26-01103_PKGRQMT_REPORT.pdf
PDF 68 KB Posted
- Attached to
- FILTER, FLUID
- Solicitation number
- SPRTA126Q0345
- Issued by
-
Defense Logistics Agency Aviation
About this file
This document is a Packaging Requirements specification (AFMC Form 158) for federal contract procurement.
The packaging specification applies to item number 2945014795356NZ under Purchase Instrument Number FD20302601103-00, Version 2. Items must be packaged in accordance with MIL-STD-2073-1 (Standard Practice for Military Packaging) and marked according to MIL-STD-129 (Standard Practice for Military Marking), both current revisions. All wood packaging material (WPM)—including pallets, skids, crates, boxes, and dunnage—must be constructed from debarked wood and heat-treated to 56 degrees Centigrade (133 degrees Fahrenheit) for 30 minutes minimum. Heat treatment certification and marking must be provided by an accredited agency recognized by the American Lumber Standards Committee (ALSC) in compliance with International Standards for Phytosanitary Measures (ISPM 15) to prevent the spread of invasive species such as the pinewood nematode. Shipping containers require markings per MIL-STD-129, including any additional bar coding or unit serial numbers as specified on the AFMC Form 158. The unit pack specifications are 12.5 inches in length and width by 18.5 inches in depth with a weight of 9.00 pounds and cube of 1.673. This packaging requirement is classified as MIL Long Line Packaging at Preservation Level MIL and Packaging Level B. The specification was prepared by Richard R. Davis, Packaging Specialist with the 406 SCMS/GULAA office, and is dated 23 February 2026.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRTA126Q0345.pdf | ||
| 26-01103_IUID_REPORT.pdf | ||
| 26-01103_TRNSPDATA_REPORT.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
PURCHASE INSTRUMENT NUMBER: FD20302601103-00 VERSION: 2
MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN
PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAA MIL Long Line Packaging MIL B
ITEM(S):
2945014795356NZ
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
1 000 41 1 09 GB NA A NR 00 B 17 9.00 12.5 12.5 18.5 1.673 M
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
VENDOR PACKAGING INSTRUCTIONS:
Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.
ORGANIZATION / OFFICE SYMBOL:
406 SCMS / GULAA
PACKAGING SPECIALIST:
Davis, Richard R
PHONE NUMBER:
405-371-9037 / 582-5972
SIGNATURE:
//SIGNED//Davis, Richard R
DATE:
26054 - 23 FEB 2026
Page 1 of 1AFMC 158 Version 2Generated by PRPS using Jasper Reports on 25 Feb 2026
File details come from the government source that posted it. Updated .