2019-4-WTR Water Works Supplies.docx

TOWN OF YARMOUTH MASSACHUSETTS

DEPARTMENT OF PUBLIC WORKS WATER DIVISION

BID SPECIFICATIONS

WATER WORKS SUPPLIES

CONTRACT NUMBER 2019-4-WTR

INVITATION TO BID

(Notice to Bidders)

TOWN OF YARMOUTH WATER DIVISION

99 BUCK ISLAND ROAD

WEST YARMOUTH, MA 02673

TELEPHONE 508-398-2231, Ext. 1250

The Town of Yarmouth, Massachusetts, by its Town Administrator, will receive sealed bids until 2:00 PM., Monday, May 13, 2019, at the Department of Public Works Water Division Office located at 99 Buck Island Road, West Yarmouth, MA 02673. At that time and place all bids will be opened and read aloud.

Each bid must be submitted in duplicate in a sealed envelope addressed to the Yarmouth Department of Public Works Water Division, which will bear the name of the Contractor submitting the bid and be marked:

"WATER WORKS SUPPLIES 2019-4-WTR"

All bids must be made on the bid form included in the specifications.

All blank spaces for bid prices must be filled in with ink, or be typewritten, and the bid form must be fully completed and executed when submitted.

The Yarmouth Water Division reserves the right to accept or reject any or all bids, and to take such action as they deem to be in the best interest of the Town of Yarmouth.

This is not an exclusive contract to provide services or materials to the Yarmouth Water Division. The Yarmouth Water Division reserves the right to contract for similar services or materials.

The bid accepted by the Yarmouth Water Division for the water works supplies shall be valid from the date of awarding the contract until June 30, 2020.

The OWNER reserves the right to extend the contract under the same terms and conditions for a maximum period of three (3) years from date of expiration. See page BI-1 for details of contract extension terms.

Rule for Award: The contract will be awarded to the responsive and responsible bidder offering the lowest total price for the initial contract term.

i

TABLE OF CONTENTS

2019-4-WTR

Instruction to Bidders ……………………………………………………………………………….. I-1

Specifications ……………………………………………………………………………………….. SP-1

Bid Items...……………………………………………………………………………………………BI-1

Agreement (Attached) ii

INSTRUCTION TO BIDDERS

(A) MAXIMUM DRIVE TIME

Due to security concerns, loss of service concerns, and subsequent speed of restoration, the Yarmouth Water Division is imposing a maximum forty-five (45) minute drive time from the qualified vendor’s office to the Water Division office. The drive time will be determined by using Google Maps. All vendors who exceed the forty-five (45) minute drive time requirement will be excluded.

(B) REVIEW OF PROCEDURE

The Yarmouth Water Division reserves the right to review and revise any or all of the rules and regulations as deemed in the best interest of the Town.

(C) MATERIALS

All materials shall be delivered and unloaded, freight prepaid by the supplier, to the Yarmouth Water Division storage yard, or as directed within the Town of Yarmouth. Material ordered within the scope of this contract shall be delivered within fifteen (15) days unless otherwise directed by the Yarmouth Water Division. The supplier of materials shall be responsible for all damage in shipment. The supplier will replace, within thirty (30) days of notification by the Yarmouth Water Division, defective or damaged materials. Defective or damaged materials shall be replaced at the supplier’s expense.

I-1

SPECIFICATIONS

ATTENTION: The Town of Yarmouth Water Division has standardized on North American made and Lead-Free for all items in this bid package. Many descriptions used are Mueller numbers. This bid will accept Mueller or equivalent water works parts.

FITTINGS:

All fittings, valves, and accessories shall be North American made and lead-free.

All fittings shall be class 350, cement-lined inside and tar-coated outside.

All fittings shall be mechanical joint and meet AWWA specifications.

All brass and/or copper parts shall be lead-free.

TAPPING SLEEVES:

All tapping sleeves shall be Mueller Co. Stainless Steel Catalog number H-615.

RESILIENT SEATED VALVES:

All gate valves shall be Mueller Co. Catalog number A-2360, open left.

BUTTERFLY VALVES:

All butterfly valves shall be Mueller Co. Catalog number B-3211 series, open left.

GATE BOXES:

Gate boxes shall be North American made, Five (5) foot bury, and be complete units including covers. All gate boxes shall be of a weight and design which is compatible to those gate boxes already in use within the Yarmouth Water Division distribution system.

