2627-030MC Scope of Work.pdf
PDF 933 KB Posted
- Attached to
- Roth Community Facade Rehabs
- Solicitation number
- 2140739
- Issued by
- Suffolk County, New York
About this file
This is a Request for Qualifications (RFQ) issued by Stony Brook University for consulting design services related to facade rehabilitation at the Roth Community residence halls. The project involves the repair and rehabilitation of concrete, masonry, and spandrel beam facades at five residence hall buildings (Whitman Hall, Cardoza Hall, Hendrix Hall, Mount Hall, and Gershwin Hall) located at 100 Nicolls Road, Stony Brook, New York. The scope encompasses addressing deterioration including spalling at cast-in-place concrete, exposed deteriorated rebar, cracking and shifting at precast window sills, efflorescence at brick mortar, and deteriorated flashing across all five buildings constructed in 1967. Prospective firms must provide a comprehensive qualification package demonstrating relevant experience, technical capabilities, and available resources, and must submit three example projects completed within the past five years of similar size, scope, and complexity. While an in-person pre-bid meeting is not required, the University recommends that respondents conduct self-directed site visits to familiarize themselves with existing conditions, noting that SUNY Stony Brook is an open campus accessible for exterior viewing only. The design phase is expected to be completed within four to six months, progressing through schematic design (20%), design submission (60%), ninety percent (90%) construction documents, and one hundred percent (100%) construction documents, with construction and repairs to be phased over time with scheduling to be determined.
The consultant's fee shall be negotiated with the selected qualified firm and must include a single, fixed, all-inclusive amount for all design services, construction phase services, and general administration services, with no additional compensation for site visits, meetings, field observations, or corrective efforts. The all-inclusive pricing must encompass field administration and inspections at a minimum frequency of twice monthly for the consultant and subconsultants when work in their specialty is in progress, submittal and RFI tracking with fifteen working days for review and comment, progress and closeout support including change order documentation and monthly progress reports, and post-construction inspections including pre-occupancy punch list inspection and mandatory guarantee inspection forty-five to sixty days prior to the end of the one-year general contractor guarantee period. The consultant is required to provide a subconsultant staffing list identifying the percentage of work completed by each subconsultant and indicating whether each is a Minority or Women Owned Business. The program budget will be developed by the consultant, and detailed record drawings and site condition reports are available upon request by contacting CPDC's Inventory Control Manager. Selection of the qualified consultant will be made by a Selection Committee formed in accordance with SUNY Policy 7555 based on demonstrated competence and qualifications using the Consultant Selection Rating Form 7555-06.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Supplier Portal Instructions.pdf | ||
| 2627-030MC Vendor Report.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Request for Qualifications
Roth Community Facade Rehabs
26/27-030MC
November 10, 2026
Building/Site: Roth Community
Building No. 061- Whitman Hall
062- Cardoza Hall
063- Hendrix Hall
064- Mount Hall
065- Gershwin Hall
Room No(s). N/A - All buildings - exterior repairs
Project: Repair & rehabilitate concrete, masonry and spandrel beam facades
100 Nicolls Rd. Stony Brook NY 11794 Atten: Thomas Ferrari
26/27-030MC Roth Community Facade Rehab
1 Request for Qualifications The University is seeking a consulting firm to provide design services to repair and rehabilitate the concrete, masonry and spandrel beam facades at the Roth Community residence hall buildings on the west campus of Stony Brook University. The proposed repairs are necessary to address deterioration resulting from weathering, normal wear and tear, and damage to existing concrete and brick elements, in order to maintain the structural integrity, safety, and overall condition of the facility. Roth Community comprises five residence hall buildings and one dining hall.
2 Instructions Firms responding to this Request for Qualifications shall submit their qualification package in accordance with the requirements outlined herein and by the submission deadline specified in the sourcing event.
2.1 Format of Statement of Qualifications
Prospective engineering firms shall provide a qualification package that clearly demonstrates the firm’s qualifications, relevant experience, technical capabilities, and available resources necessary to successfully execute a project comparable in scope, complexity, and magnitude to the proposed project.
2.2 Pre-Bid Meeting
This RFQ does not require a site visit. However, the University recommends that respondents visit the Roth Community prior to submitting a RFQ package so that the respondents can become familiar with the existing conditions. Please note: SUNY Stony Brook is an open campus and visitors can walk the campus exterior only, and not inside the building(s).
2.3 RFQ Process and Evaluation Criteria
As per SUNY Policy 7555, a Selection Committee will be formed to review submittals. The basis for selection for all consultant agreements shall be demonstrated competence and qualifications for the type of service required. Firms will be evaluated based on the Consultant Selection Rating Form, 7555-06.
2.4 References
Bidders must provide three (3) example projects completed in the past five (5) years. Example projects must be of similar size, scope and complexity to the project currently being bid, as further described in the Description of Work. Each project must include the Owner/Agency, Award Date, Contract Amount, Date Completed, Contact Person, Telephone number of the contact, General Contractor, Contract Number, Contact Email, and the Project Title and a brief scope description. Reference contacts may be used to verify project size, scope, dollar value, percentages and quality of performance.
** Please ensure reference contact information is up to date **
2.5 Additional Information
The following exterior face building issues are observed.
