2123403Y3390519001 SOW Large Floating Barge Crane Services (DEWERT).doc

Floating Barge Crane SOW

1. SCOPE

· Intent. Provide Large floating barge crane services for removal of (01) MK75 Gun System on Navy Ex-FFG 45 (DEWERT) at Philadelphia Navy Yard on 13 December 2022.

2. CONTRACTOR REQUIREMENTS

· 2.1 General. Large floating barge crane will be required for removal of MK75 gun systems due to mooring location of Ex-FFG 45 (DEWERT) which is between two other Ex-FFGs (HALYBURTON & KLAKRING). Larger crane will provide needed lifting capacity and weight requirements for the MK 75 Gun System and equipment. Recommend staging MK75 Shipping Fixture on barge crane to place the MK75 gun system into after removing from DEWERT. Then staging MK75 Gun and shipping fixture onto Constitution Ave for transport.

· 2.1.1 Large Barge Crane Company will be required to conduct multiple crane lifts for the below equipment during the 1 day evolution for removing MK75 Gun weapons systems off of Navy Ex-FFG 45 (DEWERT). CG Yard Baltimore will provide (4) Technicians for MK75 removal and (2) Riggers.

· 2.1.2 Large Barge Crane Company and CG Yard Baltimore will use Constitution Ave on Philadelphia Navy Yard as staging area for all trucks, equipment, Global Ops forklift services, barge crane operations, etc.

· 2.1.3 Large Barge Crane Company services will be conducted from Ex-FFG 45 (DEWERT) and Staging area on Constitution Ave.

Equipment to be lifted with crane:

· MK75 shipping fixture (1) – 16,400 lbs each

· MK75 lifting rig (1) – 2,500 lbs

· MK75 cover plate (1) – 500 lbs each

· MK75 gun system (1) – 15,876 lbs each

· MK75 shipping fixture, lifting rig, gun system (1) – 34,776 lbs each

· Various equipment for MK75 Gun system removal (barrel cooling panels, revolving magazine hardware, gun control panel, tools, job box, etc.).

The contractor must provide all necessary labor, equipment, materials, disposals and supervision to safely construct the elevated work platform listed in this statement of work. The Contractor must provide an action work plan, schedule, and construction methods with proposal. The Contractor shall comply with all Philadelphia Naval Shipyard and Occupational Safety and Health Administration (OSHA) requirements. Any deviations must be reported to the Global Services staff immediately. The Contractor shall coordinate crane inspection and approval from NAVFAC Crane Inspector at least 24 hours prior to evolution.

· 2.2 Schedule Period: Crane operations for the MK75 gun system removals will be conducted on 13 Dec 2022 between the hours of 8:00 am and 3:30 pm. If the completion date needs to be extended, a written explanation will be provided by the contractor 30 days prior to the completion date.

· 2.3 Hours of Operation: The normal working hours are from 8:00 A.M. to 3:30 P.M., Monday thru Friday, except Federal holidays or when the Government facility is closed, due to local or national emergencies, inclement weather, administrative closings or similar Government directed facility closings.

· 2.3.1 The contractor may be required to work outside of the normal working hours. Advance notice will be given, as much as practical. Extra costs will be incurred for crew personnel and tug boat fees.

· 2.4 Security Requirements: The Philadelphia Navy Yard is a controlled access area. All contractors and subcontractors performing work on this contract shall be escorted by a Global Ops Services Representative at all times. All Contractor employees are required to identify themselves with company identification on their hard hats and/or uniforms. Any Contractor employee, not following Philadelphia Navy Yard rules and regulations, will be removed from performance on this contract and may be barred from reentering the Philadelphia Navy Yard.

Contractor employees shall not enter restricted areas in accordance with Philadelphia Navy Yard security regulations or policies. Before Contractor employees can work at the Philadelphia Navy Yard Facility, the Contractor shall complete all required paperwork, security clearances, appropriate access, and COVID screening/questionnaire through Global Ops Services. Any Contractor employee with a criminal back ground must get prior authorization before they can gain access to Philadelphia Navy Yard Facility.

