22-01185 dome product_service SAM.GOV Cont Oppt SCLS .docx

DOCX document 109 KB Posted Aug 10, 2022

Attached to: PURCHASE, DELIVERY AND REPLACEMENT NONPERSONAL SERVICES OF THE ASH DOME LOCATED AT THE AMERICAN SAMOA ATMOSPHERIC BASELINE OBSERVATORY (SMO).
Solicitation number: NRMJ10002201185SRG
Issued by: Department of Commerce National Oceanic and Atmospheric Administration

View the file

Other files

File	Type	Posted
22-01185 SITE VISIT FORM.docx	DOCX document	Aug 10, 2022

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

COMBINED SYNOPSIS/SOLICITATION

PURCHASE, DELIVERY AND REPLACEMENT NONPERSONAL SERVICES OF THE ASH DOME LOCATED AT THE AMERICAN SAMOA ATMOSPHERIC BASELINE OBSERVATORY (SMO).

NOTE: THIS ITEM IS TO BE DELIVERED DIRECTLY TO THE AMERICAN SAMOA ATMOSPHERIC BASELINE OBSERVATORY (SMO).

ASH MANUFACTURING BRAND: Replacement Dome with same brand as this has been tested, suited for the measurements, can withstand the harsh conditions of the South Pacific, and requires no building modifications (power and roof are already configured appropriately). Use of any other brand would require duplication in engineering, time and delay in installation with possible harm to the Mission and equipment.

***AS A REMINDER, THIS REQUIREMENT IS UNDER THE WHAT USED TO BE THE SERVICE CONTRACT ACT (SCA) AND IS NOW CALLED THE SERVICE CONTRACT LABOR STANDARDS STATUTE (SCLS). THIS WAGE DETERMINATION PROVIDES THAT THE HOURLY RATE FOR NONPERSONAL SERVICES MINIMUM IS A COMBINATION OF THE HOURLY WAGE RATE OF AND THE HEALTH & WELFARE AMOUNT FOR A TOTAL MINIMUM HOURLY WAGE WHICH YOUR COMPANY IS REQUIRED BY LAW TO PAY.

THERE ARE ADDITIONAL EXECUTIVE ORDERS LISTED WHICH WILL BE APPLICABLE.

(I) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice and in accordance with the simplified acquisition procedures authorized in FAR Part 13. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

(II) This solicitation is issued as a request for quotation (RFQ). Submit written quotes on RFQ Number

NRMJ10002201185SRG.

(III) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-06 (MAY 2022) (Deviation 2022-02)(NOV 2021).

(IV) This solicitation is being issued as a total small business set-aside. The associated NAICS code is 332311. The size standard is 750 employees (this has product as primary and service as secondary).

(V) This combined solicitation/synopsis is for purchase of the following commercial services:

CLIN 0001 Purchase, delivery and replacement nonpersonal services of the Ash Dome located at the American Samoa Atmospheric Baseline Observatory (SMO).

NOTE: THIS ITEM IS TO BE DELIVERED DIRECTLY TO THE AMERICAN SAMOA ATMOSPHERIC BASELINE OBSERVATORY (SMO).

(VI) Description of requirements is as follows:

SCOPE

STATEMENT OF NEED/WORK (SON/SOW)

DEPARTMENT OF COMMERCE (DOC)

NATIONAL OCEANIC ATMOSPHERIC ADMINISTRATION (NOAA)

EARTH SYSTEM RESEARCH LABORATORY (ESRL)

GLOBAL MONITORING LABORATORY (GML)

THE AMERICAN SAMOA ATMOSPHERIC BASELINE OBSERVATORY (SMO)

PURCHASE, DELIVERY AND REPLACEMENT NONPERSONAL SERVICES OF THE ASH DOME LOCATED AT THE AMERICAN SAMOA ATMOSPHERIC BASELINE OBSERVATORY (SMO)

PURPOSE:

A new dome replacement and supporting wall infrastructure for the Dobson Observatory at American Samoa is required at this time. The dome and wall infrastructure protect the Dobson Spectrophotometer instrument from the harsh weather conditions. The dome slit can be opened and the dome rotated to allow observations to be made in any direction at any angle above the horizon. The current dome (>25 years old) has exceeded its life expectancy and needs to be replaced.