WATER BOX RISERS:

Water box risers shall be North American made, and equal in all respects to Trumbull Industries 367-5030 to 367-5038 series risers.

MECHANICAL JOINT RESTRAINT DEVICES:

Mechanical joint restraint devices shall have a working pressure of at least 350 psig in sizes 3" through 16", a minimum safety factor of 2:1, and shall be "Megalug" or equivalent.

FIRE HYDRANT CONNECTOR PIPE - OFFSET GRADES:

The connector pipe shall be compact ductile iron, AWWA C153-ANSI A21.53, 350 PSI and positioned between the fire hydrant and gate valve. The connector pipe shall be of offset design so that the fire hydrant can be adjusted to ensure placement at proper grade. The connector pipe shall have an anchoring feature at both ends so that, when used with M.J. split glands, a restrained joint is provided. The connector pipe shall be cement-lined in accordance with AWWA C104-ANSI A21.4. The connector pipe shall be equal to the “Gradelok” as manufactured by Assured Flow Sales, Inc.

ATTENTION: The Town of Yarmouth Water Division has standardized on Mueller, or equivalent, for all service connection and repair supplies.

All fittings shall conform in all respects to AWWA standards for service connection and repair fittings.

All fittings shall be of North American manufacture.

ANGLE METER STOPS: Angle meter stops shall be Mueller Co. catalog number H-14258-99000, with handles.

CURB VALVE: Curb valve shall have iron pipe thread on both ends with a quarter turn check and be Mueller H-10284 and H-10283.

CURB VALVE: Curb valve shall have compression connections for CTS O.D. tubing, both ends with a quarter turn check, and be Mueller Co. catalog numbers H-15219 and H-15209.

CORPORATION: Corporations shall have an AWWA taper for the inlet, a compression connection for CTS O.D. tubing for the outlet, and be Mueller Co. catalog numbers H-15008 and H-15013.

POLYETHYLENE TUBING: Water service line tubing. One (1) and two (2) inch (CTS) tubing shall be equal to, or better, than the following specification: 1” tubing shall have a 1.125” nominal O.D., 0.865” nominal I.D., minimum wall thickness of 0.125” and be rated for 200 psi of pressure. 2” tubing shall have a 2.125” nominal O.D., 1.637” nominal I.D., minimum wall thickness of 0.236” and be rated for 200 psi of pressure.

POLYETHYLENE TUBING INSERTS: 1” inserts shall be plastic and 2” inserts shall be stainless steel. Both inserts shall be of the type designed to be used with the polyethylene.

THREE-PART UNION: Three-part union shall have compression connections for CTS O.D. tubing on both ends and be Mueller Co. catalog number H-15403.

STRAIGHT COUPLING: Straight coupling shall have compression connection for CTS O.D. tubing by iron pipe thread, compression connection for CTS O.D. tubing by female copper flare thread and be Mueller Co. catalog numbers H-15428 and H-15451.

PACK JOINT COUPLING: Straight coupling shall have compression connection for iron pipe by iron pipe thread and be equipped with a setscrew.

"Y" BRANCH CONNECTION: "Y" branch connection shall be copper flare nut for the inlet and iron pipe thread for the outlet and be Mueller Co. catalog number H-15342.

BALL VALVES: Ball valves shall be American made.

METER PITS: A meter pit shall consist of the following 3 items: (A) Mueller Co. catalog number 330CS1860RABL – 5 foot bury, (B) Mueller Lid 780069 and (C) Mueller Pad 790153 (as an example).

Specifications for Fire Hydrants

Fire hydrants shall be five (5) foot bury with opening left with drain #42332. The hydrants shall be painted Yarmouth Water Department green with white bonnets and caps. Each hydrant shall come completely assembled and include all gaskets, flanges, nuts and bolts required for installation.

Specifications for Clamps, Couplings, and Saddles

SPECIFICATIONS FOR DUCTILE IRON PIPE CLAMPS:

Clamps shall be equal in all respects to Smith Blair 226 or Mueller-520 Ductile Iron pipe size, full circle, and stainless steel.

SPECIFICATIONS FOR PIPE JOINT CLAMPS:

Clamps shall be equal in all respects to Mueller-200 series pipe joint repair clamps for sizes 4” through 16”.

