24Q0073_RFQ package.pdf

Embassy of the United States of America

Lima, Peru

August L2,2024

To: Prospective Offerors

Subject: Request for Quotations 19PE5024Q0073 - Knoll Office Furniture supply and installation

The US Embassy, Lima, Peru, would like to invite your company to submit a proposal for the item of the subject. The Request for Quotations (RFa) consists of the following sections:

Standard Form SF-1449 and continuation sheets

Scope of Work lnstructions to Offerors FAR & DOSAR clauses euestions regarding this RFQ must be sent in English to Mr. Christian Rivas at rivascr@state.gov no later than August 2L,2024; the answers will be advertised by August 26,2024

The Embassy plans to award a purchase order to the responsible company submitting an acceptable quotation at the lowest price. You are encouraged to make your quotation competitive. you are also cautioned against any collusion with other potential offerors regarding price quotations to be submitted. The RFQ does not commit the American Embassy to make any award. The Embassy may cancel this RFQ or any part of it.

your proposal must be submitted by email in a single file using word or PDF format to the above email address by September 16, 2024, at or before 10:00 a.m. (local date and time). oral quotations will not be accePted.

Sincerely, Curt Whittaker Contracting Officer

1.

2.

3.

4.

Enclosure: As stated

AUTORIZED FOR LOCAL REPRODUCTION STANDARD FORM 1449 (REV. 02/2012)

PREVIOUS EDITION IS NOT USABLE Computer Generated Prescribed by GSA - FAR (48 CFR) 53.212

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER

PR12755894

PAGE 1 OF 61 PAGES

2. CONTRACT NO. 3. AWARD/ EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER

19PE5024Q0073

6. SOLICITATION ISSUE

DATE

08/12/2024

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME Christian R Rivas

b. TELEPHONE NUMBER(No collect calls) (51 1) 618-2192

8. OFFER DUE DATE/

LOCAL TIME

09/16/2024 / 10:00

CODE PE500 10. THIS ACQUISITION IS X UNRESTRICTED OR SET ASIDE: % FOR:

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS

HUBZONE SMALL

BUSINESS

(WOSB) ELLIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM NAICS:

EDWOSB EMERGING SMALL BUSINESS

9. ISSUED BY

AMERICAN EMBASSY LIMA

Av. Lima Polo cdra 2 s/n, Monterrico, Surco ATTN: GSO/Procurement Lima

PERU

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS 8 (A) SIZE STANDARD:

13b. RATING11. DELIVERY FOR FOB DESTINAT-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS 13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

14. METHOD OF SOLICITATION

X RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

AMERICAN EMBASSY LIMA

Av. Lima Polo cdra 2 s/n, Monterrico, Surco, GSO/Warehouse Lima

PERU

AMERICAN EMBASSY LIMA

Av. Lima Polo cdra 2 s/n, Monterrico, Surco ATTN: GSO/Procurement Lima

PERU

CODE FACILITY

CODE

17a. CONTRACTOR/

OFFERER

TELEPHONE NO.

18a. PAYMENT WILL BE MADE BY

AMERICAN EMBASSY LIMA

Av. Lima Polo cdra 2 s/n, Monterrico, Surco ATTN: GSO/Procurement Lima

PERU

CODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

X 27a.SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA X ARE ARE NOT ATTACHED

27b.CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN _ __ COPIES

TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS

SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS

SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED HEREIN.

29. AWARD OF CONTRACT: REF. _ _______________ OFFER DATED

_ __________. YOUR OFFER ON SOLICITATION (BLOCK 5), INCLUDING ANY

ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN, IS ACCEPTED AS

TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

ITEM NO. 20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: _______________________________

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

36. PAYMENT 37. CHECK NUMBER

PARTIAL FINAL COMPLETE PARTIAL FINAL

38. S/R ACCOUNT NO. 39. S/R VOUCHER NO. 40. PAID BY

41.a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 42a. RECEIVED BY (Print) 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41C. DATE

42b. RECEIVED AT (Location)

42c. DATE REC’D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Supply and install Knoll office furniture in accordance to the attached Scope and related documents (see continuation pages).

1 all

RFQ 19PE5024Q0069

(Continuation of SF-1449)

Page | 2

DESK TYPE 1

Item Part number Description Qty Unit Price Amount

1 KHATA2ZES Z-Cable Manager, Standard Electric 2

2 KHATTRR5223N

Reff Profiles Worksurface, Rectangular, 52Wx23Dx1-1/4H, no grommet (for use with k. stand) Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

3 TBCP Tone Base Cleat Plate 2

4 KHATB3CEM24GD

k. stand base 3.0 C-leg Standard Electric Medium Adjustable Crossbar (41.1" - 59.5") 24"D Glides Digital Switch, Medium Adjustable Width Base for use with tops 42"- 90" Finish: JET BLACK+

5 R2WMPB Power Bar 7-Outlet/7 foot cord 2

6 R2P161J

Pedestal, Box/Box/File, 16Wx19Dx28- 3/8H, Stepped Base, for 28-3/8" planning Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

7 RPDHB16

Pedestal Back, 16Wx28-3/8H, for 28- 3/8" planning

8 RSD722

Worksurface, Rectangular, 72Wx24Dx1-1/2H Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

9 RSDHC3

Base Support Column, 3" diameter Finish: JET BLACK

10 KSPEC1 Set of 1 cores/keys (black) 2

DESK TYPE 2

11 KHATA2ZES Z-Cable Manager, Standard Electric 2

12 KHATTRR5223N

Reff Profiles Worksurface, Rectangular, 52Wx23Dx1-1/4H, no grommet (for use with k. stand) Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

13 TBCP Tone Base Cleat Plate 2

Page | 3

14 KHATB3CEM24GD

k. stand base 3.0 C-leg Standard Electric Medium Adjustable Crossbar (41.1" - 59.5") 24"D Glides Digital Switch, Medium Adjustable Width Base for use with tops 42"- 90" Finish: JET BLACK

15 R2WMPB Power Bar 7-Outlet/7 foot cord 2

16 R2P161J

Pedestal, Box/Box/File, 16Wx19Dx28- 3/8H, Stepped Base, for 28-3/8" planning Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

17 ROHHSHC661DH

Hutch, Single High Case, Hinged Door, cubby concealed, 66Wx15Dx20H, for 28-3/8" planning Finish: TECHWOOD

VENEER (V1) EN MEDIUM OAK (Y329)

18 ROHHSHS661DHDN

Hutch, Single High Surround, drilled for Hinged Door unit, 66Wx15Dx43H, for 1-1/2" worksurface, Unfinished Back, for 28-3/8" planning Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

19 RPDHB16

Pedestal Back, 16Wx28-3/8H, for 28- 3/8" planning

20 RSD662

Worksurface, Rectangular, 66Wx24Dx1-1/2H Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

21 RSDHC3

Base Support Column, 3" diameter Finish: JET BLACK

22 KSPEC1 Set of 1 cores/keys (black) 2

23 KSPEC2 Set of 2 cores/keys (black) 2

DESK TYPE 3

24 KHATA2ZES Z-Cable Manager, Standard Electric 2

25 KHATTRR5223N

Reff Profiles Worksurface, Rectangular, 52Wx23Dx1-1/4H, no grommet (for use with k. stand) Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

26 TBCP Tone Base Cleat Plate 2

Page | 4

27 KHATB3CEM24GD

k. stand base 3.0 C-leg Standard Electric Medium Adjustable Crossbar (41.1" - 59.5") 24"D Glides Digital Switch, Medium Adjustable Width Base for use with tops 42"- 90" Finish: JET BLACK

28 R2WMPB Power Bar 7-Outlet/7 foot cord 2

29 R2P161J

Pedestal, Box/Box/File, 16Wx19Dx28- 3/8H, Stepped Base, for 28-3/8" planning Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

