N6449825FX137_E5_NGSC SIBS Shipsets and INCO_F.E. 09042025.pdf

14. SHIP TO

ORDER FOR SUPPLIES OR SERVICES

PAGE 1 OF

1. CONTRACT/PURCH ORDER/AGREEMENT NO. 2. DELIVERY ORDER/CALL NO. 3. DATE OF ORDER/CALL

(YYYYMMMDD)

4. REQUISITION/PURCH REQUEST NO. 5. PRIORITY

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than 6) CODE 8. DELIVERY FOB

DESTINATION

OTHER

(See Schedule if other)

10. DELIVER TO FOB POINT BY (Date)

(YYYYMMMDD)

12. DISCOUNT TERMS

13. MAIL INVOICES TO THE ADDRESS IN BLOCK

11. X IF BUSINESS IS

SMALL

SMALL DISAD-

VANTAGED

WOMEN-OWNED

CODE 15. PAYMENT WILL BE MADE BY CODE MARK ALL

PACKAGES AND

PAPERS WITH

IDENTIFICATION

NUMBERS IN

BLOCKS 1 AND 2.

16.

TYPE

OF

ORDER

DELIVERY/

CALL

PURCHASE

This delivery order/call is issued on another Government agency or in accordance with and subject to terms and conditions of above numbered contract.

Reference your furnish the following on terms specified herein.

ACCEPTANCE. THE CONTRACTOR HEREBY ACCEPTS THE OFFER REPRESENTED BY THE NUMBERED PURCHASE ORDER AS IT MAY PREVIOUSLY HAVE BEEN OR IS NOW MODIFIED, SUBJECT TO ALL OF THE TERMS AND CONDITIONS SET FORTH, AND AGREES TO PERFORM THE SAME.

If this box is marked, supplier must sign Acceptance and return the following number of copies:

NAME OF CONTRACTOR SIGNATURE TYPED NAME AND TITLE DATE SIGNED

(YYYYMMMDD)

17. ACCOUNTING AND APPROPRIATION DATA/LOCAL USE

18. ITEM NO. 19. SCHEDULE OF SUPPLIES/SERVICES

20. QUANTITY

ORDERED/

ACCEPTED*

21.

UNIT

22. UNIT PRICE 23. AMOUNT

*If quantity accepted by the Government is same as quantity ordered, indicate by X.

If different, enter actual quantity accepted below quantity ordered and encircle.

24. UNITED STATES OF AMERICA 25. TOTAL

26.

DIFFERENCES

30. INITIALS

27a. QUANTITY IN COLUMN 20 HAS BEEN

INSPECTED RECEIVED ACCEPTED, AND CONFORMS TO

THE CONTRACT EXCEPT AS NOTED:

c. DATE

(YYYYMMMDD)

b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

28. SHIP. NO.

PARTIAL

FINAL

31. PAYMENT

COMPLETE

PARTIAL

FINAL

29. D.O. VOUCHER NO.

32. PAID BY 33. AMOUNT VERIFIED CORRECT FOR

34. CHECK NUMBER

35. BILL OF LADING NO.

42. S/R VOUCHER NO.

36. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT.

a. DATE

(YYYYMMMDD)

b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

37. RECEIVED

AT

38. RECEIVED BY (Print) 39. DATE RECEIVED

(YYYYMMMDD)

40. TOTAL CON-

TAINERS

41. S/R ACCOUNT NUMBER

DD FORM 1155, DEC 2001 PREVIOUS EDITION IS OBSOLETE.

CONTRACTING/ORDERING OFFICER

9. CONTRACTOR CODE FACILITY

NAME

AND

ADDRESS

BY:

d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

f. TELEPHONE NUMBER g. E-MAIL ADDRESS

N6449821G4003 N6449825FX137 9/4/2025 N0002425PR18552 DO-A3

NSWC PHILADELPHIA DIV

5001 S BROAD STREET

PHILADELPHIA PA 19112-1403

PHILADELPHIA, PA 19112-1403

United States MATTHEW PARLETT, Contracting Officer, Telephone: 2679905870 Email: matthew.d.parlett.civ@us.navy.mil NICHOLAS SWANSON, Contract Specialist, Telephone: 2157562623 Email: nicholas.g.swanson.civ@us.navy.mil