SPECIFICATIONS FOR PIPE REPAIR CLAMPS:

Clamps shall be equal in all respects to Mueller-504 and 508 series single section servi-seal pipe repair clamps with 1” and 2” Mueller (cc) threaded service outlet #504 2.35 – 14.40 and #508 4.45 – 14.40.

SPECIFICATIONS FOR DUCTILE IRON PIPE COUPLINGS:

Couplings shall be equal in all respects to Rockwell Ductile Iron pipe size 441, or Viking Johnson “Maxifit” epoxy-coated cast couplings.

SPECIFICATIONS FOR SERVICE SADDLES:

Service saddles shall have an outlet tapped to AWWA corporation taper thread. They shall be double strap design rated at 250 psig, maximum working pressure. They shall have a Ductile Iron body, hot dipped galvanized, with flattened steel straps, and rolled strap thread. They shall have Neoprene sealing gasket. They shall be equal in all respects to Mueller Co. DB2A Series Service Saddles.

SP-3

BID ITEMS

FOR WATER WORKS SUPPLIES

CONTRACT 2019-4-WTR

A conditional or qualified bid will not be accepted.

Each bidder is responsible for reading and being thoroughly familiar with the contract document. The failure or omission of any bidder to do any of the foregoing shall in no way relieve any bidder from any obligation in respect to this bid.

After bids have been submitted, the bidder shall not assert that there was a misunderstanding concerning the quantities of materials or work required.

Bid price shall include cost of equipment, materials, shipping, and all other labor costs per the bid specifications.

The OWNER reserves the right to extend the contract under the same terms and conditions for a maximum period of three (3) years from date of expiration. Such extension will be at the sole discretion of the OWNER and will require the execution of an agreement page, a contract extension of term, and bonds and insurances to be renewed by the contractor each year.

The successful bidder agrees to complete work as stated in the bid specifications for the following price:

Bid Item*

ITEM NO. 1*

12" X 12" Mechanical Joint Tee

Dollars ($ ) per unit Extended Total About 3 Tees

ITEM NO. 2*

12" X 10" Mechanical Joint Tee

Dollars ($ ) per unit Extended Total About 1 Tee

ITEM NO. 3*

12" X 8" Mechanical Joint Tee

Dollars ($ ) per unit Extended Total About 6 Tees

ITEM NO. 4*

12" X 6" Mechanical Joint Tee

Dollars ($ ) per unit Extended Total About 18 Tees

ITEM NO. 5*

10" X 10" Mechanical Joint Tee

Dollars ($ ) per unit Extended Total

ITEM NO. 6*

10" X 8" Mechanical Joint Tee

Dollars ($ ) per unit Extended Total

ITEM NO. 7*

10" X 6" Mechanical Joint Tee

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Tees

ITEM NO. 8*

8" X 8" Mechanical Joint Tee

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Tees

ITEM NO. 9*

8" X 6" Mechanical Joint Tee

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 30 Tees

ITEM NO. 10*

6" X 6" Mechanical Joint Tee

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Tees

ITEM NO. 11*

12" X 10" Mechanical Joint Reducer

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Reducers

ITEM NO. 12*

12" X 8" Mechanical Joint Reducer

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 13*

12" X 6" Mechanical Joint Reducer

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 14*

10" X 8" Mechanical Joint Reducer

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 15*

10" X 6" Mechanical Joint Reducer

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 16*

8" X 6" Mechanical Joint Reducer

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Reducer

ITEM NO. 17*

12" X 1/16" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 bends

ITEM NO. 18*

12" X 1/8" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 Bends

ITEM NO. 19*

12" X 1/4" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 20*

10" X 1/16" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Bends

ITEM NO. 21*

10" X 1/8" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 22*

10" X 1/4" Mechanical Joint Bends

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 23*

8" X 1/16" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 bends

ITEM NO. 24*

8" X 1/8" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 25*

8" X 1/4" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 26*

6" X 1/16" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 27*

6" X 1/8" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 28*

6" X 1/4" Mechanical Joint Bends

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 29*

12" X 8" Mechanical Joint Anchor Tee

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Anchor Tees

ITEM NO. 30*

12" X 6" Mechanical Joint Anchor Tee

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Anchor Tee

ITEM NO. 31*

10" X 8" Mechanical Joint Anchor Tee

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 32*

10" X 6" Mechanical Joint Anchor Tee

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 33*

8" X 8" Mechanical Joint Anchor Tee

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 34*

8" X 6" Mechanical Joint Anchor Tee

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 26 Anchor Tees

ITEM NO. 35*

6" X 6" Mechanical Joint Anchor Tee

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 36*

LF 3/4" X Close Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 100 Nipples

ITEM NO. 37*

LF 3/4" X 2" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 38*

LF 3/4" X 3" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 39*

LF 3/4" X 4" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 40*

LF 3/4" X 5" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 41*

LF 3/4" X 6" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 42*

LF 1" X Close Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 43*

LF 1" X 2" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 44*

LF 1" X 3" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 45*

LF 1" X 4" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 46*

LF 1" X 5" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 47*

LF 1" X 6" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 48*

LF 1" X 12" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 250 Nipples

ITEM NO. 49*

LF 1-1/2" X 4" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 40 Nipples

ITEM NO. 50*

LF 1-1/2" X 6" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 51*

LF 2" X 4" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 52*

LF 2" X 6" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 53*

LF 2" X 12" Brass Nipple GBL

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 54*

10" Gate Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Gate Valves

ITEM NO. 55*

12" Gate Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 8 Gate Valves

ITEM NO. 56*

16" Butterfly Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Butterfly Valve

ITEM NO. 57*

20" Butterfly Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Butterfly Valve

ITEM NO. 58*

Five (5) Foot Bury Gate Boxes

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 60 Gate Boxes

ITEM NO. 59*

1" Water Box Risers

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 50 Risers

ITEM NO. 60*

1-1/2" Water Box Risers

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 100 Risers

ITEM NO. 61*

2" Water Box Riser

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 62*

3" Water Box Riser

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

ITEM NO. 63*

4" Water Box Riser

________________________________________ ______________________ Dollars ($ ) per unit Extended Total) About 25 Risers

ITEM NO. 64*

6" Water Box Riser

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 15 Risers

ITEM NO. 65*

6" Mechanical Joint Restraint Device

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Restraint Devices

ITEM NO. 66*

8" Mechanical Joint Restraint Device

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Restraint Devices

ITEM NO. 67*

10" Mechanical Joint Restraint Device

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Restraint Devices

ITEM NO. 68*

12" Mechanical Joint Restraint Device

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Restraint Devices

ITEM NO. 69*

4" Bell Joint and Slip-Joint Pipe Repair Clamp

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Repair Clamps

ITEM NO. 70*

6" Bell Joint and Slip-Joint Pipe Repair Clamp

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Repair Clamps

ITEM NO. 71*

8" Bell Joint and Slip-Joint Pipe Repair Clamp

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Repair Clamps

ITEM NO. 72*

10" Bell Joint and Slip-Joint Pipe Repair Clamp

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 3 Repair Clamps

ITEM NO. 73*

12" Bell Joint and Slip-Joint Pipe Repair Clamp

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 3 Repair Clamps

ITEM NO. 74*

16" Bell Joint and Slip-Joint Pipe Repair Clamp

Dollars ($ ) per unit Extended Total

ITEM NO. 75*

20" Bell Joint and Slip-Joint Pipe Repair Clamp

Dollars ($ ) per unit Extended Total

ITEM NO. 76*

4" X 2" Pipe Cap

Dollars ($ ) per unit Extended Total About 2 Caps

ITEM NO. 77*

6" X 2" Pipe Cap

Dollars ($ ) per unit Extended Total

ITEM NO. 78*

8" X 2" Pipe Cap

Dollars ($ ) per unit Extended Total

ITEM NO. 79*

10" X 2" Pipe Cap

Dollars ($ ) per unit Extended Total

ITEM NO. 80*

12" X 2" Pipe Cap

Dollars ($ ) per unit Extended Total

ITEM NO. 81*

16" X 2" Pipe Cap

Dollars ($ ) per unit Extended Total

ITEM NO. 82*

20" X 2" Pipe Cap

Dollars ($ ) per unit Extended Total

ITEM NO. 83*

12" Grade Offset (Fire Hydrant Connector Pipe)

Dollars ($ ) per unit Extended Total About 1 Connector Pipe

ITEM NO. 84*

24" Grade Offset (Fire Hydrant Connector Pipe)

Dollars ($ ) per unit Extended Total About 1 Connector Pipe

ITEM NO. 85*

8" X 1/32" Mechanical Joint Bend

Dollars ($ ) per unit Extended Total About 6 Bends

ITEM NO. 86*

6" X 1/32" Mechanical Joint Bend

Dollars ($ ) per unit Extended Total About 6 Bends

ITEM NO. 87*

5/8" X 3/4" X 1" Compression Angle Meter Stop (B-24258 Ball Valve with Optional Handle)

Dollars ($ ) per unit Extended Total About 50 Angle Meter Stops

ITEM NO. 88*

3/4" X 3/4" F.I.P. X F.I.P. Curb Stop (B-20283 Ball Curb Valve)

Dollars ($ ) per unit Extended Total About 10 Curb Stops

ITEM NO. 89*

1" X 1" F.I.P. X F.I.P. Curb Stop (B-20283 Ball Curb Valve)

Dollars ($ ) per unit Extended Total About 100 Curb Stops

ITEM NO. 90*

1-1/2" X 1-1/2" F.I.P. X F.I.P. Curb Stop (B-20283 Ball Curb Valve)

Dollars ($ ) per unit Extended Total About 10 Curb Stops

ITEM NO. 91*

2" X 2" F.I.P. X F.I.P. Curb Stop (B-20283 Ball Curb Valve)

Dollars ($ ) per unit Extended Total About 20 Curb Stops

ITEM NO. 92*

1" X 1" CTS OD Curb Stop (B-25155 Ball Valve on Both Ends)

Dollars ($ ) per unit Extended Total About 100 Curb Stops

ITEM NO. 93*

1-1/2" X 1-1/2" CTS OD Curb Stop (B-25155 Ball Valve on Both Ends)

Dollars ($ ) per unit Extended Total About 5 Curb Stops

ITEM NO. 94*

2" X 2" CTS OD Curb Stop (B-25155 Ball Valve on Both Ends)

Dollars ($ ) per unit Extended Total About 20 Curb Stops

ITEM NO. 95*

3/4" CTS OD Corporation

Dollars ($ ) per unit Extended Total About 5 Corporations

ITEM NO. 96*

3/4" x 1" CTS OD Corporation

Dollars ($ ) per unit Extended Total About 20 Corporations

ITEM NO. 97*

1" CTS OD Corporation

Dollars ($ ) per unit Extended Total About 100 Corporations

ITEM NO. 98*

1-1/2" CTS OD Corporation

Dollars ($ ) per unit Extended Total About 5 Corporations

ITEM NO. 99*

2" CTS OD Corporation

Dollars ($ ) per unit Extended Total About 20 Corporations

ITEM NO. 100*

3/4" X 3/4" CTS OD Three-Part Union

Dollars ($ ) per unit Extended Total About 5 Three-Part Unions

ITEM NO. 101*

1" X 1" CTS OD Three-Part Union

Dollars ($ ) per unit Extended Total About 100 Three-Part Unions

ITEM NO. 102*

1-1/2" X 1-1/2" CTS OD Three-Part Union

Dollars ($ ) per unit Extended Total About 5 Three-Part Unions

ITEM NO. 103*

2" X 2" CTS OD Three-Part Union

Dollars ($ ) per unit Extended Total About 25 Three-Part Unions

ITEM NO. 104*

3/4" M.I.P. X 1" CTS OD Straight Coupling

Dollars ($ ) per unit Extended Total About 20 Straight Couplings

ITEM NO. 105*

1" M.I.P. X 1" CTS OD Straight Coupling

Dollars ($ ) per unit Extended Total About 100 Straight Couplings

ITEM NO. 106*

1-1/2" M.I.P. X 1-1/2" CTS OD Straight Coupling

Dollars ($ ) per unit Extended Total About 5 Straight Couplings

ITEM NO. 107*

2" M.I.P. X 2" CTS OD Straight Coupling

Dollars ($ ) per unit Extended Total

ITEM NO. 108*

3/4" F.I.P. X 1" CTS OD Straight Coupling

Dollars ($ ) per unit Extended Total

ITEM NO. 109*

1" F.I.P. X 1" CTS OD Straight Coupling

Dollars ($ ) per unit Extended Total About 50 Straight Couplings

ITEM NO. 110*

1" F.I.P. X 2" CTS OD Straight Coupling

Dollars ($ ) per unit Extended Total

ITEM NO. 111*

1-1/2" F.I.P. X 1-1/2" CTS OD Straight Coupling

Dollars ($ ) per unit Extended Total About 5 Straight Couplings

ITEM NO. 112*

2" F.I.P. X 2" CTS OD Straight Coupling

Dollars ($ ) per unit Extended Total

ITEM NO. 113*

3/4" M.I.P. X 3/4" IP Pack Joint Coupling

Dollars ($ ) per unit Extended Total About 20 Pack Joint Couplings

ITEM NO. 114*

1" M.I.P. X 1" IP Pack Joint Coupling

Dollars ($ ) per unit Extended Total About 100 Pack Joint Couplings

ITEM NO. 115*

1-1/2" M.I.P. X 1-1/2" IP Pack Joint Coupling

Dollars ($ ) per unit Extended Total About 5 Pack Joint Couplings

ITEM NO. 116*

2" M.I.P. X 2" IP Pack Joint Coupling

Dollars ($ ) per unit Extended Total

ITEM NO. 117*

1" F.I.P. X 1" IP Pack Joint Coupling

Dollars ($ ) per unit Extended Total

ITEM NO. 118*

1-1/2" F.I.P. X 1-1/2" IP Pack Joint Coupling

Dollars ($ ) per unit Extended Total About 5 Pack Joint Couplings

ITEM NO. 119*

2" F.I.P. X 2" IP Pack Joint Coupling

Dollars ($ ) per unit Extended Total

ITEM NO. 120*

3/4" F x F Ball Valve

Dollars ($ ) per unit Extended Total About 20 Ball Valves

ITEM NO. 121*

1" F x F Ball Valve

Dollars ($ ) per unit Extended Total About 100 Ball Valves

ITEM NO. 122*

1-1/2" F x F Ball Valve

Dollars ($ ) per unit Extended Total About 5 Ball Valves

ITEM NO. 123*

2" F x F Ball Valve

Dollars ($ ) per unit Extended Total About 20 Ball Valves

ITEM NO. 124*

Five (5) Foot Bury Curb Box

Dollars ($ ) per unit Extended Total About 200 Curb Boxes

ITEM NO. 125*

16" Curb Box Extensions

Dollars ($ ) per unit Extended Total About 50 Curb Box Extensions

ITEM NO. 126*

5/8” Meter Pit (18” Tube #203CS1848-LABL, Lid #790018, Pad #790153)

Dollars ($ ) per unit Extended Total About 100 Pits

ITEM NO. 127*

Dual 5/8” Meter Pit (Tube #203CD1848-LABL000055, Lid #780069, Pad #790153)

Dollars ($ ) per unit Extended Total About 30 Pits

ITEM NO. 128*

1" Meter Pit (Tube #330CS1848FABL, Lid #780069, Pad #790153)

Dollars ($ ) per unit Extended Total About 30 Pits

ITEM NO. 129*

2" Meter Pit (Tube #550VS2748LAB, Frame #700098-1, Side Lock Lid #282925, Pad #790058)

Dollars ($ ) per unit Extended Total About 10 Pits

ITEM NO. 130*

1" H-15526 Quarter Bend Union CTS Compression X CTS Compression

Dollars ($ ) per unit Extended Total About 10 Quarter Bend Unions

ITEM NO. 131*

2" H-15526 Quarter Bend Union CTS Compression X CTS Compression

Dollars ($ ) per unit Extended Total About 10 Quarter Bend Unions

ITEM NO. 132*

1" H-15531 Quarter Bend Coupling CTS Compression X M.I.P.

Dollars ($ ) per unit Extended Total About 10 Quarter Bend Couplings

ITEM NO. 133*

2" H-15531 Quarter Bend Coupling CTS Compression X M.I.P.

Dollars ($ ) per unit Extended Total

ITEM NO. 134*

1" H-15533 Quarter Bend Coupling CTS Compression X F.I.P.

Dollars ($ ) per unit Extended Total

ITEM NO. 135*

2" H-15533 Quarter Bend Coupling CTS Compression X F.I.P.

Dollars ($ ) per unit Extended Total

ITEM NO. 136*

1" H-15172 CTS Compression X F.I.P.