SCOPE OR MISSION:

The Dobson ozone spectrophotometer instrument resides in a rotating, astronomy dome with 5-ft walls on the flat roof of the main SMO building. This measurement has been operational in American Samoa since 1975. The requirements to make scientific measurements with the Dobson instrument include tracking and viewing the sun at multiple locations across the sky as well as viewing the sky straight overhead. Ash Domes have been used by GML at the observatory locations for over 40-years. The product is ideally suited for the measurements, can withstand the harsh conditions of the South Pacific, and requires no building modifications (power and roof are already configured appropriately) saving thousands of dollars in engineering and installation expenses.

BACKGROUND:

The National Oceanic and Atmospheric Administration (NOAA) Global Monitoring Laboratory (GML) operates a year-round long-term atmospheric research facility on Cape Matatula, American Samoa. The American Samoa Atmospheric Baseline Observatory (SMO) is one of NOAA’s four atmospheric baseline observatories worldwide and monitors the composition of air flowing off the Pacific Ocean. Sitting on a 26.7-acre parcel of land, the observatory hosts a number of complementary atmospheric research projects from universities, federal agencies, and foreign research groups.

Located on an island in the South Pacific Ocean, the observatory is located in a highly corrosive environment. The island receives frequent, heavy rainfall (approx. 200 inches of rain annually) and averages around 80 degrees F (26.7 C). The high humidity and salt spray from the ocean expedite corrosion, making high quality building materials, corrosion-resisting treatments, and regular maintenance necessary. In addition, American Samoa is located in an active tectonic region, experiencing earthquakes and tsunamis, and is regularly in the path of tropical storms, requiring adherence to the latest building technology and regulations (seismic, wind, etc.).

TECHNICAL SPECIFICATIONS:

a) 10’6” diameter, Model REB, Ash-Dome, electrically operated upper shutter and azimuth with electric lower Type ‘B drop-out

b) 5’ tall support wall cylinder with door, lockset, and keys

c) Shipping of disassembled units to Pago Pago Port via Ocean freight

DELIVERY SCHEDULE:

Delivery will occur within 180 days after receipt of a purchase order.

SPECIAL REQUIREMENTS:

See delivery instructions below. All-Wheel Drive and Four- Wheel Drive vehicles are recommended for accessing the observatory, especially when the roads are wet from rain storms.

DELIVERY:

The American Samoa Atmospheric Baseline Observatory (SMO) sits on a 26.7-acre parcel of land. Logistically, a 0.5 mile paved asphalt private road connects the main road (Route 1 in the village of Tula) with the observatory facility. Following the contours of the hillside, it is a narrow road with many twists and steep hills. The driveway can be challenging for longer vehicles due to the narrow width, rolling topography, and occasional sharp corners. All Wheel Drive and Four Wheel Drive vehicles are recommended for accessing the observatory. The power lines do cross over the road in multiple locations along the driveway and may pose an overhead obstruction issue for very tall vehicles (no known issues with the power lines obstructing access to the site historically). Trees and dense vegetation may also pose an overhead obstruction for the tallest vehicles.

All cargo coming into/out of American Samoa is via ship or aircraft. The port is located in Pago Pago, approximately 45 minutes from SMO. The airport is located in Tafuna, approximately 60 minutes from SMO. Most hotels, stores, and services are located near Pago Pago and Tafuna. Few stores on the island stock construction supplies and their inventory is not reliable, so all materials for the project will need to be shipped to American Samoa in advance of construction work starting.