N64498

03956 Northrop Grumman Systems Corporation Melinda Hill

1070 SEMINOLE TRL

CHARLOTTESVILLE, VA 22901-2827

USA

Melinda Hill, Telephone: 4349742474 Email: melinda.hill@ngc.com

SEE CONTINUATION

Net Days 30

HQ0338

SEE CONTINUATION

HQ0338

DoDAAC: HQ0338

DFAS - COLUMBUS CENTER

SOUTH ENTITLEMENT OPERATIONS

COLUMBUS OH 43218-2317

COLUMBUS, OH 43218-2317

United States

Northrop Grumman Systems Corporation

SEE SECTION G

SEE CONTINUATION

Matthew Parlett $2,814,859.00

N6449825FX137

Section A - Solicitation/Contract Form SIBS Shipsets and INCO Spare Kits

North American Industry Classification System (NAICS): 334511

This order is issued under and pursuant to the provisions of N6449821G4003 (the "Agreement"). Ther terms and conditions of the Agreement are hereby incorporated by reference and, except as provided herein by this order, remain in full force and effect.

Reference NGSC Quote # 2007025387 dated 08 July 2025 in response RFQ # N6449825R4048. Offer is accepted as to all items. See schedule

Section B - Supplies or Services & Prices or Costs Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

SCALABLE IBS SYSTEM; NGSC PN - 4306409-1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Company Part Number: 1023248738 Product Service Code: 2040 Pricing Arrangement: Firm Fixed Price

CIN: 130128724600001

ACRN: AD

PR Number: N0002425PR18552 PR Line Item Number: 0001

1 Each USD 820,473.00

Firm Price

USD 820,473.00

Funded Amount

USD 820,473.00

SCALABLE IBS SYSTEM; NGSC PN - 4306409-1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Company Part Number: 1023248738 Product Service Code: 2040 Pricing Arrangement: Firm Fixed Price

CIN: 130128724600002

ACRN: AE

PR Number: N0002425PR18552 PR Line Item Number: 0002

1 Each USD 820,473.00

Firm Price

USD 820,473.00

Funded Amount

USD 820,473.00

SCALABLE IBS SYSTEM; NGSC PN - 4306409-1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Company Part Number: 1023248738 Product Service Code: 2040 Pricing Arrangement: Firm Fixed Price

CIN: 130128724600003

1 Each USD 820,473.00

Firm Price

USD 820,473.00

Funded Amount

USD 820,473.00

ACRN: AA

PR Number: N0002425PR18552 PR Line Item Number: 0003

INCO SPARES KIT; NGSC PN - 4306425-1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Company Part Number: 1022971659 Product Service Code: 2040 Pricing Arrangement: Firm Fixed Price

CIN: 130128724600004

ACRN: AC

PR Number: N0002425PR18552 PR Line Item Number: 0004

1 Each USD 176,720.00

Firm Price

USD 176,720.00

Funded Amount

USD 176,720.00

INCO SPARES KIT; NGSC PN - 4306425-1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Internal Number: 1022971659 Product Service Code: 2040 Pricing Arrangement: Firm Fixed Price

CIN: 130128724600005

ACRN: AB

PR Number: N0002425PR18552 PR Line Item Number: 0005

1 Each USD 176,720.00

Firm Price

USD 176,720.00

Funded Amount

USD 176,720.00

Section C - Description/Specifications/Statement of Work

Requirements SIBS Shipsets and INCO Spare Kits

Section D - Packaging and Marking

Section E - Inspection and Acceptance Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: N/A

DoDAAC: N64498 CountryCode: USA

NSWC PHILADELPHIA DIV

1601 LANGLEY AVE BUILDING 542, PHILADELPHIA PA 19112

PHILADELPHIA, PA 19112

UNITED STATES

James Meehan, ECDIS Operations Lead Email: james.t.meehan.civ@us.navy.mil Telephone: 215-897-1535

Inspection and Acceptance Location

Both Destination Instructions: N/A

DoDAAC: N64498 CountryCode: USA

NSWC PHILADELPHIA DIV

1601 LANGLEY AVE BUILDING 542, PHILADELPHIA PA 19112

PHILADELPHIA, PA 19112

UNITED STATES

James Meehan, ECDIS Operations Lead Email: james.t.meehan.civ@us.navy.mil Telephone: 215-897-1535

Inspection and Acceptance Location

Both Destination Instructions: N/A

DoDAAC: N64498 CountryCode: USA

NSWC PHILADELPHIA DIV

1601 LANGLEY AVE BUILDING 542, PHILADELPHIA PA 19112

PHILADELPHIA, PA 19112

UNITED STATES

James Meehan, ECDIS Operations Lead Email: james.t.meehan.civ@us.navy.mil Telephone: 215-897-1535

Inspection and Acceptance Location

Both Destination Instructions: N/A

DoDAAC: N64498 CountryCode: USA

NSWC PHILADELPHIA DIV

1601 LANGLEY AVE BUILDING 542, PHILADELPHIA PA 19112

PHILADELPHIA, PA 19112

UNITED STATES

James Meehan, ECDIS Operations Lead Email: james.t.meehan.civ@us.navy.mil Telephone: 215-897-1535

Inspection and Acceptance Location

Both Destination Instructions: N/A

DoDAAC: N64498 CountryCode: USA

NSWC PHILADELPHIA DIV

1601 LANGLEY AVE BUILDING 542, PHILADELPHIA PA 19112

PHILADELPHIA, PA 19112

UNITED STATES

James Meehan, ECDIS Operations Lead Email: james.t.meehan.civ@us.navy.mil Telephone: 215-897-1535

Section F - Deliveries or Performance From date of lead time event to delivery 16 Month Date of Award

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery Schedule From date of lead time event to delivery 16 Month Date of Award

1 Each Ship To DoDAAC: N64498 CountryCode: USA

NSWC PHILADELPHIA DIV

1601 LANGLEY AVE BUILDING 542,

PHILADELPHIA PA 19112

PHILADELPHIA, PA 19112

UNITED STATES

James Meehan, ECDIS Operations Lead Email: james.t.meehan.civ@us.navy.mil Telephone: 215-897-1535

FoB Details Contractor Destination

Delivery Schedule From date of lead time event to delivery 16 Month Date of Award

1 Each Ship To DoDAAC: N64498 CountryCode: USA

NSWC PHILADELPHIA DIV

1601 LANGLEY AVE BUILDING 542,

PHILADELPHIA PA 19112

PHILADELPHIA, PA 19112

UNITED STATES

James Meehan, ECDIS Operations Lead Email: james.t.meehan.civ@us.navy.mil Telephone: 215-897-1535

FoB Details Contractor Destination

Delivery Schedule From date of lead time event to delivery 16 Month Date of Award

1 Each Ship To DoDAAC: N64498 CountryCode: USA

NSWC PHILADELPHIA DIV

1601 LANGLEY AVE BUILDING 542,

PHILADELPHIA PA 19112

PHILADELPHIA, PA 19112

UNITED STATES

James Meehan, ECDIS Operations Lead Email: james.t.meehan.civ@us.navy.mil Telephone: 215-897-1535

FoB Details Contractor Destination

Delivery Schedule From date of lead time event to delivery 16 Month Date of Award

1 Each Ship To DoDAAC: N64498 CountryCode: USA

NSWC PHILADELPHIA DIV

1601 LANGLEY AVE BUILDING 542,

PHILADELPHIA PA 19112

PHILADELPHIA, PA 19112

UNITED STATES

James Meehan, ECDIS Operations Lead Email: james.t.meehan.civ@us.navy.mil Telephone: 215-897-1535

FoB Details Contractor Destination

Delivery Schedule From date of lead time event to delivery 16 Month Date of Award

1 Each Ship To DoDAAC: N64498 CountryCode: USA

NSWC PHILADELPHIA DIV

1601 LANGLEY AVE BUILDING 542,

PHILADELPHIA PA 19112

PHILADELPHIA, PA 19112

UNITED STATES

James Meehan, ECDIS Operations Lead Email: james.t.meehan.civ@us.navy.mil Telephone: 215-897-1535

