2573-26 EMS 2nd Fl. Specs w dwgs REBID.pdf.crdownload

CRDOWNLOAD file 2 MB Posted Apr 17, 2026

Attached to: Eastern Middle School Select 2nd Floor Ceiling Replacements (re-bid)
Solicitation number: 2573-26
Issued by: Fairfield County, Connecticut

About this file

Written by GovTribe AI · May 4, 2026

This document consists of architectural specifications and construction drawings for the Eastern Middle School second floor ceiling replacement project issued by Greenwich Public Schools in Connecticut. The project scope encompasses the selective replacement of ceilings on the second floor of the educational facility located at 51 Hendrie Avenue, Riverside, Connecticut, with work including removal of existing suspended acoustical tile ceiling systems, installation of new 2x2 acoustical ceiling systems, reinstallation of ceiling-mounted devices, provision of expansion sleeves at expansion joints, painting of skylight wells, and reinstallation of salvaged roll-down shades. The bidding period runs from April 17, 2026 at 8:00 AM EDT through May 5, 2026 at 1:00 PM EDT, with a mandatory site walk-through scheduled for April 22, 2026 at 3:45 PM and a vendor question and answer period from April 17 through April 27, 2026 at 12:00 PM EDT. The project includes specific work areas designated as base bid (media center) and alternate #1 (corridor removals) on the partial second floor, with detailed reflected ceiling plans and specifications provided in accompanying drawings.

The specifications document provides comprehensive technical requirements for all trades including architectural, mechanical, electrical, and structural components necessary to complete the ceiling replacement work in compliance with the Building Code of Connecticut and applicable standards. The contractor is responsible for all debris removal, surface patching and finishing to match existing conditions, firestopping at all penetrations, seismic restraints where required, temporary dust protection, cable and ductwork support, and remedial cleanup upon project completion. Key contractor obligations include verification of dimensions and field conditions prior to work commencement, coordination with the owner on salvaged items storage, maintenance of building security daily, protection of occupied building areas, and adherence to minimum safety and security standards including worker photo identification badges and controlled material storage within designated fenced areas. No pricing information, set-asides, incumbent contractor data, or contract award timeline is disclosed in the specifications document.

Text of this file

http://www.fullerdangelo.com/

UNIT HEATER

AutoCAD SHX Text

UNDERWRITERS LABORATORY

AutoCAD SHX Text

VARIABLE AIR VOLUME

AutoCAD SHX Text

VINYL COMPOSITION TILE

AutoCAD SHX Text

VINYL WALL COVERING

AutoCAD SHX Text

WOMEN/WIDTH/WASHER

AutoCAD SHX Text

INCHES OF WATER, GAGE

AutoCAD SHX Text

WATER PRESSURE DROP

AutoCAD SHX Text

WALL RETURN

AutoCAD SHX Text

WATER RESISTANT

AutoCAD SHX Text

WELDED WIRE MESH

AutoCAD SHX Text

WELDED WIRE FABRIC

AutoCAD SHX Text

WALL TRANSFER GRILLE

AutoCAD SHX Text

WALL SUPPLY

AutoCAD SHX Text

WALL EXHAUST FAN

AutoCAD SHX Text

UNFINISHED

AutoCAD SHX Text

VOLUME DAMPER

AutoCAD SHX Text

UNIT VENTILATOR

AutoCAD SHX Text

VESTIBULE

AutoCAD SHX Text

VOLUME

AutoCAD SHX Text

VALVE

AutoCAD SHX Text

VERIFY IN FIELD

AutoCAD SHX Text

VISION PANEL

AutoCAD SHX Text

WOOD

AutoCAD SHX Text

WET BULB

AutoCAD SHX Text

WATER CLOSET

AutoCAD SHX Text

VELOCITY

AutoCAD SHX Text

(PRESSURE)

AutoCAD SHX Text

WIRE GLASS

AutoCAD SHX Text

WALL EXHAUST

AutoCAD SHX Text

WROUGHT IRON

AutoCAD SHX Text

WATER PROOF

AutoCAD SHX Text

WORK

AutoCAD SHX Text

WATER

AutoCAD SHX Text

YARD DRAIN

AutoCAD SHX Text

REVOLUTIONS PER MINUTE

AutoCAD SHX Text

SMOKE DETECTOR

AutoCAD SHX Text

STATIC PRESSURE

AutoCAD SHX Text

TEMPERATURE CONTROL

AutoCAD SHX Text

TEMPERATURE DIFFERENCE

AutoCAD SHX Text

TRIMMED OPENING

AutoCAD SHX Text

TOP OF PARAPET

AutoCAD SHX Text

TOTAL STATIC PRESSURE

AutoCAD SHX Text

SPECIFICATION (S)

AutoCAD SHX Text

SANITARY

AutoCAD SHX Text

SCHEDULE

AutoCAD SHX Text

SUPPLY AIR

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

SECTION

AutoCAD SHX Text

SIMILIAR

AutoCAD SHX Text

SQUARE FOOT

AutoCAD SHX Text

SMOKE DAMPER

AutoCAD SHX Text

ROOF TOP UNIT

AutoCAD SHX Text

SQUARE

AutoCAD SHX Text

STANDARD

AutoCAD SHX Text

STEAM

AutoCAD SHX Text

STEEL

AutoCAD SHX Text

SQUARE FEET

AutoCAD SHX Text

STAINLESS STEEL

AutoCAD SHX Text

SUCTION

AutoCAD SHX Text

SUSPENDED

AutoCAD SHX Text

STRUCTURAL

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

TEMPERED

AutoCAD SHX Text

THICK

AutoCAD SHX Text

TELEPHONE

AutoCAD SHX Text

TEMPERATURE

AutoCAD SHX Text

TRENCH DRAIN

AutoCAD SHX Text

TYPICAL

AutoCAD SHX Text

THERMOSTAT

AutoCAD SHX Text

TOP OF CURB

AutoCAD SHX Text

TOP OF STEEL

AutoCAD SHX Text

TREAD/TOILET

AutoCAD SHX Text

URINAL

AutoCAD SHX Text

PUMP(IN-LINE OR

AutoCAD SHX Text

PLUMBING CONTRACTOR

AutoCAD SHX Text

PRESSURE TREATED

AutoCAD SHX Text

POUNDS PER SQUARE INCH

AutoCAD SHX Text

ROOF EXHAUST FAN

AutoCAD SHX Text

RELATIVE HUMIDITY

AutoCAD SHX Text

PARTIAL

AutoCAD SHX Text

PANEL BOX

AutoCAD SHX Text

BASE MOUNTED)

AutoCAD SHX Text

PLATE

AutoCAD SHX Text

PLUMBING

AutoCAD SHX Text

PENTHOUSE

AutoCAD SHX Text

PAINT

AutoCAD SHX Text

PANEL

AutoCAD SHX Text

PLYWOOD

AutoCAD SHX Text

PRESSURE

AutoCAD SHX Text

QUARRY TILE

AutoCAD SHX Text

PREFABRICATED

AutoCAD SHX Text

PRESSURE DROP

AutoCAD SHX Text

RADIATION

AutoCAD SHX Text

ROOF DRAIN

AutoCAD SHX Text

RETURN AIR

AutoCAD SHX Text

RISER/RADIUS

AutoCAD SHX Text

REQUIRED

AutoCAD SHX Text

REINFORCED

AutoCAD SHX Text

ROOM

AutoCAD SHX Text

ROUGH OPENING

AutoCAD SHX Text

QUANTITY

AutoCAD SHX Text

ASBESTOS CONTAINING

AutoCAD SHX Text

ACOUSTICAL CEILING TILE

AutoCAD SHX Text

AIR CONDITIONING UNIT (S)

AutoCAD SHX Text

ASBESTOS CONTAINING WASTE

AutoCAD SHX Text

ABOVE FINISH FLOOR

AutoCAD SHX Text

BACK DRAFT DAMPER

AutoCAD SHX Text

AIR PRESSURE DROP

AutoCAD SHX Text

BRAKE HORSE POWER

AutoCAD SHX Text

COEFFICIENT, VALVE FLOW

AutoCAD SHX Text

CUBIC FEET PER MINUTE

AutoCAD SHX Text

CHILLED WATER RETURN

AutoCAD SHX Text

CEILING EXHAUST REGISTER/

AutoCAD SHX Text

CHILLED WATER SUPPLY

AutoCAD SHX Text

CORRUGATED METAL PIPE

AutoCAD SHX Text

BOILER FEED WATER

AutoCAD SHX Text

COMPUTER ROOM UNIT

AutoCAD SHX Text

CEILING SUPPLY DIFFUSER

AutoCAD SHX Text

CEILING RETURN REGISTER/

AutoCAD SHX Text

CABINET UNIT HEATER

AutoCAD SHX Text

CONDENSER WATER SUPPLY

AutoCAD SHX Text

CONDENSER WATER RETURN

AutoCAD SHX Text

DRY BULB TEMPERATURE

AutoCAD SHX Text

REPEAT/DOOR OPENING

AutoCAD SHX Text

ENTERING DRY BULB

AutoCAD SHX Text

ELECTRICAL CONTRACTOR

AutoCAD SHX Text

EQUIVALENT DIRECT RADIATION

AutoCAD SHX Text

ELEMENTARY SCHOOL

AutoCAD SHX Text

ENTERING AIR TEMPERATURE

AutoCAD SHX Text

ENTERING WET BULB

AutoCAD SHX Text

EXTERNAL STATIC PRESSURE

AutoCAD SHX Text

FIRE HOSE CABINET

AutoCAD SHX Text

DIMENSION

AutoCAD SHX Text

DIM

AutoCAD SHX Text

FIBER GLASS

AutoCAD SHX Text

FLOOR

AutoCAD SHX Text

FIXTURE

AutoCAD SHX Text

FINISH

AutoCAD SHX Text

FIXT

AutoCAD SHX Text

FL/FLR

AutoCAD SHX Text

FHC

AutoCAD SHX Text

FIN

AutoCAD SHX Text F.G.

