20Q0247_att1.pdf

SWXR203349 4/28/2020

STATEMENT OF WORK

FOR

MASTERCAM SOFTWARE, HARDWARE, AND TRAINING

Requirement #: SWXR203349

28 April 2020

Distribution Statement A:

Approved for public release: Distribution Unlimited.

STATEMENT OF WORK

FOR

MASTERCAM SOFTWARE, HARDWARE, AND TRAINING

1. SCOPE

The Statement of Work (SOW) defines the requirement for Mastercam software, hardware and training to support a Machine Shop located at Naval Surface Warfare Center, Crane IN. The Mastercam software is used on various multi axis computer numerical control (CNC) milling machines, CNC lathes, and CNC electric discharge machine (EDM). The software shall be a non-internet connected (stand-alone) single graphical user interface (GUI) that will import various CAD files including SoildEdge, and post out Numerical Control (NC) programs to be used on but are not limited to, Hurco VTXU, 5-Axis, Hurco 3-Axis Mill, Hurco TMX8MY lathe, and Mitsubishi FA20S wire EDM.

2. APPLICABLE DOCUMENTS

2.1 Government Documents

None

2.2 Non-Government Documents

None

3. MASTERCAM SOFTWARE REQUIREMENTS

3.1 Mastercam Software Requirements – Base Year

The Government requires the following software licenses and quantities for the Machine Shop equipment located in building 122.

Mastercam 2020 Mill 3D - Quantity: 2 license seats, 12 months of maintenance & support services Mastercam 2020 Multiaxis Add-On – Quantity: 1 license seat, 12 months of maintenance & support services Mastercam 2020 Lathe – Quantity: 1 license seat, 12 months of maintenance & support services Mastercam 2020 Wire – Quantity: 1 license seat, 12 months of maintenance & support services Mastercam CimcoEdit Pro – Quantity 4 license seats for the machinery equipment below

a) Hurco VTXU, 5-Axis post processor and Machine Simulation

b) Hurco 3-Axis Mill post processor

c) Hurco TMX8MY post processor

d) Mitsubishi FA20S post processor

The software licenses shall include user guidebooks, installation instructions, user manuals, electronic system files, and any other documentation necessary for proper system operation. The contractor shall provide 12 months of on-line telephone maintenance and support call services.

3.2 Mastercam Software Requirements – Option Year 1

The contractor shall provide the same licenses and coverage as called out in the Base Year requirement for another 365 days for Option Year 1. The Option Year 1 requirement shall be priced separately. The Government may or may not exercise the option year, based on equipment condition, Machine Shop workload, or available funds. The contractor is not authorized to exercise the Option Year requirement unless a contract modification is provided from the Contract Officer.

3.3 Mastercam Software Requirements – Option Year 2

The contractor shall provide the same licenses and coverage as called out in the Base Year requirement for another 365 days for Option Year 2. The Option Year 2 requirement shall be priced separately. The Government may or may not exercise the option year, based on equipment condition, Machine Shop workload, or available funds. The contractor is not authorized to exercise the Option Year requirement unless a contract modification is provided from the Contract Officer.

3.4 Mastercam Software Requirements – Option Year 3

The contractor shall provide the same licenses and coverage as called out in the Base Year requirement for another 365 days for Option Year 3. The Option Year 3 requirement shall be priced separately. The Government may or may not exercise the option year, based on equipment condition, Machine Shop workload, or available funds. The contractor is not authorized to exercise the Option Year requirement unless a contract modification is provided from the Contract Officer.

3.5 Mastercam Software Requirements – Option Year 4

The contractor shall provide the same licenses and coverage as called out in the Base Year requirement for another 365 days for Option Year 4. The Option Year 4 requirement shall be priced separately. The Government may or may not exercise the option year, based on equipment condition, Machine Shop workload, or available funds. The contractor is not authorized to exercise the Option Year requirement unless a contract modification is provided from the Contract Officer.

3.6 Mastercam Computer Workstation Hardware Requirements

The Government requires a computer workstations that will be used as a controller for the Machine Shop Equipment called out in the Base Year. Quantity: 1 each, computer workstation

The Government requires a computer workstations that meets or exceeds the following minimum technical specifications;

Intel Processor (I7 or I9) Ram – 16GB or more Video Card – NVIDIA Quadro Graphics card Hard Drive – Solid State Drive (SSD), 1Gig or more Monitors – 24 inch display, Dual displays Keyboard – USB wired Mouse – 3dconnexion SpaceMouse Warranty – 3 years support, with next Business Day onsite support service

3.7 Mastercam On-Site Training – 2D/3D Mill Software

The contractor shall conduct equipment set-up training, operator/user training, and maintenance/troubleshooting training related to the 2D/3D Mill Software. The training will be at NSWC Crane, Indiana in building 122. The class will have up to six (6) students and the contractor shall provide laptops for the maximum of six (6) students.

The training shall be no more than five (5) days in duration. The training shall cover both basic and intermediate levels depending on the knowledge of the students. The training shall include all necessary handout materials and manuals for a comprehensive understanding of the overall Mastercam software and system operation. The contractor shall coordinate the scheduling of the training class with the Contracting Officer or the assigned Technical Government point of contact via email. The training dates will be determined prior to a visit to the Command. The contractor shall follow all Security and Safety rules and regulation while on the Government facility. The contractor shall provide on-line telephone support for one (1) year after completion of the training session. The on-line telephone support shall cover any technical equipment issues or software problems that may occur.

3.8 Mastercam On-Site Training – Multi-Axis Toolpaths

The contractor shall conduct equipment set-up training, operator/user training, and maintenance/troubleshooting training related to the Mastercam Multi-Axis Toolpaths Software. The training will be at NSWC Crane, Indiana in building 122. The class will have up to six (6) students and the contractor shall provide laptops for the maximum of six (6) students. The training shall be no more than three (3) days in duration. The training shall cover both basic and intermediate levels depending on the knowledge of the students. The training shall include all necessary handout materials and manuals for a comprehensive understanding of the overall Mastercam software and system operation. The contractor shall coordinate the scheduling of the training class with the Contracting Officer or the assigned Technical Government point of contact via email. The training dates will be determined prior to a visit to the Command. The contractor shall follow all Security and Safety rules and regulation while on the Government facility. The contractor shall provide on-line telephone support for one (1) year after completion of the training session. The on-line telephone support shall cover any technical equipment issues or software problems that may occur.

3.9 Mastercam On-Site Training – Lathe Essentials

The contractor shall conduct equipment set-up training, operator/user training, and maintenance/troubleshooting training related to the Mastercam Lathe Essentials Software with C-axis, Y-axis, and Sub-Spindle Part Transfer.

The training will be at NSWC Crane, Indiana in building 122. The class will have up to six (6) students and the contractor shall provide laptops for the maximum of six (6) students. The training shall be no more than four (4) days in duration. The training shall cover both basic and intermediate levels depending on the knowledge of the students. The training shall include all necessary handout materials and manuals for a comprehensive understanding of the overall Mastercam software and system operation. The contractor shall coordinate the scheduling of the training class with the Contracting Officer or the assigned Technical Government point of contact via email. The training dates will be determined prior to a visit to the Command. The contractor shall follow all Security and Safety rules and regulation while on the Government facility. The contractor shall provide on-line telephone support for one (1) year after completion of the training session. The on-line telephone support shall cover any technical equipment issues or software problems that may occur.

3.10 Mastercam On-Site Training – Wire Training

The contractor shall conduct equipment set-up training, operator/user training, and maintenance/troubleshooting training related to the Mastercam Wire Software. The training will be at NSWC Crane, Indiana in building 122. The class will have up to six (6) students and the contractor shall provide laptops for the maximum of six (6) students.

The training shall be no more than one (1) day in duration. The training shall cover both basic and intermediate levels depending on the knowledge of the students. The training shall include all necessary handout materials and manuals for a comprehensive understanding of the overall Mastercam software and system operation. The contractor shall coordinate the scheduling of the training class with the Contracting Officer or the assigned Technical Government point of contact via email. The training dates will be determined prior to a visit to the Command. The contractor shall follow all Security and Safety rules and regulation while on the Government facility. The contractor shall provide on-line telephone support for one (1) year after completion of the training session. The on-line telephone support shall cover any technical equipment issues or software problems that may occur.

3.11 Security

The contractor shall comply with the requirements of NSWCCRANEINST 5510.1A and NSWCCRANEINST 5530.1D Security documents. Performance on this contract will “not” require contractor employees to have access to classified information. Although, all contractor personnel shall follow Government Security regulations while on the facility.