Scientific measurements obtained at SMO often represent the global background conditions for the atmospheric research community. As such, the measurements taken at the site are highly precise and need to be safeguarded to ensure that indoor room air and/or local site contamination does note negatively impact the long-term records. NOAA has developed a comprehensive banned construction materials (chemicals) list and each product used at the site must be cleared against this banned chemical list prior to use. The banned construction materials list will be provided to vendors and NOAA can assist with reviewing individual products as needed. Furthermore, it will be required to keep the science at SMO operational as much as possible throughout construction activities. For example, temporary power might be required and/or a phased approach to building modifications that allow for scientific systems to stay online to the greatest extent possible. All new construction work shall meet current code requirements.

Vendors will be responsible for obtaining any necessary permits.

Location of SMO:

Pago Pago, Cape Matatula, 96799-2521, American Samoa Latitude: -14.2474° N Longitude: -170.5644° W

Contract Line Item No. 01: Base contract: Ash Dome Procurement and Transportation to American Samoa Ash Dome Procurement and Transport

1. Furnish a Type R 10’6” REB Rotary Switch, Contractor Bars, and Electric Drop-Out Ash Dome model

2. Transport all relevant items and materials to American Samoa

a. Once relevant items and materials have arrived at American Samoa transport them to the Observatory site for storage

(VII) Delivery and nonpersonal services for replacement installation are to be completed within 180 days after award to the defined location above directly at the SMO site location.

(VIII) FAR 52.212-1 INSTRUCTIONS TO OFFERORS-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation. However, the small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition— (1)Is set aside for small business and has a value above the simplified acquisition threshold;

(2)Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or (3)Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show—

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of offers;

(3) The name, address, and telephone number of the offeror;

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) "Remit to" address, if different than mailing address;

(8) A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during preaward testing.

(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with FAR subpart 4.10), or alternative commercial products or commercial services for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of offers.

(1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.

(2)

(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and-

(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or

(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government’s control prior to the time set for receipt of offers; or

(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.

(g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.

(h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.

(i) Availability of requirements documents cited in the solicitation.

(1)

(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to- GSA Federal Supply Service Specifications Section Suite 8100 470 East L’Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925 Facsimile (202) 619-8978.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST ( https://assist.dla.mil/online/start/).

(ii) Quick Search ( http://quicksearch.dla.mil/).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by-

(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);

(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(j) Unique entity identifier.(Applies to all offers that exceed the micro-purchase threshold, and offers at or below the micro-purchase threshold if the solicitation requires the Contractor to be registered in the System for Award Management (SAM).) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity identifier that identifies the Offeror's name and address. The Offeror also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Offeror to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Offeror should indicate that it is an offeror for a Government contract when contacting the entity designated at www.sam.gov for establishing the unique entity identifier.

(k) [Reserved]

(l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:

(1) The agency’s evaluation of the significant weak or deficient factors in the debriefed offeror’s offer.

(2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.

(3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.

(4) A summary of the rationale for award;

(5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful offeror.

(6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.

RFQ FAR 52.237-1 SITE VISIT (APR 1984)

Vendors are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award.

YOUR SITE VISIT POINT OF CONTACT ARE THE FOLLOWING:

SITE VISIT POC Gregory Friedman, the American Samoa Observatory Station Lead, being listed as the POC for a site visit. His email address is smo.staff@noaa.gov and his phone number is 684-258-2848.

BEFORE COMING TO THE SITE YOU WILL NEED TO GET AN APPROVAL ACKNOWLEDGEMENT VIA EMAIL OR PHONE AND A TIME AND DATE SET UP FOR THE SITE VISIT.

To work on this site, no security badging is required, but for a site visit, all vendor(s) will need to present identification and identifying themselves and check in with the Weather Forecast Office staff at the vehicle gate to be permitted access to the site to complete the work (outside).

NOTE: NOT ATTENDING THE SITE VISIT WILL NOT BE AN ACCEPTABLE CAUSE TO JUSTIFY A LATER REQUEST FOR ADDITIONAL FUNDS.

NOTICE TO OFFERORS: Instructions for submitting quotations under this request for quote must be followed. Failure to provide all information to aid in the evaluation may be considered non-responsive. Offers that are non-responsive may be excluded from further evaluation and rejected without further notification to the offeror.

