Q-As.pdf
PDF 408 KB Posted
- Attached to
- Elevated Water Tank Federal contract opportunity
- Solicitation number
- 20223161029
About this file
This document contains a federal contract opportunity for maintenance services on an elevated water tank. The International Boundary and Water Commission is seeking quotes to sandblast the interior and exterior of a 145-foot water tank located in Falcon Heights, Texas, and recoat it per AWWA standards. The contractor must also replace an 8-inch standpipe from the valve vault to the tank bowl. Quotes are due by April 4, 2022 and the contract will be awarded to the responsible offeror providing the lowest price technically acceptable proposal. The solicitation is set aside for small businesses with revenues under $30 million. The contractor must adhere to all CDC and OSHA COVID-19 requirements while on site.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 3System Plan.jpg | JPG image | |
| 2System Plan.jpg | JPG image | |
| 1System Plan.jpg | JPG image | |
| D Falcon Water Tank Diagram.pdf | ||
| D_Falcon_Water_Tank_Inspection.pdf | ||
| PWS_Falcon_Water_Tank.pdf | ||
| Price Sheet.docx | DOCX document | |
| Wage Determination.pdf | ||
| Applicable Clauses and Provisions.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Angelica Baca
Subject: FW: 20223161029 Elevated Water Tank
Is this the tank in question?
Yes o What is the height of the tank? Approximately 145’, water tank diagram attached.
Is the intent for the interior coating work to perform spot repairs or sandblast the entire interior areas and recoat? Sandblast the entire interior areas and recoat.
o Do the interior coatings contain lead? No o Is there a specification for what the interior coating system should be? AWWA Standards, according to State rule: TCEQ title 20. Chapter 290.43 (c) (8).
Is the intent for the exterior coating work to perform a spot repair, Pressure Wash and full Overcoat, or to sandblast the exterior with containment and recoat? sandblast the exterior with containment and recoat.
o There was mention that the exterior coatings contain lead. Is there an analysis that tells how high the lead levels are? IBWC can’t guarantee lead presence or absence, Contractor may conduct a test to verify lead levels and take the necessary safety and health measures to perform the maintenance.
o Is there a specification for what the exterior coating system should be? AWWA Standards, according to State rule: TCEQ title 20. Chapter 290.43 (c) (8).
Will EM‐385 safety certification training be required? Yes Is there an inspection report available for the tank? Yes. Inspection report attached.
Is the intent to replace the 8” standpipe in its entirety from the valve vault into the bowl? Yes.
File details come from the government source that posted it. Updated .