22ITBC074A-JWT ADDENDUM NO. 1

INVITATION TO BID – COMMODITIES 22ITBC074A-JWT

CORPORATION STOPS AND BRASS FITTINGS

For

DEPARTMENT OF PUBLIC WORKS

BID ISSUANCE DATE: Friday, October 21, 2022 BID DUE DATE AND TIME: November 21, 2022 @ 11:00A.M., local time PURCHASING CONTACT: Janelle Tanner at 404-612-7969 E-MAIL: janelle.tanner@fultoncountyga.gov

FULTON COUNTY GOVERNMENT

DEPARTMENT OF PURCHASING & CONTRACT COMPLIANCE

130 PEACHTREE STREET, S.W., SUITE 1168

ATLANTA, GA 30303

mailto:janelle.tanner@fultoncountyga.gov

TABLE OF CONTENTS

TOC -1

INVITATION TO BID

Section 1 - INSTRUCTIONS TO BIDDERS, GENERAL TERMS AND CONDITIONS

1. Bid Preparation

2. Receipt and Opening of Bids

3. Certification of Independent Price Determination

4. Term of Contract

5. Examination of Contract Documents

6. Addenda and Interpretations

7. Non-Collusion

8. Certificate of Acceptance for Bid Requirements

9. Conflict of Interest

10. Bid Evaluation

11. Award Criteria

12. Disqualification of Bidders

13. Basis of Award

14. Samples

15. New

16. Brand Name Specifications and Approved Equivalents

17. Insurance and Risk Management Provisions

18. Indemnification

19. Taxes

20. Delivery

21. Placement of Orders

22. Rights and Remedies of County for Default

23. Invoices and Payment Terms

24. Legal Requirements

25. Assignment

26. Rejection of Bid

27. Termination

28. Debarment

29. Right to Protest

30. Binding Authority

31. Intergovernmental Cooperative Procurement Statement

32. Submittals

Section 2 - BID FORM

Section 3 – CONTRACT COMPLIANCE REQUIREMENTS

Section 4 – SCOPE OF WORK AND TECHNICAL SPECIFICATIONS

22ITBC074A-JWT, Corporation Stops and Brass Fittings

INVITATION TO BID - COMMODITY

22ITBC074A-JWT, CORPORATION STOPS AND BRASS FITTINGS

Fulton County Government “County” is soliciting Bids for the procurement of Corporation Stops and Brass Fittings for the Department of Public Works. Bid responses, with required attachments, must be submitted electronically on-line no later than 11:00 a.m., local time, on Monday, November 21, 2022.

PURPOSE AND SCOPE

The purpose of this Invitation to Bid – Commodity (“ITBC”) is to establish an indefinite quantity, firm fixed price contract to be used as the primary source for the commodities/goods listed in the attached specifications. Commodities will be ordered from time to time in such quantity as may be needed to fill any requirements of the County. As it is impossible to determine the precise quantities that may be needed during the contract period, the Vendor is obligated to deliver in minimum/maximum quantities contracted for in accordance with the specific conditions of this bid.

METHOD OF SOURCE SELECTION

This procurement is being conducted in accordance with all applicable provisions of the Fulton County Code of Ordinances and the specific method of source selection for the services required in this bid is Code Section 102-373, Competitive Sealed Bid.

BID DOCUMENTS

In order to obtain complete information about this solicitation, please click the link below where this document and supporting documents can be downloaded, https://www.bidnetdirect.com/georgia/fultoncounty.

PURCHASING CONTACT

Information regarding the bid or bid requirements, either procedural or technical, may be obtained by submitting questions to:

Purchasing Contact Name: Janelle Tanner, Assistant Purchasing Agent Email: janelle.tanner@fultoncountyga.gov Phone: 404-612-7969

PRE-BID CONFERENCE

No Pre-Bid Conference will be held. Inquiries regarding the solicitation either technical or otherwise must be submitted in BidNet Direct prior to the Due Date. All responses to questions will be distributed as an Addendum to this ITBC and posted on the BidNet Direct website.

https://www.bidnetdirect.com/georgia/fultoncounty mailto:janelle.tanner@fultoncountyga.gov

VENDOR REGISTRATION

Bid responses must be submitted electronically on-line through BidNet Direct. The Bidder’s firm must be a registered vendor with BidNet Direct at https://www.bidnetdirect.com/georgia/fultoncounty in order to submit a response to this ITBC. There is no charge to register, simply follow the registration path and select the "Limited Access" option.

If you need any assistance registering or using the platform, please call BidNet's Support Team at 800-835-4603 ext. 2 for assistance.

END OF SECTION

https://www.bidnetdirect.com/georgia/fultoncounty

SECTION 1

INSTRUCTIONS TO BIDDERS, GENERAL TERMS AND CONDITIONS

The following provisions are hereby made a part of this Invitation to Bid - Commodities

(ITBC).

Any Contract or Purchase Order awarded as the result of this request shall be governed by these General Terms and Conditions.

1. BID PREPARATION

a. Bid responses must be submitted electronically on-line via BidNet Direct

(https://www.bidnetdirect.com/georgia/fultoncounty).

b. Unit prices must be entered in the appropriate spaces provided. The unit price for each unit shall include packing, unless otherwise specified.

c. The County may, in its sole discretion, reject any bid determined as irregular, a conditional bid or any bid on which there is an alteration of, or departure from the Bid Schedule attached.

d. The County reserves the right to award multiple contracts for the procurement of annual contracts for goods and commodities.

2. RECIEPT AND OPENING OF BIDS

Sealed bids will be received by the Department of Purchasing & Contract Compliance electronically via BidNet Direct as described above. All submitted bid responses will be time and date stamped at the time all documents are uploaded and received.

REQUIRED SUBMITTALS: The bidder must complete and execute the following documents and upload as required:

1. Acknowledgement of each Addendum

2. Contract Compliance Forms

i. Exhibit A: Promise of Non-Discrimination

Any bid responses received after the stated time and date will not be considered. It shall be the sole responsibility of the bidder to have his/her bid submitted in BidNet Direct to the County for receipt on or before the stated time and date.

Bids shall be publicly opened via web conferencing, with only the names and total bid price of the bidders disclosed at the opening.

Date: Monday November 21, 2022

Time: 11:00A.M.