Quotes shall be fully executed and returned using an SF 18 or you may use your own quote format. Submit quotations to the office specified in this solicitation at or before the time specified in the solicitation. Email quotes are acceptable (preferred) and can be sent to Suzanne Garrett, email suzanne.garrett@noaa.gov.

At a minimum the contractor shall provide the following information:

a) Point of contact name, telephone and E-mail address.

b) Cage Code Number

c) SAM.gov Unique Entity ID

CAR 1352.215-72 INQUIRIES (APR 2010)

OFFERORS MUST SUBMIT ALL QUESTIONS CONCERNING THIS SOLICITATION IN WRITING (EMAIL) TO SUZANNE.GARRETT@NOAA.GOV. QUESTIONS SHOULD BE RECEIVED NO LATER THAN 4:00 P.M. MDT/MST, August 17 2022. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract.

(IX) FAR 52.212-2, EVALUATION – COMMERCIAL ITEMS (NOV 2021), applies to this acquisition. Offers will be evaluated based on price and the factors set forth in paragraph (a) the Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government. This is a lowest priced technically acceptable (LPTA) requirement evaluation of all associated quoted costs.

1. Price - Lowest Priced Technically Acceptable. (SCHEDULE (Indicate applicable Federal, State and local taxes)

2. Past Performance - Quotes shall include at least two CURRENT RELEVANT REFERENCES to the Offeror’s performance to provide the service being solicited.

References must include the company name and contact person’s name, phone number and email. The Government will use its discretion to determine the sources of past performance information used in the evaluation, and the information may be obtained from references provided by the Offeror, the agency’s knowledge of contractor performance, other government agencies or commercial entities, or past performance databases, and will be based on responsiveness, quality, and customer services. This will be a PASS/FAIL

Technical capabilities to be show in past performance and certifications as required in the location of work.

3. Provide a copy of your insurance. Do not purchase for this site specific unless you are awarded the contract.

4. Authorized reseller of brand, respond or attest in some written format.

5. Meeting delivery date which may be a PASS/FAIL. Please provide what your schedule would be.

A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after receipt, unless written notice of withdrawal is received before award.

(X) THE OFFEROR MUST SUBMIT A COMPLETED COPY OF THE PROVISION AT

FAR 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAY 2022) (DEVIATION 2020-11) (AUG 2020) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v)) of this provision.

(a) Definitions. As used in this provision— “Covered telecommunications equipment or services” has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended. “Sensitive technology”— Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3)of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business concern—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service connected, as defined in 38 U.S.C. 101(16).

Small business concern—

(1) Means a concern, including its affiliates that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

Small disadvantaged business concern, consistent with13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that—

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by—

(i) One or more socially disadvantaged (as defined at13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/ divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

Women-owned small business concern means a small business concern—

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

(b) (1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________.

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.] These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii). Check all that apply

(1) Small business concern. The offeror represents as part of its offer that it □is, □is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it □is, □is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it

□ is, □ is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, that it □is, □is not a small disadvantaged business concern as defined in 13 CFR124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is, □ is not a women-owned small business concern.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-

(i) It □ is, □ is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It □ is, □ is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: __________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-

(i) It □ is, □ is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It □ is, □ is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture:__________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________________________________

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that–

(i) It □is, □is not a HUBZone small business concern listed, on the date of this representation, on the List of qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes inownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and

(ii) It □ is, □ is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(d) Representations required to implement provisions of Executive Order11246- (1) Previous contracts and compliance.

The offeror represents that-

(i) It □ has, □ has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and

(ii) It □ has, □ has not filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that-

(i) It □ has developed and has on file, □ has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or

(ii) It □ has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 http://uscode.house.gov/ U.S.C. 1352).

(Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-Supplies, is included in this solicitation.)

(1) (i) The Offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product.

(ii) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products.

(iii) The terms "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies." (2) Foreign End Products: