CB-M_L10012.0.pdf

U.S. COAST GUARD

ASSET COMPUTERIZED MAINTENANCE SYSTEM

CUTTER BOAT MEDIUM

L10012.0

REV'D 01/15/14

ASSET NUMBER OPERATING ACTIVITY MAINTENANCE ACCOMPLISHED MAINTENANCE DUE

DATE ASSET HOURS DATE ASSET HOURS

MO DAY YEAR MO DAY YEAR

ZULU DATE ZULU TIME

MO DAY YEAR

ITEM 1

DUE

CMS CODE ACTION DESCRIPTION CEINUM

L10012 REPLACE HULL ANODES CB-B000-001

SCHEDULED UNSCHEDULED

MAN HOURS: MK___.___DC___.___EM___.___ET___.___IT___.___GM___.___BM___.___FN___.___SN___.___ME___.___OTHER___.___

REMARKS:

TECHNICIAN'S

SIGNATURE

TECHNICIAN'S

ID

* ASTERISK INDICATES QA REQUIRED QA

REFERENCES:

NONE

REVIEWED

BY

LOG YN DATA

ENTRY

COMPLETED

Distribution Statement D: Distribution authorized to the DHS/CG/DoD and their contractors Administrative/Operational use, 12/24/13. Other requests shall be referred to the appropriate asset product line.

WARNING: This document contains technical data whose export is restricted by the Arms Export-Control Act (Title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C. App 2401 et. seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

DESTRUCTION NOTICE: For classified documents, follow the procedures in DoD 5200.22-M, National Industrial Security Program Operating Manual, Section 5-705 or DoD 5200.1-R, Information Security Program Regulation, Chapter VI, Section 7. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

CBM

CUTTER BOAT MEDIUM

L10012.0

REV'D 01/15/14

MK BM

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

DC IT

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

EM FN

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

ET SN

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

GM OTHER

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

CBM DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 2 of 5

CUTTER BOAT MEDIUM

L10012.0

REV'D 01/15/14

1 HULL ANODES REPLACE

REFERENCES:

COMDTINST 9077.1 (series) Equipment Tag-Out Procedure

TOOLS/TESTEQUIPMENT:

NONE

EXPENDABLES:

Anode, Corrosion Preventive, P/N: CMT21, CAGE: 3AT71, NIIN: 200021161 (2) Nut 1/4-20 SS, P/N: 1170710, CAGE: 3AT71, NIIN: N/A (4) Socket Head Cap Screw, 1/4-20 x 1 SS, P/N: 1170005, CAGE: 0TU57, NIIN: N/A (4) Washer, Lock, 1/4 SS, P/N: 1171063, CAGE: 0TU57, NIIN: N/A (4)

CONSUMABLES:

Anti-Seize Compound, P/N: NSBT-16N, CAGE: 5W425, NIIN: 001050270

A PRELIMINARY STEPS

WARNING

VARIOUS STEPS IN THIS PROCEDURE EMPLOY ITEMS ON

THE HAZARDOUS MATERIALS LIST. BEFORE EXECUTING

THIS MPC, REFER TO THE APPLICABLE MSDS/SDS FOR

FULL SAFETY AND HANDLING PROCEDURES.

WARNING

ENSURE EQUIPMENT IS PROPERLY TAGGED OUT. FAILURE

TO COMPLY MAY RESULT IN SERIOUS PERSONAL INJURY

OR DEATH.

NOTE: Boat must be out of the water to replace the hull anodes.

NOTE: The two hull anodes are located on both sides of the bottom of the transom.

1. Complete Red Danger Tags IAW COMDTINST 9077.1 (series).

B REMOVE

1. Remove the starboard hull anode, as follows, (Refer to Figure 1 and Figure 2):

a. Remove the two 1/4-20 nuts from the mounting bolts.

(1) Discard the two nuts.

b. Remove the two 1/4 inch lock washers.

(1) Discard the lock washers.

c. Remove the two 1/4-20 x 1 inch mounting bolts from the anode.

(1) Discard the bolts.

d. Remove the anode from the transom.

2. Remove the port hull anode, (Refer to Step 1 A 1.).

CBM DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 3 of 5 http://www.uscg.mil/directives/ci/9000-9999/CI_9077_1C.pdf

CUTTER BOAT MEDIUM

L10012.0

REV'D 01/15/14

C INSTALL

1. Install the new starboard anode, as follows:

WARNING

AVOID EYE AND SKIN CONTACT WITH ANTI-SEIZE

COMPOUND. WASH EXPOSED SKIN THOROUGHLY

AFTER HANDLING. FAILURE TO COMPLY MAY RESULT IN

PERSONAL INJURY.

a. Apply anti-seize compound, P/N: NSBT-16N, to the threads of the new 1/4-20 x 1 inch bolts, P/N:

1170005.

b. Position the anode, P/N: CMT21, onto the transom mounting surface.

c. Insert bolts through anode and transom.

d. Place lock washers, P/N: 1171063, onto bolts.

e. Screw nuts, P/N: 1170710, onto bolts hand-tight.

NOTE: There is no torque value required, do not over tighten.

(1) Tighten the two mounting bolts securely.

2. Discard the old anode(s) IAW local, state, and federal regulations.

3. Install new port hull anode, (Refer to Step 1 B 1.).

D FINAL STEPS

1. Remove Red Danger Tags IAW COMDTINST 9077.1 (series).

2. Store, segregate, or dispose of hazardous materials IAW local, state, and federal regulations.

3. Record maintenance action by completing the appropriate sign-off, adding pertinent remarks.

CBM DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 4 of 5

CUTTER BOAT MEDIUM

L10012.0

REV'D 01/15/14

HULL ANODE (STBD)

Figure 1

HULL ANODE (PORT)

Figure 2

CBM DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 5 of 5