23P0016 Award.pdf

SEE ADDENDUM

(No Collect Calls)

X

M6700123Q0024 02-Aug-2023

b. TELEPHONE NUMBER

910-451-7848

8. OFFER DUE DATE/LOCAL TIME

11:00 PM 10 Sep 2023

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

X

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.(808) 778-7202

M670019. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

M6700123P0016 19-Sep-2023

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

PATRICIA QUINONES

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

M501693366709

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

Waymon D. Gardner / Contracting Officer

See Schedule $406,113.00

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS: SEE SCHEDULE

.02-Aug-2023 YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN M6700123Q0024

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE 83XX1 FACILITY

OFFEROR CODE

M67001

MARINE CORPS FIELD CONTRACTING SYS

PO BOX 8368 BLDG 316

CAMP LEJEUNE NC 28547-8368

KOTERO DESIGN LLC

GEORGE A KOTERO

2544 FORGE VILLAGE WAY

APEX NC 27523-6196

DFAS COLUMBUS HQ0871

USMC DAI VENDOR PAY

PO BOX 360922

COLUMBUS OH 43213-9022

18a. PAYMENT WILL BE MADE BY CODE HQ0871

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

M67001CODE

SCD: C

15. DELIVER TO CODE M50169 16. ADMINISTERED BY

Net 30 Days

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

M67001MARINE CORPS FIELD CONTRACTING SYS

PATRICIA QUINONES

PO BOX 8368 BLD 316

CAMP LEJEUNE NC 28546

M50169 MCAS BEAUFORT

JOHN RAMSEY

BUILDING 729, PARKS AV. AND G. ST

MCAS BEAUFORT SC 29904

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

337127

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

X

EMAIL: waymon.gardner@usmc.mil

910-451-1535TEL:

31c. DATE SIGNED

19-Sep-2023

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF60

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 15 Each $565.00 $8,475.00 Pre- Finished Metal Slate

FFP

30 inches W x24 inches D x 66 inches H Pre-finished Metal Slate GrayShelving

Units Heavy Duty Commercial

FOB: Destination

MFR PART NR: Metal Slate

PURCHASE REQUEST NUMBER: M501693366709

PSC CD: 7195

NET AMT $8,475.00

ACRN AA

CIN: M5016933667090001

$8,475.00

0002 14 Each $375.00 $5,250.00 Dry Erase Whiteboard

FFP

5 Foot Dry Erase Whiteboard with Natural Aluminum Frames,Eraser Trays and

Top Cork Tack Rail

FOB: Destination

VENDOR PART NR: Dry Erase Board

NET AMT $5,250.00

CIN: M5016933667090002

$5,250.00

0003 6 Each $450.00 $2,700.00 6 Foot Dry Erase Whiteboard

FFP

6 foot Dry Erase Whiteboard with Natural Aluminum Frames,Eraser Trays and

Top Cork Tack Rail

FOB: Destination

VENDOR PART NR: Dry Erase Board

NET AMT $2,700.00

CIN: M5016933667090003

$2,700.00

0004 4 Each $525.00 $2,100.00 8 foot Dry Erase Whiteboard

FFP

8 Foot Dry Erase Whiteboard with Natural Aluminum Frames,Eraser Trays and

Top Cork Tack Rail

FOB: Destination

VENDOR PART NR: Dry Erase Board

NET AMT $2,100.00

CIN: M5016933667090004

$2,100.00

0005 1 Kit $11,460.00 $11,460.00 Room A102 Stool, High-Hgt, Tlt

FFP

Stool,High-Hgt,Tlt Lim/Ang, Fully Adj Arms,Non-Uphst

Qty 6

30 inches D x 60 inches W x 41 inches H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

Qty 6

NOTE: Provide all hardware and components required to assemble furniture, fixtures, and equipment.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room 102

NET AMT $11,460.00

CIN: M5016933667090005

$11,460.00

0006 1 Kit $2,742.00 $2,742.00 Room A103 ITEM BRAND Work Chai

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 2

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

30 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28

3/8 inches H End Panels.

Qty 1

FOB: Destination

VENDOR PART NR: Room 103

NET AMT $2,742.00

CIN: M5016933667090006

$2,742.00

0007 1 Each $18,750.00 $18,750.00 Room A105

FFP

Pre-finished Metal Pilot Equipment/Gear Lockers 30 inches W x 24 inches D x

78 inches H, Heavy Duty, Commercial.

Qty 15 unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A 105

NET AMT $18,750.00

CIN: M5016933667090007

$18,750.00

0008 1 Kit $15,280.00 $15,280.00 Room A106

FFP

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads.

Qty 8

30 inches D x 60 inches W x 41 inches H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

Commercial

Qty 8

VENDOR PART NR: Room A 106

NET AMT $15,280.00

CIN: M5016933667090008

$15,280.00

0009 1 Kit $5,002.00 $5,002.00 Room A106A

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads.