30 ROMHCSHP721

Overhead Cabinet, Wall Hung, Hinged Doors, cubby exposed, 72Wx15Dx20H, for 28-3/8" planning Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

31 RPDHB16

Pedestal Back, 16Wx28-3/8H, for 28- 3/8" planning

32 RSD722

Worksurface, Rectangular, 72Wx24Dx1-1/2H Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

33 RSDHC3

Base Support Column, 3" diameter Finish: JET BLACK

34 KSPEC1 Set of 1 cores/keys (black) 2

35 KSPEC2 Set of 2 cores/keys (black) 2

CABINETS

36 RC863DHG

Cabinet with 2 File Drawers Below, Hinged Doors Above, 86Hx36Wx24D, Flush Base, for 28-3/8" planning Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

37 RC813DHGHR

Cabinet with 2 File Drawers Below, Right Hinged Door Above, 86Hx16Wx24D, Flush Base, for 28-3/8" planning Finish: TECHWOOD VENEER (V1) EN

MEDIUM OAK (Y329)

38 KSPEC2 Set of 2 cores/keys (black) 5

PANELS

39 DP5PE50 Panel End Assembly, 50H, metal flat 3

Page | 5

40 DP8CMMRR5060

Preconfigured Panel, Topway, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2, 50Hx60W

41 DFFCUS

Frame Freestanding Foot, Center Universal, Single Pack

42 DFFEUD

Frame Freestanding Foot, End Universal, Double Pack

43 DFFEUS

Frame Freestanding Foot, End Universal, Single Pack

44 DP3PWS50 Panel/Screen Wall Starter, 50H 1

45 DP5TCTSP

Panel-to-Panel Top Cap Transition, used with metal flat - Single Pack

46 DP8PPC

Panel to Panel Connector, In Line, 10 Pack

SERVICE

47 Local installation service 1

Total

To assure timely and fair consideration of your proposal, you must follow the instructions contained herein. Proposals must be complete, self-sufficient, and respond directly to the requirement of this RFQ. Failure to provide requested information in the format specified in this section may result in an unfavorable evaluation or non-consideration of your company’s proposal.

The Offeror/Quoter shall identify and explain/justify any deviations, exceptions, or conditional assumptions taken with respect to any of the instructions or requirements of this request for quotation.

The Government intends to award a Firm Fixed Price (FFP) purchase order payable entirely in US dollars or in the local currency.

The due date to receive proposals is September 16, 2024 at 10:00 a.m.

Pricing The price shall include all direct and indirect costs, overhead, general and administrative expenses, per diem, travel, profit, shipping/delivery charges, insurance, where applicable.

Validity of quotes Quotes must be valid for 30 days from the closing date for this solicitation.

Page | 6

Place Of Delivery Suvi Global Services LLC: 11380 NW 34th ST, Doral, FL 33178

Delivery date Delivery should be made to the place of delivery stated herewith within 60 days after receipt of the order.

Warranty Equipment shall have a three-year warranty against manufacturing defects.

Payment Terms Net 30 days. Electronic payments to bank accounts will normally be processed within 30 calendar days after receipt of goods and services and original invoice.

SAM Registration Offerors are required to have an active registration of their companies in the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information/instructions on how to register can be found at www.sam.gov .

Shipping and Customs (if applicable) The Embassy’s freight forwarder will dispatch the order to the port of Callao in Lima, Peru.

Upon arrival of the order, the Embassy personnel will process the tax exemption paperwork before the Peruvian Customs authorities.

