2027-374_Attachments.pdf

Rev. April 2025

ATTACHMENT A: RESPONDER DECLARATIONS

The undersigned certifies, to the best of his or her knowledge and belief, that:

A. Response Contents. The information provided is true, correct, and reliable for purposes of evaluation for potential contract award. The submission of inaccurate or misleading information may be grounds for disqualification from the award as well as subject the Responder to suspension or debarment proceedings as well as other remedies available by law

B. Authorized Signature. This Declaration is signed by the appropriate person(s), with the authority to contractually bind the Responder, as required by applicable articles, bylaws, resolutions, minutes, and ordinances.

C. Non-Collusion Certification.

1. The Proposal has been arrived at by the Responder independently and has been submitted without collusion and without any agreement, understanding or planned common course of action with any other vendor designed to limit fair or open competition; and

2. The contents of the Response have not been communicated by the Responder or its employees or agents to any person not an employee or agent of the Responder and will not be communicated to any other individual prior to the due date and time of this Solicitation. Any evidence of collusion among Responders in any form designed to defeat competitive responses will be reported to the Minnesota Attorney General for investigation and appropriate action.

D. Organizational Conflicts of Interest. To the best of Responder’s knowledge and belief, and except as otherwise disclosed, there are no relevant facts or circumstances which could give rise to an organizational conflict of interest.

An organizational conflict of interest exists when, because of existing or planned activities or because of relationships with other persons,

1. a vendor is unable or potentially unable to render impartial assistance or advice to the State;

2. the vendor’s objectivity in performing the contract work is or might be otherwise impaired; or

3. the vendor has an unfair competitive advantage.

If after award, an organizational conflict of interest is discovered, an immediate and full disclosure in writing must be made to the State’s Chief Procurement Officer which must include a description of the action which the contractor has taken or proposes to take to avoid or mitigate such conflicts. If an organizational conflict of interest is determined to exist, the State may, at its discretion, cancel the contract. In the event the Contractor was aware of an organizational conflict of interest prior to the award of the contract and did not disclose the conflict to OSP, the State may terminate the contract for default. Organizational conflicts of interest terms apply to any subcontractors for this work.

E. Copyrighted Material Waiver. By signing its Response, the Responder certifies that it has obtained all necessary approvals for the reproduction and distribution of the contents of its response.

By submitting a response in SWIFT, Responder acknowledges and certifies compliance with all applicable requirements indicated above.

ATTACHMENT B: PRICING

1. Pricing.

A price schedule document will not be used for this solicitation. Responders must enter their bid price(s) in SWIFT at the unit line level. If a responder needs assistance with entering their proposal, they may contact the Vendor Assistance Help Desk at (651) 201-8100, option #1, and then option #1 again.

2. Alterations or Erasures. The State reserves the right to reject a response containing an alteration or erasure of any price used to determine the lowest responsible responder unless the alteration or erasure is done in a manner that is clear and authenticated by an authorized representative of the Responder. An acceptable way to make an alteration or erasure is to cross out the price, print the correction in ink adjacent to it, and have an authorized representative of the Responder initial and date that correction.

ATTACHMENT C: INTENTIONALLY LEFT BLANK

ATTACHMENT D: ADDITIONAL INFORMATION

Complete the following Bid Factors in SWIFT:

1. Contractor’s Contact Information. Provide the contact information for the representative responsible for the management of the contract and the representative receiving purchase orders.

2. Prompt Pay Discount. Enter any prompt pay discounts you are offering.

3. Service or Completion Date. Responder must meet the service or completion dates as stated in the solicitation.

ATTACHMENT E: VENDOR QUALIFICATIONS FORM

2027-374 Owen-Hinz WMA Winter Brush Mowing

VERSION: Original

This Vendor Qualification Form must be submitted with your solicitation response. A solicitation response received without this form, or with an outdated version, may be rejected. Prime contractors are responsible for checking all addenda for the final version of this form.

Each responder must answer every question and provide all information requested on this form. Failure to meet this requirement may result in the rejection of the entire solicitation response as non-responsive.

The State (or its representative) reserves the right to clarify the required qualification information submitted on this form before an award is made. The solicitation response will be rejected if qualifications are not met.

