20240423_FloodMitigationPumps_Sources_Sought.docx
DOCX document 18 KB Posted
- Solicitation number
- W912EK24XPUMP
About this file
This document is a Sources Sought notice for self-priming, self-powered flood water abatement or mitigation pumps in sizes from 3-inches to 18-inches in diameter. The U.S. Army Corps of Engineers, Rock Island District is conducting market research to determine the acquisition strategy for this requirement. The government is seeking information from qualified firms with NAICS code 33391 - Pump and Compressor Manufacturing. The pumps must meet the ANSI/FM 2510-2020 standard for flood abatement equipment and be capable of delivering performance requirements such as self-priming, solids handling, and extended dry operation. Pump sizes required range from 3x3 inches to 24x18 inches, with smaller pumps to be mounted on wheeled trailers and larger ones on trailers or skid bases. The government requires the pumps to have remote monitoring capabilities and be accompanied by suction and discharge hoses. Responses are due by May 9, 2024 at 10:00 AM Central Time and should include company information, small business status, and capability to meet the stated requirements.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sources Sought Self-Priming, Self-Powered Flood Water Abatement or Mitigation Pumps
Seeking sources that have a self-priming, self-powered flood abatement or mitigation pumps in sizes from 3-inches to 18-inches in diameter that have been tested for American National Standard for Flood Abatement Equipment, ANSI, FM 2510-2020. Sources shall have the ability to arrange delivery anywhere in the Continental United States. Sources should provide the supporting locations that can assist with operation or maintenance when deployed for flood water abatement within the United States.
Horizontal self-priming, self-powered centrifugal type flood water abatement or mitigation pumps that shall have the ability to fulfil the requirements listed below:
- Self-Powered using diesel engine
- Provide the engines models based on each pump size.
- Dry Self-Priming to a vacuum up to 28-Inch Hg or suction lifts up to 25 ft
- Pump sizes (inches) that may be purchase. Provide specifications for the following pump sizes:
- 3x3 inches
- 4x4 inches
- 6x6 inches
- 8x8 inches
- 10x10 inches
- 12x12 inches
- 18x18 inches
- 24x18 inches
- Pump and power source assembly are a combined unit on a trailer.
- Pumps less than and equal to 8x8 inches are mounted to a wheeled trailer.
- Pumps larger than 10x10 inches are on a wheeled trailer or trailer with a skid base.
- Pump assembly has remote monitoring system and location capability on an as-needed basis.
- Pumps assembly meet or exceed American National Standard for Flood Abatement Equipment, ANSI, FM 2510-2020 standard.
- Provide certified testing has occurred showing the pump assembly model(s) meets performance requirements as set forth in ANSI/FM 2510-2020.
- Pump assemblies less than 18x18 will be delivered with the following using Bauer Type B connections. Provide information on hoses available.
- Three (3) 10-foot semi-flexible suction hoses.
- Three (3) 50-foot flexible discharge hoses.
- A 45-degree connection.
- A 90-degree connection
- Debris Filter connection
- Pumps shall be capable of passing solids with a minimum sphere size without damage to the pump unit.
- Pumps shall be capable of operating in the dry condition for periods up to 24 hours without resulting in damage to the pumps.
File details come from the government source that posted it. Updated .