2018-4-WTR Water Works Supplies.doc

TOWN OF YARMOUTH MASSACHUSETTS

DEPARTMENT OF PUBLIC WORKS WATER DIVISION

BID SPECIFICATIONS

WATER WORKS SUPPLIES

CONTRACT NUMBER 2018-4-WTR

INVITATION TO BID

(Notice to Bidders)

TOWN OF YARMOUTH WATER DIVISION

99 BUCK ISLAND ROAD

W. YARMOUTH, MA 02673

TELEPHONE 508-398-2231, Ext. 1250 The Town of Yarmouth, Massachusetts, by its Town Administrator, will receive sealed bids until 10:00 A.M., Monday, April 30, 2018, at the Department of Public Works Water Division Office located at 99 Buck Island Rd. W. Yarmouth, MA 02673. At that time and place all bids will be opened and read aloud.

Each bid must be submitted in duplicate in a sealed envelope, addressed to the Yarmouth Department of Public Works Water Division, which will bear the name of the Contractor submitting the bid and be marked:

"WATER WORKS SUPPLIES 2018-4-WTR"

All bids must be made on the bid form included in the specifications.

All blank spaces for bid prices must be filled in with ink, or be typewritten, and the bid form must be fully completed and executed when submitted.

The Yarmouth Water Division reserves the right to accept or reject any or all bids, and to take such action as they deem to be in the best interest of the Town of Yarmouth.

This is not an exclusive contract to provide services or materials to the Yarmouth Water Division. The Yarmouth Water Division reserves the right to contract for similar services or materials.

The bid accepted by the Yarmouth Water Division for the WATER WORKS SUPPLIES shall be valid from the date of awarding the contract until June 30, 2019.

The OWNER reserves the right to extend the contract under the same terms and conditions for a maximum period of three (3) years from date of expiration. See page BI-1 for details of contract extension terms.

Rule for Award: The contract will be awarded to the responsive and responsible bidder offering the lowest total price for the initial contract term.

NB-1

TABLE OF CONTENTS

2018-4-WTR

Instruction to Bidders ……………………………………………………………………………….. I-1

Specifications

……………………………………………………………………………………….. SP-1

Massachusetts General Laws

……………………………………………………………………….. MG-1

Conflict of Interest Statement ……………………………………………………………………….. COI-1

Certificate of Non-Collusion ...………………………………………………………………………. NC-1

State Certification …………………….……………………………………………………………… SC-1

Bid Items...……………………………………………………………………………………………. BI-1

Notice of Award…………...…..……………………………………………………………………… NA-1

Agreement...……………………………………………………………………………………………FA-1

Change Orders …..……………………………………………………………………………………. CO-1 i

INSTRUCTION TO BIDDERS

(A) MAXIMUM DRIVE TIME

Due to security concerns, loss of service concerns, and subsequent speed of restoration, the Yarmouth Water Division is imposing a maximum forty-five (45) minute drive time from the qualified vendor’s office to the Water Division office. The drive time will be determined by using Google Maps. All vendors who exceed the forty-five (45) minute drive time requirement will be excluded.

(B) TERMINATION OF CONTRACT

The Yarmouth Water Division shall reserve the right to terminate this contract whenever they deem that the Contractor is in violation of State laws, local regulations and/or any provisions of this contract.

(C) REVIEW PROCEDURE

The Yarmouth Water Division reserves the right to review and revise any or all of the rules and regulations as deemed in the best interest of the Town.

(D) INSURANCE

The Contractor shall carry insurance in an amount satisfactory to the Town of Yarmouth. Workman's compensation is statutory. The Contractor's liability insurance shall provide, by any necessary removal of exclusions, or by separate policies of the same limits, coverage for all hazards inherent in the work of this contract without limiting the foregoing statement. The insurance shall cover any of the following hazards which may be present in the contract: Explosion, collapse, and underground damage; damage to the property in the Contractor's care, custody, or control; rigging and hoisting. The Contractor shall secure and maintain insurance to cover the indemnification as noted herein.

These provisions shall be recited in full on the reverse side of the certificate evidencing such insurance. "The Contractor agrees to defend, indemnify and to hold harmless, the Town, property owner, and their respective officers, agents and employees from and against any and all damages, claims, suits, judgments and costs, including reasonable attorney's fees and expenses, for or relating to damage to property and death of or bodily or other personal injury to any person or persons, directly or indirectly arising out of or caused or claimed to have caused by or in connection with the performance of or failure to perform any work provided hereunder by the contractor, his subcontractors or the Contractors servants, agents or employees."

(E) MATERIALS

All materials shall be delivered and unloaded, freight prepaid by the supplier, to the Yarmouth Water Division storage yard, or as directed within the Town of Yarmouth. Material ordered within the scope of this contract shall be delivered within fifteen (15) days unless otherwise directed by the Yarmouth Water Division. The supplier of materials shall be responsible for all damage in shipment. The supplier will replace, within thirty (30) days of notification by the Yarmouth Water Division, defective or damaged materials. Defective or damaged materials shall be replaced at the supplier’s expense.