Qty 2

Side Chair, Hard Casters.

Qty 2

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

24 inches d x 66 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 66 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28

3/8 inches H End Panels

Qty 2 unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room 106A

NET AMT $5,002.00

CIN: M5016933667090009

$5,002.00

0010 1 Kit $13,370.00 $13,370.00 Room A106B

FFP

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads

Qty 7

30 inches D x 60 inches W x 41 inches H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

Qty 7

VENDOR PART NR: Room 106 B

NET AMT $13,370.00

CIN: M5016933667090010

$13,370.00

0011 1 Kit $5,132.00 $5,132.00 Room A107

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 2

Side Chair, Hard Casters.

Qty 2

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

30 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28 unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A107

NET AMT $5,132.00

CIN: M5016933667090011

$5,132.00

0012 1 Kit $11,460.00 $11,460.00 Room A108

FFP

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads Color

Qty 6

30 inches D x 60 inches W x 41 inches H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

Qty 6

VENDOR PART NR: Room A108

CIN: M5016933667090012

0013 1 Kit $8,140.00 $8,140.00 Room A115

FFP

MultiGeneration stacking chair, fixed arms, soft casters

Qty 4

Rectangular 4-Leg Table, 24 inches x 48 inches W x 28.75 inches H, Work Table, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual USB Outlet), and 108 inches Cordset

Qty 4

VENDOR PART NR: Room A 115

NET AMT $8,140.00

CIN: M5016933667090013

$8,140.00

0014 1 Kit $1,910.00 $1,910.00 Room A116

FFP

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads

Qty 1

30"D x 60 inches W x 41 inches H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

VENDOR PART NR: Room A 116

NET AMT $1,910.00

CIN: M5016933667090014

$1,910.00

0015 1 Kit $3,306.00 $3,306.00 Room A117

FFP

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown

Qty 1

Side Chair, Hard Casters

Qty 2

L Shaped Worksurface L1-24 inches D x 4 inches W x 1 1/2 inches T, L2-30 inches D x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x

28 3/8 inches H End Panels

VENDOR PART NR: Room A 117

NET AMT $3,306.00

CIN: M5016933667090015

$3,306.00

0016 1 Kit $6,250.00 $6,250.00 Room A118

FFP

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown

Qty 2

Side Chair, Hard Casters

Qty 2

L Shaped Worksurface L 1-24 inches D x 48 inches W x 1 1/2 inches T, L 2-30 inches D x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x

VENDOR PART NR: Room A 118

NET AMT $6,250.00

CIN: M5016933667090016

$6,250.00

0017 1 Kit $1,848.00 $1,848.00 Room A119

FFP

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder

Adjusts to Counter Height, with No Lumbar, Hard

Casters, Knockdown

VENDOR PART NR: Room A 119

NET AMT $1,848.00

CIN: M5016933667090017

$1,848.00

0018 1 Kit $11,460.00 $11,460.00 Room A120

FFP

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads

Qty 6

30"D x 60 inches W x 41 inches H, Pre-finished Heavy Duty

Commercial Metal Worktable with Butcherblock Worktop, Task Lighting, Electrical Outlets

VENDOR PART NR: Room A 120

CIN: M5016933667090018

0019 1 Kit $6,130.00 $6,130.00 Room A121

FFP

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown

Qty 2

Side Chair, Hard Casters

Qty 2

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-24 inches D x 66 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 66 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x

VENDOR PART NR: Room A 121

NET AMT $6,130.00

CIN: M5016933667090019

$6,130.00

0020 1 Kit $9,560.00 $9,560.00 Room A201

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 4

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-30 inches D x 72 inches W x 1 1/2 inches T with a Grommet Hole, a Pedestal with

Pencil and File Drawer, a 72 inches W x 28 3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28 3/8 inches H End Panels

Qty 4

VENDOR PART NR: Room A 201

NET AMT $9,560.00

CIN: M5016933667090020

$9,560.00

0021 1 Kit $2,566.00 $2,566.00 Room A202

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 1

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inchesT, L2-30 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28 unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A 202

NET AMT $2,566.00

CIN: M5016933667090021

$2,566.00

0022 1 Kit $2,566.00 $2,566.00 Room A203 Work Chair, B Size, FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 1

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

30 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inchesW x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28 unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A 203

NET AMT $2,566.00

CIN: M5016933667090022

$2,566.00

0023 1 Kit $8,844.00 $8,844.00 Room A204

FFP

MultiGeneration stacking chair, fixed arms, soft

Casters

Side Chair, Hard Casters

Rectangular 4-Leg Table, 24 inches D x 48 inches W x 28.75 inches H, Work Table, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual USB Outlet), and 108 inches Chordset unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A 204

NET AMT $8,844.00

CIN: M5016933667090023

$8,844.00

0024 1 Kit $7,631.00 $7,631.00 Room A205

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty1

Side Chair, Hard Casters

Qty 2

Bookcase, Open with 4 Shelves, 15 inches D x 36 inches W x 72-

1/2 inches H, Stepped Base, for 28-3/8 inches planning

Qty 1

Wardrobe Cabinet with Lock, Coat Rod, and Hat

Rack, 20 inches D x 24 inches W x 72 inches H, Desk Height, Right

Hand

Qty 1

Overhead Cabinet, Wall Hung, Hinged Doors, Cubby

Concealed, 1-15 inches D x 30 inches W x 20 inches H and 1- 15 inches D x

48 inches W x 20 inches H for 28-3/8 inches planning.

