22Q0082 Attachment I - Snow Plow Specs.docx

Specification Sheet for New Snow Plow Purchase

1. Scope This specification defines the minimum requirements for two new snowplows requested by Tobyhanna Roads and Grounds to supplement their snow removal equipment.

2. Requirements: The snow plows shall consists of the following features and capabilities as a minimum:

A. The brand name or equal to - Metal Pless Maxxpro (PRO1048-22LE) This plow needs to meet the necessary requirements to be mounted on a New Holland W190B Loader with the JRB coupler shown in attachment II.

· 10’ plow with 6’ hydraulic wings on both sides (total of 22’)

· Wings must be controlled by hydraulic cylinders and not actuators

· Must be ordered with a series 418 JRB Coupler that is required to mount the plow to an existing front-end loader.

· 4’ plow height

· Live Edge trip system with 2’ individual trip edges

· Built using heavy duty CHT400 abrasion resistant steel

· Carbide cutting edge on main moldboard.

· Self-leveling skid shoes on the wings

· Lateral floating of the blade

· Curb runners

· Baked powder paint.

· Approximate weight is 5200 lbs.

B. The brand name or equal to - Metal Pless LiveBoxx (LBX1648)

· 16’ plow with bolt on fixed side wings

· Wings have self-leveling abrasion shoes.

· Heavy duty braces bolted to the moldboard and to the side wings

· Carbide cutting edge on main moldboard.

· 4’ plow height

· Live Edge trip system with 2’ individual trip edges.

· Built using heavy duty CHT400 abrasion resistant steel.

· Lateral floating of the blade.

· Baked powder paint.

· Approximate weight is 3545 lbs.