE EXHIBIT A, SEQUENCE A001
C.3 C500 MERCURY CONTROL (SUPPLIES)
D PRESERVATION/PACKAGING/PACKING
D.1 D4 PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)
D.2 MATERAIL WILL BE SECURED TO PALLETS IN A MANNER TO ALLOW SAFE MOVEMENT OVER
UNEVEN TERRAIN WITH MINIMAL SHIFTING OF THE LOAD
E INSPECTION ACCEPTANCE
E.1 E1 RESPONSIBILITY FOR INSPECTION
E.2 E2 INSPECTION AND ACCEPTANCE (DESTINATION)
H SPECIAL PROVISIONS
K Section
L Section
M Section
Digitally signed by SWEENEY.HEATHER.S.1455804520 Date: 2024.12.10 09:54:31 -05'00' SWEENEY.HEATHER.S.1455804520
SPMYM326Q2010
File details come from the government source that posted it. Updated .