Web Conference Link: Join Zoom Meeting https://zoom.us/j/99138301632

Meeting ID: 991 3830 1632 One tap mobile +14702509358,,99138301632# US (Atlanta) +14703812552,,99138301632# US (Atlanta)

Dial by your location +1 470 250 9358 US (Atlanta) +1 470 381 2552 US (Atlanta) +1 301 715 8592 US (Washington DC) +1 312 626 6799 US (Chicago) +1 646 518 9805 US (New York) +1 646 558 8656 US (New York) +1 651 372 8299 US (Minnesota) +1 786 635 1003 US (Miami) +1 267 831 0333 US (Philadelphia) +1 206 337 9723 US (Seattle) +1 213 338 8477 US (Los Angeles) +1 253 215 8782 US (Tacoma) +1 346 248 7799 US (Houston) +1 602 753 0140 US (Phoenix) +1 669 219 2599 US (San Jose) +1 669 900 9128 US (San Jose) +1 720 928 9299 US (Denver) +1 971 247 1195 US (Portland)

3. CERTIFICATION OF INDEPENDENT PRICE DETERMINATION

By submission of this Bid, the Bidder certifies, and in the case of joint bid each party thereto certifies as to its own organization, that in connection with this procurement:

(1) The prices in this Bid have been arrived at independently, without consultation, communication, or agreement, for the purpose of restricting competition, as to any matter relating to such prices with any other bidder or with any competitor;

(2) Unless otherwise required by law, the prices which have been quoted in this Bid have not been knowingly disclosed by the Bidder and will not knowingly be disclosed by the Bidder prior to the opening, directly or indirectly to any other Bidder or to any competitor; and https://zoom.us/j/99138301632

(3) No attempt has been made or will be made by the Bidder to induce any other person or firm to submit or not to submit a bid for the purpose of restricting competition.

4. MULTI-YEAR CONTRACT TERM

The contract term shall be as defined below. The County is obligated only to pay such compensation under the contract as may lawfully be made from funds budgeted and appropriated for that purpose during the County’s then current fiscal year.

a. Commencement Term

The effective date of the Purchase Order shall begin the 1st day of January 2023 and shall end absolutely and without further obligation on the part of the County on the 31st day of December 2023. The Commencement Term shall be subject to events of termination and the County’s termination rights that are described elsewhere in this Agreement. Notwithstanding anything contained in this Agreement, the County’s obligation to make payments provided under this Agreement shall be subject to the County’s annual appropriations of funds for the goods, services, materials, property and/or supplies procured under this Agreement by the County’s governing body and such obligation shall not constitute a pledge of the County’s full faith and credit within the meaning of any constitutional debt limitation.

b. Renewal Terms

Unless the terms of this Agreement are fulfilled with no further obligation of the part of either party on or before the final date of the Commencement Term as stated above, or unless an event of termination as defined within this Agreement occurs during the Commencement Term, this Agreement may be renewed at the written option of the County upon the approval of the County Board of Commissioners for two (2) one-year (“Renewal Terms”). However, no Renewal Term of this Agreement shall be authorized, nor shall any Renewal Term of this Agreement commence unless and until each Renewal Term has first been approved in writing by the County Board of Commissioners for the calendar year of such Renewal Term. If approved by the County Board of Commissioners, the First Renewal Term shall begin on the 1st day of January 2024 and shall end no later than the 31st day of December 2024. If approved by the County Board of Commissioners, the Second Renewal Term shall begin on the 1st day of January 2025 and shall end no later than the 31st day of December 2025. If the County chooses not to exercise any Renewal Term as provided in this Section, then the Term of this Agreement then in effect shall also be deemed the “Ending Term” with no further obligation on the party of either party.

c. Term Subject to Events of Termination

All “Terms” as defined within this Section are subject to the section of this Agreement which pertain to events of termination and the County’s rights upon termination.

d. Same Terms

Unless mutually agreed upon in writing by the parties, or otherwise indicated herein, all provisions and conditions of any Renewal Term shall be exactly the same as those contained within in this Agreement.

e. Statutory Compliance Regarding Purchase Contracts.

The parties intend that this Agreement shall, and this Agreement shall operate in conformity with and not in contravention of the requirements of O.C.G.A. § 36-60-13, as applicable, and in the event that this Agreement would conflict therewith, then this Agreement shall be interpreted and implemented in a manner consistent with such statute.

5. EXAMINATION OF CONTRACT DOCUMENTS

Prospective bidders shall examine the contract documents and before submitting a bid, shall make a written request to the County for an interpretation or correction of any ambiguity, in consistency or error therein which could be discovered by a bidder. At the bid opening each bidder shall be presumed to have read and be familiar with the contract documents.

6. ADDENDA AND INTERPRETATIONS

Bidders may submit requests for clarification or questions regarding this ITBC to the Purchasing Contact Person. Any request shall be submitted in writing via Facsimile or Email. All responses to written request(s) will be distributed as an Addendum to this ITBC and posted on the County’s website at www.fultoncountyga.gov under “Bid Opportunities.

The County will not respond to requests received after Monday, November 14, 2022, at 2:00 P.M.

7. NON-COLLUSION

By submitting a Bid, the Bidder certifies that this bid is made without prior understanding, agreement or connection with any other corporation, firm or person submitting a bid for the same work, labor or service to be done or the supplies, materials or equipment to be furnished and is in all respects fair and without collusion or fraud. Bidder further understands collusive bidding is a violation of state and federal law and can result in fines, prison sentences and civil damage awards.

Bidder agrees to abide by all conditions of this bid and certifies that person signing is authorized to sign this bid or proposal for the bidder.

8. CERTIFICATE OF ACCEPTANCE

By responding to this Bid, the Bidder acknowledges that he/she has read this solicitation document, including any addenda, exhibits, attachments, and/or appendices in its entirety, and agrees that no pages or parts of the document have http://www.fultoncountyga.gov/ been omitted, that he/she understands, accepts and agrees to fully comply with the requirements therein.

9. CONFLICT OF INTEREST

Bidder states that no County officer or employee, nor any business entity in which they have an interest: a) Has an interest in the contract awarded; b) Has been employed or retained to solicit or aid in the procuring of the resulting contract; c) Will be employed in the performance of such contract without immediate disclosure of such fact to the County.