Section G - Contract Administration Data

ACRN LOA Total Amount

AA

1721611 1392 260 SH377 0 050120 2D 000000 A20009429845

USD 820,473.00Line Item PR/MIPR - PR Line Item# CIN Amount

CLIN 0003 N0002425PR18552 - 0003 130128724600003 USD 820,473.00

ACRN LOA Total Amount

AB

1731611 1388 260 SH377 0 050120 2D 000000 A40009429845

USD 176,720.00Line Item PR/MIPR - PR Line Item# CIN Amount

CLIN 0005 N0002425PR18552 - 0005 130128724600005 USD 176,720.00

ACRN LOA Total Amount

AC

1731611 1393 260 SH377 0 050120 2D 000000 A30009429845

USD 176,720.00Line Item PR/MIPR - PR Line Item# CIN Amount

CLIN 0004 N0002425PR18552 - 0004 130128724600004 USD 176,720.00

ACRN LOA Total Amount

AD

1741611 C271 260 24VCS 0 050120 2D 000000 A00009429845

USD 820,473.00Line Item PR/MIPR - PR Line Item# CIN Amount

CLIN 0001 N0002425PR18552 - 0001 130128724600001 USD 820,473.00

ACRN LOA Total Amount

AE

1741611 C271 260 24VCS 0 050120 2D 000000 A10009429845

USD 820,473.00Line Item PR/MIPR - PR Line Item# CIN Amount

CLIN 0002 N0002425PR18552 - 0002 130128724600002 USD 820,473.00

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.

WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report COMBO

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.

when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC HQ0338

Issue By DoDAAC N64498

Admin DoDAAC S1002A

Inspect By DoDAAC N64498

Ship To Code N64498

Ship From Code N/A

Mark For Code N64498

Service Approver (DoDAAC) N/A

Service Acceptor (DoDAAC) N64498

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

Matthew Amato; email; matthew.c.amato.civ@us.navy.mil; 215-360-4522

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Caitlin Tamase; email; caitlin.i.tamase.civ@us.navy.mil, 215-756-2962

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

G-242-H001 GOVERNMENT CONTRACTADMINISTRATION POINTS-OF-CONTACT AND

RESPONSIBILITIES (NAVSEA) (OCT 2023) (Oct 2023)

(a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time.

(b) The contracting officer is the only person authorized to change this contract or orders issued thereunder. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract.

(c) The points of contact are as follows:

(i) The Procuring Contracting Officer (PCO) is:

Name: Matthew Parlett Address:

5001 S. Broad Street Philadelphia, PA 19112 Phone: 267-990-5083 E-mail: Matthew.D.Parlett.civ@us.navy.mil

(ii) The Contract Specialist is:

Name: Nicholas Swanson Address:

5001 S. Broad Street Philadelphia, PA 19112 Phone: 215-756-2623 E-mail: nicholas.g.swanson.civ@us.navy.mil

(d) The Contracting Officer's Representative (COR) is the contracting officer's appointed representative for technical matters. The COR is not a contracting officer and does not have the authority to direct the accomplishment of effort which is beyond the scope of the contract or to otherwise change any contract requirements. An informational copy of the COR appointment letter, which provides a delineation of COR authority and responsibilities, will be provided upon award of this contract.

The Contracting Officer's Representative (COR) is:

Name: Matthew Amato Address:

5001 S. Broad Street Philadelphia, PA 19112 Phone: 215-360-4522 E-mail: matthew.c.amato.civ@us.navy.mil

(f) The Technical Point of Contact (TPOC) is the contracting officer's representative for technical matters when a COR is not appointed. The TPOC is responsible for technical issues of contract administration, such as providing all items of Government Furnished Information (GFI), Government Furnished Material (GFM) and Government Furnished Equipment (GFE) if specified in the contract as well as the inspection and acceptance of all contract deliverables.

The Technical Point of Contact (TPOC) is:

Name: James Meehan Address:

5001 S. Broad Street Philadelphia, PA 19112 Phone: 215-897-1535 E-mail: james.t.meehan.civ@us.navy.mil

(j) The Contractor's point of contact for performance under this contract is:

Name: Alyson West Address:

1070 Seminole Trail Charlottesville, VA 22901

Phone: 434-974-2715 E-mail: alyson.west@ngc.com

(End of Text)

Section H - Special Contract Requirements

Section I - Contract Clauses DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at . https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .N/A

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .N/A

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) . Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier; (1)

Serialize within the part, lot, or batch number; or (2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (3)

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site /uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , Unique Item Identifier Report for Embedded N/A Items, Contract Data Requirements List, DD Form 1423.

(g) . If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with Subcontracts paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

Section J - List of Attachments