Qty 1

Classic Desktop 36 inches D x 72 inches W x 1-1/2 inches H with

Adjustable Height Base, Flush Modesty Panel, and

Square Edges

Qty 1

L Shaped Worksurface L1-24 inches D x 54 inches W x 1 1/2 inches T, L2-24 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Back Panel, 2-24 inches W x 28 3/8 inches H L

Qty 1

Tackboard, Wall Hung Tackboard

30"W x 23-1/8 inches H x 1 inches T

Qty 1

Tackboard, Wall Hung Tackboard

48 inches W x 23-1/8 inches H x 1 inches T unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A 205

NET AMT $7,631.00

CIN: M5016933667090024

$7,631.00

0025 1 Kit $7,631.00 $7,631.00 Room A206

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty1

Side Chair, Hard Casters

Qty 2

Bookcase, Open with 4 Shelves, 15 inches D x 36 inches W x 72-

1/2 inches H, Stepped Base, for 28-3/8 inches planning

Qty 1

Wardrobe Cabinet with Lock, Coat Rod, and Hat

Rack, 20 inches D x 24 inches W x 72 inches H, Desk Height, Right

Hand

Qty 1

Overhead Cabinet, Wall Hung, Hinged Doors, Cubby

Concealed, 1-15 inches D x 30 inches W x 20 inches H and 1- 15 inches D x

48 inches W x 20 inches H for 28-3/8 inches planning.

Qty 1

Classic Desktop 36 inches D x 72 inches W x 1-1/2 inches H with

Adjustable Height Base, Flush Modesty Panel, and

Square Edges

Qty 1

L Shaped Worksurface L1-24 inches D x 54 inches W x 1 1/2 inches T, L2-24 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Back Panel, 2-24 inches W x 28 3/8 inches H L

Qty 1

Tackboard, Wall Hung Tackboard

30 inches W x 23-1/8 inches H x 1 inches T

Qty 1

Tackboard, Wall Hung Tackboard unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A 206

CIN: M5016933667090025

0026 1 Kit $7,631.00 $7,631.00 Room A207

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 2

Bookcase, Open with 4 Shelves, 15 inches D x 36 inches W x 72-

1/2 inches H, Stepped Base, for 28-3/8 inches planning

Qty 1

Wardrobe Cabinet with Lock, Coat Rod, and Hat

Rack, 20 inches D x 24 inches W x 72 inches H, Desk Height, Right

Hand

Qty 1

Overhead Cabinet, Wall Hung, Hinged Doors, Cubby

Concealed, 1-15 inches D x 30 inches W x 20 inches H and 1- 15 inches D x

48 inches W x 20 inches H for 28-3/8 inches planning

Qty 1

Classic Desktop 36 inches D x 72 inches W x 1-1/2 inches H with

Adjustable Height Base, Flush Modesty Panel, and

Square Edges

Qty 1

L Shaped Worksurface L1-24 inches D x 54 inches W x 1 1/2 inches T, L2-24 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Back Panel, 2-24 inches W x 28 3/8 inches H L Base

Qty 1

Tackboard, Wall Hung Tackboard

30 inches W x 23-1/8 inches H x 1 inches T

Qty 1

Tackboard, Wall Hung Tackboard unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A207

CIN: M5016933667090026

0027 1 Kit $9,490.00 $9,490.00 Room A208

FFP

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown

Qty 10

Rectangular Table (No Suggestions) X 120 inches W with 2-

Y-Legs and 1-T-Leg unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A208

NET AMT $9,490.00

CIN: M5016933667090027

$9,490.00

0028 1 Kit $12,111.00 $12,111.00 Room A209

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 6

Outline Studio Chair, 15-3/4 inches Seat Height

Qty 2

Soft Side Table with Round Top, 15.7 inches H x 16.1 inches W, Linoleum Top

Qty 1

Bookcase, Open with 4 Shelves, 15 inches D x 36 inches W x 72-

1/2 inches H, Stepped Base, for 28-3/8 inches planning

Qty 1

Wardrobe Cabinet with Lock, Coat Rod, and Hat

Rack, 20 inches D x 24 inches W x 72 inches H, Desk Height, Right

Hand

Qty 1

Round Table, 42 inches D x 28-3/8 Inches H x 1 inches T, with Column

Base, Fixed Height, Laminate Top

Qty 1

Overhead Cabinet, Wall Hung, Hinged Doors, Cubby

Concealed, 1-15 inches D x 30 inches W x 20 inches H and 1- 15 inches D x

48 inches W x 20 inches H for 28-3/8 inches planning

Classic Desktop 36 inches D x 72 inches W x 1-1/2 inches H with

Adjustable Height Base, Flush Modesty Panel, and

Square Edges

Qty 1

L Shaped Worksurface L1-30 inches D x 66 inches W x 1 1/2 inches T, L2-24 inches d x 78 inches W x 1 1/2 inches T with a Grommet Hole, 2-

