Updated - PWS New Boat and Trailer for Amistad Field Office 002.pdf
PDF 2 MB Posted
- Attached to
- Boat with Trailer
- Solicitation number
- 20223201012
About this file
This document includes a performance work statement and related federal contract opportunity solicitation. The performance work statement specifies requirements for a new work boat, pilot house, and associated equipment for the Amistad Field Office of the International Boundary and Water Commission. Key requirements include an aluminum hull, self-bailing decks with lockable storage compartments, safety railings, cleats, durable seats, bilge pumps, windows and a door for the pilot house. The solicitation seeks quotes for a boat and trailer meeting the specifications, with a delivery deadline of 300 calendar days. The solicitation number is 20223201012 and is open only to small businesses with a revenue threshold of $35 million. Quotes are due by March 23, 2022 and shall be emailed to the point of contact listed. The award will be made to the lowest priced technically acceptable offer.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Specifications New Boat and Trailer for Amistad Field Office 002.pdf | ||
| Price Sheet.docx | DOCX document | |
| Applicable Clauses and Provisions.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
USIBWC Amistad Field Office
Suppy of New Work Boat
Val Verde County, Texas
D. All decks shall be self-bailing and provide sufficient water egress. There will be two
6' long, lockable storage compartments, suitable for seating, provided on each side of the forward bow deck.
E. An air tight/pressurized so that the boat does not get water inside the false floor due to condensation that does not affect the flotation of the boat. The floor needs to be a raised self-bailing floor with scuppers.
F. There shall be 1 ¼" to 1 ½" Schedule 40 pipe safety railings installed 6" above gunnel from dive doors, forward 72". The boat shall also be fitted with Eight (8) 10" welded aluminum cleats.
G. Deck structure and component material shall be industry standard aluminum alloy with adequate thicknesses meeting industry and regulatory standards, fully welded to the hull and all deck height transverse bulkheads and longitudinal girders to contribute to the strength of the hull. Floor is supported by 2x2 square tubing.
H. The boat shall be fitted with 3" - 4" Duramax D shaped rub rail along the full length of the boat at the gunnel height.
I. There shall be at least three (3) 2000GPH automatic bilge pumps. Two pumps shall be located at the transom, and one at the forward end of the delta pad.
2.2 Pilot House
A. The pilot house shall be full-width, fully enclosed, industry and regulatory standard aluminum alloy welded construction. The thickness shall meet industry and regulatory standard but shall not be less than 3/16'.
B. The pilot house shall have an interior clearance height not less than 72", and shall be equipped with a windshield, two sliding windows on the sides, one fixed window on the aft wall, and one hinged door on the forward side.
C. Material for the windshield and windows shall be tempered safety glass to industry and regulatory standards. The windshield shall be fitted with heavy-duty windshield wipers and two fans to circulate air around windshield for ventilation and/ or defrost.
D. The Pilot house shall be fitted with two Bentley severe duty seats with swivel,, interior & exterior grab rails, four overhead 12V red/white LED dome lights, an
USI BWC Am is tad Field Office
Suppy of New Work Boat
Val Verde County, Texas
2.9 Electronics
At a minimum, the boat electronics shall include:
A. VHF Radio.
B. Multifunction High resolution In-Plane Switching (IPS) Displays including OPS and
Engine monitors.
2.10 Delivery:
E. The complete vessel shall be delivered FOB Amistad within Three Hundred (300)
Calendar Days.
F. The Contractor shall coordinate with the assigned Government Representative regarding the delivery date and time.
G. Notwithstanding any other provision under the contract, the Contractor shall give a minimum of three business days advance notice before the delivery date.
H. There shall be no delivery during Federal Holidays.
2.11 Trailer and Towing
The Contractor shall provide with the Boat a corresponding custom aluminum trailer suitable to easily tow the boat. The trailer shall be equipped with galvanized steel wheels and electric disc brakes. The trailer and boat shall further include the following:
• Galvanized steel wheels and electric disc brakes.
• Submersible LED lights.
• Adjustable bow stop and winch stand with a manual 2-speed winch and strap.
Towing Equipment for boat:
• A 4" crucifix tow post with welded pin at the rear bulkhead
• A minimum of 2" double pipe motor guard with tow line guides.
• Rubber D-shaped bumper for push knees on the forward bow
2.12 Documentation:
The Contractor shall provide at the delivery time, a minimum two sets of Operations and
Maintenance manuals for each component or sub-component supplied under this contract.
File details come from the government source that posted it. Updated .