AutoCAD SHX Text

DOWN

AutoCAD SHX Text

DEEP

AutoCAD SHX Text

DIRECT EXPANSION

AutoCAD SHX Text

DRAWING

AutoCAD SHX Text

EACH

AutoCAD SHX Text

EAST

AutoCAD SHX Text

DOOR

AutoCAD SHX Text

EXPANSION JOINT

AutoCAD SHX Text

EXISTING FIRE EXTINGUISHER

AutoCAD SHX Text

EXHAUST FAN

AutoCAD SHX Text

MOUNTING HEIGHT

AutoCAD SHX Text

ENTRANCE

AutoCAD SHX Text

ENCLOSURE

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text

ELEVATION

AutoCAD SHX Text

EQUAL

AutoCAD SHX Text

AutoCAD SHX Text D.O

AutoCAD SHX Text E

AutoCAD SHX Text

DWG

AutoCAD SHX Text

E-CONTR.

AutoCAD SHX Text

EDB

AutoCAD SHX Text

EDR

AutoCAD SHX Text

EFE

AutoCAD SHX Text E.J

AutoCAD SHX Text E.F

AutoCAD SHX Text

ENTR.

AutoCAD SHX Text

ENCL.

AutoCAD SHX Text

EL/ELEV

AutoCAD SHX Text

ELEC

AutoCAD SHX Text E.M.H.

AutoCAD SHX Text

EAT

AutoCAD SHX Text

ENTERING WATER

AutoCAD SHX Text

EVAPORATOR

AutoCAD SHX Text

AND SO FORTH

AutoCAD SHX Text

TEMPERATURE

AutoCAD SHX Text

EXHAUST AIR

AutoCAD SHX Text

EXHAUST

AutoCAD SHX Text

EXPANSION

AutoCAD SHX Text

EXISTING

AutoCAD SHX Text

EXTERIOR

AutoCAD SHX Text

FAN COIL UNIT

AutoCAD SHX Text

FIRE DAMPER

AutoCAD SHX Text

FLOOR DRAIN

AutoCAD SHX Text

FAHRENHEIT

AutoCAD SHX Text

FRESH AIR INTAKE

AutoCAD SHX Text

FIRE EXTINGUISHER

AutoCAD SHX Text

EWT

AutoCAD SHX Text

EWB

AutoCAD SHX Text

EVAP

AutoCAD SHX Text

ETC

AutoCAD SHX Text

ESP

AutoCAD SHX Text

EXH

AutoCAD SHX Text

EXIST

AutoCAD SHX Text

EXH.A

AutoCAD SHX Text

EXP

AutoCAD SHX Text

EXT

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text

FCU

AutoCAD SHX Text

F.DAMP.

AutoCAD SHX Text F.D.

AutoCAD SHX Text F.A.I.

AutoCAD SHX Text F.E.

AutoCAD SHX Text

EQUIP

AutoCAD SHX Text

EQUIPMENT

AutoCAD SHX Text

COOLING COIL

AutoCAD SHX Text

CEILING HEIGHT

AutoCAD SHX Text

GRILLE

AutoCAD SHX Text

CEILING

AutoCAD SHX Text

COOLING WATER

AutoCAD SHX Text

CENTER LINE

AutoCAD SHX Text

CONTROL JOINT

AutoCAD SHX Text

CLOSET

AutoCAD SHX Text C.C

AutoCAD SHX Text

CFM

AutoCAD SHX Text C.H

AutoCAD SHX Text

CLG

AutoCAD SHX Text

CEIL OR

AutoCAD SHX Text

CER/CEG

AutoCAD SHX Text

CHWR

AutoCAD SHX Text

CLG WTR

AutoCAD SHX Text C.J.

AutoCAD SHX Text

CMP

AutoCAD SHX Text

CLOS

AutoCAD SHX Text

CHWS

AutoCAD SHX Text

COMPRESSOR

AutoCAD SHX Text

CONDENSER

AutoCAD SHX Text

CONCRETE

AutoCAD SHX Text

COLUMN

AutoCAD SHX Text

CONTINUOUS

AutoCAD SHX Text

CONSTRUCTION

AutoCAD SHX Text

GRILLE

AutoCAD SHX Text

CONDENSATE PUMP

AutoCAD SHX Text

CONVECTOR

AutoCAD SHX Text

CONTRACTOR

AutoCAD SHX Text

COOLING TOWER

AutoCAD SHX Text

CONDENSER UNIT

AutoCAD SHX Text

CUBIC FEET

AutoCAD SHX Text

DIAMETER

AutoCAD SHX Text

DECIBEL

AutoCAD SHX Text

DUST COLLECTOR

AutoCAD SHX Text

DEGREE

AutoCAD SHX Text

CERAMIC TILE

AutoCAD SHX Text

DOUBLE HUNG

AutoCAD SHX Text

DRINKING FOUNTAIN

AutoCAD SHX Text

DEMOLITION

AutoCAD SHX Text

COL

AutoCAD SHX Text

CONC

AutoCAD SHX Text

COMPR

AutoCAD SHX Text

COND

AutoCAD SHX Text

CONT

AutoCAD SHX Text

CONST

AutoCAD SHX Text

CSD

AutoCAD SHX Text

CRU

AutoCAD SHX Text

CONV

AutoCAD SHX Text

CRR/CRG

AutoCAD SHX Text

CONTR

AutoCAD SHX Text

CU FT

AutoCAD SHX Text

CWS

AutoCAD SHX Text

CWR

AutoCAD SHX Text

CUH

AutoCAD SHX Text

C.TWR.

AutoCAD SHX Text

D/DIA

AutoCAD SHX Text dB

AutoCAD SHX Text

DEG

AutoCAD SHX Text

AutoCAD SHX Text D.H.

AutoCAD SHX Text D.F.

AutoCAD SHX Text

DEMO

AutoCAD SHX Text

AutoCAD SHX Text C.O

AutoCAD SHX Text

CLEAN OUT

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text

AND

AutoCAD SHX Text

AIR HANDLER UNIT

AutoCAD SHX Text

ADJACENT

AutoCAD SHX Text

ALTERNATE

AutoCAD SHX Text

AMBIENT

AutoCAD SHX Text

ALUMINUM

AutoCAD SHX Text

AVERAGE

AutoCAD SHX Text

APPROXIMATE

AutoCAD SHX Text

ARCHITECTURAL

AutoCAD SHX Text

AMPERE

AutoCAD SHX Text

ACCESS DOOR

AutoCAD SHX Text

BITUMINOUS

AutoCAD SHX Text

BRITISH THERMAL

AutoCAD SHX Text

BUILDING

AutoCAD SHX Text

BLOCK

AutoCAD SHX Text

UNITS/HOUR

AutoCAD SHX Text

BUILT UP ROOFING

AutoCAD SHX Text

COMMON

AutoCAD SHX Text

CATCH BASIN

AutoCAD SHX Text

BUILT UP

AutoCAD SHX Text

ACM

AutoCAD SHX Text

ACT

AutoCAD SHX Text

ACU

AutoCAD SHX Text

ACW

AutoCAD SHX Text

AFF

AutoCAD SHX Text

ADJ

AutoCAD SHX Text

AHU

AutoCAD SHX Text

AMB

AutoCAD SHX Text

ALT

AutoCAD SHX Text

ALUM

AutoCAD SHX Text

BDD

AutoCAD SHX Text

AVG

AutoCAD SHX Text

APD

AutoCAD SHX Text

APPROX

AutoCAD SHX Text

AMP

AutoCAD SHX Text

ARCH

AutoCAD SHX Text

BITUM

AutoCAD SHX Text

BTUH

AutoCAD SHX Text

BLK

AutoCAD SHX Text

BLDG

AutoCAD SHX Text

BHP

AutoCAD SHX Text C

AutoCAD SHX Text

BUR

AutoCAD SHX Text

BFW

AutoCAD SHX Text

LEADER

AutoCAD SHX Text

LDR

AutoCAD SHX Text

OPPOSITE

AutoCAD SHX Text

OPP

AutoCAD SHX Text

OUNCE

AutoCAD SHX Text

LIQUID

AutoCAD SHX Text

LINEAR FEET

AutoCAD SHX Text

LIVE LOAD

AutoCAD SHX Text

LOW POINT

AutoCAD SHX Text

LOW PRESSURE STEAM

AutoCAD SHX Text

LINEAR RETURN GRILLE

AutoCAD SHX Text

LINEAR SUPPLY DIFFUSER

AutoCAD SHX Text

LEAVING WATER TEMPERATURE

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text

MAXIMUM

AutoCAD SHX Text

MIRROR

AutoCAD SHX Text

MECHANICAL

AutoCAD SHX Text

MOTORIZED DAMPER

AutoCAD SHX Text

BTU PER HOUR (THOUSAND)

