2024 SOW for VA Police Protective Equipment_Updated.pdf

Statement of Work Police protective gear

1. Scope of supplies to be provided

The contractor shall provide high quality, meets, or exceeds National Institutes of Justice (NIJ) standard where applicable police protective gear to protect VA Police Officers while encountering elevated threats.

Items to be shipped to:

VA Northern California Health Care System

10535 Hospital Way (07B)

Mather, CA 95655

Items:

1.1 Body armor, Hard plates (front and back) approximately 10 inches x 12 inches in size, National Institutes of Justice (NIJ) standards level III rifle plate, NIJ .06. Quantity (90) pieces (1) front plate and (1) rear plate to outfit a total of 45 persons. Thickness will be less than 1.10 inches, plate will be curved, constructed of composite. Ammunition rounds defeated 7.62mm x 51mm(M80), 7.62mm x 39mm PS Ball (MSC), 5.56 x 45mm (M193):

10x12 inch plate will weigh no more than 2.4 lbs. Plates will be tapered towards the top, sometime referred to as “shooter’s cut”.

Quantity (90) pieces (1) front plate and (1) rear plate to outfit a total of 45 persons.

1.2 Body armor carrier side pouch for 6-inch x 8-inch hard plates. Navy blue nylon to match with body armor plate carrier supplied in item # 1.3. Same material and same color as Body armor plate carrier supplied in item # 1.3. These side pouches to have attaching device/ mechanism to attach to body armor plate carrier supplied in item # 1.3. Constructed of 500 denier nylon.

Quantity: 90 side pouches to outfit 45 persons (2 per person)

1.3 Body armor plate carriers, to fit 10-inch x 12 in shooters cut body armor. Navy blue in color with black mole connectors, with Velcro attachments for Police ID, “Police” ID on front and back. White letters approximately 2 inches tall. “Police” in white letters, black background, Velcro attachment. The vest should have available side plates to be supplied in item # 1.2.

Quantity: 45

1.4 Lightweight rifle shield, ballistic material: hybrid composite, approximately 20 inches x 30 inches, NIJ level III, resistant to rifle rounds- 7.62 x 39-mm, 123-grain PS Ball, 7.62 x 51mm

147gr M80, 5.56 x 45-mm, 55-grain M193 Ball rifle round resistant, base shield not to weigh more than 17.9 lbs., view port, tactical light, police identification decals on outward facing side.

Quantity: 7

1.5 Level IIIA tactical helmets, high cut, black, Kevlar construction, meets NIJ 0106.01 standard, fragmentation standard MILSTD 662f. Individual sizes to be selected: Small, medium, large, extra-large to be updated before delivery. * Contact before shipment.

Quantity: 45 total

17 - large

27 - medium

1 extra large

Medium

a. Circumference - 21.9" to 22.7"

b. Hat Size - 6 7/8 - 7 1/8 Large

c. Circumference - 22.7" to 24"

d. Hat Size - 7 1/4 - 7 3/8 XLarge

e. Circumference - 24" to 26"

f. Hat Size - 7 1/2 to 7 3/4

1.6 Body armor hard side plates, 6-inch x 8inch plates, NIJ level III, resistant to rifle rounds-

7.62 x 39-mm, 123-grain PS Ball, 7.62 x 51mm 147gr M80, 5.56 x 45-mm, 55-grain M193

Ball rifle round resistant, side plate to match or be made to work with armor carrier in item

# 1.3 and plate carrier side pouches in item # 1.2/.

Quantity: 45 sets of 2 to outfit 45 persons.

1.7 Stiff folding patrol shields, lightweight, NIJ Level IIIA, resistant to common pistol rounds of ammunition, foldable Kevlar composite shield. (Shield is not to be a blanket or similar material). Folding shield to be constructed of a material that is stiff and lightweight and facilitates an officer unfolding the shield, holding on to handles building into the back of the shield. Approximately 29 inches wide, x 31.5 inches tall, weighs 13.5 lbs., include large duffle bag to store shield in. Insignia: decals POLICE.- see pictures attached.

Quantity :9

Examples:

This type of product that is not stiffend and curved is not sufficient.