Pedestal with Pencil and File Drawer, a 78 inches W x 28

3/8 inches H Back Panel, 2 23 inches W x 28 3/8 inches H End Panels, 1-

30 inches W x 28 3/8 inches H L Base

Qty 1

Tackboard, Wall Hung Tackboard

30 inches W x 23-1/8 inches H x 1 inches T

Qty 1

Tackboard, Wall Hung Tackboard

72 inches W x 23-1/8 inches H x 1 inches T

VENDOR PART NR: Room A 209

NET AMT $12,111.00

CIN: M5016933667090028

$12,111.00

0029 1 Kit $12,210.00 $12,210.00 Room A215

FFP

MultiGeneration stacking chair, fixed arms, soft casters

Qty 6

Rectangular 4-Leg Table, 24 inches D x 48 inches W x 28.75 inches H, Work Table, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual USB Outlet), and 108 inches Chordset unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A 215

NET AMT $12,210.00

CIN: M5016933667090029

$12,210.00

0030 1 Kit $1,370.00 $1,370.00 Room A216

FFP

CLIN-0030 (Room A216)

Petal End Table, white petals, Richard Schultz Petal

Collection

Qty 1

Petite Club Chair with Swivel Base, 26 inches W unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A 216

NET AMT $1,370.00

CIN: M5016933667090030

$1,370.00

0031 1 Kit $66,712.00 $66,712.00 Room A217 and A 218

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 9

Side Chair, with arms, sled base, upholstered seat

Qty 4

36 inches Wx39 inches H, Lateral File, 1-13.5 inches receding door with fixed shelf, 1-12 inches drawer with rails, 1-10.5 inches drawer with rails, locks, and Worksurface Top, Dividends style

Qty 1

42 inches Wx39 inches H, Lateral File, 1-13.5 inches receding door with fixed shelf, 1-12 inches drawer with rails, 1-10.5 inches drawer with rails, locks, and Worksurface Top, Dividends style

Qty 2

L Shaped Worksurface L1-24 inches D x 60 inches W x 1 1/2 inches T, L2-24 inches d x 60 inches W x 1 1/2 inches T with a Grommet Hole, 2-

Pedestal with Pencil and File Drawer, a 78 inches W x 28

3/8 inches H Back Panel, 2 23 inches W x 28 3/8 inches H End Panels, 1-

30 inches W x 28 3/8 inches H L Base

Qty 16

24 inches W x 50 inches H Preconfigured Panel, Topway, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2

Qty 8

30 inches W x 50 inches H Preconfigured Panel, Topway, Monolithic/Monolithic, Frosted Glass/Fabric to

Raceway Side 1 & 2

Qty 8

60 inches W x 50 inches H Preconfigured Panel, Topway, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2, 2-Quad Power Outlets, and Power Connectors to

Power Above Ceiling

Qty 16

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

30 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28

VENDOR PART NR: Room A 217 and A 218

NET AMT $66,712.00

CIN: M5016933667090031

$66,712.00

0032 1 Kit $67,288.00 $67,288.00 Room A220

FFP

Work Chair, B Size, Std-Hgt Range Adj, Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Arm pads

Qty 8

42 inches W x 27 inches H, Lateral File, drawer with rails, and locks

Qty 2

42 inches W x 39 inches H, Lateral File, 1-13.5 inches receding door with fixed shelf, 1-12 inches drawer with rails, 1-10.5 inches drawer with rails, and locks

Qty 1

42 inches W x 18 inches D Calibri Front Lateral File Worksurface Top, Dividends style Knoll Calibri or Equal

Qty 3

L Shaped Worksurface L1-24 inches D x 60 inches W x 1 1/2 inches T, L2-

24 inches D x 60 inches W x 1 1/2 inches T with a Grommet Hole, 2-Pedestal with Pencil and File Drawer, a 78 inches W x 28 3/8 inches H Back

Panel, 2 23 inches W x 28 3/8 inches H End Panels, 1-30 inches W x 28 3/8 inches

H

Qty 16

24 inches W x 50 inches H Preconfigured Panel, Top way, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2.

Qty 8

30 inches W x 50 inches H Preconfigured Gallery Panel, Top way, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2.

Qty 8

60 inches W x 50 inches H Preconfigured Panel, Top way, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2, 2-

Quad Power Outlets, and Power Connectors to Power

Above Ceiling.