AutoCAD SHX Text

MINIMUM

AutoCAD SHX Text

MASONRY OPENING

AutoCAD SHX Text

MARBLE SADDLE

AutoCAD SHX Text

MISCELLANEOUS

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

MEDIUM PRESSURE STEAM

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

METAL

AutoCAD SHX Text

MAN HOLE

AutoCAD SHX Text

MOUNTED

AutoCAD SHX Text

NORMALLY CLOSED

AutoCAD SHX Text

NOT IN CONTRACT

AutoCAD SHX Text

NUMBER(S)

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NORMALLY OPEN

AutoCAD SHX Text

NOT APPLICABLE

AutoCAD SHX Text

OUTSIDE FACE

AutoCAD SHX Text

OVERHEAD

AutoCAD SHX Text

OUTSIDE AIR

AutoCAD SHX Text

ON CENTER

AutoCAD SHX Text

OUTSIDE DIAMETER

AutoCAD SHX Text

OPEN DUCT RETURN

AutoCAD SHX Text

OPENING

AutoCAD SHX Text

LIQ

AutoCAD SHX Text

LPS

AutoCAD SHX Text

LWT

AutoCAD SHX Text

LRG

AutoCAD SHX Text

LSD

AutoCAD SHX Text

AutoCAD SHX Text M

AutoCAD SHX Text

MAX

AutoCAD SHX Text

MBH

AutoCAD SHX Text

MAT

AutoCAD SHX Text

MECH

AutoCAD SHX Text

MPS

AutoCAD SHX Text

MISC

AutoCAD SHX Text

MIN

AutoCAD SHX Text

MFR

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text

MTD

AutoCAD SHX Text

MTL

AutoCAD SHX Text

AutoCAD SHX Text N.I.C

AutoCAD SHX Text

N.OPEN

AutoCAD SHX Text

NO (S)

AutoCAD SHX Text N.T.S

AutoCAD SHX Text N/A

AutoCAD SHX Text

ODR

AutoCAD SHX Text

OPNG

AutoCAD SHX Text

VOLT

AutoCAD SHX Text

WITH

AutoCAD SHX Text

UNFIN

AutoCAD SHX Text

VAV

AutoCAD SHX Text V

AutoCAD SHX Text V.C.T

AutoCAD SHX Text

VOL

AutoCAD SHX Text

VLV

AutoCAD SHX Text

VEST

AutoCAD SHX Text V.I.F

AutoCAD SHX Text V.P.

AutoCAD SHX Text V.W.C.

AutoCAD SHX Text W

AutoCAD SHX Text

AutoCAD SHX Text W.C.

AutoCAD SHX Text W/

AutoCAD SHX Text

VEL

AutoCAD SHX Text

'WG'

AutoCAD SHX Text W.G.

AutoCAD SHX Text

WER/WEG

AutoCAD SHX Text W.I.

AutoCAD SHX Text W.P.

AutoCAD SHX Text

WPD

AutoCAD SHX Text

WRR/WRG

AutoCAD SHX Text W.R.

AutoCAD SHX Text

WTG

AutoCAD SHX Text

WTR

AutoCAD SHX Text W.W.M.

AutoCAD SHX Text W.W.F.

AutoCAD SHX Text

WSR/WSG

AutoCAD SHX Text

WEF

AutoCAD SHX Text

HEATING/COOLING

AutoCAD SHX Text H/C

AutoCAD SHX Text

HORIZONTAL

AutoCAD SHX Text

HIGH POINT

AutoCAD SHX Text

HEATING COIL

AutoCAD SHX Text

HOLLOW METAL

AutoCAD SHX Text

HIGH PRESSURE STEAM

AutoCAD SHX Text

REFRIGERANT HOT GAS

AutoCAD SHX Text

HEATER

AutoCAD SHX Text

HEAT

AutoCAD SHX Text

HOUR (S)

AutoCAD SHX Text

HEATING/VENTILATION UNIT

AutoCAD SHX Text

HIGH TEMPERATURE HOT WATER

AutoCAD SHX Text

HIGH IMPACT WALL COVERING

AutoCAD SHX Text

HORSE POWER

AutoCAD SHX Text

HEAD

AutoCAD SHX Text

HEAT EXCHANGER

AutoCAD SHX Text

INSIDE DIAMETER

AutoCAD SHX Text

HOT WATER SUPPLY

AutoCAD SHX Text

FREQUENCY(CYCLES PER MINUTE)

AutoCAD SHX Text

INCH

AutoCAD SHX Text

INTERIOR

AutoCAD SHX Text

INVERT

AutoCAD SHX Text

INSULATION

AutoCAD SHX Text

IN-LINE EXHAUST FAN

AutoCAD SHX Text

JOINT

AutoCAD SHX Text

KITCHEN

AutoCAD SHX Text

KILOWATT

AutoCAD SHX Text

JUNCTION BOX

AutoCAD SHX Text

LAMINATE

AutoCAD SHX Text

LENGTH

AutoCAD SHX Text

MOUNTING HEIGHT

AutoCAD SHX Text

LEAVING AIR TEMPERATURE

AutoCAD SHX Text

KINDERGARTEN

AutoCAD SHX Text

JANITOR'S CLOSET

AutoCAD SHX Text

POUNDS

AutoCAD SHX Text

LEAD COATED COPPER

AutoCAD SHX Text

LAVATORY

AutoCAD SHX Text

HOT WATER RETURN

AutoCAD SHX Text

HORIZ

AutoCAD SHX Text

HPS

AutoCAD SHX Text H.P

AutoCAD SHX Text

AutoCAD SHX Text H.M

AutoCAD SHX Text

AutoCAD SHX Text H.W.C.

AutoCAD SHX Text

HTR

AutoCAD SHX Text

HTHW

AutoCAD SHX Text

H.PWR

AutoCAD SHX Text

HEAT.CL.

AutoCAD SHX Text

HWS

AutoCAD SHX Text

INSUL

AutoCAD SHX Text

INT

AutoCAD SHX Text

INV

AutoCAD SHX Text

IEF

AutoCAD SHX Text

KIT

AutoCAD SHX Text J.B

AutoCAD SHX Text

LAT

AutoCAD SHX Text

LAM

AutoCAD SHX Text L

AutoCAD SHX Text K.M.H.

AutoCAD SHX Text J.C

AutoCAD SHX Text

LBS/#

AutoCAD SHX Text L.C.C

AutoCAD SHX Text

LAV

AutoCAD SHX Text

HWR

AutoCAD SHX Text

FOOTING

AutoCAD SHX Text

FUEL OIL SUPPLY

AutoCAD SHX Text

FUEL OIL RETURN

AutoCAD SHX Text

FUEL OIL GAUGE

AutoCAD SHX Text

FLAT ON BOTTOM

AutoCAD SHX Text

FLAT ON TOP

AutoCAD SHX Text

FEET PER MINUTE

AutoCAD SHX Text

FOOT OR FEET

AutoCAD SHX Text

POLYSTYRENE

AutoCAD SHX Text

FEET PER SECOND

AutoCAD SHX Text

FIBERGLASS REINFORCED

AutoCAD SHX Text

GENERAL

AutoCAD SHX Text

GLASS

AutoCAD SHX Text

GALLONS

AutoCAD SHX Text

GALVANIZED

AutoCAD SHX Text

GENERAL CONSTRUCTION

AutoCAD SHX Text

GALLONS PER HOUR

AutoCAD SHX Text

GAUGE

AutoCAD SHX Text

FIRE PROOF

AutoCAD SHX Text

GRAINS

AutoCAD SHX Text

GYPSUM BOARD

AutoCAD SHX Text

GAS VALVE

AutoCAD SHX Text

GALLONS PER MINUTE

AutoCAD SHX Text

GYPSUM FIBERBOARD

AutoCAD SHX Text

HEIGHT

AutoCAD SHX Text

HOSE BIB

AutoCAD SHX Text

HOLLOW CORE

AutoCAD SHX Text

CONDITIONING CONTRACTOR

AutoCAD SHX Text

HEATING, VENTING, AND AIR

AutoCAD SHX Text

FTG

AutoCAD SHX Text

FOG

AutoCAD SHX Text

FOS

AutoCAD SHX Text

FOR

AutoCAD SHX Text

FOB

AutoCAD SHX Text

FOT

AutoCAD SHX Text

FPS

AutoCAD SHX Text

FPM

AutoCAD SHX Text

FRP

AutoCAD SHX Text

GEN

AutoCAD SHX Text

GAL

AutoCAD SHX Text

GALV

AutoCAD SHX Text G.C

AutoCAD SHX Text

GPH

AutoCAD SHX Text

AutoCAD SHX Text F.P.

AutoCAD SHX Text

AutoCAD SHX Text G.V.

AutoCAD SHX Text

GPM

AutoCAD SHX Text H

AutoCAD SHX Text H.B.

AutoCAD SHX Text H.C

AutoCAD SHX Text

GYP. FB

AutoCAD SHX Text

GYP. BD

AutoCAD SHX Text

H-CONTR

AutoCAD SHX Text

RPM

AutoCAD SHX Text

SINK

AutoCAD SHX Text

SAN

AutoCAD SHX Text

SCHED

AutoCAD SHX Text S

AutoCAD SHX Text

SHT

AutoCAD SHX Text

SIM

AutoCAD SHX Text

SECT

AutoCAD SHX Text

S.DMPR

AutoCAD SHX Text

RTU

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text

STD

AutoCAD SHX Text

SQ FT

AutoCAD SHX Text

STM

AutoCAD SHX Text

STL

AutoCAD SHX Text

SUCT

AutoCAD SHX Text

STRUCT

AutoCAD SHX Text

SUSP

AutoCAD SHX Text

STOR

AutoCAD SHX Text

TEL

AutoCAD SHX Text T.D.

AutoCAD SHX Text

T.DIFF.

AutoCAD SHX Text

TEMP

AutoCAD SHX Text

TEMPR.

AutoCAD SHX Text

THK

AutoCAD SHX Text T.O.

AutoCAD SHX Text T.O.P.

AutoCAD SHX Text T.O.C.

AutoCAD SHX Text T.O.S.

AutoCAD SHX Text

TYP

AutoCAD SHX Text

T'STAT

AutoCAD SHX Text

TSP

AutoCAD SHX Text

TCP

AutoCAD SHX Text

AutoCAD SHX Text U

AutoCAD SHX Text

SPEC(S)

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text

PART

AutoCAD SHX Text

P-CONTR

AutoCAD SHX Text

PLT

AutoCAD SHX Text

PLUMB

AutoCAD SHX Text

PNT

AutoCAD SHX Text

PNL

AutoCAD SHX Text

PLYWOOD

AutoCAD SHX Text

PRESS

AutoCAD SHX Text

PSI

AutoCAD SHX Text

PREFAB

AutoCAD SHX Text

AutoCAD SHX Text R

AutoCAD SHX Text

RAD

AutoCAD SHX Text

REF

AutoCAD SHX Text

REINF

AutoCAD SHX Text

REQ'D

AutoCAD SHX Text

QTY

AutoCAD SHX Text

EMERGENCY EGRESS WINDOW

AutoCAD SHX Text E.E.W.

AutoCAD SHX Text

PRSC

AutoCAD SHX Text

PROJECTION SCREEN

AutoCAD SHX Text

EXHAUST HOOD

AutoCAD SHX Text E.H.

AutoCAD SHX Text

AutoCAD SHX Text A.R.

AutoCAD SHX Text

AREA OF REFUGE

AutoCAD SHX Text

PANEL

AutoCAD SHX Text

EXISTING CUSPIDOR

AutoCAD SHX Text

E-CUSP.

AutoCAD SHX Text

EXISTING DRINKING FOUNTAIN

AutoCAD SHX Text E.D.F

AutoCAD SHX Text

AutoCAD SHX Text GENERAL: T1 TITLE SHEET TITLE SHEET G1 LOCATION MAP, ABBREVIATIONS, LEGENDS, GENERAL NOTES & LIST OF DRAWINGS. LOCATION MAP, ABBREVIATIONS, LEGENDS, GENERAL NOTES & LIST OF DRAWINGS. ARCHITECTURAL: A10 SECOND FLOOR PLAN - FOR REFERENCE ONLY SECOND FLOOR PLAN - FOR REFERENCE ONLY AR100 BASE BID - MEDIA CENTER & BASE BID - MEDIA CENTER & ALTERNATE #1 - CORRIDOR - REMOVALS - PARTIAL SECOND FLOOR REFLECTED CEILING PLANS A100 BASE BID - MEDIA CENTER & BASE BID - MEDIA CENTER & ALTERNATE #1 - CORRIDOR - PARTIAL SECOND FLOOR REFLECTED CEILING PLANS A650 DETAILS DETAILS S100 ROOF FRAMING PLAN - FOR REFERENCE ONLY ROOF FRAMING PLAN - FOR REFERENCE ONLY

AutoCAD SHX Text

POWER CHARGING CABINET

AutoCAD SHX Text

PCC

AutoCAD SHX Text x

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

FLUSH

AutoCAD SHX Text

ROOM NAME & NUMBER

AutoCAD SHX Text

DOOR NUMBER

AutoCAD SHX Text

ELEVATION KEY

AutoCAD SHX Text

WINDOW TYPE

AutoCAD SHX Text

REMOVAL/WORKSCOPE NOTE

AutoCAD SHX Text

DETAIL KEY

AutoCAD SHX Text

DWG. NO.

AutoCAD SHX Text

DETAIL NO.

AutoCAD SHX Text

WALL TYPE

AutoCAD SHX Text

EXTERIOR ELEVATION KEY

AutoCAD SHX Text

CENTERLINE OR N.I.C. LINE

AutoCAD SHX Text

FLUSH THRESHOLD

AutoCAD SHX Text

5'-0" HANDICAPPED TURNING RADIUS

AutoCAD SHX Text

REMOVE EXISTING CONSTRUCTION

AutoCAD SHX Text

EXISTING CONSTRUCTION

AutoCAD SHX Text

NEW WALL CONSTRUCTION

AutoCAD SHX Text

REVISION MARK

AutoCAD SHX Text

COLUMN GRID LINES

AutoCAD SHX Text

EXISTING COLUMN DESIGNATION

AutoCAD SHX Text

BUILDING/WALL SECTION/DETAIL

AutoCAD SHX Text

REFERENCE POINT

AutoCAD SHX Text

HIDDEN LINE BELOW

AutoCAD SHX Text

HIDDEN LINE ABOVE OR BEYOND

AutoCAD SHX Text

EXISTING DOOR INDICATES DOOR NUMBER (SEE DOOR SCHEDULE)

AutoCAD SHX Text

NEW DOOR INDICATES DOOR NUMBER (SEE DOOR SCHEDULE)

AutoCAD SHX Text A-

AutoCAD SHX Text

AutoCAD SHX Text A-

AutoCAD SHX Text

AutoCAD SHX Text %%uCLASSROOM

AutoCAD SHX Text

AutoCAD SHX Text J1

AutoCAD SHX Text W

AutoCAD SHX Text

LAVATORY CLEARANCES

AutoCAD SHX Text

27" MIN.

AutoCAD SHX Text

29" MIN.

AutoCAD SHX Text

34" MAX.

AutoCAD SHX Text

40" MAX.

AutoCAD SHX Text 40"

AutoCAD SHX Text 6'-8"

AutoCAD SHX Text 48"

AutoCAD SHX Text 18"

AutoCAD SHX Text

TYP.

AutoCAD SHX Text 5'-4"

AutoCAD SHX Text 6'-8"

AutoCAD SHX Text

KNEE CLEARANCE

AutoCAD SHX Text

48" MAX.

AutoCAD SHX Text 27"

AutoCAD SHX Text

MIN.

AutoCAD SHX Text

33" MAX.

AutoCAD SHX Text

60" MAX.

AutoCAD SHX Text

36" MAX.

AutoCAD SHX Text

FINISH FACE OF THE WALL

AutoCAD SHX Text

SWING-UP GRAB BAR

AutoCAD SHX Text

STUD

AutoCAD SHX Text

ADEQUATE BACKING

AutoCAD SHX Text

FINISH FACE OF FLOOR

AutoCAD SHX Text

GRAB BAR BACKPLATE

AutoCAD SHX Text

AutoCAD SHX Text 61"

AutoCAD SHX Text 29"

AutoCAD SHX Text

48" MIN.

AutoCAD SHX Text 18"

AutoCAD SHX Text

MIN.

AutoCAD SHX Text 36"

AutoCAD SHX Text

MIN.

AutoCAD SHX Text

60" MIN.

AutoCAD SHX Text

COORDINATE WITH E-DRAWINGS

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 17"

AutoCAD SHX Text 54"

AutoCAD SHX Text 38"

AutoCAD SHX Text 34"

AutoCAD SHX Text 36"

AutoCAD SHX Text

MIN.

AutoCAD SHX Text 39"

AutoCAD SHX Text 19"

AutoCAD SHX Text

36" MAX.

AutoCAD SHX Text 12"

AutoCAD SHX Text 33"

AutoCAD SHX Text

48" MAX.

AutoCAD SHX Text

HAND DRYER

AutoCAD SHX Text

WALL LAVATORY

AutoCAD SHX Text

MIRROR

AutoCAD SHX Text

SOAP DISPENSER

AutoCAD SHX Text

48" MAX.

AutoCAD SHX Text

GRAB BAR REAR WALL

AutoCAD SHX Text 33"

AutoCAD SHX Text

GRAB BAR SIDE WALL

AutoCAD SHX Text 36"

AutoCAD SHX Text

COUNTER TOP LAVATORY

AutoCAD SHX Text 34"

AutoCAD SHX Text

TOILET SEAT COVER DISPENSER

AutoCAD SHX Text

TOILET PAPER DISPENSER

AutoCAD SHX Text 36"

AutoCAD SHX Text 42"

AutoCAD SHX Text

MIN.

AutoCAD SHX Text

SANITARY NAPKIN DISPOSAL

AutoCAD SHX Text

SHOWER REAR WALL

AutoCAD SHX Text

SHOWER CONTROL WALL

AutoCAD SHX Text

TOWEL HOOK

AutoCAD SHX Text 18"

AutoCAD SHX Text 33"-36"

AutoCAD SHX Text 18"

AutoCAD SHX Text

38" MAX.

AutoCAD SHX Text 18"

AutoCAD SHX Text

48" MAX.

AutoCAD SHX Text

CONTROL AREA

AutoCAD SHX Text

TWO-WALL GRAB BAR

AutoCAD SHX Text

FOLDING SEAT

AutoCAD SHX Text

SANITARY NAPKIN/ TAMPON VENDOR

AutoCAD SHX Text

H.C. URINAL

AutoCAD SHX Text 27"

AutoCAD SHX Text

44" MAX.

AutoCAD SHX Text

FLUSH CONTROL

AutoCAD SHX Text

PAPER TOWEL DISPENSER

AutoCAD SHX Text

48" MAX.

AutoCAD SHX Text 19"

AutoCAD SHX Text

NON-H.C. URINAL

AutoCAD SHX Text

MANEUVERING CLEARANCES: FRONT APPROACH SWINGING DOORS

AutoCAD SHX Text

PUSH SIDE

AutoCAD SHX Text

PULL SIDE

AutoCAD SHX Text

COAT HOOK

AutoCAD SHX Text

DRINKING FOUNTAIN

AutoCAD SHX Text

PROTRUDING OBJECTS

AutoCAD SHX Text

ELEC. OUTLETS

AutoCAD SHX Text

FIRE EXTINGUISHER

AutoCAD SHX Text

PROJ. BELL

AutoCAD SHX Text

SPEAKER

AutoCAD SHX Text

FIRE ALARM BOX

AutoCAD SHX Text

THERMOSTAT

AutoCAD SHX Text

CLOCK

AutoCAD SHX Text 34"

AutoCAD SHX Text 42"

AutoCAD SHX Text

48" MAX.

AutoCAD SHX Text

CALL BUTTON

AutoCAD SHX Text

TELEPHONE

AutoCAD SHX Text

CORRIDOR HANDRAIL

AutoCAD SHX Text

LIGHT SWITCH

AutoCAD SHX Text

FIRE HORN

AutoCAD SHX Text 40"

AutoCAD SHX Text

@ COUNTERS

AutoCAD SHX Text

48" MAX.

AutoCAD SHX Text 60"

AutoCAD SHX Text

UTILITY SHELF W/ MOP HOLDER

AutoCAD SHX Text 72"

AutoCAD SHX Text

CLOSET SHELF & ROD

AutoCAD SHX Text 33"

AutoCAD SHX Text

12" MAXIMUM THRESHOLD @ SHOWER BASE.

AutoCAD SHX Text

CONCRETE

AutoCAD SHX Text

CONCRETE MASONRY UNITS

AutoCAD SHX Text

BRICK

AutoCAD SHX Text

STONE

AutoCAD SHX Text

METALS

AutoCAD SHX Text

COMPACTED GRAVEL

AutoCAD SHX Text

EARTH/UNDISTURBED SOIL

AutoCAD SHX Text

PARTICLE BOARD

AutoCAD SHX Text

PLYWOOD

AutoCAD SHX Text

ACOUSTICAL TILE

AutoCAD SHX Text

CONTINUOUS WOOD FRAMING THROUGH MEMBER

AutoCAD SHX Text

FINISHED WOOD

AutoCAD SHX Text

BATT INSULATION

AutoCAD SHX Text

WOOD FRAMING THROUGH INTERRUPTED MEMBER

AutoCAD SHX Text

RIGID INSULATION

AutoCAD SHX Text

DRAINAGE BOARD

AutoCAD SHX Text

INTERIOR WALL INDICATIONS

AutoCAD SHX Text

AutoCAD SHX Text 39"

AutoCAD SHX Text 18"

AutoCAD SHX Text

MIN.

AutoCAD SHX Text 12"

AutoCAD SHX Text 24"

AutoCAD SHX Text 54"

AutoCAD SHX Text

MIN.

AutoCAD SHX Text

VERTICAL GRAB BAR

AutoCAD SHX Text 39"

AutoCAD SHX Text

1. REMOVAL DRAWINGS INDICATE ONLY MAJOR SCOPE OF REMOVALS. REMOVAL DRAWINGS INDICATE ONLY MAJOR SCOPE OF REMOVALS. CONTRACTOR IS REQUIRED TO REMOVE ANY AND ALL ITEMS NOT SHOWN AS REQUIRED TO SUIT ALL NEW WORK. CONTRACTOR IS REQUIRED TO REMOVE, PROTECT AND STORE ANY AND ALL ITEMS SHOWN AS REQUIRED TO SUIT ALL NEW WORK, COORDINATE W/ OWNER FOR STORING LOCATIONS. 2. CONTRACTOR IS TO VERIFY ANY MAJOR DIMENSIONAL DEVIATIONS FROM CONTRACTOR IS TO VERIFY ANY MAJOR DIMENSIONAL DEVIATIONS FROM DRAWINGS OR STRUCTURAL OBSTRUCTIONS. THESE SHALL BE BROUGHT TO THE OWNER'S REPRESENTATIVE'S ATTENTION. ALL CONTRACT DRAWINGS INDICATE APPROXIMATE DIMENSIONS AND EXISTING CONDITIONS BASED ON FIELD SURVEY AND DRAWINGS FURNISHED BY THE OWNER. VARIATIONS MAY EXIST AS TO FIELD CONDITIONS. THE COST FOR ANY SUCH VARIATIONS SHALL BE INCLUDED WITHIN THE CONTRACT BID. 3. ALL SURFACES DISTURBED BY REMOVALS SHALL BE PATCHED/REPAIRED TO ALL SURFACES DISTURBED BY REMOVALS SHALL BE PATCHED/REPAIRED TO MATCH EXISTING ADJACENT FINISHES, COORDINATE AND PREPARE SURFACES TO ACCOMMODATE WITH NEW FINISH ACCORDING TO SPECS AND MANUFACTURER'S RECOMMENDATIONS. 4. CONTRACTOR SHALL FIRE STOP ALL TRADE RELATED EXISTING OR NEW CONTRACTOR SHALL FIRE STOP ALL TRADE RELATED EXISTING OR NEW PENETRATIONS THROUGH PARTITIONS AND WALLS AT ALL LOCATIONS WITH APPROVED MATERIALS AND SYSTEMS. 5. ALWAYS WORK IN A MANNER WHICH PROVIDES CONTINUOUS SUPPORT TO ALWAYS WORK IN A MANNER WHICH PROVIDES CONTINUOUS SUPPORT TO STRUCTURE ABOVE. PROVIDE APPROPRIATE LINTEL FOR ALL OPENINGS UNLESS SPECIFIED OTHERWISE. 6. SALVAGE ALL WINDOW TREATMENTS AND HARDWARE. LABEL/LOCATION AND SALVAGE ALL WINDOW TREATMENTS AND HARDWARE. LABEL/LOCATION AND STORE ON-SITE AS DIRECTED BY OWNER. 7. COORDINATE REMOVALS WITH NEW WORK.COORDINATE REMOVALS WITH NEW WORK.

AutoCAD SHX Text

18. WHERE MANUFACTURER'S NAMES AND PRODUCT NUMBERS ARE INDICATED ON WHERE MANUFACTURER'S NAMES AND PRODUCT NUMBERS ARE INDICATED ON DRAWINGS, IT SHALL BE CONSTRUCTED TO MEAN THE ESTABLISHMENT OF QUALITY AND PERFORMANCE STANDARDS OF SUCH ITEMS. ALL OTHER PRODUCTS MUST BE SUBMITTED TO THE ARCHITECT FOR APPROVAL IN ACCORDANCE TO CONTRACT DOCUMENT REQUIREMENT BEFORE THEY SHALL BE DEEMED EQUAL. 19. FIRESTOPPING SHALL BE INSTALLED AT ALL PENETRATIONS OF FIRE RATED FIRESTOPPING SHALL BE INSTALLED AT ALL PENETRATIONS OF FIRE RATED CONSTRUCTION AS PER SPECIFICATIONS. 20. PROVIDE GUARDS, RAILS, BARRICADES, FENCES, SIDEWALK SHEDS, CATCH PROVIDE GUARDS, RAILS, BARRICADES, FENCES, SIDEWALK SHEDS, CATCH PLATFORMS, DECKING, NIGHT LIGHTING, ETC., AS REQUIRED. TO PROVIDE ADEQUATE PROTECTION. 21. THE CONTRACTOR SHALL, UNLESS OTHERWISE PROVIDED IN THE CONTRACT THE CONTRACTOR SHALL, UNLESS OTHERWISE PROVIDED IN THE CONTRACT DOCUMENTS, SECURE AND PAY FOR REQUIRED INSPECTIONS, PERMIT(S), FEES, LICENSE AND INSPECTIONS NECESSARY FOR THE PROPER EXECUTION OF THE WORK. 22. ADDITIONAL NOTES WHICH ARE APPLICABLE TO THIS PROJECT MAY BE FOUND ADDITIONAL NOTES WHICH ARE APPLICABLE TO THIS PROJECT MAY BE FOUND THROUGHOUT THE CONTRACT DOCUMENTS. 23. SEISMIC RESTRAINTS SHALL BE PROVIDED, IN ACCORDANCE TO APPLICABLE SEISMIC RESTRAINTS SHALL BE PROVIDED, IN ACCORDANCE TO APPLICABLE CODES. 24. FOR ALL ITEMS THAT ARE REQUIRED TO HAVE SEISMIC SUPPORTS OR FOR ALL ITEMS THAT ARE REQUIRED TO HAVE SEISMIC SUPPORTS OR RESTRAINTS, SEISMIC PLANS AND SEISMIC RESTRAINT CALCULATIONS SHALL BE PREPARED, SEALED AND SIGNED BY A PROFESSIONAL ENGINEER LICENSED IN THE STATE OF CONNECTICUT ENGAGED BY THE CONTRACTOR. THE ENGINEER SHALL PROVIDE INSTALLATION SUPERVISION OF ALL SEISMIC SUPPORTS AND RESTRAINTS, UNLESS OTHERWISE NOTED. 25. REVIEW AND COORDINATE ALL CONDITIONS (INCLUDING BUT NOT LIMITED TO REVIEW AND COORDINATE ALL CONDITIONS (INCLUDING BUT NOT LIMITED TO PENETRATIONS, FABRICATIONS, INSTALLATIONS) FOR CONFORMANCE TO THE PLANS, SPECIFICATIONS, APPLICABLE REFERENCE STANDARDS AND OTHER PROVISIONS OF THE CONTRACT DOCUMENTS, AND COORDINATE ALL WORK WITH ALL OTHER TRADES. 26. ALL WORK MUST CONFORM TO ALL CODES HAVING JURISDICTION ANY CONFLICT ALL WORK MUST CONFORM TO ALL CODES HAVING JURISDICTION ANY CONFLICT OF OR BETWEEN CODE, THE MORE STRINGENT CODE SHALL SUPERSEDE ALL OTHERS. 27. USE ONLY NEW MATERIALS AND EQUIPMENT, WITHOUT DEFECTS FOR THEIR USE ONLY NEW MATERIALS AND EQUIPMENT, WITHOUT DEFECTS FOR THEIR INTENDED USE. 28. CONTRACTORS SHALL PROTECT ALL AREAS OF EXISTING CONSTRUCTION AND CONTRACTORS SHALL PROTECT ALL AREAS OF EXISTING CONSTRUCTION AND RELATED ITEMS FROM DAMAGE DURING CONSTRUCTION OPERATIONS. 29. ALL OCCUPIED PORTION OF THE SCHOOL BUILDING SHALL ALWAYS COMPLY ALL OCCUPIED PORTION OF THE SCHOOL BUILDING SHALL ALWAYS COMPLY WITH THE MINIMUM REQUIREMENTS NECESSARY TO MAINTAIN A CERTIFICATE OF OCCUPANCY. 30. ALL MEASUREMENTS AND CONDITIONS TO BE VERIFIED AT THE BUILDING BY THE ALL MEASUREMENTS AND CONDITIONS TO BE VERIFIED AT THE BUILDING BY THE CONTRACTOR. THE CONTRACTOR SHALL BE RESPONSIBLE THEREFORE. 31. ALL CONTRACTORS SHALL MEET THE FOLLOWING MINIMUM SAFETY AND SECURITY ALL CONTRACTORS SHALL MEET THE FOLLOWING MINIMUM SAFETY AND SECURITY STANDARDS FOR CONSTRUCTION PROJECTS. a) ALL CONSTRUCTION MATERIALS SHALL BE STORED IN A SAFE AND SECURE MANNER. b) FENCES AROUND CONSTRUCTION SUPPLIES AND DEBRIS SHALL BE MAINTAINED. c) WORKERS SHALL BE REQUIRED TO WEAR PHOTO IDENTIFICATION BADGES AT ALL TIMES FOR IDENTIFICATION AND SECURITY PURPOSES WHILE WORKING ON SITE. 32. a) REMOVAL OF ALL DEBRIS SHALL BE THROUGH DESIGNATED, SEPARATED AND a) REMOVAL OF ALL DEBRIS SHALL BE THROUGH DESIGNATED, SEPARATED AND PROTECTED AREAS OF THE BUILDING. THERE SHALL BE NO MOVEMENT OF DEBRIS OR EQUIPMENT THROUGH OCCUPIED SPACES OF THE BUILDING. b) ALL OCCUPIED PARTS OF A BUILDING AFFECTED BY CONSTRUCTION ACTIVITY SHALL BE CLEANED AT THE CLOSE OF EACH WORK DAY. 33. CONTRACTOR SHALL MAKE THE BUILDING SECURE AT THE END OF EACH WORK CONTRACTOR SHALL MAKE THE BUILDING SECURE AT THE END OF EACH WORK DAY. PROVIDE TEMPORARY PLYWOOD COVERS OVER WINDOW/ DOOR OPENINGS AS REQUIRED TO SECURE BUILDING TO THE OWNERS SATISFACTION.

AutoCAD SHX Text THE FOLLOWING NOTES SHALL APPLY THROUGHOUT. EXCEPTIONS ARE SPECIFICALLY NOTED ON EACH DRAWING: 1. ALL DETAILS AND/OR PART OF DETAILS ARE SIMILAR FOR SIMILAR LOCATIONS IN ALL DETAILS AND/OR PART OF DETAILS ARE SIMILAR FOR SIMILAR LOCATIONS IN ALL OR PART OF THE DETAIL. 2. COORDINATION OF ALL WORK UNDER THIS CONTRACT SHALL BE MAINTAINED TO COORDINATION OF ALL WORK UNDER THIS CONTRACT SHALL BE MAINTAINED TO ENSURE THE QUALITY AND TIMELY COMPLETION OF THE WORK/PROJECT. 3. INDICATED DIMENSIONS ARE TO: INDICATED DIMENSIONS ARE TO: A. FACE OF MASONRY OR CONCRETE AND FACE OF FINISH TO FINISH ARE EXACT. B. CENTER LINES. 4. DRAWINGS ARE NOT TO BE SCALED. USE DIMENSIONS ONLY. ALL DIMENSIONS DRAWINGS ARE NOT TO BE SCALED. USE DIMENSIONS ONLY. ALL DIMENSIONS AND CONDITIONS SHOWN AND ASSUMED ON THE DRAWINGS MUST BE VERIFIED AT THE SITE BY THE CONTRACTOR BEFORE ORDERING ANY MATERIAL OR DOING ANY WORK. ANY DISCREPANCIES IN THE DRAWINGS AND SPECIFICATIONS SHALL BE REPORTED TO THE AUTHORITY. NO CHANGE IN DRAWINGS OR SPECIFICATIONS IS PERMISSIBLE WITHOUT THE WRITTEN CONSENT OF THE ARCHITECT AND ENGINEER. NO WORK SHALL PROCEED UNTIL SUCH DISCREPANCY HAS BEEN RECTIFIED. 5. ANY VARIATION FROM CONDITIONS SHOWN ON THESE DRAWINGS SHALL BE ANY VARIATION FROM CONDITIONS SHOWN ON THESE DRAWINGS SHALL BE BROUGHT TO THE ATTENTION OF THE OWNER'S REPRESENTATIVE. AFFECTED WORK SHALL NOT PROCEED UNTIL CLARIFICATION HAS BEEN RECEIVED. 6. ALL WORK OF THIS CONTRACT SHALL BE DONE IN ACCORDANCE WITH THE ALL WORK OF THIS CONTRACT SHALL BE DONE IN ACCORDANCE WITH THE LATEST EDITION OF THE BUILDING CODE CONNECTICUT AND REGULATIONS OF OTHER AGENCIES HAVING JURISDICTION ON THE WORK OF THIS CONTRACT. 7. ALL WORK ON THESE DRAWINGS SHALL BE CONSIDERED NEW WORK WHETHER ALL WORK ON THESE DRAWINGS SHALL BE CONSIDERED NEW WORK WHETHER STATED OR NOT EXCEPT WHERE SPECIFICALLY NOTED AS "EXISTING TO REMAIN". 8. DISCREPANCIES AND OMISSIONS ON DRAWINGS AND SPECIFICATIONS SHALL BE DISCREPANCIES AND OMISSIONS ON DRAWINGS AND SPECIFICATIONS SHALL BE REPORTED TO THE OWNER'S REPRESENTATIVE IN WRITING FOR CLARIFICATION. 9. SET ALL WORK STRAIGHT, PLUMB AND LEVEL OR WITH INDICATED SLOPE. SET ALL WORK STRAIGHT, PLUMB AND LEVEL OR WITH INDICATED SLOPE. 10. THE CONTRACTOR SHALL USE THE APPROVED STANDARDS: A.I.S.C. FEDERAL, THE CONTRACTOR SHALL USE THE APPROVED STANDARDS: A.I.S.C. FEDERAL, U.S., ETC. STANDARDS OF THEIR TRADES. ALL CONSTRUCTION SHALL BE PERFORMED TO THESE STANDARDS. 11. IF AMBIGUITIES EXIST IN THE CONTRACT DOCUMENTS, THE CONTRACTOR SHALL IF AMBIGUITIES EXIST IN THE CONTRACT DOCUMENTS, THE CONTRACTOR SHALL INCLUDE IN HIS BID THE MORE EXPENSIVE MATERIAL OR METHOD OF WORK. 12. THE CONTRACTOR SHALL REMOVE AND DISPOSE OF DEBRIS. THE CONTRACTOR THE CONTRACTOR SHALL REMOVE AND DISPOSE OF DEBRIS. THE CONTRACTOR SHALL KEEP WORK SITE FREE FROM DEBRIS AND ACCUMULATED REFUSE, AND SHALL HAVE SOLE RESPONSIBILITY FOR PROTECTING ALL DANGEROUS AREAS FROM ENTRY BY UNAUTHORIZED PARTIES. SITE SHALL BE LEFT BROOM CLEAN AT THE END OF EACH WORKING DAY. 13. LARGE SCALE DETAILS HAVE PRECEDENCE, HOWEVER WORK INDICATED ON LARGE SCALE DETAILS HAVE PRECEDENCE, HOWEVER WORK INDICATED ON SMALL SCALE DRAWINGS SHALL NOT BE OMITTED. SIMILARLY, NOTES TAKE PRECEDENCE OVER SCHEDULES, PIPING AND WIRE DIAGRAMS. HOWEVER, WORK SHOWN OR DESCRIBED BY OTHER METHODS SHALL NOT BE OMITTED. 14. THE CONTRACTOR SHALL PATCH AND REPAIR ALL DAMAGED OR EXPOSED THE CONTRACTOR SHALL PATCH AND REPAIR ALL DAMAGED OR EXPOSED SURFACES DUE TO CONTRACT WORK. ALL NEWLY INSTALLED, PATCHED WORK AND ALL AFFECTED AREAS SHALL BE PAINTED. ALL PAINTING WORK SHALL BE PERFORMED TO COVER THE ENTIRE HORIZONTAL OR VERTICAL SURFACE TO THE CLOSEST CORNER IN ALL FOUR DIRECTIONS. COLOR TO MATCH EXISTING CONDITIONS. 15. THE CONTRACTOR SHALL FURNISH AND INSTALL NEW MATERIALS AT NO THE CONTRACTOR SHALL FURNISH AND INSTALL NEW MATERIALS AT NO ADDITIONAL COST TO THE OWNER FOR THE FOLLOWING CONDITIONS: A) TO FURNISH THE WORK OF THIS CONTRACT IN WORKMANLIKE MANNER. 16. THE CONTRACTOR SHALL BE RESPONSIBLE FOR ADEQUATELY BRACING AND THE CONTRACTOR SHALL BE RESPONSIBLE FOR ADEQUATELY BRACING AND PROTECTING ALL WORK DURING CONSTRUCTION AGAINST DAMAGE, BREAKAGE, COLLAPSE, DISTORTIONS AND OFF ALIGNMENTS ACCORDING TO CODES AND STANDARDS OF GOOD PRACTICE. 17. THE CONTRACTOR SHALL INCLUDE ALL PROPRIETARY AND ASSOCIATED THE CONTRACTOR SHALL INCLUDE ALL PROPRIETARY AND ASSOCIATED SUPPLEMENTARY WORK TO PROVIDE A COMPLETE AND FINISHED INSTALLATION.

AutoCAD SHX Text AS PER USA CONGRESS ARCHITECTURAL WORKS COPYRIGHT PROTECTION ACT OF 1990 ALL IDEAS AND DESIGNS INCLUDING DERIVATIVES THEREOF, ALL DRAWINGS AND SPECIFICATIONS CONSTITUTE THE ORIGINAL COPYRIGHT WORK BY FULLER AND D'ANGELO, P.C. (F&D). THE DRAWINGS AND SPECIFICATIONS AS INSTRUMENTS OF SERVICE BY F&D ARE CREATED BY F&D FOR THIS PROJECT ONLY AND REMAIN THE PRODUCT AND PROPERTY OF F&D. ANY REPRODUCTION WITHOUT THE PRIOR CONSENT OF F&D IS PROHIBITED.

AutoCAD SHX Text PROVIDE TEMPORARY FENCE TO ENCLOSED STAGING TEMPORARY FENCE TO ENCLOSED STAGING TO ENCLOSED STAGING AREA WITH LOCKABLE GATE SYSTEMS FOR MATERIAL S FOR MATERIAL STORAGE, DUMPSTER AND PORT-A-POTTY. PROVIDE DUMPSTER, TO BE LOCATED WITH-IN FENCED , TO BE LOCATED WITH-IN FENCED AREA. . COORDINATE PARKING AREA WITH DISTRICT.

AutoCAD SHX Text

WS1

AutoCAD SHX Text

WS2

AutoCAD SHX Text

WS3

AutoCAD SHX Text

WS1

AutoCAD SHX Text

WS3

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text 10"/12"/14"x48" SURFACE MOUNTED LIGHT FIXTURE

AutoCAD SHX Text 24"x24" RECESSED OR SURFACE MOUNTED LIGHT FIXTURE

AutoCAD SHX Text 24"x48" RECESSED LIGHT FIXTURE TO BE REMOVED.

AutoCAD SHX Text

RECESSED CAN LIGHT FIXTURE

AutoCAD SHX Text

CEILING MOUNTED RECESSED SPEAKER

AutoCAD SHX Text

FIRE ALARM SMOKE DETECTOR

AutoCAD SHX Text

MOTION SENSOR

AutoCAD SHX Text

SURVEILLANCE CAMERA BUBBLE

AutoCAD SHX Text

FIRE STROBE

AutoCAD SHX Text

FACE PLATE

AutoCAD SHX Text

WIFI WAP

AutoCAD SHX Text

CEILING MOUNTED EXIT SIGN W/ DIRECTIONAL ARROW

AutoCAD SHX Text

CEILING REGISTER AND DIFFUSER

AutoCAD SHX Text EXISTING 12"x12" CEILING SYSTEM

AutoCAD SHX Text

CEILING RETURN GRILLE

AutoCAD SHX Text

EMERGENCY EXIT LIGHTS

AutoCAD SHX Text EXISTING 24"x48" CEILING SYSTEM

AutoCAD SHX Text

EXISTING RADIANT CEILING PANEL

AutoCAD SHX Text

AREA OF WORK 2ND FLOOR, SEE A10

AutoCAD SHX Text

CEILING MOUNTED EXIT SIGN

AutoCAD SHX Text

AREA OF CEILING SHEETROCK.

WS2

%%uSTAIR #3

AutoCAD SHX Text

AutoCAD SHX Text %%uCUST.

AutoCAD SHX Text

%%UMEDIA

AutoCAD SHX Text

%%UCENTER

AutoCAD SHX Text

AutoCAD SHX Text %%uROOF

AutoCAD SHX Text

AutoCAD SHX Text %%uROOF

AutoCAD SHX Text

AutoCAD SHX Text %%uROOF

AutoCAD SHX Text

AutoCAD SHX Text %%uROOF

AutoCAD SHX Text

AutoCAD SHX Text %%uGYM BELOW

AutoCAD SHX Text

AutoCAD SHX Text %%uSTAGE BELOW

AutoCAD SHX Text

AutoCAD SHX Text %%uAUDITORIUM BELOW

AutoCAD SHX Text

AutoCAD SHX Text %%uVEST.

AutoCAD SHX Text

AutoCAD SHX Text %%uSTAIR #5

AutoCAD SHX Text

%%ULARGE GROUP

AutoCAD SHX Text

%%UINSTRUCTION

AutoCAD SHX Text

%%UTELEVISION

AutoCAD SHX Text

%%USTUDIO

AutoCAD SHX Text

%%UCOMPUTER

AutoCAD SHX Text

%%ULAB.

AutoCAD SHX Text

%%UCOMPUTER

AutoCAD SHX Text

%%ULAB.

AutoCAD SHX Text

%%UWOMEN'S

AutoCAD SHX Text

%%UTOILET

AutoCAD SHX Text

%%UMEN'S

AutoCAD SHX Text

%%UTOILET

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%USCIENCE

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UWOMEN'S

AutoCAD SHX Text

%%UTOILET

AutoCAD SHX Text

%%UMEN'S

AutoCAD SHX Text

%%UTOILET

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%USTAIR #4

AutoCAD SHX Text

%%UI.T. ROOM

AutoCAD SHX Text

%%USCIENCE

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%USCIENCE

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%USCIENCE

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%USTAIR #2

AutoCAD SHX Text

%%UCORRIDOR

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UCLASSROOM

AutoCAD SHX Text

%%UTEACHER

AutoCAD SHX Text

%%UCONF.

AutoCAD SHX Text

%%UWOMEN'S

AutoCAD SHX Text

%%UTOILET

AutoCAD SHX Text

%%UMEN'S

AutoCAD SHX Text

%%UTOILET

AutoCAD SHX Text

%%STORAGE

AutoCAD SHX Text

%%USTAIR #1

AutoCAD SHX Text

%%UCORRIDOR

AutoCAD SHX Text

AREA OF WORK BASE BID

AutoCAD SHX Text

AREA OF WORK ALTERNATE #1

AutoCAD SHX Text

SOFFIT ABOVE TYP.

AutoCAD SHX Text

SEE REFLECTED CEILING PLANS ON DWG'S AR100 AND A100 FOR SCOPE OF WORK.