10. BID EVALUATION

a. Each Bid timely received and in the County's hands at the time set forth for the Bid opening shall constitute an offer to perform the Agreement on the terms and conditions thereof, in strict accordance with the Agreement documents, and all other requirements, all for the Bid total. For good cause and valuable consideration, the sufficiency of which is acknowledged by submittal of a Bid, each Bidder promises and agrees that its Bid shall be irrevocable for a period of sixty calendar days after the Bid opening and will not be withdrawn or modified during that time. The County may accept any Bid by giving the Bidder Written Notice of acceptance during that time. If necessary, the period of time specified may be extended by written agreement between the County and the Bidder or Bidders concerned.

b. After the Bids have been opened and before any award is made, the County will evaluate the Bid process, the Bid total, the supplements to the Bid form, Bidder's experience, proposed Subcontractors and equipment manufacturers and other data relating to Bidders' responsibility and qualifications to perform the Agreement satisfactorily.

c. All extension of the unit prices shown and the subsequent addition of extended amounts may be verified by the County. In the event of a discrepancy between the unit price bid and the extension, the unit price will be deemed intended by the Bidder and the extension shall be adjusted. In the event of a discrepancy between the sum of the extended amounts and the bid total, the sum of the extended amounts shall govern.

d. Bidder may be required to submit, in writing, the addresses of any proposed

Subcontractors or Equipment manufacturers listed on the Bid, and to submit other material information relative to proposed Subcontractors or Equipment manufacturers. The County reserves the right to disapprove any proposed Subcontractor or Equipment manufacturers whose technical or financial ability or resources or whose experience are deemed inadequate.

e. The County reserves the right to reject any Bid the prices of which appear to be unbalanced, and to reject any or all Bids, or parts thereof, if it determines, in its sole discretion, that such rejection is in the best interest of the County. Where only a single responsible and responsive Bid is received, the County may in its sole discretion, elect to conduct a price or cost analysis of the Bid. Such Bidder shall cooperate with such analysis and provide such supplemental information as may be required. The determination whether to enter into an Agreement with such sole Bidder shall be solely within the County’s discretion and not dependent upon performance of a price or cost analysis.

f. Bids will be evaluated on the basis of determining the lowest Bid total of a Bidder, not including alternates, whose Bid is responsive to the Invitation to Bid and who is determined to be technically, financially and otherwise responsible to perform the Agreement satisfactorily, and to meet all other requirements of the Bidding Documents relating thereto. Any Bid may be rejected if it is determined by the County to be non-responsive, provided, however, that the County reserves the right to waive any irregularities or technicalities which it determines, within its sole discretion, to be minor in nature and in the interest of the public. Furthermore, any Bid may be rejected if it is determined by the County, in its sole discretion, that the Bidder is not capable of performing the Agreement satisfactorily based upon review of its experience and technical and financial capabilities, or the failure of such bidder to provide information requested relating to such determination. Additionally, the County reserves the right to disqualify Bids, before and after the bid opening, upon evidence of collusion with intent to defraud or other illegal practices upon the part of any Bidder(s).

g. The County intends to award the Agreement at the earliest practicable date to the lowest responsive, responsible Bidder(s), provided that the Bid is within the funds available for the project. In addition, the Commission reserves the right to reject all Bids if it determines, in its sole discretion, that the public interest will be best served by doing so.

h. A Pre-Award Conference may be conducted with the apparent low Bidder(s) to review general requirements of the Bidding Documents.

11. AWARD CRITERIA

Award will be made after evaluating the prices, responsiveness and responsibility of each Bidder.

A. Responsiveness: The determination of responsiveness will be determined by the following:

a. The completeness of all material, documents and/or information required by the County;

b. Whether the bidder has submitted a complete Bid form without irregularities, excisions, special conditions, or alternative bids for any item unless specifically requested in the Bid form.

B. Responsibility: The determination of the bidder’s responsibility will be determined by the following

a. The ability, capacity and skill of the Bidder to perform and/or provide the

Work required;

b. The County reserves the right to reject any bid if the evidence submitted by, or investigation of, the bidder fails to satisfy the County that he/she is properly qualified to carry out the obligations of the Contract;

c. The character, integrity, reputation, judgment, experience and efficiency of the Bidder;

d. The quality of performance of work on previous contracts or work; Maintains a permanent place of business individually or in conjunction with the prime contractor.

e. Has the appropriate and adequate technical experience necessary to perform the Work;

f. Has adequate personnel and equipment to do the Work expeditiously;

g. Has suitable financial means to meet obligations incidental to the work.

12. DISQUALIFICATION OF BIDDERS

Any of the following may be considered as sufficient for disqualification of a Bidder and the rejection of the Bid:

a. Submission of more than one Bid for the same work by an individual, firm, partnership or Corporation under the same of different name(s);

b. Evidence of collusion among Bidders;

c. Previous participation in collusive bidding on Work for the County;

d. Submission of an unbalanced Bid, in which the prices quoted for same items are out of proportion to the prices for other items;

e. Lack of competency of Bidder. The Agreement will be awarded only to a

Bidder(s) rated as capable of performing the Work.

13. BASIS OF AWARD

The County shall award to the overall lowest responsive and responsible bidder complying with the provisions of the ITB – Commodities.

The following criteria may be considered by the County in selecting the most advantageous quote: a) Ability to perform the service required within the specified time; b) Conformance to specification; c) The quality of performance in previous contracts; d) Financial ability to perform the contract; e) Item pricing; f) Bidder references. The County reserves the right to cancel the solicitation and to reject any or all bids in whole or in part and is not bound to accept any bid if rejection of that bid is determined to be contrary to the best interest of the County.

14. SAMPLES

Samples of items when required, must be furnished free of expense to the County and upon request, be returned to the Bidder at the Bidder’s expense. Samples of selected items may be retained for comparison purposes.

15. NEW

All items bid must be new. Used, rebuilt and refurbished items will not be considered unless specifically authorized by Fulton County in the written specifications.

16. BRAND NAME SPECIFICATIONS AND APPROVED EQUIVALENTS

Unless otherwise specified, manufacturer’s names, trade names, brand names, information and/or catalog numbers listed in the specifications are intended only to identify the quality and characteristics desired. They are not intended to limit competition. The Bidder may offer any equivalent product which meets or exceeds the specifications. If bids are based on equivalent products, the bid must: a) Indicate the alternate manufacturer’s name and catalog number; b) Include complete descriptive literature and/or specifications; c) Include proof that the proposed equivalent will meet the specifications. The County reserves the right to be the sole judge of what is equal and acceptable to meet its needs in all respects. If Bidder fails to name a substitute, goods identical to the published standard must be furnished.

17. INSURANCE AND RISK MANAGEMENT PROVISIONS

The successful Bidder(s) shall, during all terms of the Contract maintain in full force and effect (i) commercial general liability insurance in the amounts of $1,000,000.00 (each occurrence), with a $2,000,000.00 (general aggregate), (ii) automobile liability insurance with a combined single limit for bodily injury and property damage of not less than $500,000 with respect to any owned, hired and/or non-owned vehicles utilized in the performance of its’ services. At the time of award, a copy of the successful Bidder’s Certificate of Insurance must be provided.

18. INDEMNIFICATION

Bidder hereby agrees to release, indemnify, defend and hold harmless the County, its Commissioners, officers, employees, subcontractors, successors, assigns and agents from and against any and all losses (including death), claims, damages, liabilities, costs and expenses (including but not limited to all actions, proceedings, or investigations in respect thereof and any outcome of any such action, proceeding, or investigation), caused by, relating to, based upon or arising out of any act or omission by contractor, it’s directors, officers, employees, subcontractors, successors, assigns or agents, or otherwise in connection with its acceptance, of the performance, or nonperformance, of its obligations under this agreements.

Bidder’s obligation to protect, defend, indemnity and hold harmless, as set forth hereinabove, shall also include, but is not limited to, any matter arising out of any actual or alleged infringement of any patent, trademark, copyright, or service mark, or other actual or alleged unfair competition disparagement of product or service, or other tort or any type whatsoever, or any actual or alleged violation of trade regulations.

Bidder further agrees to protect, defend, indemnify and hold harmless Fulton County, its Commissioners, officers, employees, subcontractors, successors, assigns and agents from and against any and all claims or liability for compensation under the Worker’s Compensation Act, Disability Benefits Act, or any other employee benefits act arising out of injuries sustained by any employees of Bidder. These indemnities shall not be limited by reason of the listing of any insurance coverage.

19. TAXES

Fulton County is exempt from the State of Georgia sales tax and exemption certificate will be furnished upon request.

20. DELIVERY

All prices must be FOB Destination, unloaded inside and assembled unless otherwise indicated.

21. PLACEMENT OF ORDERS

Orders will be placed using one of the following methods:

a) A Purchase Order (PO) will be issued as required for departments having a known requirement, fixed quantities, and one-time delivery, during the entire life of the contract.

b) A Delivery Order (DO) will be issued as required for departments having a known requirement, fixed quantities, and one-time delivery, during the entire life of the contract.

22. RIGHTS AND REMEDIES OF COUNTY FOR DEFAULT

If any item furnished by the Bidder fails to conform to specifications, or to the sample submitted by the Bidder, the County may reject it. Upon rejection, the Bidder must promptly reclaim and remove such item without expense to the County, and shall immediately replace all such rejected items with others conforming to such specification and samples. If the Bidder fails to do so, the County has the right to purchase in the open market a corresponding quantity of any such items and to deduct from any monies due the Bidder the difference between the prices named in the purchase order and the actual cost to the County. If the Bidder fails to make prompt delivery of any item, the County has the right to purchase such item in the open market and to deduct from any monies due the Bidder the difference between the prices named in the purchase order and the actual replacement cost to the County. The rights and remedies of the County identified above are in addition to any other rights and remedies provided by law or under the purchase order.

23. INVOICES AND PAYMENT TERMS

The awarded Vendor must be registered as a Vendor in the Vendor Self Service System at https://vss.fultoncountyga.gov/webapp/VSSPROD/AltSelfService in order for the Department of Purchasing & Contract Compliance to issue a purchase order or master agreement and for the Vendor to receive payment.

All invoices must include the purchase order number or master agreement number.

Failure to comply may result in delayed payments. The County payment terms are Net 30 days unless a cash discount is allowed for payment within not less than twenty (20) days. The payment term shall begin on the date the merchandise is inspected, delivered and accepted by the County.

Submittal of Invoices: Invoices shall be submitted as follows:

Via Mail:

Fulton County Government 141 Pryor Street, SW Suite 7001 Atlanta, Georgia 30303 Attn: Finance Department – Accounts Payable

OR

Via Email:

Email: Accounts.Payable@fultoncountyga.gov

At minimum, original invoices must reference all of the following information:

1) Vendor Information

a. Vendor Name

b. Vendor Address

c. Vendor Code

d. Vendor Contact Information https://vss.fultoncountyga.gov/webapp/VSSPROD/AltSelfService mailto:Accounts.Payable@fultoncountyga.gov

e. Remittance Address

2) Invoice Details

a. Invoice Date

b. Invoice Number (uniquely numbered, no duplicates)

c. Purchase Order Reference Number

d. Date(s) of Services Performed

e. Itemization of Services Provided/Commodity Units

3) Fulton County Department Information (needed for invoice approval)

a. Department Name

b. Department Representative Name

24. LEGAL REQUIREMENTS

Federal, State, County and local ordinances, rules and regulations, and policies shall govern development, submittal and evaluation of quote and disputes about quotes.

Lack of knowledge by any Bidder about applicable law is not a defense.

25. ASSIGNMENT

Any purchase order awarded shall not be assignable by the Bidder without the express written approval of the County, and shall not become an asset in any bankruptcy, receivership or guardianship proceedings.

26. REJECTION OF BID

Bids may be considered irregular and may be rejected if they show omissions, alternations of form, additions not called for, conditions, limitations, unauthorized alternate bids or other irregularities of any kind. The County reserves the right to waive minor technicalities or irregularities of bid.

27. TERMINATION

In the event any of the provisions of the purchase order are violated, the County may serve written notice of its intention to terminate the purchase order. Such notice will state the reason(s) for such intention, and unless within ten (10) days after serving notice upon the contractor, such violation has ceased and satisfactory arrangements for correction made, the purchase order shall, upon expiration of ten (10) days, be terminated. Further, the County reserves the right to terminate for its convenience any purchase order in whole or in part upon giving thirty (30) days prior written notice to the other party.

28. DEBARMENT

If a Bidder is presently debarred, suspended, proposed for debarment, declared ineligible, or otherwise excluded from doing business with any government agency which prohibits your firm from participating in any procurement, the Bidder must provide the County with that information as part of its response to this solicitation.

Failure to fully and truthfully provide the information required, may result in the disqualification of your bid from consideration or termination of the purchase order, once awarded.

29. RIGHT TO PROTEST

Any actual bidder or offeror that has submitted a bid/proposal for a particular procurement and is aggrieved in connection with the solicitation or award of the contract shall protest in writing to the purchasing agent after the date that the specific bid or proposal is submitted. No protest will be accepted or considered prior to the date the specific bid or proposal is submitted; it will be considered untimely. All protests shall set forth in full detail the factual and legal basis for the protest and specific relief sought by the protestor. Protests arising from factual or legal basis that the protestor knew or should have known prior to the submission of the bid/proposal must be submitted within three business days of the submission of the bid/proposal.

Protests arising from factual or legal basis that the protestor knew or should have known subsequent to the date the bid/proposal was submitted must be submitted within ten business days after the protestor knew or should have known of such basis, but in no event shall any protest be submitted more than ten business days after the award of the contract. Untimely protests will not be considered by the purchasing agent and will be simply denied as untimely. Decisions on timeliness by the purchasing agent are not appealable. An oral protest or a protest to an official, employee, User Department, or other person apart from the Director of Purchasing & Contract Compliance does not comply.

30. BINDING AUTHORITY

The individual submitting this bid must have binding authority to submit contracts on behalf of the responding company. By submitting a response, Bidder agrees that their bid is an offer to sell. All bidders shall comply with all Fulton County purchasing laws, policies, and procedures, as well as relevant state and federal laws, including compliance with EEOC hiring guidelines and requirements under the Americans with Disabilities Act.

31. INTERGOVERNMENTAL COOPERATIVE PROCUREMENT STATEMENT

The County through the Department of Purchasing & Contract Compliance grants to any public serving governmental agency, authorization to purchase equivalent services or products described herein/with this solicitation at the same submitted unit bid price, terms and conditions, but only with the consent of the Contractor/Consultant/ Service Provider. Public agencies shall have the ability to purchase the awarded goods and services from the awarded Contractor(s)/Consultant(s)/Service Provider(s) under the terms and conditions of the resultant contract. Any purchases shall be between the Contractor/Consultant/Service Provider and the participating public agency and shall not impact the Contractor’s/Consultant’s/Service Provider’s obligation to the County.

Any estimated purchase volumes listed herein do not include other public agencies and the County makes no guarantee as to their participation.

22ITBC074A-JWT

Corporation Stops and Brass Fittings

SECTION 2: BID FORM

Submitted To: Fulton County Government

For: 22ITBC074A-JWT, Corporation Stops and Brass Fittings Submitted By: ______________________

Bid Due Date: Monday, November 21, 2022

Instructions: This Bid Form must be submitted in its entirety as an attachment with the Bid response submitted electronically using the County’s on-line Vendor Self Service System.

The undersigned, as Bidder, hereby declares that the only person or persons interested in the Bid as principal or principals is or are named herein and that no other person than herein mentioned has any interest in this Bid or in the Contract to be entered into; that this Bid is made without connection with any other person, company or parties making a Bid; and that it is in all respects fair and in good faith without collusion or fraud.

The Bidder further declares that it examined the scope of work and is informed fully in regard to all conditions pertaining to the work to be provided and has examined the contractual documents relative thereto, and has read all instructions to Bidders and General Conditions furnished prior to the openings of bids; and is satisfied relative to the work to be performed.

The Bidder proposes and agrees, if this Bid is accepted, to contract with the Board of Commissioners of Fulton County, Atlanta, Georgia, in the form of contact specified, to furnish all necessary materials, equipment, machinery, tools, apparatus, means of transportation and labor necessary in the itemized cost and to complete the work in full and complete accordance with the scope of work shown, noted, and reasonably intended requirements of the scope of work to the full and entire satisfaction of the Board of Commissioners of Fulton County, Atlanta, Georgia, with a definite understanding that no money will be allowed for extra work except as set forth in the attached General Conditions and Contract Documents for the following prices.

THE TOTAL COST IS THE AMOUNT UPON WHICH THE BIDDER WILL BE

FORMALLY EVALUATED AND WHICH WILL BE USED TO DETERMINE THE LOWEST

RESPONSIVE AND RESPONSIBLE BIDDER.

TOTAL COST AMOUNT (Total amount for all items)

(Dollar Amount in Numbers)

(Dollar Amount in Words)

The Bidder agrees hereby to commence work under this Contract, with adequate personnel and equipment, on a date to be specified in a written “Notice to Proceed” from the County.

The Bidder declares that he understands that the quantities shown for the unit prices items are the estimated annual use and are subject to either increase or decrease, and that should the quantities of any of the items of work be increased, the Bidder proposes to provide the item(s) at the unit prices stated herein; and should the quantities be decreased, the Bidder also understands that the item(s) will be provided at the unit price bid and will make no claim for anticipated profits for any decrease in quantities; and that actual quantities will be determined upon order, at which time adjustments will be made to the contract amount by direct increase or decrease.

Unit Pricing (The County shall award to the overall lowest responsive and responsible bidder complying with the provisions of this ITBC)

GROUP A – VALVES AND EXPANSION CONNECTIONS:

ITEM

NO.