Qty 16 unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A 220

NET AMT $67,288.00

CIN: M5016933667090032

$67,288.00

0033 1 Kit $4,650.00 $4,650.00 Room A221

FFP

Work Chair, B Size, Std-Hgt Range Adj, Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Arm pads.

Qty 2

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

30 inches D x 66 inches W x 1 1/2 inches T with a Grommet Hole, a Pedestal with Pencil and File Drawer, a 72 inches W x 28 3/8 inches H Modesty

Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28 3/8 inches H End Panels.

unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A221

NET AMT $4,650.00

CIN: M5016933667090033

$4,650.00

0034 1 Kit $5,002.00 $5,002.00 Room A 222

FFP

Work Chair, B Size, Std-Hgt Range Adj, Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Arm pads.

Qty 2

Side Chair, with arms, sled base, upholstered seat

Qty 2

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

30 inches D x 66 inches W x 1 1/2 inches T with a Grommet Hole, a Pedestal with Pencil and File Drawer, a 72 inches W x 28 3/8 inches H Modesty

Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28 3/8 inches H End Panels.

VENDOR PART NR: Room A 222

NET AMT $5,002.00

CIN: M5016933667090034

$5,002.00

0035 1 Kit $5,600.00 $5,600.00 Room A224

FFP

Outline Studio Chair, 15-3/4 inches Seat Height.

Qty 2

Outline Studio 3 Seat Sofa 15-3/4 inches Seat Height.

Qty 1

Soft Side Table with Round Top, 15.7 inches H x 16.1 inches W, Linoleum Top unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

VENDOR PART NR: Room A 224

NET AMT $5,600.00

CIN: M5016933667090035

$5,600.00

0036 1 Kit $5,916.00 $5,916.00 Room A225

FFP

Work Chair, Flex Back Net Task Chair, Height Adjustable

Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown.

Qty 4

Rectangle with one rounded end 4-Leg Table, 42 inches D x

72 inches W x 28.75 inches H, Worktable, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual

USB Outlet), and 108 inches Chord set.

VENDOR PART NR: Room A 225

NET AMT $5,916.00

CIN: M5016933667090036

$5,916.00

0037 1 Each $10,320.00 $10,320.00 Freight

FFP

Freight

FOB: Destination

VENDOR PART NR: Freight

NET AMT $10,320.00

CIN: M5016933667090037

$10,320.00

0038 1 Each $18,250.00 $18,250.00 Installation

FFP

Installation Services

FOB: Destination

VENDOR PART NR: Installation

NET AMT $18,250.00

CIN: M5016933667090038

$18,250.00

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

0002 Destination Government Destination Government

0003 Destination Government Destination Government

0004 Destination Government Destination Government

0005 Destination Government Destination Government

0006 Destination Government Destination Government

0007 Destination Government Destination Government

0008 Destination Government Destination Government

0009 Destination Government Destination Government

0010 Destination Government Destination Government

0011 Destination Government Destination Government

0012 Destination Government Destination Government

0013 Destination Government Destination Government

0014 Destination Government Destination Government

0015 Destination Government Destination Government

0016 Destination Government Destination Government

0017 Destination Government Destination Government

0018 Destination Government Destination Government

0019 Destination Government Destination Government

0020 Destination Government Destination Government

0021 Destination Government Destination Government

0022 Destination Government Destination Government

0023 Destination Government Destination Government

0024 Destination Government Destination Government

0025 Destination Government Destination Government

0026 Destination Government Destination Government

0027 Destination Government Destination Government

0028 Destination Government Destination Government

0029 Destination Government Destination Government

0030 Destination Government Destination Government

0031 Destination Government Destination Government

0032 Destination Government Destination Government

0033 Destination Government Destination Government

0034 Destination Government Destination Government

0035 Destination Government Destination Government

0036 Destination Government Destination Government

0037 Destination Government Destination Government

0038 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 31-OCT-2023 15 M50169 MCAS BEAUFORT

JOHN RAMSEY

BUILDING 729, PARKS AV. AND G. ST

MCAS BEAUFORT SC 29904

843-228-7906

M50169

0002 31-OCT-2023 14 (SAME AS PREVIOUS LOCATION)

0003 31-OCT-2023 6 (SAME AS PREVIOUS LOCATION)

0004 31-OCT-2023 4 (SAME AS PREVIOUS LOCATION)

0005 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0006 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0007 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0008 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0009 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0010 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0011 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0012 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0013 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0014 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0015 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0016 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0017 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0018 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0019 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0020 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0021 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0022 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0023 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0024 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0025 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0026 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0027 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0028 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0029 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0030 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0031 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0032 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0033 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0034 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0035 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0036 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0037 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0038 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

ACCOUNTING AND APPROPRIATION DATA

AA:

^^^017^2023^2023^^1106^000^^310^D^BSS1^^^^^0000^00008522^044320^M67358^M50169.M02205_MC^M40169_23S1_00CMP2_COLEQP^

M50169_630498NCQ^310.20 Furnitur^^^

AMOUNT: $406,113.00

ACRN CLIN/SLIN CIN AMOUNT

AA 0001 M5016933667090001 $8,475.00

0002 M5016933667090002 $5,250.00

0003 M5016933667090003 $2,700.00

0004 M5016933667090004 $2,100.00

0005 M5016933667090005 $11,460.00

0006 M5016933667090006 $2,742.00

0007 M5016933667090007 $18,750.00

0008 M5016933667090008 $15,280.00

0009 M5016933667090009 $5,002.00

0010 M5016933667090010 $13,370.00

0011 M5016933667090011 $5,132.00

0012 M5016933667090012 $11,460.00

0013 M5016933667090013 $8,140.00

0014 M5016933667090014 $1,910.00

0015 M5016933667090015 $3,306.00

0016 M5016933667090016 $6,250.00

0017 M5016933667090017 $1,848.00

0018 M5016933667090018 $11,460.00

0019 M5016933667090019 $6,130.00

0020 M5016933667090020 $9,560.00

0021 M5016933667090021 $2,566.00

0022 M5016933667090022 $2,566.00

0023 M5016933667090023 $8,844.00

0024 M5016933667090024 $7,631.00

0025 M5016933667090025 $7,631.00

0026 M5016933667090026 $7,631.00

0027 M5016933667090027 $9,490.00

0028 M5016933667090028 $12,111.00

0029 M5016933667090029 $12,210.00

0030 M5016933667090030 $1,370.00

0031 M5016933667090031 $66,712.00

0032 M5016933667090032 $67,288.00

0033 M5016933667090033 $4,650.00

0034 M5016933667090034 $5,002.00

0035 M5016933667090035 $5,600.00

0036 M5016933667090036 $5,916.00

0037 M5016933667090037 $10,320.00

0038 M5016933667090038 $18,250.00

PERFORMANCE WORK STATEMENT

FURNITURE PACKAGE FOR HANGAR

BUILDING 729

AT MCAS BEAUFORT, SC

1.0 BACKGROUND. This is an acquisition for Furniture for Hangar 729 Admin to include the delivery of new furniture. Items shall be delivered and installed at the designated building aboard

Marine Corps Air Station (MCAS) Beaufort, South Carolina.

2.0 REQUIREMENT. The contractor shall provide all personnel, supervision, supplies, materials, equipment, tools, and transportation necessary to provide furniture including assembly and installation, in accordance with the performance work statement (PWS).

3.0 LOCATION. Building 729, Parks Av. and G. St., MCAS Beaufort, South

Carolina. The building has two floors, single door access at each end and two stairwells for access to the second floor. There are NO elevators/lifts.

If building is to be OCCUPIED prior to/or during the installation of the items, a Base Property representative will provide notice to Contracting Office and the Contractor shall conduct the installation in such a manner to prevent displacement of occupants. The Contractor will be required to deliver and install the items as well as remove and dispose of all packaging and installation debris.

4.0 TASKS

4.1 PRE-INSTALLATION. The contractor shall arrange pre-installation meeting(s) with

Base Property and Public Works (Government) representative within ten (10) business days of contractor award. Purpose of this meeting is to coordinate conduct of delivery/installation schedules. Points of Contact are:

Base Property: Mrs. Brenda

Shelton

Phone: (843) 228-6081

Email:brenda.shelton@usm c.mil

Public Works Representative: Mr. John Ramsey

Phone: (843) 228-7906

Email: john.ramsey@usmc.mil

Operating Hours: Normal operating hours are 7:00 AM EST – 3:30 PM EST, Monday through Friday. Closed on weekends and Federal Holidays.

mailto:brenda.shelton@usmc.mil mailto:brenda.shelton@usmc.mil

4.2 DELIVERY. Delivery shall be coordinated with the Base Property representative. A delivery notification shall be provided at a minimum of one week prior to delivery/installation. The projected date for delivery is estimated for the week of October 30, 2023 and may be adjusted for new delivery date. The contractor shall provide a Project Manager to be on site throughout the entire project. The Project Manager shall have authority to represent the company to coordinate all services and issues through the Contracting and Base

Property Offices. All work will be conducted during the normal operation hours.

Deliver all Furniture directly to the required building at the time of installation. If required, forklift(s), temporary on-site storage containers, trailers, and/or vehicles may be set up in the vicinity of the buildings, with locations as directed by the Government Representative. Cost of forklift and above storage means to include properly locking is the full responsibility of the contractor. No Government owned forklifts, warehousing, or storage facilities will be provided.

4.3 INSTALLATION. Installation of Furniture Items shall be coordinated with Base Property (Government) representative and in accordance with floor plans (provided at Pre-installation meeting if not received by contract award):

Hallway, door frames, flooring, and individual rooms shall be protected with some form of padding. Items need to be installed and set-up as functionally designed.

