CB-M_N30030.0.pdf

U.S. COAST GUARD

ASSET COMPUTERIZED MAINTENANCE SYSTEM

CUTTER BOAT MEDIUM

N30030.0

REV'D 12/31/13

ASSET NUMBER OPERATING ACTIVITY MAINTENANCE ACCOMPLISHED MAINTENANCE DUE

DATE ASSET HOURS DATE ASSET HOURS

MO DAY YEAR MO DAY YEAR

ZULU DATE ZULU TIME

MO DAY YEAR

ITEM 1

DUE

CMS CODE ACTION DESCRIPTION CEINUM

N30030 INSP/CLN FIRE SUPPRESSION SYSTEM CB-B000-001

SCHEDULED UNSCHEDULED

DISCREPANCIES FOUND: NO_____ YES_____

MAN HOURS: MK___.___DC___.___EM___.___ET___.___IT___.___GM___.___BM___.___FN___.___SN___.___ME___.___OTHER___.___

IF DISCREPANCIES ARE FOUND REMARKS ARE REQUIRED

TECHNICIAN'S

SIGNATURE

TECHNICIAN'S

ID

* ASTERISK INDICATES QA REQUIRED QA

REFERENCES:

NONE

REVIEWED

BY

LOG YN DATA

ENTRY

COMPLETED

CBM

CUTTER BOAT MEDIUM

N30030.0

REV'D 12/31/13

MK BM

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

DC IT

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

EM FN

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

ET SN

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

GM OTHER

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

CUTTER BOAT MEDIUM

N30030.0

REV'D 12/31/13

1 FIRE SUPPRESSION SYSTEM INSP/CLN

REFERENCES:

NONE

TOOLS/TESTEQUIPMENT:

NONE

EXPENDABLES:

Extinguisher, Fire, P/N: 466628, CAGE: 0J0S5, NIIN: 016123072 (If required)

CONSUMABLES:

Rag, Wiping, P/N: A-A-531, CAGE: 58536, NIIN: 002051711

A INSPECT/CLEAN

WARNING

OPENING THE POWER SOURCE CIRCUIT BREAKERS

MAY NOT DE-ENERGIZE ALL CABLES ENTERING THE

SWITCHBOARD. ALWAYS TEST FOR VOLTAGE PRIOR TO

STARTING MAINTENANCE. FAILURE TO COMPLY MAY

RESULT IN SERIOUS PERSONAL INJURY.

1. Remove fire extinguisher from bracket, (Refer to Figure 1).

2. Ensure locking pin is firmly in place.

3. Inspect pressure indicator.

a. Proceed to Step 1 A 5.a.(1) if pressure indicator reads outside the green area.

4. Ensure discharge nozzle is clean and free of obstructions.

NOTE: Year of manufacture is stamped at bottom of cylinder.

5. Check extinguisher manufacture date.

a. Remove fire extinguisher from service if six or more years have elapsed from the manufacture date.

(1) Dispose of unserviceable extinguisher in compliance with local, state, and federal regulations.

(2) Replace extinguisher with serviceable fire extinguisher, P/N: 466628.

6. Inspect and test extinguisher, as follows:

a. Inspect handle for tightness.

b. Inspect valve for loose fittings.

c. Inspect cylinder for corrosion, dents, and deformities.

NOTE: Take note of pressure indicator location prior to proceeding with the inversion test.

d. Perform an inversion test.

(1) Turn the extinguisher up and down five times.

(2) Compare pointer position on pressure indicator from the initial pressure indicator reading.

(3) Replace extinguisher with serviceable fire extinguisher if pressure indicator is outside the green band.

CUTTER BOAT MEDIUM

N30030.0

REV'D 12/31/13

(4) Dispose of unserviceable extinguisher IAW local, state, and federal regulations.

7. Inspect latching bracket for the following:

a. Tightness.

b. Corrosion.

8. Replace fire extinguisher bracket if damaged or broken.

9. Clean exterior of fire extinguisher, as follows:

a. Wipe exterior of fire extinguisher using a clean dry cloth, P/N: A-A-531.

10. Inspect fire port for obstructions and visible damage, (Refer to Figure 2 and Figure 3).

a. Wipe exterior of front facial surface of fire port using a clean dry cloth.

11. Install extinguisher into bracket, (Refer to Figure 1).

12. Record maintenance action by completing appropriate sign-off, adding pertinent remarks.

PORTABLE FIRE EXTINGUISHER

Figure 1

CUTTER BOAT MEDIUM

N30030.0

REV'D 12/31/13

LOCATION OF FIRE-PORT

Figure 2

FIRE-PORT

Figure 3