ITEM DESCRIPTION ESTIMATED

QUANTITY

UNIT OF

MEASURE

UNIT

PRICE

EXTENSION

COST ($)

1. Corporation Stop- ¾” x ¾” x ¾” Male Iron Pipe Thread Inlet by Grip Joint For Copper or Plastic Tubing (CTS) Outlet, Ford Meter Box Company Inc. Model # F600-3-NL, AY McDonald Model # 74701 3/4 AWWA inlet X Flare outlet or equal

100 Each

2. Corporation Stops- 1” x 1” x 1” AWWA/CC Taper Thread Inlet by Grip Joint For Copper or Plastic Tubing (CTS) Outlet, Ford Meter Box Company Inc. Model # F600-4-NL, AY McDonald Model # 74701 1 AWWA inlet x Flare outlet or equal

1 Each

3. Ball Valve Curb Stops- ¾” x ¾” x ¾” Flare Copper Inlet by Female Iron Pipe Thread Outlet, Ford Meter Box Company Inc. Model # B21- 333W-NL, AY McDonald Model # 76102W 3/4 or equal

50 Each

4. Ball Valve Curb Stops – ¾” x 1” x 1” Flare Copper Inlet by Female Iron Pipe Thread Outlet, Ford Meter Box Company Inc. Model # B21-344- W-NL, AY McDonald Model # 76102W 1X3/4X1 or equal

15 Each

5. Ball Valve Curb Stops – 1” x 1” x 1” Flare Copper Inlet by Female Iron Pipe Thread Outlet, Ford Meter Box Company Inc. Model # B21-444-NL, AY McDonald Model # 76102 1 or equal

10 Each

6. Ball Valve Curb Stops – ¾” x ¾” x ¾” Grip Joint Compression For Copper or Plastic Tubing (CTS) Inlet by Female Iron Pipe Thread Outlet, Ford Meter Box Company Inc. Model # B41-333-

1 Each

G-NL, AY McDonald Model # 76102G 3/4 or equal

7. Ball Valve Curb Stops – ¾” x ¾” x ¾” Grip Joint for Copper or Plastic Tubing (CTS) Inlet and Outlet, Ford Meter Box Company Inc. Model # B44-333-G-NL, AY McDonald Model # 76100G 3/4 or equal

20 Each

8. Ball Valve Curb Stops – 1” x 1” x 1” Grip Joint Compression for Copper or Plastic Tubing (CTS) Inlet by Female Iron Pipe Thread Outlet, Ford Meter Box Company Inc. Model # B41-444-G- NL, AY McDonald Model # 76102G 1 BALL or equal

20 Each

9 Ball Valve Curb Stops – 1” x 1” x 1” Grip Joint for Copper or Plastic Tubing (CTS) Inlet and Outlet, Ford Meter Box Company Inc. Model # B44-444- G-NL, AY McDonald Model # 76100G 1 or equal

20 Each

10. Ball Valve Curb Stop – ¾” x ¾” x ¾” Female Iron Pipe Thread Inlet by Female Iron Pipe Thread Outlet, Ford Meter Box Company Inc. Model # B11-333W-NL, AY McDonald Model # 76101W 3/4 or equal

25 Each

11. Ball Valve Curb Stops – 1” x 1” x 1” Female Iron Pipe Thread Inlet by Female Iron Pipe Thread Outlet, Ford Meter Box Company Inc. Model # B11-444W-NL, AY McDonald Model # 76101W 1 or equal

25 Each

12 Ball Valve Curb Stops – 1-1/2” x 1-1/2” x 1-1/2” Female Iron Pipe Thread Inlet by Female Iron Pipe Thread Outlet, Ford Meter Box Company Inc. Model # B11-666W-NL, AY McDonald Model # 76101W 1 1/2 or equal

1 Each

13. Ball Valve Curb Stops – 2” x 2” x 2” Female Iron Pipe Thread Inlet by Female Iron Pipe Thread Outlet, Ford Meter Box Company Inc. Model # B11-777W-NL, AY McDonald Model # 76101W 2 or equal

6 Each

14. Straight Dual Cart Check Valves- 1” x 1” x 1” Meter Swivel Nut Inlet by Female Iron Pipe Outlet, Ford Meter Box Company Inc. Model # HHC31-444-NL, AY McDonald Model # 711-4JF 54 or equal

250 Each

15. Straight Dual Cart Check Valves- 5/8” x ¾” & ¾” Integral Female Meter thread Union Inlet by Male Iron Pipe Thread Outlet, Ford Meter Box Company Inc. Model # HHCI38-323-NL, AY McDonald Model # 711-3NP 33 or equal

150 Each

16 Straight Dual Cart Check Valves – 5/8” x ¾” & ¾” Female Meter Thread Union Inlet by Male Meter Thread Outlet, Ford Meter Box Company Inc.

2000 Each

Model # HHCI33-322-NL, AY McDonald Model # 711-3NA 44 or equal

17. Expansion Connection- 5/8” x ¾” & ¾” Hand Wheel Type, Ford Meter Box Company Inc.

Model # EC-23-NL, AY McDonald Model # 714- 2EHG or equal

900 Each

Total: Group A (Lines 1 – 17)

GROUP B: COUPLINGS

ITEM DESCRIPTION ESTIMATED

QUANTITY

UNIT OF

MEASURE

UNIT

PRICE

EXTENDED COST

18. Flare Copper Couplings – ¾” x ¾” x 1-13/16” Flare Copper to Female Iron Pipe Thread, Ford Meter Box Company Inc. Model # C21-33-NL, AY McDonald Model # 74754.75 or equal

1 Each

19 Flare Copper Couplings 1” x 1” x 2-1/8” Flare Copper to Female Iron Pipe Thread, Ford Meter Box Company Inc. Model # C21-44-NL, AY McDonald Model # 74754 1 or equal

1 Each

20 Flare Copper Couplings – ¾” x ¾” x 2-1/4” Flare Copper to Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C28-33-NL, AY McDonald Model # 74753.75 or equal

50 Each

21 Flare Copper Couplings – 1” x 1” x 3-5/8” Flare Copper to Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C28-44-NL, AY McDonald Model # 74753 1 or equal

1 Each

22 Grip Joint Couplings – ¾” x ¾” Grip Joint for Copper or Plastic Tubing (CTS) Both Ends, Ford Meter Box Company Inc. Model # C44-33-G-NL, AY McDonald Model # 74758G 3/4 or equal

100 Each

23 Grip Joint Couplings – ¾” x 1” Grip Joint For Copper or Plastic Tubing (CTS) Both Ends, Ford Meter Box Company Inc. Model # C44-34-G-NL, AY McDonald Model # 74758G 3/4X1 or equal

20 Each

24 Grip Joint Couplings 1” x 1” Grip Joint For Copper or Plastic Tubing (CTS) Both Ends, Ford Meter Box Company Inc. Model # C44-44-G-NL, AY McDonald Model # 74758G 1 or equal

100 Each

25 Grip Joint Couplings 1-1/2” x 1-1/2” Grip Joint For Copper or Plastic Tubing (CTS) Both Ends, Ford Meter Box Company Inc. Model # C44-66- G-NL, AY McDonald Model # 74758G 1 1/2 or equal

1 Each

26 Grip Joint Couplings 2” x 2” Grip Joint For Copper or Plastic Tubing (CTS) Both Ends, Ford

1 Each

Meter Box Company Inc. Model # C44-77-G-NL, AY McDonald Model # 74758G 2 or equal

27 Grip Joint Tees – ¾” x ¾” Grip Joint For CTS to Grip Joint for CTS by Grip Joint For CTS, Ford Meter Box Company Inc. Model # T444-333-G- NL, AY McDonald Model # 74760G 3/4 or equal

15 Each

28 Grip Joint Tees – 1” x 1” Grip Joint For CTS to Grip Joint for CTS by Grip Joint For CTS, Ford Meter Box Company Inc. Model # T444-444-G- NL, AY McDonald Model # 74760G 1 or equal

25 Each

29 Quick Joint Couplings – 2” x 2” Quick Joint Couplings for Copper or Plastic Tubing (CTS) Both Ends, Ford Meter Box Company Inc. Model

# C44-77-Q-NL,

AY McDonald Model # 74758Q 2 or equal

6 Each

30 Straight Meter Couplings – 5/8” x ¾” & ¾” x 2” Meter Swivel Nut by Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C38-23-2-NL, AY McDonald Model # 74620 3/4X3/4X2.00 or equal

1000 Each

31 Straight Meter Couplings – 5/8” x ¾” & ¾” x 2- 1/2” Meter Swivel Nut by Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C38-23- 2-5-NL, AY McDonald Model # 74620 3/4X3/4X2.50 or equal

3000 Each

32 Straight Meter Couplings – 5/8” x ¾” & ¾” x 3” Meter Swivel Nut by Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C38-23-3-NL, AY McDonald Model # 74620 3/4X3/4X3.00 or equal

100 Each

33 Straight Meter Couplings – 5/8” x ¾” & ¾” x 12- Meter Swivel Nut by Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C38-23-12-NL, AY McDonald Model # 74620 3/4X3/4X12.00 or equal

1500 Each

34 Straight Meter Couplings – 1” x 1” x 2-5/8 Meter Swivel Nut by Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C38-44-2-625-NL, AY McDonald Model # 74620 1X1X2.63 or equal

100 Each

35 Meter Coupling – 1” x 1” x 12” Meter Swivel Nut by Male Iron Pipe Threads, Ford Meter Box Company Inc. Model # C38-44-12-FAB-NL, AY McDonald Model # 74620 1X1X12.00 or equal

250 Each

36 Lok-Pak Meter Couplings – 1-1/2” x 1-1/2” x 2- 9/16” Meter Flange by Pack Joint For Iron Pipe, Ford Meter Box Company Inc. Model # CF35-66- NL, AY McDonald Model # 7610-55 1 1/2 or equal

10 Each

37 Lok-Pak Meter Couplings 2” x 2” x 2-13/16” 100 Each

Meter Flange by Pack Joint for Iron Pipe, Ford Meter Box Company Inc. Model # CF35-77-NL, AY McDonald Model # 7610-55 2 or equal

Total: Group B (Lines 18-37)

GROUP C: SETTERS, RESETTERS, AND RETRO SETTERS, MULTI-BRANCH TEES

ITEM DESCRIPTION ESTIMATED

QUANTITY

UNIT OF

MEASURE

UNIT

PRICE

EXTENDED

COST ($)

38 Large Size Meter Setters- 1-1/2” FNPT x FNPT, AY McDonald Model # 720R600WWFF 666 or equal

1 Each

39 Large Size Meter Setters 2” FNPT x FNPT, AY McDonald Model # 720R700WWFF777 or equal

1 Each

40 40 Series Resetters - 5/8" x 3/4" x 9" Angle Key Valve by Angle Cartridge Dual Check Valve- Meter Thread Inlet and Outlet, Ford Meter Box Company Inc. # VHC42-9W-NLor equal

Each

41 40 Series Resetters 5/8” x ¾” x 18” Angle Key Valve by Angle Cartridge Dual Check Valve- Meter Thread Inlet and Outlet, Ford Meter Box Company Inc. Model # VHC42-18W-NL, AY McDonald Model # 718-218LD or equal

10 Each

42 40 Series Resetters One (1) inch x One (1) x 9” Angle Key Valve by Angle Cartridge Dual Check Valve- Meter Thread Inlet and Outlet, Ford Meter Box Company Inc. Model # VHC44-9W-NL, AY McDonald Model # 718-409LD or equal

10 Each

43 40 Series Resetters One (1) inch x One (1) x 18” Angle Key Valve by Angle Cartridge Dual Check Valve- Meter Thread Inlet and Outlet, Ford Meter Box Company Inc. Model # VHC44-18W-NL, AY McDonald Model # 718-418LD or equal

1 Each

44 Retrosetters- 5/8” x ¾”Angle Ball Valve Inlet by Angle Cartridge Dual Check Valve Outlet, Ford Meter Box Company Inc. Model # RETRO- CVBHC-NL, AY McDonald Model # 717-204WD or equal

10 Each

45 Flare Copper Multi-Branch – 1-1/2” x 1” x 1” x 1” Three Flare Copper by Single Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # Y28-346-NL, AY McDonald Model # NA or equal

10 Each

46 Flare Copper Multi Branch – 2” x 1” x 1” x 1” Three Flare Copper by Single Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # Y28-347-NL, AY McDonald Model # 708Y3MC 2x1 or equal

Total: Group C (Lines 39-46)

GROUP D: SADDLES

ITEM DESCRIPTION ESTIMATED

QUANTITY

UNIT OF

MEASURE

UNIT

PRICE

EXTENDED

COST ($)

47 202B Double Strap Brass Saddles for AC and Ductile Iron Pipe, Ford Meter Box Company Inc.

Model # 202B-750-IP4, AY McDonald Model # 3826 6X1 or equal

10 Each

48 202B Double Strap Brass Saddles for AC and Ductile Iron Pipe, Ford Meter Box Company Inc.

Model # 202B-750-IP7, AY McDonald Model # 3826 6X2 or equal

10 Each

49 202B Double Strap Brass Saddles for AC and Ductile Iron Pipe, Ford Meter Box Company Inc.

Model # 202B-962-IP7, AY McDonald Model # 3826 8X2 or equal

10 Each

50 202B Double Strap Brass Saddles for AC and Ductile Iron Pipe, Ford Meter Box Company Inc.

Model # 202B-1212-IP7, AY McDonald Model # 3826 10X2 or equal

10 Each

51 202B Double Strap Brass Saddles for AC and Ductile Iron Pipe, Ford Meter Box Company Inc.

Model # 202B-1438-IP7, AY McDonald Model # 3826 12X2 or equal

10 Each

52 202B Double Strap Brass Saddles for AC and Ductile Iron Pipe, Ford Meter Box Company Inc.

Model # 202B-962-CC3, AY McDonald Model # 3825 8X3/4 or equal

20 Each

53 202B Double Strap Brass Saddles for AC and Ductile Iron Pipe, Ford Meter Box Company Inc.

Model # 202B-962-CC4, AY McDonald Model # 3825 8X1 or equal

10 Each

54 202B Double Strap Brass Saddles for AC and Ductile Iron Pipe, Ford Meter Box Company Inc.

Model # 202B-1212-CC4, AY McDonald Model # 3825 10X1 or equal

10 Each

55 202B Double Strap Brass Saddles for AC and Ductile Iron Pipe, Ford Meter Box Company Inc.

Model # 202B-1438-CC4, AY McDonald Model # 3825 12X1 or equal

Total: Group D (Lines 48-55)

GROUP E: BUSHINGS, BRASS HEX BUSHINGS, METER FLANGES

ITEM DESCRIPTION ESTIMATED

QUANTITY

UNIT OF

MEASURE

UNIT

PRICE

EXTENDED

COST ($)

56 ¾ inch x 1 inch Brass Bushing, Female Iron Pipe Thread to Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C18-34-NL, AY McDonald Model # 72206 1x3/4 or equal

2500 Each

57 ¾ inch x 1-1/2 inch Brass Bushing, Female Iron Pipe Thread to Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C18-36-NL, AY McDonald Model # 72206 1 1/2x3/4 or equal

1 Each

58 ¾ inch x 2 inch Brass Bushing, Female Iron Pipe Thread to Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C18-37-NL, AY McDonald Model # 72206 2x3/4 or equal

1 Each

59 One (1) inch x ¾ inch Brass Bushing, Female Iron Pipe Thread to Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C18-43-NL, AY McDonald Model # NA or equal

25 Each

60 One (1) inch x 1-1/2 inch Brass Bushing, Female Iron Pipe Thread to Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C18-46-NL, AY McDonald Model # NA or equal

10 Each

61 One (1) inch x Two (2) inch Brass Bushing, Female Iron Pipe Thread to Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C18-47-NL, AY McDonald Model # NA or equal

1 Each

62 1-1/2 inch x Two (1) inch Brass Bushing, Female Iron Pipe Thread to Male Iron Pipe Thread, Ford Meter Box Company Inc. Model # C18-67-NL, AY McDonald Model # NA or equal

1 Each

63 Meter Flange –1-1/2” Meter Flange x 1-1/2” Female Iron Pipe, Ford Meter Box Company Inc Model # CF31-66-NL, AY McDonald Model # 7610F 1 1/2 or equal

50 Each

64 Meter Flange – 2” Meter Flange by 2” Female Iron Pipe Thread, Ford Meter Box Company Inc Model # CF31-77-NL, AY McDonald Model # 7610F 2 or equal

40 Each

Total: Group E (Lines 56-64)

GROUP F: BRASS STOCK, TEES, ELBOWS

NO

ITEM DESCRIPTION

ESTIMATED

QUANTITY

UNIT OF

MEASURE

UNIT PRICE

EXTENSION COST

¾ inch Straight Lead Free Pipe Coupling, ¾” FNPT Type, Merit Brass Model # XNL-111-12 or equal

One (1) inch Straight Lead Free Pipe Coupling 1” FNPT Type, Merit Brass Model # XNL111-16 or equal

1-1/2 Inch Straight Lead Free Pipe Coupling 1- 1/2” FNPT Type, Merit Brass Model # XNL111- 24 or equal

Two (2) inch Straight Lead Free Pipe Coupling, 2 inch FNPT Type, Merit Brass Model # XNL111- 32 or equal

Close MNPT Brass Nipples – ¾” x Close MNPT Brass Nipples, Merit Brass Inc. Model # 2012- 001 or equal

Close MNPT Brass Nipples – One (1) x Close MNPT Brass Nipples, Merit Brass Inc. Model # 2016-001 or equal

Close MNPT Brass Nipples – One and One-Half (1-1/2) x Close MNPT Brass Nipples, Merit Brass Inc. Model # 2024-001 or equal

Close MNPT Brass Nipples – Two (2) Inch x Close MNPT Brass Nipples, Merit Brass Inc.

Model # 2032-001 or equal

MNPT Global Brass Nipples – ¾ inch x two (2) inch MNPT Brass Nipple, Merit Brass Inc. Model # 2012-200 or equal

MNPT Global Brass Nipples – ¾ inch x four (4) inch MNPT Brass Nipples, Merit Brass Inc.

Model # 2012-400 or equal

MNPT Global Brass Nipples – ¾ inch x six (6) inch MNPT Brass Nipples, Merit Brass Inc.

Model # 2012-600 or equal

MNPT Global Brass Nipples – ¾ inch x twelve

(12) inch MNPT Brass Nipples, Merit Brass Inc.

Model # 2012-1200 or equal

MNPT Global Brass Nipples – One (1) inch x four (4) inch MNPT Brass Nipples, Merit Brass Inc. Model # 2016-400 or equal

MNPT Global Brass Nipples – One (1) inch x six

(6) inch MNPT Brass Nipples, Merit Brass Inc.

Model # 2016-600 or equal

MNPT Global Brass Nipples – One (1) inch x twelve (12) inch MNPT Brass Nipples, Merit Brass Inc. Model # 2016-1200 or equal

MNPT Global Brass Nipples – One and one-half (11/2) inch x two (2) inch MNPT Brass Nipples, Merit Brass Inc. Model # 2024-200 or equal

(11/2) inch x four (4) inch MNPT Brass Nipples, Merit Brass Inc. Model # 2124-400 or equal

(11/2) inch x six (6) inch MNPT Brass Nipples, Merit Brass Inc. Model # 2124-600 or equal

(11/2)…