Notify the Base Property (Government) representative if any items are found inoperable/damaged; items that need replacement will be at no additional expense to the Government.

Deviations or modifications from the Equipment List will be conducted via bilateral modification by the

Contracting Officer only. Proper approvals from the Base Property and Military Housing will be obtained for any deviations or modifications.

4.4 JOB SITE. The contractor shall be responsible for cleaning the installation area and disposing of all trash and materials to the satisfaction of the Government’s representative or designated inspectors before completion of each workday and upon completion of the project. At the end of the project, the contractor shall restore any disturbed or damaged areas at the direction of the Contracting Officer.

4.5 REMOVAL. Contractor is responsible for removal of all packing materials and debris from delivery and installation to include drill dust and foot traffic (e.g., dirt, sand, mud, grass, water). The contractor will be required to clean-up/remove from items all plastics, tape, cardboard packaging, zip ties, Styrofoam, etc. and properly dispose of materials and debris.

4.6 DISPOSAL. Once a day (maximum), debris may be taken to the Materials Recycling Facility/ Landfill located on Itami Ave. Materials must be sorted as cardboard, plastic and wood. Driver must have a copy of the contract and placard provided by Base Property representative to enter the site.

4.7 WARRANTY. The contractor shall warrant all equipment and labor for a period of not less than one year.

The contractor shall provide all warranty information and documents at the time of delivery to include information and documentation for any manufacturer’s warranty.

5.0 FACILITY DAMAGE. Contractor shall be responsible for all damages to building and/or surrounding areas

(including lawns) when moving or installing furniture. Damages shall be repaired by contractor at contractor’s expense before final invoicing.

6.0 PARKING/EQUIPMENT. Parking of equipment and vehicles will be in designated areas or in authorized parking lots (normally not on the grass or lawn). The Government assumes no responsibility for vehicles or containers.

Contractor shall provide all necessary material handling equipment and tools required to support this requirement to include non-marking, rubber-wheeled hand trucks, dollies, and carts. Contractor shall be responsible for securing all material handling equipment. The Government will not be liable for any stolen or damaged property that is left unsecured by the contractor.

7.0 RESPONSIBILITY. The Government will not be responsible in any way for the Contractor's personal supplies, equipment, materials, or belongings brought onto the grounds to perform services. This includes but is not limited to loss or damage caused by fire, theft, hurricane, accident or other disaster.

8.0 CONTRACTOR UNAUTHORIZED WORK PERFORMANCE. The Contractor shall not perform work that deviates from contract requirements and specifications. If the Contractor deviates from contract requirements and specifications without approval of the CONTRACTING OFFICER, such deviation shall be at the risk of the Contractor and any cost related thereto shall be borne by the Contractor.

TRANSITION AND KICKOFF MEETING. The Contractor shall attend a phone conference transition

Meeting to discuss the award contract specification, deliverable, and installation time line for

Each room.

The technical point of contact and the award winning vendor shall attend this meeting within two weeks

After the contract is awarded.

9.0 BASE ACCESS INSTRUCTIONS FOR MARINE CORPS AIR STATION BEAUFORT

-Contractors and/or Delivery drivers must have in their possession: their contract number, delivery address, and sponsor’s contact information to gain initial access to the base. For supply and installation the technical point of contact is the sponsor, for supply deliveries the customer/delivery point of contact is the sponsor.

Contract Number: M67001XXXXXXX

Sponsor/Technical POC: John Ramsey

Phone Number: 843-228-7906

Delivery Address: Station Supply

(Attn. Jessica Hoffman M20361)

Bldg. 612, Bay 14 Itami Ave.

MCAS Beaufort, SC, 29904

M6700123P0016

- Contractors must be registered in the Defense Biometrics Identification System (DBIDS). It is the Contractor’s responsibility to ensure all their employees and or subcontractors are properly registered within DBIDS.

- DBIDS credentials will be valid for the duration of your contract, not to exceed one year;

however, re-vetting of individuals' information will occur each year.

- Contractors requiring access for over 60 days will receive a credential valid for up to one year.

- Contractors requiring access for less than 60 days will receive a temporary paper pass.

- Contractor Common Access Card (CAC) Eligibility: Contractor personnel authorized CAC's are exempt from DBIDS enrollment.

- If you have questions regarding base access, Contractor CAC or DBIDS requirements contact the

Contractor Vetting Office at 910-451-0283/0284/0285.

**The Government will not be responsible for any contractor access delays. Delays that may result from inadequate planning are strictly the responsibility of the contractor.

10. Performance Requirements Summary (PRS)

Quality Assurance Surveillance Plan (QSAP)/Performance Requirement Summary (PRS). The QASP has been developed to provide the standard of surveillance for monitoring the contract delivery and installation.