● Spalling at exposed cast-n place concrete and cast in place concrete spandrel beams
● Exposed and deteriorated rebar is seen at many locations, possibly due to insufficient concrete cover
● Cracking and shifting at precast window sills
● Efflorescence at brick mortar
● Deteriorated flashing
● All buildings display similar deteriorations
3 Scope of Services
3.1 Background
The Roth Community complex comprises five residence hall buildings: Whitman Hall, Cardozo Hall, Hendrix Hall, Mount Hall, and Gershwin Hall. There is also a dining facility; Roth Cafe.
Roth Cafe is not included in the scope of work under this RFQ. All of the buildings were completed in 1967. All of the buildings have identical architectural and structural details. The Residence halls have two different plan layouts. The maximum height of the buildings are 3 and 4 stories with basements, crawl spaces, and penthouses. Structurally, all buildings utilize the same system; concrete framing with 8” thick flat plate concrete slabs. All concrete elements were poured in place. Exterior concrete elements of the buildings’ structure - primarily spandrel beams and window sills - are exposed to elements; they have no architectural finishes/cladding. The buildings are supported by spread footings with grade beams supporting exterior brick infill walls. Exterior bays of the open frame facade are filled with masonry infill walls consisting of 4" face brick and 4” CMU back-up. There are also monolithic pour in-place concrete end walls located at various locations of the exterior facades. Poured in place concrete stairs are typically located internal to the buildings.
● Roth Cafeteria Dining Hall Building is not included in this Request for Qualifications.
3.2 Available Data
Record drawings of site conditions and reports can be provided for reference only by completing the attached form and providing it to CPDC’s Inventory Control Manager, Greg Tarquinio, at;
gregory.tarquinio@stonybrook.edu;
Application for Access to CPDC Drawings.pdf
3.3 Scope of Services
The services sought under this Request for Qualifications include a comprehensive assessment and investigation of the building’s exterior façade systems; development of a comprehensive repair and restoration plan addressing, but not limited to, loose or deteriorated concrete, deteriorated flashing and weather barriers, and application of a masonry sealing system;
preparation of construction documents and cost estimates; bidding and procurement services; and construction administration services through completion of the work.
The University expects that the repairs will be done over the course of several phases.
3.4 Program Budget
The Program Budget will be developed by the consultant.
https://drive.google.com/file/d/1W0nIO2Cv2Wz_sv2nh_ocGOqALEuExjpV
3.5 Basic Design Fee
Fee shall be negotiated with the selected qualified consultant.
3.6 Subconsultant Staffing
The consultant shall provide a subconsultant staffing list for the project using Form 7555-15, 7555-16 or 7555-17. This subconsultant staffing list shall include the percent of work to be completed by each subconsultant and indicate whether each subconsultant is a Minority or Women Owned Business.
3.7 Time of Completion Schedule
Schematic Design 20% Assessment, Design Manual 60% Submission l, and 90% Construction Document and 100% Construction Document should be completed within 4 to 6 months duration for the design schedule. Construction / Repairs will be phased. Phasing and schedule to be determined.
3.8 Project Meetings, Site Observations, and Construction Administration The selected Design Professional shall conduct all site investigations, field verifications, coordination, and attend all project meetings and site visits as necessary to produce a complete, accurate, and fully biddable project delivery package and to satisfy the applicable standard of care and Proposals. Any resulting price quotation from a selected Design Professionals must provide a single, fixed, all-inclusive amount for all services described in this RFQ and all Construction Phase and General Administration services referenced herein, and shall include all labor, supervision, coordination, travel, mileage, per diem, administrative time, documentation, reporting, and all other direct and indirect costs necessary to perform such services.
No additional compensation, reimbursable expense, or change in fee shall be due for any additional or subsequent meetings, site visits, field observations, inspections, re-inspections, or other efforts that are necessary or advisable to complete the design, coordinate the work, correct errors or omissions, respond to Owner inquiries, or otherwise fulfill the Design Professional’s obligations, except to the extent the Owner issues a written, Owner-approved change in scope.
Furthermore, the proposal must fully incorporate (and the all-inclusive price quote shall be deemed to include) all Construction Phase and General Administration services as detailed in this RFQ and any resulting Agreement, including, without limitation:
● Field Administration & Inspections: Providing field observations and technical inspections at an average of not less than twice per month for the Consultant, and not less than twice per month for subconsultants when work in their specialty is in progress, strictly in accordance with the cost-threshold provisions of Section 5(c).
● Submittal & RFI Tracking: Reviewing and commenting on shop drawings, samples, and submittals within fifteen (15) working days of receipt, and managing project records.
● Progress & Closeout Support: Preparing Change Order documentation, reviewing contractor payment requisitions, conducting regular trade field meetings (including minute distribution), and submitting monthly progress reports.
● Post-Construction Inspections: Conducting the pre-occupancy punch list inspection, as well as the mandatory guarantee inspection forty-five (45) to sixty (60) days prior to the end of the one (1) year general contractor guarantee period.
Any proposal, quote or other terms and conditions submitted by the Design Professional that conflict with or modify the all-inclusive pricing and no additional compensation requirements are hereby rejected and shall be void and of no force or effect unless expressly accepted in a written amendment executed by the Owner.
File details come from the government source that posted it. Updated .