Proposal Format and Content

• Submit your proposal in one (1) single file, Word or PDF format. To be considered in the evaluation you must complete and submit the following:

➢ SF-1449 (fields 17a, 23, 24, 30a, 30b and 30c)

➢ The Certifications and Representations contained in Section 3, where applicable

➢ The proposed local warranty duration and any exclusions

➢ Proof of your company’s registration in the System for Award Management (SAM)

• If applicable, provide proof that equipment will be sourced through authorized distribution channels, (documented business agreement and/or business partnership).

http://www.sam.gov/

Page | 7

ISC

Version 01

Draft A. Barboza

Check :

IRM - ISC Scope of Work Approve : ISC

Date : 08/05/2024

Page : 7 of 3

Background. - This scope of work (SOW) will serve GSO/Procurement unit and the vendor to have a better sense of what DTO\Systems wants to purchase, where it will be installed and the timeframe for installation.

Knoll Manufacturer is a GSA Supplier and part of OBO Furniture Program, and their products are protected for patent rights, which allow them to manufacture the products with the same style, color and pattern, which is being used in Lima Post Buildings.

DTO\Systems staff will move temporarily to various locations during the furniture installation to continue supporting the Mission staff.

Furniture finish: Techwood Veneer (V1) EN Medium Oak (Y329) Legs/handles: JET BLACK Power: Power bar 7-outlet/7foot cord for each desk

Description. - The Chancery building room 201E that currently has six working spaces for DTO\Systems staff to be replaced. (see room layout and 3D in picture below) New furniture is to replace existing old furniture.

Room dimensions in the diagram below.

Page | 8

Draft A. Barboza

Check :

IRM - ISC Scope of Work Approve : ISC

Page : 8 of 3

2. The second two working spaces highlighted in yellow are similar, facing back-to-back from the fixed desk and shelf. Each working space has one desk with three drawers, one upper shelf with doors and one main table with electric adjustable mechanism.

Details.

1. The first two working spaces highlighted in yellow are similar, facing back-to-back. Each working space has one desk with three drawers and one main table with electric adjustable mechanism.

Room layout and 3D diagrams with furniture are depicted below.

Page | 9

Draft A. Barboza

Check :

IRM - ISC Scope of Work Approve : ISC

Page : 9 of 3

4. Four cabinets with two file drawers below, hinged doors above.

(86Hx36Wx24D). And one cabinet with two file drawers below, right hinged doors above. (86Hx16Wx24D).

5. Three panel assembly. Are to be installed as depicted in diagrams below.

Metal frame color: Ultra Black

3. The third two working spaces highlighted in yellow are similar, facing back-to-back from main table with electric adjustable mechanism. The fixed desk and shelf are to be located side-by-side. A divider is to be placed between both spaces (see 5. for divider specifications). Each fixed desk has three drawers and one hanged shelf with doors.

Page | 10

SECTION 2 - INSTRUCTIONS TO OFFERORS

52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (Sep 2023)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation. However, the small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition—

(1)Is set aside for small business and has a value above the simplified acquisition threshold;

(2)Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(3)Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show—

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of offers;

(3) The name, address, and telephone number of the offeror;

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) "Remit to" address, if different than mailing address;

https://www.gsa.gov/forms-library/solicitationcontractorder-commercial-items

Page | 11

(8) A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information);

and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during preaward testing.

(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with FAR subpart 4.10), or alternative commercial products or commercial services for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of offers.

(1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.

(2) https://www.acquisition.gov/far/part-52#FAR_52_212_3 https://www.acquisition.gov/far/part-52#FAR_52_212_3 https://www.gsa.gov/forms-library/solicitationcontractorder-commercial-items https://www.acquisition.gov/far/part-4#FAR_Subpart_4_10

Page | 12

(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and-

(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or

(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government’s control prior to the time set for receipt of offers; or

(C) If this solicitation is a request for proposals, it was the only proposal received.

(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.

(g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint.

Page | 13

However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.

(h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.

(i) Availability of requirements documents cited in the solicitation.

(1)

(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101–29, and copies of Federal specifications, standards, and product descriptions can be downloaded from the ASSIST website at https://assist.dla.mil.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained from the address in paragraph (i)(1)(i) of this provision.

(2) Most unclassified Defense specifications and standards may be downloaded from the ASSIST website at https://assist.dla.mil.

(3) Defense documents not available from the ASSIST website may be requested from the Defense Standardization Program Office by—

(i) Using the ASSIST feedback module ( https://assist.dla.mil/feedback); or

(ii) Contacting the Defense Standardization Program Office by telephone at 571– 767–6688 or email at assisthelp@dla.mil.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(j) Unique entity identifier.(Applies to all offers that exceed the micro-purchase threshold, and offers at or below the micro-purchase threshold if the solicitation requires the Contractor to be registered in the System for Award Management (SAM).) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity identifier that identifies the Offeror's name and address. The Offeror also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable.

https://assist.dla.mil/ https://assist.dla.mil/ https://assist.dla.mil/feedback mailto:assisthelp@dla.mil

Page | 14

The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Offeror to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Offeror should indicate that it is an offeror for a Government contract when contacting the entity designated at www.sam.gov for establishing the unique entity identifier.

(k) [Reserved]

(l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:

(1) The agency’s evaluation of the significant weak or deficient factors in the debriefed offeror’s offer.

(2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.

(3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.

(4) A summary of the rationale for award;

(5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful offeror.

(6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.

(End of provision) https://www.acquisition.gov/far/part-32#FAR_Subpart_32_11

Page | 15

CLAUSES FOR PURCHASE ORDERS AND BLANKET PURCHASE AGREEMENTS AWARDED BY

OVERSEAS CONTRACTING ACTIVITIES

(Current thru FAC 2023-02, effective 03/2023)

COMMERCIAL ITEMS

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This purchase order or BPA incorporates the following clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address: Acquisition.gov this address is subject to change.

DOSAR clauses may be accessed at: https://acquisition.gov/dosar

FEDERAL ACQUISTION REGULATION (48 CFR CHAPTER 1) CLAUSES:

NUMBER TITLE DATE

52.204-7 SYSTEM FOR AWARD MANAGEMENT

OCT 2018

52.204-9 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR

PERSONNEL

JAN 2011

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE OCT 2018

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE

REPORTING

AUG 2020

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE

MAINTENANCE

AUG 2020

52.204-25

PROHIBITION ON CONTRACTING FOR CERTAIN

TELECOMMUNICATIONS AND VIDEO SURVEILLANCE

SERVICES OR EQUIPMENT

NOV 2021

52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES

MAR 2023

52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL

ITEMS

DEC 2022

52.223-17

AFFIRMATIVE PROCUREMENT OF EPA-DESIGNATED

ITEMS IN SERVICE AND CONSTRUCTION CONTRACTS

AUG 2018

52.225-19

CONTRACTOR PERSONNEL IN A DIPLOMATIC OR

CONSULAR MISSION OUTSIDE THE UNITED STATES

MAY 2020

52.227-19 COMMERCIAL COMPUTER SOFTWARE LICENSE

DEC 2007

https://acquisition.gov/browse/index/far https://acquisition.gov/dosar

Page | 16

52.228-3 WORKERS’COMPENSATION INSURANCE JUL 2014

52.228-4 WORKERS’ COMPENSATION AND WAR-HAZARD

INSURANCE

APR 1984

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL

BUSINESS SUBCONTRACTORS

MAR 2023

52.244-6 SUBCONTRACTS FOR COMMERCIAL ITEMS

MAR 2023

52.246-26 REPORTING NONCONFORMING ITEMS

NOV 2021

THE FOLLOWING CLAUSES ARE PROVIDED IN FULL TEXT:

CYBERSECURITY SUPPLY CHAIN RISK MANAGEMENT REQUIREMENTS (FEB 2023)

(a)Definitions. As used in this clause:

Covered article - The term "covered article" includes- (1)"Information and Communications technology" which means-

(i)any equipment or interconnected system or subsystem of equipment, used in the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information by the executive agency, if the equipment is used by the executive agency directly or is used by a contractor under a contract with the executive agency that requires the use of that equipment, or of that equipment to a significant extent in the performance of a service or the furnishing of a product.

(ii)computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary for security and surveillance), peripheral equipment designed to be controlled by the central processing unit of a computer, software, firmware and similar procedures, services (including support services), and related resources; however, does not include any equipment acquired by a federal contractor incidental to a federal contract.

(2)"Telecommunications Equipment", which means equipment, other than customer premises equipment, used by a carrier to provide telecommunications services, and includes software integral to such equipment (including upgrades).

(3)"Telecommunications Service", which means the offering of telecommunications for a fee directly to the public, or to such classes of users as to be effectively available directly to the public, regardless of the facilities used.

(4)“Cybersecurity Supply Chain Risk”, which means the risk that a person may sabotage, maliciously introduce unwanted function, extract data, or otherwise manipulate the design, Page | 17 integrity, manufacturing, production, distribution, installation, operation, maintenance, disposition, or retirement of covered articles to surveil, deny, disrupt, or otherwise manipulate the function, use, or operation of the covered articles or information stored or transmitted on the covered articles.

(b)Contractor Cybersecurity Supply Chain Risk Management Responsibilities. The Contractor shall take all prudent actions and comply with all Government direction (as identified in paragraph (c)) to regularly identify, assess, monitor, and mitigate cybersecurity supply chain risks when providing covered articles or services affecting covered articles to the Government.

The Contractor shall maintain artifacts that document its compliance with this paragraph and shall provide these artifacts to the Government within 48 hours of request.

(c) Supporting Government Cybersecurity Supply Chain Risk Assessments. The Government may perform a cybersecurity supply chain risk assessment at any time during contract administration to identity, assess, and monitor the cyber risks of the Contractor’s supply chain.

The Contractor agrees that the Government may, at its own discretion, perform on-site assessments to collect information for the cybersecurity supply chain risk assessment. In performing the cybersecurity supply chain risk assessment, the Government may review any information provided by the Contractor, along with any other information available to the Government from public, unclassified, classified, or any other sources. Examples of information that the Government may collect for the cybersecurity supply chain risk assessment includes the following:

1. Functionality and features of covered articles, including access to data and information system privileges.

2. The user environment where a covered article is used or installed.

3. The ability of a source to produce and deliver covered articles as expected.

4. Foreign control of, or influence over, a source or covered article (e.g., foreign ownership, personal and professional ties between a source and any foreign entity or legal regime of any foreign country in which a source is headquartered or conducts operations).

5. Implications to Government mission(s) or assets, national security, homeland security, or critical functions associated with use of a source or covered article.

6. Vulnerability of Federal systems, programs, or facilities.

7. Market alternatives to the covered source.

8. Potential impact or harm caused by the possible loss, damage, or compromise of a product, material, or service to an organization’s operations or mission.

9. Likelihood of a potential impact or harm, or the exploitability of a system.

10. Security standards of the supplier as demonstrated by cooperation with assessments.

11. Security, authenticity, and integrity of covered articles and their supply and compilation chain.

12. Capacity to mitigate risks identified.

13. Factors that could lead to inability of the supplier to provide security updates.

14. Factors that may reflect upon the reliability of other supply chain risk information.

Page | 18

15. Any other considerations that would factor into an analysis of the security, integrity, resilience, quality, trustworthiness, or authenticity of covered articles or sources.

(d) Non-Destructive and Destructive Testing. The Government may engage in non-destructive and/or destructive testing of any information system, equipment, and software to determine whether it will negatively affect the security or performance of a Department of State information system.

(e) Novation Agreement Notice. FAR 42.1203 require Government approval of novation agreements. For proposed novation agreements for this contract, the Contractor shall provide any information requested by the Government regarding the proposed successor’s identity and information regarding its supply chain.

