25-01869_IUID_REPORT.pdf
PDF 61 KB Posted
- Attached to
- NOZZLE, FUEL INJECTI
- Solicitation number
- SPRTA126Q0320
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Item Unique Identification (IUID) Checklist document prepared by the Air Force Life Cycle Management Center (AFLCMC/LPSE) that establishes marking and identification requirements for a specific part.
The document applies to National Stock Number (NSN) 2915014474514NZ, Version 5, identified as a fuel injection nozzle. The IUID requirement falls under DFARS 252.211.7003, Section (c)(1)(i). The item initiator is Sarah B. Billingsley, contactable at 405-734-2665 (commercial) or 884-2665 (DSN). The associated CAGE codes are 65065 and 77445, with reference numbers 519P292-01 and 4083569. Marking must be performed in accordance with MIL-STD-130 using direct part marking via laser etching as the preferred method. The marking location specified is the top side of the support flange. If direct marking is not feasible, alternative bag/tag identification is acceptable. The document also includes a section for embedded items, though no specific embedded items are detailed in the current version. This checklist was generated by PRPS using Jasper Reports on 28 May 2025.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRTA126Q0320.pdf | ||
| 25-01869_Special_Pkg.pdf | ||
| 25-01869_TRNSPDATA_REPORT.pdf | ||
| 25-01869_PKGRQMT_REPORT.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST
I. IUID DETAILS: DFARS 252.211.7003
SECTION (c) (1) (i) APPLIES TO THE FOLLOWING:
ITEM REQUIRING IUID MARKING
NSN
2915014474514NZ
VERSION NUMBER
NOUN
NOZZLE,FUEL INJECTI
INITIATOR
Billingsley, Sarah B
ORGANIZATION CODE / OFFICE SYMBOL
AFLCMC / LPSE
COMMERCIAL PHONE
405-734-2665
DSN PHONE
884-2665
CAGE / REFERENCE NUMBER
65065 / 519P292-01 77445 / 4083569
MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130
MARKING GUIDANCE
Recommended Marking Instruction
ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE
Direct Part Mark
MARKING METHOD
Laser Etched
DESCRIPTION / LOCATION
Direct Part Marking is preferred, if unable to directly mark the part then Bag/Tag can be used. If Direct Part Marking is used the IUID must be etched on the top side of the support flange.
REMARKS
ATTACHMENT(S)
II. EMBEDDED ITEMS
SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:
NSN NOUN
CAGE / REFERENCE NUMBER
ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 2915014474514NZ
MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE MARKING METHOD
DESCRIPTION / LOCATION
REMARKS
ATTACHMENT(S)
Page 1 of 1IUID Version 5Generated by PRPS using Jasper Reports on 28 May 2025
File details come from the government source that posted it. Updated .