The performance standards for this Performance Work Statement (PWS) are 98% Acceptable Quality Levels

(AQLs) on completed work inspected by the Government. The furniture shall be delivered and installed with no damage. The contractor shall provide rework and corrective actions for all unacceptable completed work not meeting the 98% AQLs.

Objective Standard

Location

Acceptable

Quality Level

(AQL)

Standard

Inspector Inspection Type and Frequency

Incentive

Delivery In accordance with PWS

-95%

-Timeliness

-Quality

-Accuracy

John

Ramsey

Station

Architect

(843)

228-7906 x Observation

Random

Monitoring

Invoice payment

Installation In accordance with PWS

-95%

-Timeliness

-Quality

-Accuracy

John

Ramsey

Station

Architect

(843)

Observation x Random

Quality and

Damage

In accordance with PWS

-Timeliness

-Quality

-Accuracy

John

Ramsey

Station

Architect

(843)

Observation x Random

See Salient Characteristics in details as attached below.

CLAUSES INCORPORATED BY REFERENCE

52.202-1 Definitions JUN 2020

52.203-3 Gratuities APR 1984

52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

JUN 2020

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber

Content Paper

MAY 2011

52.204-13 System for Award Management Maintenance OCT 2018

52.204-18 Commercial and Government Entity Code Maintenance AUG 2020

52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.211-17 Delivery of Excess Quantities SEP 1989

52.212-4 Contract Terms and Conditions--Commercial Products and

Commercial Services

DEC 2022

52.232-17 Interest MAY 2014

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

MAR 2023

52.233-1 Alt I Disputes (May 2014) - Alternate I DEC 1991

52.242-13 Bankruptcy JUL 1995

52.247-34 F.O.B. Destination NOV 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

JAN 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

JAN 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services

JAN 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements JAN 2023

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of

Terrorism

MAY 2019

252.223-7998 (Dev) Prohibition on Procurement of Certain Items Containing

Perfluorooctane Sulfonate or Perfluorooctanoic Acid

(DEVIATION 2022-O0010)

SEP 2022

252.225-7001 Buy American And Balance Of Payments Program--Basic JAN 2023

252.225-7002 Qualifying Country Sources As Subcontractors MAR 2022

252.225-7048 Export-Controlled Items JUN 2013

252.225-7052 Restriction on the Acquisition of Certain Magnets, Tantalum, and Tungsten.

JAN 2023

252.225-7056 Prohibition Regarding Business Operations with the Maduro

Regime

JAN 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang

Uyghur Autonomous Region

JUN 2023

252.225-7968 (Dev) Restriction on Acquisition of Personal Protective Equipment and Certain Other Items from Non-Allied Foreign Nations.

(DEVIATION 2022-O0008)

MAR 2022

252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic

Enterprises, and Native Hawaiian Small Business Concerns

JAN 2023

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006

252.237-7010 Prohibition on Interrogation of Detainees by Contractor

Personnel

JAN 2023

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.243-7002 Requests for Equitable Adjustment DEC 2022

252.244-7000 Subcontracts for Commercial Products or Commercial

Services

JAN 2023

252.247-7023 Transportation of Supplies by Sea JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (JUN 2023)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by

Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or

Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and

10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19

U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

__X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV

2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN

2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment

Act of 2009.)

__X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L.

109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub.

L. 111-117, section 743 of Div. C).

__X_ (8) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of

Pub. L. 117-328).

__X_ (9) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

___ (10) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41

U.S.C. 2313).

____ (11) [Reserved]

____ (12) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) (15 U.S.C. 657a).

_X___ (13) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (14) [Reserved]

____ (15)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-6.

____ (16)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

____ (17) 52.219-8, Utilization of Small Business Concerns (OCT 2022) (15 U.S.C. 637(d)(2) and (3)).

____ (18)(i) 52.219-9, Small Business Subcontracting Plan (OCT 2022) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (JUN 2020) of 52.219-9.

____ (v) Alternate IV (SEP 2021) of 52.219-9.

____ (19) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (ii) Alternate I (MAR 2020) of 52.219-13.

____ (20) 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 657s).

____ (21) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

____ (22) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (OCT 2022) (15 U.S.C.

657f).

__X__ (23) (i) 52.219-28, Post-Award Small Business Program Rerepresentation (MAR 2023) (15 U.S.C.

632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (24) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-

Owned Small Business Concerns (OCT 2022) (15 U.S.C. 637(m)).

____ (25) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns

Eligible Under the Women-Owned Small Business Program (OCT 2022) (15 U.S.C. 637(m)).

____ (26) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

____ (27) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

__X__ (28) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

____ (29) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (DEC 2022) (E.O. 13126).

__X__ (30) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

__X__ (31)(i) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

____ (ii) Alternate I (FEB 1999) of 52.222-26.

__X__ (32)(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

____ (ii) Alternate I (JUL 2014) of 52.222-35.

__X__ (33)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

____ (ii) Alternate I (JUL 2014) of 52.222-36.