24315 SCOPE FOR STEYR ENGINE REPAIR WORK.docx

SCOPE OF WORK (SOW)

FOR

Commanding Officer

USCGC ALDER (WLB 216)

1 Yerba Buena Rd San Francisco, CA 94130-1527

PH: 678-520-8133

1. SCOPE:

Contractor provides Certified Steyr Technician, equipment, and facilities to troubleshoot and repair SE164 engine. Replace corroded ECU and engine wiring harness. Replace Mercury throttle controls. Diagnose and repair faulty Blue Sea breaker panel. Return ship boat back to address provided.

2. COMMENCEMENT, PROSECUTION, AND COMPLETION OF WORK: Upon acceptance, the contractor shall commence work by 15MAR2024 and work diligently to complete the entire project and have vessel ready for use NO LATER THAN 01JUL2024.

3. INFORMATION AND REQUIREMENTS:

Physical Characteristics of Vessel

1. Hull Length 24’ 6”

2. Length Overall on trailer 31’ 10”

3. Beam Overall 7’ 11”

4. Highest Points: Fixed on trailer 12’ 0”

Styer SE164 Engine Repair Work

1. Certified Steyr technician shall replace corroded ECU, ECU wiring harness, and throttle controls. Technician shall troubleshoot any additional engine issues.

2. Technician shall diagnose and provide additional estimate for replacement of Blue Sea breaker panel. Replace breaker panel once additional CFR is approved.

3. Technician shall verify proper operation once engine repairs are complete, to include underway sea trials with representative from the Coast Guard. Contractor shall organize and provide CFRs as needed.

4. Contractor will provide return shipping upon repair completed to USCGC Adler. Shipping company utilized shall have means of dropping the trailer with no support from the Coast Guard.

Address as follows:

Commanding Officer

USCGC ALDER (WLB 216)

1 Yerba Buena Rd San Francisco, CA 94130-1527

4. CONDITIONS AFFECTING THE WORK: If additional work items are found, contractor shall report findings immediately before work continues via CFR along with commercial estimate of necessary work to be completed outside the original scope.

5. AFTER AWARD OF THE CONTRACT: The contractor must immediately notify the contracting officer’s representative of intended start date. The work shall be done in accordance with the specification.

6. ORAL MODIFICATION: No oral statement of any person other than the Contracting Officer shall in any manner or degree, modify or otherwise affect the terms of this contract.

7. WORKMANSHIP: All work shall be accomplished with a Certified Steyr Technician and shall be competed satisfactorily to the Contracting Officer Representative (COR).

8. PERMITS: The contractor shall without additional expense to the government, obtain all appointments, licenses, and permits required for the prosecution of the work. The contractor shall comply with all applicable federal, state, and local laws.

9. CLEAN UP: All HAZWASTE, trash and debris shall be removed from the site and or recycled as applicable. The job site shall be left in a clean and neat manner.

10. UPON COMPLETION OF WORK: Contact the COR to arrange for inspection/acceptance of work.

11. POINTS OF CONTACT:

Contracting Officer Representative Jason Hudson, MKC Phone: 443-285-1669 Email: jason.s.hudson@uscg.mil

Scheduling and Quality Assurance Joshua Ancell, MKC Phone: 678-520-8133 Email: joshua.l.ancell1@uscg.mil