Dollars ($ ) per unit Extended Total About 10 Units

ITEM NO. 137*

Mueller 5' Bury Fire Hydrant (Green, Open Left)

Dollars ($ ) per unit Extended Total About 12 Hydrants

ITEM NO. 138*

5' Hydrant Drain Rods

Dollars ($ ) per unit Extended Total About 6 Drain Rods

ITEM NO. 139*

5-1/2' Hydrant Drain Rods

Dollars ($ ) per unit Extended Total About 6 Drain Rods

ITEM NO. 140*

Break-Away Flange Kit

Dollars ($ ) per unit Extended Total About 12 Kits

ITEM NO. 141*

Drain Support Assembly

Dollars ($ ) per unit Extended Total About 12 Assemblies

ITEM NO. 142*

6" x 15" Full Circle Clamp

Dollars ($ ) per unit Extended Total About 6 Full Circle Clamps

ITEM NO. 143*

8" x 15" Full Circle Clamp

Dollars ($ ) per unit Extended Total

ITEM NO. 144*

10" x 15" Full Circle Clamp

Dollars ($ ) per unit Extended Total

ITEM NO. 145*

12" x 15" Full Circle Clamp

Dollars ($ ) per unit Extended Total

ITEM NO. 146*

16" x 15" Full Circle Clamp

Dollars ($ ) per unit Extended Total About 2 Full Circle Clamps

ITEM NO. 147*

20" x 15" Full Circle Clamp

Dollars ($ ) per unit Extended Total About 2 Full Circle Clamps

ITEM NO. 148*

6" Coupling

Dollars ($ ) per unit Extended Total About 32 Couplings

ITEM NO. 149*

8" Coupling

Dollars ($ ) per unit Extended Total About 35 Couplings

ITEM NO. 150*

10" Coupling

Dollars ($ ) per unit Extended Total About 6 Couplings

ITEM NO. 151*

12" Coupling

Dollars ($ ) per unit Extended Total About 6 Couplings

ITEM NO. 152*

16" Coupling

Dollars ($ ) per unit Extended Total About 2 Couplings

ITEM NO. 153*

20" Coupling

Dollars ($ ) per unit Extended Total About 2 Couplings

ITEM NO. 154*

6" x 1" Service Saddle

Dollars ($ ) per unit Extended Total About 10 Service Saddles

ITEM NO. 155*

6" x 2" Service Saddle

Dollars ($ ) per unit Extended Total

ITEM NO. 156*

8" x 1" Service Saddle

Dollars ($ ) per unit Extended Total

ITEM NO. 157*

8" x 2" Service Saddle

Dollars ($ ) per unit Extended Total

ITEM NO. 158*

10" x 1" Service Saddle

Dollars ($ ) per unit Extended Total About 5 Service Saddles

ITEM NO. 159*

10" x 2" Service Saddle

Dollars ($ ) per unit Extended Total

ITEM NO. 160*

12" x 1" Service Saddle

Dollars ($ ) per unit Extended Total About 6 Service Saddles

ITEM NO. 161*

12" x 2" Service Saddle

Dollars ($ ) per unit Extended Total

ITEM NO. 162*

16" x 1" Service Saddle

Dollars ($ ) per unit Extended Total About 2 Service Saddles

ITEM NO. 163*

16" x 2" Service Saddle

Dollars ($ ) per unit Extended Total

ITEM NO. 164*

20" x 1" Service Saddle

Dollars ($ ) per unit Extended Total

ITEM NO. 165*

20" x 2" Service Saddle

Dollars ($ ) per unit Extended Total

ITEM NO. 166*

2" x 1" Plastic Tapping Saddle

Dollars ($ ) per unit Extended Total About 10 Tapping Saddles

ITEM NO. 167*

1" Ball Valve

Dollars ($ ) per unit Extended Total About 200 Ball Valves

ITEM NO. 168*

2" Ball Valve

Dollars ($ ) per unit Extended Total About 25 Ball Valves

ITEM NO. 169*

1" Male Compression

Dollars ($ ) per unit Extended Total About 100 Male Compressions

ITEM NO. 170*

2" Male Compression

Dollars ($ ) per unit Extended Total About 25 Male Compressions

ITEM NO. 171*

1" Female Compression

Dollars ($ ) per unit Extended Total About 200 Female Compressions

ITEM NO. 172*

2" Female Compression

Dollars ($ ) per unit Extended Total About 25 Female Compressions

ITEM NO. 173*

1" Telco Male

Dollars ($ ) per unit Extended Total About 200 Telco Males

ITEM NO. 174*

2" Telco Male

Dollars ($ ) per unit Extended Total About 25 Telco Males

ITEM NO. 175*

5/8" Meter Angle Valve Compression

Dollars ($ ) per unit Extended Total About 100 Meter Angle Valve Compressions

ITEM NO. 176*

1" Brass 45° Elbow

Dollars ($ ) per unit Extended Total About 100 Brass 45° Elbows

ITEM NO. 177*

1" Brass 90° Elbow

Dollars ($ ) per unit Extended Total About 200 Brass 90° Elbows

ITEM NO. 178*

1" x 3/4" Bushing

Dollars ($ ) per unit Extended Total About 100 Bushings

ITEM NO. 179*

1" x 3/4" Reducer

Dollars ($ ) per unit Extended Total About 100 Reducers

ITEM NO. 180*

2" Iron Pipe C.S.

Dollars ($ ) per unit Extended Total About 25 Iron Pipe C.S.

ITEM NO. 181*

2" C.S. Compression

Dollars ($ ) per unit Extended Total About 25 C.S. Compressions

ITEM NO. 182*

Adj. Meter Pit with Check Valve

Dollars ($ ) per unit Extended Total About 100 Adj. Meter Pits with Check Valve

ITEM NO. 183*

1" Plastic Insert

Dollars ($ ) per unit Extended Total About 1,000 Plastic Inserts

ITEM NO. 184*

1-1/2" Stainless Steel Insert

Dollars ($ ) per unit Extended Total About 25 Stainless Steel Inserts

ITEM NO. 185*

2" Stainless Steel Insert

Dollars ($ ) per unit Extended Total About 50 Stainless Steel Inserts

ITEM NO. 186*

1" CTS Plastic (300’ Roll)

Dollars ($ ) per unit Extended Total About 3,000 Feet

ITEM NO. 187*

1-1/2" CTS Plastic (100’ Roll)

Dollars ($ ) per unit Extended Total About 400 Feet

ITEM NO. 188*

2" CTS Plastic (100’ Roll)

Dollars ($ ) per unit Extended Total About 1,000 Feet

ITEM NO. 189*

1-1/4" Brass Cap

Dollars ($ ) per unit Extended Total About 30 Brass Caps

ITEM NO. 190*

1-1/4" x 1" Brass Reducer

Dollars ($ ) per unit Extended Total About 50 Brass Reducers

ITEM NO. 191*

Meter Check Valve Female for 5/8" Meter

Dollars ($ ) per unit Extended Total About 200 Meter Check Valve Females

ITEM NO. 192*

6" Hymax Coupling

Dollars ($ ) per unit Extended Total About 20 Hymax Couplings

ITEM NO. 193*

8" Hymax Coupling

Dollars ($ ) per unit Extended Total About 20 Hymax Couplings

ITEM NO. 194*

10" Hymax Coupling

Dollars ($ ) per unit Extended Total About 6 Hymax Couplings

ITEM NO. 195*

12" Hymax Coupling

Dollars ($ ) per unit Extended Total About 6 Hymax Couplings

The successful bidder agrees to complete work as stated in the bid specifications for the following unit sum price:

The grand total price shall be based on the sum of the extended totals of item(s) one (1) through one hundred ninety-five (195), inclusive.

In Words _______________________

In Dollars ($__ )

Signature:

Owner or Authorized personal Date

*1. Prices shall be stated in both words and figures. In the event of a discrepancy between the price in words and the price in figures, the words shall govern. In the event of a discrepancy between the total of the items and the totals stated, the total of the items shall govern.

*2. All prices shall be typewritten or written by hand in ink. Interlineation or erasure will void this bid.

*3. The contractor acknowledges that the Town is legally unable to incur a liability in excess of an appropriation; that if funds previously appropriated for the above described work are insufficient for the anticipated total obligation of the Town that the Water Division will seek further appropriations for the next fiscal year; and that the obligation of the Town for periods extending beyond June 30th of any fiscal year is necessarily contingent upon the appropriation by the voters of additional funds.

*4. The bid item pages of this contract document consist of pages BI-1 through BI-29.

BI-13