(f) Software Bill of Materials (SBOM) Requests. For software, within 10 business days of request by a Department of State representative, the Contractor shall submit a SBOM to a designated representative. This request may be requested on one (1) or more occasions and shall be delivered at no increase in contract price.

(g) SBOM Sharing Notice. The Contractor consents to the sharing of its SBOM data with other contractors, such as tool solution providers, for the sole purpose of mapping against known vulnerabilities.

(h) Notification procedures for cybersecurity supply chain events. When cybersecurity supply chain events occur, the Contractor must contact the Contracting Officer or his/her designee within 12 hours of the event.

(i) Subcontracts. The Contractor shall insert the substance of this clause in all subcontracts and other contractual instruments in support of this contract.

(j) Vulnerability Exploitability eXchange (VEX). The Contractor is required to notify the Department of any discovered software vulnerabilities within 12 hours. Within three (3) days, they shall provide a report using a VEX format.

(k) Attestation following Major Version Change. Critical Software, as defined by National Institute for Science and Technology (NIST) Guidance, that is provided by the Contractor or subcontractors and is modified during the contract’s period of performance by a major version change (e.g., using a semantic versioning schema of Major.Minor.Patch, the software version number goes from 2.5 to 3.0) requires a new self-attestation. For indefinite delivery contract vehicles, this self-attestation must be provided for all critical software available for ordering on the contract vehicle when the software is modified during the contract vehicle’s ordering period of performance by a major version change. The Contractor shall either (i) post the new attestation in a publicly available internet location within 15 days of the major version change and provide the COR, or Contracting Officer if a COR is not appointed, with the internet link or

Page | 19

(ii) shall contact the COR, or Contracting Officer if a COR is not appointed, and request the agency’s current software self-attestation form and submit it to the Government within 15 days of the major version change. The self-attestation form will contain the following elements: (i) the software producer's name; (ii) a description of which product or products the statement refers to including the number of the major version change; and (iii) a statement attesting that the software producer follows secure development practices and tasks consistent with NIST Guidance.

(End of clause)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

(MAR 2023)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115- 91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR

2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (AUG 1996) ( 31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement https://www.acquisition.gov/far/part-52#FAR_52_203_19 https://www.acquisition.gov/far/part-52#FAR_52_204_23 https://www.acquisition.gov/far/part-52#FAR_52_204_25 https://www.acquisition.gov/far/part-52#FAR_52_209_10 https://www.acquisition.gov/far/part-52#FAR_52_232_40 https://www.govinfo.gov/link/uscode/31/3903 https://www.govinfo.gov/link/uscode/10/3801 https://www.acquisition.gov/far/part-52#FAR_52_233_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_233_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3

Page | 20 provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN

2020), with Alternate I (NOV 2021) ( 41 U.S.C. 4704 and 10 U.S.C. 4655).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) ( 41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN

2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (5) [Reserved].

__ (6) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

__ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

__ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) ( 31 U.S.C. 6101 note).

__ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) ( 41 U.S.C. 2313).

__ (10) [Reserved].

__ (11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) ( 15 U.S.C. 657a).

__ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) ( 15 U.S.C. 657a).

__ (13) [Reserved]

__ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) ( 15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-6.

https://www.acquisition.gov/far/part-52#FAR_52_203_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.govinfo.gov/link/uscode/10/4655 https://www.acquisition.gov/far/part-52#FAR_52_203_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_203_15 https://www.acquisition.gov/far/part-52#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_204_14 https://www.acquisition.gov/far/part-52#FAR_52_204_15 https://www.acquisition.gov/far/part-52#FAR_52_209_6 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_219_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_6 https://www.acquisition.gov/far/part-52#FAR_52_219_6

Page | 21

__ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) ( 15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-7.

__ (16) 52.219-8, Utilization of Small Business Concerns (OCT 2022) ( 15 U.S.C. 637(d)(2) and (3)).

__ (17)(i) 52.219-9, Small Business Subcontracting Plan (OCT 2022) ( 15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (NOV 2016) of 52.219-9.

