21-01045 Statement of Work.pdf

S

Statement of Work: Diamond wafer ion traps 1 Last Saved: 3/10/2021 3:25 PM Double-click on for further assistance.

Use this Statement of Work document to purchase an item and/or item-related services.

TITLE: Diamond wafer ion traps Requesting Lab/Division/Group: PML, Div. 688, Ion Storage Group (10) Requisition Number: NB688000-21-01045

Statement of Need We require quantity four ion traps that are laser-cut from high-thermal-conductivity diamond and patterned with gold electrodes.

Items and/or item-related services Section Requirements Related Information Items/Service (required)

Quantity four diamond wafer ion traps as specified in the attached CAD drawing SphericalTrap_v1_20200212.pdf, and meeting the following technical requirements:

1. The traps must be laser-cut from 0.320 mm thick, high thermal-conductivity diamond with a tolerance of 5 microns for the central cutout and a taper of less than 2 degrees.

2. Gold electrodes are to be patterned onto the indicated areas with a thickness of 5 microns on the front and back surfaces. The inner edges must also be sputtered as indicated. Adhesion layers must not include magnetic materials.

3. Electrical isolation between all pairs of electrodes must be greater than 550 MOhm at an applied voltage of 1000 V with both polarities. Carbon residue from the laser machining process, which can lead to electrical shorting, must not be present in locations between electrodes.

4. Gold patterning on the front and back surfaces must be aligned with respect to each other and with respect to the central cutout with a tolerance of 25 microns.

5. The traps will be used in an ultra-high vacuum (UHV) chamber with a pressure of less than 10^-11 torr. The traps must be UHV clean (i.e., no dust, hydrocarbons, or polymers present on the surfaces) and shipped in a UHV clean container.

☐ See attached document for detailed specifications

Enter related information here

Statement of Work: Diamond wafer ion traps 2

Shipping & Delivery ☐ N/A

Delivery by 10 weeks ARO ☒ Phased delivery is acceptable ☐ Software on USB / disk required ☐ Software electronic delivery acceptable Email address for software delivery

Installation ☒ N/A

Installation requirements ☐ Site visit recommended

Inspection and Acceptance ☐ N/A

Inspection is excpected to take 7 business days ☐ Government acceptance expected to take longer than 7 days

Warranty ☐ N/A

Base Manufacturer Warranty is acceptable If you require an Extended Manufacturer Warranty, describe the warranty requirements.

Period Length:Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Training ☒ N/A

Training requirements Enter related information here

Maintenance

☒ N/A

Describe your maintenance requirements.

☐See attached document for detailed maintenance specifications Period Length: Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Repair ☒ N/A

Choose an item.

Describe your repair requirements.

Period Length: Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Government Furnished Material / Equipment ☒ N/A

List any government furnished material/equipment here

Enter related information here

Travel ☒ N/A

Describe any travel requirements Vendor: To the maximum extent possible, include as part of appropriate sections above (maintenance, repair, etc.).

Otherwise, it will be a separate line item, reimbursable per the Federal Travel Regulation.

Statement of Work: Diamond wafer ion traps 3

Statement of Need