Design and Fabrication_Market Survey.pdf

MARKET SURVEY ANNOUNCEMENT

1. Introduction/Purpose

The FAA has a requirement for the design and fabrication of an aluminum platform, complete with ladders and railing, to bridge over Cab equipment and have access to shades above the Cab glass for maintenance purposes.

Period of performance for services is as follows:

Base: 3/01/2017 – 4/30/2017

2. Incumbent Contractor

None

3. Nature of Competition

The acquisition strategy for the procurement has not been determined at this time;

however, either an unrestricted competition or a set-aside will be chosen depending on the responses to the market survey

4. Limitations of Market Survey

(a) This is not a Screening Information Request or Request for Proposals of any kind;

(b) The FAA is not seeking or accepting unsolicited proposals;

(c) The FAA will not pay for any information received or costs incurred in preparing the response to the market survey; and

(d) Any costs associated with the market survey submittal is solely at the interested vendor’s expense

5. North American Industry Classification System (NAICS) Code

332999

6. Submittal Requirements for Market Survey

Include in response corporate experience, comments on the requirements, technical approach and corporate capabilities and attached business declaration form and 8(a) certificate, if applicable.

7. Delivery of Submittals

Submittals must be received by no later than February 7, 2017 and must be submitted to the following:

Spencer Adam spencer.ctr.adam@faa.gov

817-222-4981

9. Attachments

(a) Draft Statement of Work/Specification

(b) Business Declaration Form mailto:spencer.ctr.adam@faa.gov