__ (iii) Alternate II (NOV 2016) of 52.219-9.

__ (iv) Alternate III (JUN 2020) of 52.219-9.

__ (v) Alternate IV (SEP 2021) of 52.219-9.

__ (18)(i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) ( 15 U.S.C. 644(r)).

__ (ii) Alternate I (MAR 2020) of 52.219-13.

__ (19) 52.219-14, Limitations on Subcontracting (OCT 2022) ( 15 U.S.C. 637s).

__ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP

2021) ( 15 U.S.C. 637(d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (OCT

2022) ( 15 U.S.C. 657f).

__ (22)(i) 52.219-28, Post Award Small Business Program Rerepresentation (MAT

2023)( 15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (MAR 2020) of 52.219-28.

__ (23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (OCT 2022) ( 15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (OCT 2022) ( 15 U.S.C. 637(m)).

__ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR

2020) ( 15 U.S.C. 644(r)).

__ (26) 52.219-33, Nonmanufacturer Rule (SEP 2021) ( 15U.S.C. 637(a)(17)).

https://www.acquisition.gov/far/part-52#FAR_52_219_7 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_7 https://www.acquisition.gov/far/part-52#FAR_52_219_8 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_13 https://www.acquisition.gov/far/part-52#FAR_52_219_14 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_16 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_27 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_28 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_28 https://www.acquisition.gov/far/part-52#FAR_52_219_29 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_30 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_32 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec644.htm https://www.acquisition.gov/far/part-52#FAR_52_219_33 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec637.htm

Page | 22

__ (27) 52.222-3, Convict Labor (JUN 2003) (E.O.11755).

_X_ (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (DEC

2022) (E.O.13126).

_X_ (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

_X_ (30)(i) 52.222-26, Equal Opportunity (SEP 2016) (E.O.11246).

__ (ii) Alternate I (FEB 1999) of 52.222-26.

__ (31)(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) ( 38 U.S.C. 4212).

__ (ii) Alternate I (JUL 2014) of 52.222-35.

__ (32)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) ( 29 U.S.C. 793).

__ (ii) Alternate I (JUL 2014) of 52.222-36.

__ (33) 52.222-37, Employment Reports on Veterans (JUN 2020) ( 38 U.S.C. 4212).

__ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC

2010) (E.O. 13496).

_X_ (35)(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) ( 22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (MAR 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O. 13627).

__ (36) 52.222-54, Employment Eligibility Verification (MAY 2022) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

__ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (MAY 2008) of 52.223-9 ( 42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

https://www.acquisition.gov/far/part-52#FAR_52_222_3 https://www.acquisition.gov/far/part-52#FAR_52_222_19 https://www.acquisition.gov/far/part-52#FAR_52_222_21 https://www.acquisition.gov/far/part-52#FAR_52_222_26 https://www.acquisition.gov/far/part-52#FAR_52_222_26 https://www.acquisition.gov/far/part-52#FAR_52_222_35 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_35 https://www.acquisition.gov/far/part-52#FAR_52_222_36 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_36 https://www.acquisition.gov/far/part-52#FAR_52_222_37 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_40 https://www.acquisition.gov/far/part-52#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_222_54 https://www.acquisition.gov/far/part-22#FAR_22_1803 https://www.acquisition.gov/far/part-52#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_223_9 https://www.acquisition.gov/far/part-52#FAR_52_223_11

Page | 23

__ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

__ (40)(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (OCT 2015) of 52.223-13.

__ (41)(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun2014) of 52.223-14.

__ (42) 52.223-15, Energy Efficiency in Energy- Consuming Products (MAY 2020) ( 42 U.S.C. 8259b).

__ (43)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT

2015) (E.O.s 13423 and 13514).

__ (ii) Alternate I (JUN 2014) of 52.223-16.

_X_ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN

2020) (E.O. 13513).

__ (45) 52.223-20, Aerosols…