25QA815 Attach.1 - Statement of Work.pdf
PDF 1 MB Posted
- Attached to
- Bobcat Skid Loader Repair
- Solicitation number
- FA462025QA815
About this file
This Statement of Work (SOW) details a repair contract for a T320 Bobcat Skid Loader at Fairchild Air Force Base in Washington. The contractor is required to provide labor, tools, and materials to replace an O-ring, install a new double gear pump, drain and replace 2.5 gallons of hydraulic fluid, and reassemble and test the equipment to ensure full operational status. All replacement parts must be Original Equipment Manufacturer (OEM) parts.
The work can be performed either on-base at Fairchild AFB or off-base, with the contractor responsible for coordinating with the 92d Civil Engineer Squadron if working on-site. The hours of operation are 0700-1630 Monday through Friday, excluding federal holidays, though alternative hours may be approved by the Contracting Officer. The contractor must adhere to Fairchild Air Force Base security regulations and will be required to submit a report detailing the work accomplished, including repair photos.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 25QA815 Combo.pdf | ||
| 25QA815 Attach. 2 - WD 2015-5537 (Rev 26).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
FOR
Bobcat Skid Loader Repair
August 2025
FA462025QA815 - Bobcat Skid Loader Repair Attach. 1 - Statement of Work
Statement of Work (SOW) For
Bobcat Skid Loader Repair Fairchild AFB, WA
1. DESCRIPTION OF SERVICE: The contractor shall provide all necessary tools, equipment, labor and materials required to replace O-ring, 2.5 gal. of hydraulic fluid, and the pump gear on a T320 Bobcat Skid Loader. All replacement parts shall be OEM
2. SCOPE OF WORK: The Contractor shall complete all work, which includes furnishing all supervision, labor, material, equipment and services, unless otherwise specified herein, required under this contract and in accordance with this Statement of Work (SOW).
1. Disassemble engine
a. Disassemble the engine to a level required to replace the following items:
i. O-ring
ii. Double Gear Pump
b. Drain/existing Hydraulic Fluid into approved containers and properly dispose at an off-base location
c. Refill Hydraulic Fluid (2.5 gal)
2. Reassemble and test to ensure the unit is fully operational
3. Objectives: To ensure the T320 Bobcat Skid loader is fully operational with the following deliverables
1. Report detailing all work accomplished on this contract, including photos of repairs, where applicable.
4. GOVERNMENT FURNISHED PROPERTY AND SERVICES: The government shall furnish site access, electrical power, In the event of an emergency, dial 911.
5. GENERAL INFORMATION
5.1. HOURS OF OPERATION: Hours of operation are 0700-1630 Monday through Friday, excluding Federal Holidays and any other designated down day. Work can be done at other than the normal hours of operation with the approval of the Contracting Officer. The contractor shall coordinate in advance all hours of work and any service interruptions with Civil Engineering points of contact.
5.2. SECURITY REQUIREMENTS: All personnel employed by the Contractor in the performance of this contract, or any representative of the Contractor entering the government installation, shall abide by all Fairchild Air Force Base security regulations.
6. PERFORMANCE PERIOD: Contractor shall include the period of performance along with their quote. The scope of work listed in paragraph 2 above may be accomplished by the contractor either on Fairchild AFB or by transporting the equipment off-base to perform the work.
6.1 Performing Work on Fairchild AFB: If the contractor elects to perform work on the equipment in place on Fairchild AFB, the contractor shall coordinate with the 92d Civil Engineer Squadron prior to performing work. All work areas shall be kept neat and clean and returned to their original state following the conclusion of work. Contractor shall provide all parts and tools required to perform work in place and shall remove all equipment after work is concluded.
6.2 Performing Work at a Location Other Than Fairchild AFB: If the contractor wishes to perform work off-base, they shall be responsible for transporting equipment on and off base following completion of work.
File details come from the government source that posted it. Updated .