AREA OF WORK ALTERNATE #1

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text U

AutoCAD SHX Text V

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text U

AutoCAD SHX Text

AutoCAD SHX Text V

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text 10"/12"/14"x48" SURFACE MOUNTED LIGHT FIXTURE

AutoCAD SHX Text 24"x24" RECESSED OR SURFACE MOUNTED LIGHT FIXTURE

AutoCAD SHX Text 24"x48" RECESSED LIGHT FIXTURE

AutoCAD SHX Text

RECESSED CAN LIGHT FIXTURE

AutoCAD SHX Text

CEILING MOUNTED RECESSED SPEAKER

AutoCAD SHX Text CEILING MOUNTED EXIT SIGN w/ DIRECTIONAL ARROW

AutoCAD SHX Text

FIRE ALARM SMOKE DETECTOR

AutoCAD SHX Text

CEILING MOUNTED EXIT SIGN

AutoCAD SHX Text

MOTION SENSOR

AutoCAD SHX Text

FIRE STROBE

AutoCAD SHX Text

CEILING REGISTER AND DIFFUSER

AutoCAD SHX Text NEW 24"x24" CEILING SYSTEM

AutoCAD SHX Text

SURVEILLANCE CAMERA BUBBLE

AutoCAD SHX Text

CEILING RETURN GRILLE

AutoCAD SHX Text

EMERGENCY EXIT LIGHTS

AutoCAD SHX Text NEW 24"x48" CEILING SYSTEM

AutoCAD SHX Text

WIFI HUB

AutoCAD SHX Text

NEW GYPSUM BOARD CEILING OR SOFFIT

AutoCAD SHX Text NOTES: 1. ALL EXISTING DEVICES WITHIN REMOVED CEILING ALL EXISTING DEVICES WITHIN REMOVED CEILING AREAS SHALL BE DISCONNECTED AND SALVAGED, OR PROTECTED AND TEMPORARILY SUSPENDED FROM STRUCTURE ABOVE. 2. NOT ALL SYMBOLS ARE NECESSARILY USED ON NOT ALL SYMBOLS ARE NECESSARILY USED ON THIS PROJECT

AutoCAD SHX Text CEILING MOUNTED "AREA OF RESCUE ASSISTANCE" SIGN w/ DIRECTIONAL ARROW

AutoCAD SHX Text PRIOR TO GRID REMOVAL CONTRACT IS TO SUPPORT ALL FLEXIBLE DUCTWORK & WIRING. REMOVE EXISTING SUSPENDED ACOUSTICAL TILE CEILING AND SUSPENSION SYSTEM. ACOUSTICAL TILE CEILING AND SUSPENSION SYSTEM. ACOUSTICAL TILE CEILING AND SUSPENSION SYSTEM. THE CONTRACTOR SHALL DISCONNECT AND SALVAGE ALL LIGHTING FIXTURES, AND CEILING DEVICES. LABEL ALL WIRE/CABLE FOR DEVICE RE-INSTALL. THE CONTRACTOR IS RESPONSIBLE FOR PROVIDING TEMPORARY SUPPORT AND PROTECTING/ S RESPONSIBLE FOR PROVIDING TEMPORARY SUPPORT AND PROTECTING/ SUPPORT AND PROTECTING/ PROTECTING/ ENCAPSULATION FOR ALL CEILING MOUNTED DEVICES NOT BEING SALVAGED MOVE. . SALVAGE WINDOW TREATMENTS AND STORE IN A SAFE & SECURE LOCATION UNTIL REINSTALLED. SALVAGE EXPANSION JOINT FOR RE-FINISHING. LEAVE EXISTING BLOCKING/ MOUNTING DEVICE(S) FOR RE-USE. UNKNOWN BOX, WALL MOUNTED, NEAR CEILING, TO REMAIN.

AutoCAD SHX Text R1

AutoCAD SHX Text R2

AutoCAD SHX Text R3

AutoCAD SHX Text R4

AutoCAD SHX Text

EXISTING SKYLIGHT TO REMAIN.

AutoCAD SHX Text

EXISTING SOFFITS TO REMAIN (TYP).

AutoCAD SHX Text

(TYP.)

AutoCAD SHX Text

1. COORDINATE SALVAGE, OR SUSPENSION AND PROTECTION, OF ALL CEILING MOUNTED DEVICES, INCLUDING BUT NOT LIMITED TO COORDINATE SALVAGE, OR SUSPENSION AND PROTECTION, OF ALL CEILING MOUNTED DEVICES, INCLUDING BUT NOT LIMITED TO SECURITY DEVICES, IT DEVICES, ALARMS, DETECTORS, EXIT SIGNS, ETC. WITH THE DISTRICT. 2. CONTRACTOR IS TO PROVIDE SUPPORTS TO STRUCTURE ABOVE FOR ALL FLEXIBLE HVAC DUCTS IN AREAS OF WORK, SO THAT FLEX CONTRACTOR IS TO PROVIDE SUPPORTS TO STRUCTURE ABOVE FOR ALL FLEXIBLE HVAC DUCTS IN AREAS OF WORK, SO THAT FLEX DUCT IS NOT RESTING ON NEW CEILING OR FIXTURES. BASIS OF DESIGN: KWIK-FLEX, 1" WIDE STRAP MIN. w/ 3" WIDE LOAD DISTRIBUTOR, 5'-0" O.C. MAXIMUM AND 1/2" SLAG PER FOOT, MAXIMUM. SEE SPECIFICATIONS AND DTL 1/A650. 3. CONTRACTOR SHALL PROVIDE DUST PROTECTION, WALL-TO-WALL AND FLOOR TO CEILING AT ALL ENTRIES TO AREA-OF-WORK, CONTRACTOR SHALL PROVIDE DUST PROTECTION, WALL-TO-WALL AND FLOOR TO CEILING AT ALL ENTRIES TO AREA-OF-WORK, INCLUDING BUT NOT LIMITED TO: CLASSROOMS, CONFERENCE ROOM(S), TOILETS, STUDIO(S), I.T CLOSET(S), ENTRANCES, ETC, AND AT THE LIMITS OF WORK AREAS. PROVIDE WALK-OFF MATS AT ALL ACCESS POINTS. COVER AND PROTECT ALL EXISTING ITEMS THAT ARE TO REMAIN, WETHER FIXED OR LOOSE, INCLUDING BUT NOT LIMITED TO: BOOK SHELVES, WALL MOUNTED ITEMS, WINDOWS, AND FURNITURE (BUILT-IN OR LOOSE) THAT ARE TO REMAIN. UPON ACCEPTANCE OF CEILING INSTALLATION, CONTRACTOR SHALL REMOVE ALL DUST PROTECTION AND PERFORM ALL REMEDIAL CLEANUP, TO THE OWNERS SATISFACTION. 4. PROVIDE SUPPORT(S) FOR WIRE/CABLING THAT ARE LAYING LOOSE NEAR TO, OR ON TOP OF, THE EXISTING GRID/TILES THAT ARE PROVIDE SUPPORT(S) FOR WIRE/CABLING THAT ARE LAYING LOOSE NEAR TO, OR ON TOP OF, THE EXISTING GRID/TILES THAT ARE BEING REMOVED. WIRE/CABLE SHALL BE BUNDLE AND SECURE, SEE SPECIFICATIONS AND DTL 5/A650. 5. DRAWINGS AND NOTES INDICATE ONLY MAJOR SCOPE OF REMOVALS. CONTRACTOR IS REQUIRED TO REMOVE ANY AND ALL ITEMS NOT DRAWINGS AND NOTES INDICATE ONLY MAJOR SCOPE OF REMOVALS. CONTRACTOR IS REQUIRED TO REMOVE ANY AND ALL ITEMS NOT SHOWN AS REQUIRED TO SUIT ALL NEW WORK. CONTRACTOR IS REQUIRED TO TEMPORARILY SALVAGE AND STORE OR SUSPEND AND PROTECT ANY AND ALL ITEMS REQUIRED TO SUIT ALL NEW WORK, COORDINATE WITH OWNER FOR STORING LOCATIONS. 6. EXISTING MECHANICAL AND ELECTRICAL EQUIPMENT, ETC. SHOWN ON DRAWINGS IS APPROXIMATELY LOCATED. CONTRACTOR IS TO EXISTING MECHANICAL AND ELECTRICAL EQUIPMENT, ETC. SHOWN ON DRAWINGS IS APPROXIMATELY LOCATED. CONTRACTOR IS TO DETERMINE EXACT LOCATIONS OF ALL ITEMS IN THE FIELD. 7. CONTRACTOR IS TO VERIFY ANY MAJOR DEVIATIONS FROM DRAWINGS OR STRUCTURAL OBSTRUCTIONS. THESE SHALL BE BROUGHT TO CONTRACTOR IS TO VERIFY ANY MAJOR DEVIATIONS FROM DRAWINGS OR STRUCTURAL OBSTRUCTIONS. THESE SHALL BE BROUGHT TO THE OWNER'S REPRESENTATIVE'S ATTENTION. 8. ALL SURFACES DISTURBED BY REMOVALS SHALL BE PATCHED/REPAIRED TO MATCH EXISTING ADJACENT FINISHES. ALL SURFACES DISTURBED BY REMOVALS SHALL BE PATCHED/REPAIRED TO MATCH EXISTING ADJACENT FINISHES. 9.

This is the start of the file's text. The full file is on GovTribe.

Other files

File	Type	Posted
2573-26_May_11_26_solicitation_doc.pdf	PDF	Apr 17, 2026
2573-26_Apr_20_26_solicitation_doc.pdf	PDF	Apr 17, 2026
2573-26_May_4_26_solicitation_doc.pdf	PDF	Apr 17, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

File details come from the government source that posted it. Updated May 4, 2026.