I-1

(F) CONTRACT DOCUMENTS

The term "Contract Documents" means and includes the following:

Invitation for Bids

General Information Bid Specifications

Massachusetts General Laws, Chapter 30B

Conflict of Interest Statement

Certificate of Non-Collusion

State Certification

Bid Items

Notice of Award

Agreement

Change Order Form

PLEASE TAKE NOTICE

Please execute and return with your Submitted Bid the following sections:

Conflict of Interest Statement

Certificate of Non-Collusion

State Certification

The Town of Yarmouth may reject any bid for failure to comply with this request.

I-2

SPECIFICATIONS

ATTENTION: The Town of Yarmouth Water Division has standardized on North American made and Lead-Free for all items in this bid package. Many descriptions used are Mueller numbers. This bid will accept Mueller or equivalent water works parts.

FITTINGS:

All fittings, valves, and accessories shall be North American made and lead-free.

All fittings shall be class 350, cement-lined inside and tar-coated outside.

All fittings shall be mechanical joint and meet AWWA specifications.

All brass and/or copper parts shall be lead-free.

TAPPING SLEEVES:

All tapping sleeves shall be Mueller Co. Stainless Steel Catalog number H-615.

RESILIENT SEATED VALVES:

All gate valves shall be Mueller Co. Catalog number A-2360, open left.

BUTTERFLY VALVES:

All butterfly valves shall be Mueller Co. Catalog number B-3211 series, open left.

GATE BOXES:

Gate boxes shall be NORTH AMERICAN MADE, Five (5) foot bury, and be complete units including covers. All gate boxes shall be of a weight and design which is compatible to those gate boxes already in use within the Yarmouth Water Division distribution system.

WATER BOX RISERS:

Water box risers shall be NORTH AMERICAN MADE, and equal in all respects to Trumbull Industries 367-5030 to 367-5038 series risers.

MECHANICAL JOINT RESTRAINT DEVICES:

Mechanical joint restraint devices shall have a working pressure of at least 350 psig in sizes 3" through 16", a minimum safety factor of 2:1, and shall be "Megalug" or equivalent.

FIRE HYDRANT CONNECTOR PIPE - OFFSET GRADES:

The connector pipe shall be compact ductile iron, AWWA C153-ANSI A21.53, 350 PSI and positioned between the fire hydrant and gate valve. The connector pipe shall be of offset design so that the fire hydrant can be adjusted to ensure placement at proper grade. The connector pipe shall have an anchoring feature at both ends so that, when used with M.J. split glands, a restrained joint is provided. The connector pipe shall be cement-lined in accordance with AWWA C104-ANSI A21.4. The connector pipe shall be equal to the “Gradelok” as manufactured by Assured Flow Sales, Inc.

SP-1

ATTENTION: The Town of Yarmouth Water Division has standardized on Mueller, or Equivalent, for all service connection and repair supplies.

All fittings shall conform in all respects to AWWA standards for service connection and repair fittings.

All fittings shall be of North American manufacture.

ANGLE METER STOPS: Angle meter stops shall be Mueller Co. catalog number H-14258-99000, with handles.

CURB VALVE: Curb valve shall have iron pipe thread on both ends with a quarter turn check and be Mueller H-10284 and H-10283.

CURB VALVE: Curb valve shall have compression connections for CTS O.D. tubing, both ends with a quarter turn check, and be Mueller Co. catalog numbers H-15219 and H-15209.

CORPORATION: Corporations shall have an AWWA taper for the inlet, a compression connection for CTS O.D. tubing for the outlet, and be Mueller Co. catalog numbers H-15008 and H-15013.

POLYETHYLENE TUBING: Water service line tubing. One (1) and two (2) inch (CTS) tubing shall be equal to, or better, than the following specification: 1” tubing shall have a 1.125” nominal O.D., 0.865” nominal I.D., minimum wall thickness of 0.125” and be rated for 200 psi of pressure. 2” tubing shall have a 2.125” nominal O.D., 1.637” nominal I.D., minimum wall thickness of 0.236” and be rated for 200 psi of pressure.

POLYETHYLENE TUBING INSERTS: 1” inserts shall be plastic and 2” inserts shall be stainless steel. Both inserts shall be of the type designed to be used with the polyethylene.

THREE PART UNION: Three part union shall have compression connections for CTS O.D. tubing on both ends and be Mueller Co. catalog number H-15403.

STRAIGHT COUPLING: Straight coupling shall have compression connection for CTS O.D. tubing by iron pipe thread, compression connection for CTS O.D. tubing by female copper flare thread and be Mueller Co. catalog numbers H-15428 and H-15451.

PACK JOINT COUPLING: Straight coupling shall have compression connection for iron pipe by iron pipe thread and be equipped with a setscrew.

"Y" BRANCH CONNECTION: "Y" branch connection shall be copper flare nut for the inlet and iron pipe thread for the outlet and be Mueller Co. catalog number H-15342.

BALL VALVES: Ball valves shall be American made.

METER PITS: A meter pit shall consist of the following 3 items: (A) Mueller Co. catalog number 330CS1860RABL – 5 foot bury, (B) Mueller Lid 780069 and (C) Mueller Pad 790153 (As an example).

SP-2

Specifications for Fire Hydrants

Fire hydrants shall be five (5) foot bury with opening left with drain #42332. The hydrants shall be painted Yarmouth Water Department green with white bonnets and caps. Each hydrant shall come completely assembled and include all gaskets, flanges, nuts and bolts required for installation.

Specifications for Clamps, Couplings, and Saddles

SPECIFICATIONS FOR DUCTILE IRON PIPE CLAMPS:

Clamps shall be equal in all respects to Smith Blair 226 or Mueller-520 Ductile Iron pipe size, full circle, and stainless steel.

SPECIFICATIONS FOR PIPE JOINT CLAMPS:

Clamps shall be equal in all respects to Mueller-200 series pipe joint repair clamps for sizes 4” through 16”.

SPECIFICATIONS FOR PIPE REPAIR CLAMPS:

Clamps shall be equal in all respects to Mueller-504 and 508 series single section servi-seal pipe repair clamps with 1” and 2” Mueller (cc) threaded service outlet #504 2.35 – 14.40 and #508 4.45 – 14.40.

SPECIFICATIONS FOR DUCTILE IRON PIPE COUPLINGS:

Couplings shall be equal in all respects to Rockwell Ductile Iron pipe size 441, or Viking Johnson “Maxifit” epoxy-coated cast couplings.

SPECIFICATIONS FOR SERVICE SADDLES:

Service saddles shall have an outlet tapped to AWWA corporation taper thread. They shall be double strap design rated at 250 psig, maximum working pressure. They shall have a Ductile Iron body, hot dipped galvanized, with flattened steel straps, and rolled strap thread. They shall have Neoprene sealing gasket. They shall be equal in all respects to Mueller Co. DB2A Series Service Saddles.

SP-3

MASSACHUSETTS GENERAL LAWS

In accordance with Massachusetts General Law, Chapter 30, the following paragraphs are included herein:

SECTION 39F (A) - (H)

(A) "Forthwith after the general contractor receives payment on account of a periodic estimate, the general contractor shall pay to each subcontractor the amount paid for the labor performed and the materials furnished by that subcontractor, less any amount specified in any court proceedings barring such payment and also less any amount claimed due from the subcontractor by the general contractor."

(B) "Not later than the sixty-fifth day after each subcontractor substantially completes his work in accordance with the plans and specifications, the entire balance due under the subcontract less amounts retained by the awarding authority as the estimated cost of completing the incomplete and unsatisfactory items of work, shall be due the subcontractor; and the awarding authority shall pay that amount to the general contractor. The general contractor shall forthwith pay to the subcontractor the full amount received from the awarding authority less any amount specified in any court proceedings barring such payment and also less any amount claimed due from the subcontractor by the general contractor."

(C) "Each payment made by the awarding authority to the general contractor pursuant to subparagraphs (A) and (B) of this paragraph for the labor performed and the materials furnished by a subcontractor shall be made to the general contractor for the account of that subcontractor; and the awarding authority shall take reasonable steps to compel the general contractor to make each such payment to each such contractor. If the awarding authority has received a demand for direct payment from a subcontractor as provided in subparagraphs (A) AND (B), the awarding authority shall act upon the demand as provided in this section."

(D) "If, within seventy days after the subcontractor has substantially completed the subcontract work, the subcontractor has not received from the general contractor the balance due under the subcontract including any amount due for extra labor and materials furnished to the general contractor, less any amount retained by the awarding authority as the estimated cost of completing the incomplete and unsatisfactory items of work, the subcontractor may demand direct payment of that balance from the awarding authority. The demand shall be by a sworn statement delivered to or sent by certified mail to the awarding authority, and a copy shall be delivered to or sent by certified mail to the general contractor at the same time. The demand shall contain a detailed breakdown of the balance due under the subcontract and also a statement of the status of completion of the subcontract work. Any demand made after substantial completion of the subcontract work shall be valid even if delivered or mailed prior to the seventieth day after the subcontractor has substantially completed the subcontract work. Within ten days after the subcontractor has delivered or so mailed the demand to the awarding authority and delivered or so mailed a copy to the general contractor, the general contractor may reply to the demand. The reply shall be by a sworn statement delivered to or sent by certified mail to the awarding authority and a copy shall be delivered to or sent by certified mail to the subcontractor at the same time. The reply shall contain a detailed breakdown of the balance due under the subcontract including any amount due for extra labor and materials furnished to the general contractor and of the amount due for each claim made by the general contractor against the subcontractor."

(E) "Within fifteen days after receipt of the demand by the awarding authority, but in no event prior to the seventieth day after substantial completion of the subcontract work, the awarding authority shall make direct payment to the subcontractor of the balance due under the subcontract including any amount due for extra labor and materials furnished to the general contractor, less any amount (I) retained by the awarding authority as the estimated cost of completing the incomplete or unsatisfactory items of work, (II) specified in any court proceedings barring such payment, or (III) disputed by the general contractor in the sworn reply; provided, that the awarding authority shall not deduct from a direct payment any amount as provided in part (III) if the reply is not sworn to, or for which the sworn reply does not contain the detailed breakdown required by subparagraph (D). The awarding authority shall make further direct payments to the subcontractor forthwith after the removal of the basis for deductions from direct payments made as provided in parts (I) and (II) of this subparagraph.

MG-1

(F) "The awarding authority shall forthwith deposit the amount deducted from a direct payment as provided in part (III) of subparagraph (E) in an interest-bearing joint account in the names of the general contractor and the subcontractor in a bank in Massachusetts selected by the awarding authority or agreed upon by the general contractor and the subcontractor and shall notify the general contractor and the subcontractor of the date of the deposit and the bank receiving the deposit. The bank shall pay the amount of the account, including accrued interest, as provided in an agreement between the general contractor and the subcontractor or as determined by decree of a court of competent jurisdiction."

(G) "All direct payments and all deductions from demands for direct payments deposited in an interest-bearing account or accounts in a bank pursuant to subparagraph (F) shall be made out of amounts payable to the general contractor at the time of receipt of a demand for direct payment from a subcontractor and out of amounts which later become payable to the general contractor and in the order of receipt of such demands from subcontractors. All direct payments shall discharge the obligation of the awarding authority to the general contractor to the extent of such payment."

(H) "The awarding authority shall deduct from payments to a general contractor amounts which, together with the deposits in interest-bearing accounts pursuant to subparagraph (F), are sufficient to satisfy all unpaid balances of demands for direct payment received from subcontractors. All such amounts shall be earmarked for such direct payments, and the subcontractors shall have a right in such deductions prior to any claims against such amounts by creditors of the general contractor."

SECTION 39N

"If, during the progress of the work, the contractor or the awarding authority discovers that the actual subsurface or latent physical conditions encountered at the site differ substantially or materially from those shown on the plans or indicated in the contract documents, either the contractor or the contracting authority may request an equitable adjustment in the contract price of the contract applying to work affected by the differing site conditions. A request for such an adjustment shall be in writing and shall be delivered by the party making such claim to the other party as soon as possible after such conditions are discovered. Upon receipt of such a claim from a contractor, or upon its own initiative, the contracting authority shall make an investigation of such physical conditions, and, if they differ substantially or materially from those shown on the plans or indicated in the contract documents or from those ordinarily encountered and generally recognized as inherent in work of the character provided for in the plans and contract documents and are of such a nature as to cause an increase or decrease in the cost of performance of the work or a change in the construction methods required for the performance of the work which results in an increase or decrease in the cost of the work, the contracting authority shall make an equitable adjustment in the contract price and the contract shall be modified in writing accordingly."

SECTION 39 O (A) & (B)

(A) "The awarding authority may order the general contractor in writing to suspend, delay, or interrupt all or any part of the work for such period of time as it may determine to be appropriate for the convenience of the awarding authority; provided however, that if there is a suspension, delay or interruption for fifteen days or more or due to a failure of the awarding authority to act within the time specified in this contract, the awarding authority shall make an adjustment in the contract price for any increase in the cost of performance of this contract but shall not include any profit to the general contractor on such increase; and provided further, that the awarding authority shall not make any adjustment in the contract price under this provision for any suspension, delay, interruption or failure to act to the extent that such is due to any cause for which this contract provides for an equitable adjustment of the contract price under any other contract provisions."

(B) "The general contractor must submit the amount of a claim under provision (A) to the awarding authority in writing as soon as practicable after the end of the suspension, delay, interruption or failure to act and, in any event, not later than the date of final payment under this contract and, except for costs due to a suspension order, the awarding authority shall not approve any costs in the claim incurred more than twenty days before the general contractor notified the awarding authority in writing of the act of failure to act involved in the claim.

MG-2

CONFLICT OF INTEREST STATEMENT

I

This is to certify no municipal employee of the Town of Yarmouth, nor any spouse, parent, child, brother or sister of such municipal employee, has any financial interest in the bidder or this contract:

Titled: _______________________________ Dated: _____________

Date:

Signature:

Name:

Position:

II

I/We, the undersigned or immediate family hereby certify that the following Town of Yarmouth Employee or employees have a financial interest in the business, company, partnership or similar entity which is bidding on the contract:

Titled:

Dated:

Name of Employee(s):

Date:

Signature:

By:

Position:

III

Notarization required for either certification.

Sworn to before me this day of , 20

Notary Public Date Seal

IV

If any principal of your firm and/or if any employee of your firm, who will work on this project, has ever been an employee of the Town of Yarmouth, list them below:

Name:

Town Department where worked:

Last date of employment with Town:

COI-1

CERTIFICATE OF NON-COLLUSION

The undersigned certifies under penalties of perjury that this bid or proposal has been made and submitted in good faith and without collusion of fraud with any other person. As used in this certification, the word "person" shall mean any natural person, business, partnership, corporation, union, committee, club, or other organization, entity, or group of individuals.

The undersigned certifies that (please circle one of the following) they are / are not a certified minority business enterprise or a woman owned business.

Respectfully submitted, Name of bidder Street

BY:

(City and State)

TITLE:

DATE:

Seal - If bid is by a corporation

ATTESTED:

NC-1

STATE CERTIFICATIONS

Pursuant to M.G.L. Ch. 62C, sec. 49A, I certify under the penalties of perjury that I, to my best knowledge and belief, have complied with all laws of the Commonwealth of Massachusetts relating to taxes, reporting of employees and contractors, and withholding and remitting child support.

(Name of individual submitting bid or proposal)

(Signature of individual submitting bid or proposal)

(Name of Business)

(Social Security Number or Federal Identification Number)

(Date)

Sworn to before me this _____________day of ___________________, 20___.

(Notary Public)

SC-1

BID ITEMS

FOR WATER WORKS SUPPLIES

CONTRACT 2018-4-WTR

A conditional or qualified bid will not be accepted.

Each bidder is responsible for reading and being thoroughly familiar with the contract document. The failure or omission of any bidder to do any of the foregoing shall in no way relieve any bidder from any obligation in respect to this bid.

After bids have been submitted, the bidder shall not assert that there was a misunderstanding concerning the quantities of materials or work required.

Bid price shall include cost of equipment, materials, shipping, and all other labor costs per the bid specifications.

The successful bidder agrees to complete work as stated in the bid specifications for the following price:

The OWNER reserves the right to extend the contract under the same terms and conditions for a maximum period of three (3) years from date of expiration. Such extension will be at the sole discretion of the OWNER and will require the execution of an agreement page, a contract extension of term, and bonds and insurances to be renewed by the contractor each year.

Bid Item*

ITEM NO. 1*

12" X 12" Mechanical Joint Tee

________________________________________ ______________________ Dollars ($

) per unit Extended Total About 3 Tees

ITEM NO. 2*

12" X 10" Mechanical Joint Tee

________________________________________ ______________________ Dollars ($

About 1 Tee

ITEM NO. 3*

12" X 8" Mechanical Joint Tee

________________________________________ ______________________ Dollars ($

About 6 Tees

BI-1

ITEM NO. 4*

12" X 6" Mechanical Joint Tee

________________________________________ ______________________ Dollars ($

About 18 Tees

ITEM NO. 5*

10" X 10" Mechanical Joint Tee ________________________________________ ______________________ Dollars ($

About 1 Tee

ITEM NO. 6*

10" X 8" Mechanical Joint Tee ________________________________________ ______________________ Dollars ($

About 1 Tee

ITEM NO. 7*

10" X 6" Mechanical Joint Tee

________________________________________ ______________________ Dollars ($

About 2 Tees

ITEM NO. 8*

8" X 8" Mechanical Joint Tee

________________________________________ ______________________ Dollars ($

About 20 Tees

ITEM NO. 9*

8" X 6" Mechanical Joint Tee

________________________________________ ______________________ Dollars ($

About 30 Tees

ITEM NO. 10*

6" X 6" Mechanical Joint Tee

________________________________________ ______________________ Dollars ($

About 2 Tees

BI-2

ITEM NO. 11*

12" X 10" Mechanical Joint Reducer

________________________________________ ______________________ Dollars ($

About 2 Reducers

ITEM NO. 12*

12" X 8" Mechanical Joint Reducer

________________________________________ ______________________ Dollars ($

About 2 Reducers

ITEM NO. 13*

12" X 6" Mechanical Joint Reducer ________________________________________ ______________________ Dollars ($

About 2 Reducers

ITEM NO. 14*

10" X 8" Mechanical Joint Reducer ________________________________________ ______________________ Dollars ($

About 2 Reducers

ITEM NO. 15*

10" X 6" Mechanical Joint Reducer ________________________________________ ______________________ Dollars ($

About 2 Reducers

ITEM NO. 16*

8" X 6" Mechanical Joint Reducer

________________________________________ ______________________ Dollars ($

About 1 Reducer

ITEM NO. 17*

12" X 1/16" Mechanical Joint Bend ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 bends

BI-3

ITEM NO. 18*

12" X 1/8" Mechanical Joint Bend ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 Bends

ITEM NO. 19*

12" X 1/4" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

About 4 Bends

ITEM NO. 20*

10" X 1/16" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Bends

ITEM NO. 21*

10" X 1/8" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Bends

ITEM NO. 22*

10" X 1/4" Mechanical Joint Bends

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

About 2 Bends

ITEM NO. 23*

8" X 1/16" Mechanical Joint Bend ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 bends

ITEM NO. 24*

8" X 1/8" Mechanical Joint Bend ________________________________________ ______________________ Dollars ($ ) per unit Extended Total

About 4 Bends

BI-4

ITEM NO. 25*

8" X 1/4" Mechanical Joint Bend ________________________________________ ______________________ Dollars ($ ) per unit Extended Total

About 4 Bends

ITEM NO. 26*

6" X 1/16" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 Bends

ITEM NO. 27*

6" X 1/8" Mechanical Joint Bend ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 Bends

ITEM NO. 28*

6" X 1/4" Mechanical Joint Bends

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

About 4 Bends

ITEM NO. 29*

12" X 8" Mechanical Joint Anchor Tee ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Anchor Tees

ITEM NO. 30*

12" X 6" Mechanical Joint Anchor Tee ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Anchor Tee

ITEM NO. 31*

10" X 8" Mechanical Joint Anchor Tee

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

About 1 Anchor Tee

BI-5

ITEM NO. 32*

10" X 6" Mechanical Joint Anchor Tee ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Anchor Tee

ITEM NO. 33*

8" X 8" Mechanical Joint Anchor Tee ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Anchor Tees

ITEM NO. 34*

8" X 6" Mechanical Joint Anchor Tee ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 26 Anchor Tees

ITEM NO. 35*

6" X 6" Mechanical Joint Anchor Tee ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Anchor Tees

ITEM NO. 36*

12" X 12" Stainless Steel Tapping Sleeve ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Tapping Sleeve

ITEM NO. 37*

12" X 10" Stainless Steel Tapping Sleeve ________________________________________ ______________________ Dollars ($ ) per unit Extended Total

About 2 Tapping Sleeves

ITEM NO. 38*

12" X 8" Stainless Steel Tapping Sleeve ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 Tapping Sleeves

BI-6

ITEM NO. 39*

12" X 6" Stainless Steel Tapping Sleeve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 Tapping Sleeves

ITEM NO. 40*

10" X 10" Stainless Steel Tapping Sleeve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Tapping Sleeve

ITEM NO. 41*

10" X 8" Stainless Steel Tapping Sleeve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

About 4 Tapping Sleeves

ITEM NO. 42*

10" X 6" Stainless Steel Tapping Sleeve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 Tapping Sleeves

ITEM NO. 43*

8" X 8" Stainless Steel Tapping Sleeve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 Tapping Sleeves

ITEM NO. 44*

8" X 6" Stainless Steel Tapping Sleeve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 4 Tapping Sleeves

ITEM NO. 45*

6" X 6" Stainless Steel Tapping Sleeve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 18 Tapping Sleeves

BI-7

ITEM NO. 46*

12" Tapping Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Tapping Valve

ITEM NO. 47*

10" Tapping Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Tapping Valves

ITEM NO. 48*

8" Tapping Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 8 Tapping Valves

ITEM NO. 49*

6" Tapping Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Tapping Valves

ITEM NO. 50*

4" Gate Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Gate Valve

ITEM NO. 51*

6" Gate Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 60 Gate Valves

ITEM NO. 52*

8" Gate Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 24 Gate Valves

BI-8

ITEM NO. 53*

10" Gate Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Gate Valves

ITEM NO. 54*

12" Gate Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 8 Gate Valves

ITEM NO. 55*

16" Butterfly Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Butterfly Valve

ITEM NO. 56*

20" Butterfly Valve

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Butterfly Valve

ITEM NO. 57*

Five (5) Foot Bury Gate Boxes

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 60 Gate Boxes

ITEM NO. 58*

1" Water Box Risers

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 50 Risers

ITEM NO. 59*

1-1/2" Water Box Risers

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 100 Risers

BI-9

ITEM NO. 60*

2" Water Box Riser ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 50 Risers

ITEM NO. 61*

3" Water Box Riser ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 50 Risers

ITEM NO. 62*

4" Water Box Riser ________________________________________ ______________________ Dollars ($ ) per unit Extended Total)

About 25 Risers

ITEM NO. 63*

6" Water Box Riser ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 15 Risers

ITEM NO. 64*

6" Mechanical Joint Restraint Device ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Restraint Devices

ITEM NO. 65*

8" Mechanical Joint Restraint Device ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Restraint Devices

ITEM NO. 66*

10" Mechanical Joint Restraint Device ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Restraint Devices

BI-10

ITEM NO. 67*

12" Mechanical Joint Restraint Device ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Restraint Devices

ITEM NO. 68*

4" Bell Joint and Slip-Joint Pipe Repair Clamp

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Repair Clamps

ITEM NO. 69*

6" Bell Joint and Slip-Joint Pipe Repair Clamp

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

About 6 Repair Clamps

ITEM NO. 70*

8" Bell Joint and Slip-Joint Pipe Repair Clamp

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Repair Clamps

ITEM NO. 71*

10" Bell Joint and Slip-Joint Pipe Repair Clamp

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 3 Repair Clamps

ITEM NO. 72*

12" Bell Joint and Slip-Joint Pipe Repair Clamp

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 3 Repair Clamps

ITEM NO. 73*

16" Bell Joint and Slip-Joint Pipe Repair Clamp

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Repair Clamps

BI-11

ITEM NO. 74*

20" Bell Joint and Slip-Joint Pipe Repair Clamp

________________________________________ ______________________ Dollars ($ ) per unit Extended Total

About 2 Repair Clamps

ITEM NO. 75*

4" X 2" Pipe Cap

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Caps

ITEM NO. 76*

6" X 2" Pipe Cap

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Caps

ITEM NO. 77*

8" X 2" Pipe Cap

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Caps

ITEM NO. 78*

10" X 2" Pipe Cap

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Caps

ITEM NO. 79*

12" X 2" Pipe Cap

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Caps

ITEM NO. 80*

16" X 2" Pipe Cap

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Caps

BI-12

ITEM NO. 81*

20" X 2" Pipe Cap

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Caps

ITEM NO. 82*

12" Grade Offset (Fire Hydrant Connector Pipe) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Connector Pipe

ITEM NO. 83*

24" Grade Offset (Fire Hydrant Connector Pipe) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 1 Connector Pipe

ITEM NO. 84*

8" X 1/32" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Bends

ITEM NO. 85*

6" X 1/32" Mechanical Joint Bend

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Bends

ITEM NO. 86*

5/8" X 3/4" X 1" Compression Angle Meter Stop

(B-24258 Ball Valve with Optional Handle)

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 50 Angle Meter Stops

ITEM NO. 87*

3/4" X 3/4" F.I.P. X F.I.P. Curb Stop (B-20283 Ball Curb Valve) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Curb Stops

BI-13

ITEM NO. 88*

1" X 1" F.I.P. X F.I.P. Curb Stop (B-20283 Ball Curb Valve) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 100 Curb Stops

ITEM NO. 89*

1-1/2" X 1-1/2" F.I.P. X F.I.P. Curb Stop (B-20283 Ball Curb Valve) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Curb Stops

ITEM NO. 90*

2" X 2" F.I.P. X F.I.P. Curb Stop (B-20283 Ball Curb Valve) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Curb Stops

ITEM NO. 91*

1" X 1" CTS OD Curb Stop (B-25155 Ball Valve on Both Ends) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 100 Curb Stops

ITEM NO. 92*

1-1/2" X 1-1/2" CTS OD Curb Stop (B-25155 Ball Valve on Both Ends) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 5 Curb Stops

ITEM NO. 93*

2" X 2" CTS OD Curb Stop (B-25155 Ball Valve on Both Ends) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Curb Stops

BI-14

ITEM NO. 94*

3/4" CTS OD Corporation ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 5 Corporations

ITEM NO. 95*

3/4" x 1" CTS OD Corporation ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Corporations

ITEM NO. 96*

1" CTS OD Corporation ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 100 Corporations

ITEM NO. 97*

1-1/2" CTS OD Corporation

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 5 Corporations

ITEM NO. 98*

2" CTS OD Corporation

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Corporations

ITEM NO. 99*

3/4" X 3/4" CTS OD Three-Part Union

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 5 Three-Part Unions

ITEM NO. 100*

1" X 1" CTS OD Three-Part Union

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 100 Three-Part Unions

BI-15

ITEM NO. 101*

1-1/2" X 1-1/2" CTS OD Three-Part Union

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 5 Three-Part Unions

ITEM NO. 102*

2" X 2" CTS OD Three-Part Union

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Three-Part Unions

ITEM NO. 103*

3/4" M.I.P. X 1" CTS OD Straight Coupling

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Straight Couplings

ITEM NO. 104*

1" M.I.P. X 1" CTS OD Straight Coupling

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 100 Straight Couplings

ITEM NO. 105*

1-1/2" M.I.P. X 1-1/2" CTS OD Straight Coupling

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 5 Straight Couplings

ITEM NO. 106*

2" M.I.P. X 2" CTS OD Straight Coupling

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Straight Couplings

ITEM NO. 107*

3/4" F.I.P. X 1" CTS OD Straight Coupling

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Straight Couplings

BI-16

ITEM NO. 108*

1" F.I.P. X 1" CTS OD Straight Coupling

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 50 Straight Couplings

ITEM NO. 109*

1" F.I.P. X 2" CTS OD Straight Coupling ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Straight Couplings

ITEM NO. 110*

1-1/2" F.I.P. X 1-1/2" CTS OD Straight Coupling ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 5 Straight Couplings

ITEM NO. 111*

2" F.I.P. X 2" CTS OD Straight Coupling ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Straight Couplings

ITEM NO. 112*

3/4" M.I.P. X 3/4" IP Pack Joint Coupling

________________________________________ ______________________ Dollars ($ ) per unit

About 20 Pack Joint Couplings

ITEM NO. 113*

1" M.I.P. X 1" IP Pack Joint Coupling ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 100 Pack Joint Couplings

ITEM NO. 114*

1-1/2" M.I.P. X 1-1/2" IP Pack Joint Coupling ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 5 Pack Joint Couplings

BI-17

ITEM NO. 115*

2" M.I.P. X 2" IP Pack Joint Coupling

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Pack Joint Couplings

ITEM NO. 116*

1" F.I.P. X 1" IP Pack Joint Coupling ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Pack Joint Couplings

ITEM NO. 117*

1-1/2" F.I.P. X 1-1/2" IP Pack Joint Coupling ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 5 Pack Joint Couplings

ITEM NO. 118*

2" F.I.P. X 2" IP Pack Joint Coupling ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Pack Joint Couplings

ITEM NO. 119*

3/4" F x F Ball Valve ________________________________________ ______________________ Dollars ($ ) per unit Extended Total

About 20 Ball Valves

ITEM NO. 120*

1" F x F Ball Valve ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 100 Ball Valves

ITEM NO. 121*

1-1/2" F x F Ball Valve ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 5 Ball Valves

BI-18

ITEM NO. 122*

2" F x F Ball Valve ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 20 Ball Valves

ITEM NO. 123*

Five (5) Foot Bury Curb Box ________________________________________ ______________________ Dollars ($ ) per unit Extended Total

About 200 Curb Boxes

ITEM NO. 124*

16" Curb Box Extensions ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 50 Curb Box Extensions

ITEM NO. 125*

5/8” Meter Pit (18” Tube #203CS1848-LABL, Lid #790018, Pad #790153) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 100 Pits

ITEM NO. 126*

Dual 5/8” Meter Pit (Tube #203CD1848-LABL000055, Lid #780069, Pad #790153) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 30 Pits

ITEM NO. 127*

1" Meter Pit (Tube #330CS1848FABL, Lid #780069, Pad #790153) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 30 Pits

ITEM NO. 128*

2" Meter Pit (Tube #550VS2748LAB, Frame #700098-1, Side Lock Lid #282925, Pad #790058) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Pits

BI-19

ITEM NO. 129*

1" Polyethylene Tubing ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 15,000 Feet

ITEM NO. 130*

2" Polyethylene Tubing ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 5,000 Feet

ITEM NO. 131*

1” H-15526 Quarter Bend Union CTS Compression X CTS Compression

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Quarter Bend Unions

ITEM NO. 132*

2” H-15526 Quarter Bend Union CTS Compression X CTS Compression

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Quarter Bend Unions

ITEM NO. 133*

1” H-15531 Quarter Bend Coupling CTS Compression X M.I.P.

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Quarter Bend Coupling

ITEM NO. 134*

2” H-15531 Quarter Bend Coupling CTS Compression X M.I.P.

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Quarter Bend Coupling

BI-20

ITEM NO. 135*

1” H-15533 Quarter Bend Coupling CTS Compression X F.I.P.

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Quarter Bend Coupling

ITEM NO. 136*

2” H-15533 Quarter Bend Coupling CTS Compression X F.I.P.

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Quarter Bend Coupling

ITEM NO. 137*

1” H-15172 CTS Compression X F.I.P.

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 10 Units

ITEM NO. 138*

Five (5) Foot Bury Fire Hydrant (Open Left) ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 50 Hydrants

ITEM NO. 139*

5' Hydrant Drain Rods

________________________________________ ______________________ Dollars ($ ) per unit

About 6 Drain Rods

ITEM NO. 140*

5-1/2' Hydrant Drain Rods

________________________________________ ______________________ Dollars ($ ) per unit

About 6 Drain Rods

ITEM NO. 141*

Break-Away Flange Kit

________________________________________ ______________________ Dollars ($ ) per unit

About 12 Kits

BI-21

ITEM NO. 142*

Drain Support Assembly

________________________________________ ______________________ Dollars ($ ) per unit

About 12 Assemblies

ITEM NO. 143*

6" x 15" Full Circle Clamp ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Full Circle Clamps

ITEM NO. 144*

8" x 15" Full Circle Clamp ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Full Circle Clamps

ITEM NO. 145*

10" x 15" Full Circle Clamp ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Full Circle Clamps

ITEM NO. 146*

12" x 15" Full Circle Clamp ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Full Circle Clamps

ITEM NO. 147*

16" x 15" Full Circle Clamp ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Full Circle Clamps

ITEM NO. 148*

20" x 15" Full Circle Clamp ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 2 Full Circle Clamps

BI-22

ITEM NO. 149*

6" Coupling ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 32 Couplings

ITEM NO. 150*

8" Coupling ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 35 Couplings

ITEM NO. 151*

10" Coupling

________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Couplings

ITEM NO. 152*

12" Coupling ________________________________________ ______________________ Dollars ($ ) per unit Extended Total About 6 Couplings

ITEM NO. 153*

16"…