· 2.4.1 All personnel shall receive visitor’s passes and clearance from Global Ops Services located at Bldg 545. List of personnel needing access shall be provided to the Global Ops Services at least (24) hours prior to requiring access. Personnel will be required to provide full name, picture I.D. (valid driver’s license preferred), and date of birth. For non US citizen’s, a passport will be required. The following forms of IDS are authorized:

CAC

Foreign Passport containing appropriate visas

· TWIC

Green Cards

· Passport

- Drivers License

· MOST state IDs

· 2.5 Emergency Responses: Global Ops Services will provide security escort to all contractors while working in the Philadelphia Navy Yard. 24 hour first aid, spill response and fire protection is available. Injuries must be reported immediately and followed up with a written report to Global Ops Services.

· 2.6. Key Personnel: A list of key personnel that will be involved in each evolution will be required from Global Ops Services for accountability, access, and security purposes.

3. GOVERNMENT FURNISHED ITEMS AND SERVICES:

· 3.1. Utilities: The Philadelphia Navy Yard Facility will provide access, security, forklift services, compressed air, and electricity for the Contractor. The Contractor shall instruct employees in utilities conservation practices. The Contractor shall be responsible for operating in such a manner that precludes the waste of utilities.

· 3.2 Contractor owned vehicles or Government Vehicles will only be allowed on the Philadelphia Navy Yard facility to facilitate the flow of materials, supplies, or services to and from the job site. Routine operation or parking of privately owned and/or operated motor vehicles is not authorized within the Philadelphia Navy Yard without exception.

4. CONTRACTOR FURNISHED ITEMS, SERVICES AND RESPONSIBILITIES:

· 4.1 Equipment: The Contractor shall, throughout the performance of this contract, furnish all materials, equipment, and supplies necessary for contract performance, and not identified as government provided material. The Contractor shall provide all standard Personal Protection Equipment (PPE) in accordance with Occupational Safety and Health Administration (OSHA) standard including but not limited to hard hat, appropriate eye protection, steel-toed shoes, ear plugs.

· 4.1.1 In the event the Contractor creates an unsafe work environment and will cause yard work operations to cease, the Contractor will be held responsible and damages shall be assessed for the length of the work delay.

5. BILLING:

· Contractor will provide an invoice to CG Yard Baltimore after work is completed.

· Contractor will accept payment by Government funding.

· CG Yard Baltimore will pay Contractor via PR funds provided by PMS326 FMS in Program 90519.

6. SCHEDULE: 12-14 Dec 2022

· Day 1 (Monday 12 Dec) – CG Yard Technicians and Riggers travel to Philadelphia Naval Shipyard (PNS) and begin preps for removal on MK75 mount Ex-FFG 45 (DEWERT)). CG Yard Riggers will transport all removal equipment (Connex Box, MK75 Shipping Fixture, MK75 Lifting Fixture, Deck Cover Plate) from CG Yard to PNS and stage equipment on Constitution Ave. Forklift Services provided from Global.

· Day 2 (Tuesday 13 Dec) – CG Yard Technicians and Riggers remove MK75 mount from Ex-FFG 45 (DEWERT) using Large Barge Crane Company, CG Yard Riggers transport MK75 mount and shipping fixture to CG Yard. Forklift Services provided from Global

· Day 3 (Wednesday 14 Dec) – CG Yard Riggers transport remaining removal equipment (Connex Box) from Philadelphia PNS to CG Yard. Forklift services from Global. Travel Day back to CG Yard.

7. POCs:

Coast Guard Yard Project Coordinator: CWO Berlin Gabretti 410-636-3809 Coast Guard Yard Ordnance Shop Forman: Mr. John Driscoll 410-636-3883

Coast Guard Yard Ordnance Shop Planner: Mr. Harold Haney 410-636-3894 Coast Guard Yard Rigging Shop Forman: Mr. Brian Dash 410-636-3676 Global Ops – Mr. Joe McKee 215-897-6774 Inactive Ships – Mr. Chuck Rothwell 215-897-6771 NAVFAC Crane Inspector – Mr. Cherome Jackson 267-250-6887