Qualification Requirements

1. Responder has substantially completed, as a prime contractor not a subcontractor, the work for at least 1 written and verifiable contract since August 1, 2023, for mechanical brush mowing of similar scope to the project described in this solicitation. This contract must have had a project size of 25 acres or greater

Fill in the required information for your previous projects relating to Qualification Requirement #1:

*Property Owner and Contact Person:

Contact Person Phone #: Size of Project (Acres):

Dollar Amount of Contract: Substantial Completion Date:

Contract substantially completed under (check one):

☐ Current Company Name ☐ Previous Company Name

*Property Owner:

Property Owner Contact Person: Contact Person’s Telephone #:

Dollar Amount of Contract: Substantial Completion Date:

Contract substantially completed under (check one):

☐ Current Company Name ☐ Previous Company Name

*The term “Property Owner” means the person or entity identified as the owner of the property where the work referenced for Qualification Requirement #1 was performed.

The State (or its representative) reserves the right to contact the references listed above for Qualification Requirement #2 or to request the Responder to provide additional reference projects for review. The solicitation response will be rejected if the State, in its sole discretion, receives information that indicates the responder is non-responsible. Information considered includes, but is not limited to: 1) project milestones (meeting substantial and final completion dates); 2) communication with project owner and subcontractors; 3) on-site supervision; 4) coordination of subcontractors; 5) violation of Minnesota prevailing wage law; and 6) nonpayment of subcontractors.

2. Has your Company been found in default or had a contract terminated for cause in the last 36 months?

It is required that your company has not had this occur.

NOTE: If this question is answered as “yes”, your solicitation response will be rejected.

☐ YES ☐NO

Rev. 12/19 Page 6 of 8

3. Has your Company received from OSHA any willful or repeated safety citations for which a final order has been issued within the last 36 months?

It is required that your company has not had this occur.

NOTE: If this question is answered as “yes”, your solicitation response will be rejected.

☐ YES ☐NO

Certification

By signing this form, I certify the information provided is complete and accurate.

Authorized Signature:____ Date:

Printed Name: Telephone:

Company Name: Title:

Rev. July 2023

ATTACHMENT F: EQUIPMENT AND OPERATOR EXPERIENCE FORM

2027-374 Owen-Hinz WMA Winter Brush Mowing

Equipment Specifications:

Required equipment will consist of a rubber tracked skid steer (min. 100 gross engine HP, 35.0 gallon per minute, gpm, hydraulic flow to cutting head), or a tracked crawler (min. 135 gross engine horsepower) or a rotary axe (min. 180 gross engine horsepower) equipped with tracks or high flotation tires or a combination thereof.

Due to the variability of densities and size of stems of willow, alder, and other brush species on this site, the contractor must use a mower attachment(s) that is capable of effectively mowing/mulching a wide variety of differently sized material. DNR recommends Contractor use tracked skid steers. Utilize both heavy duty rotary brush mowers (i.e. Davco or equivalent) and drum style mulching mowers (i.e. Fecon or equivalent) for this project. The heavy-duty rotary mowers will likely work best on woody vegetation with basal stem diameters 2.0 inches and less whereas the drum style mulching mowers will likely work best on the larger woody vegetation stands with basal stem diameters of 2.0 inches and greater. The heavy-duty rotary mower or drum style mulcher must be equipped with blades or cutting teeth capable of effectively cutting/mulching all diameters of woody vegetation from the small flexible to the larger rigid material.

SPECIFY EQUIPMENT TO BE USED ON THIS PROJECT BELOW:

MAKE/MODEL – MACHINE 1 ___________________________________________

HP RATING______________________________________________

HYDRAULIC FLOW CAPACITY________________________________

CUTTING/MULCHING ATTACHMENT MAKE/MODEL(S):

MAKE/MODEL – MACHINE 2 (optional) ____________________________________

HP RATING______________________________________________

HYDRAULIC FLOW CAPACITY________________________________

CUTTING/MULCHING ATTACHMENT MAKE/MODEL(S):

OPERATOR EXPERIENCE:

The operator(s) must have a minimum of 250 hours of experience in operating the type of equipment to be used on the project.

NAME OF OPERATOR 1___________________________________

ESTIMATED HOURS OPERATING EXPERIENCE ____________________

NAME OF OPERATOR 2___________________________________

ESTIMATED HOURS OPERATING EXPERIENCE ____________________

Rev. July 2023

Certification

By signing this form, I certify the information provided is complete and accurate.

Authorized Signature: __________________________________Date: ____________________________________

Printed Name: Telephone:

Company Name: Title: